Related
Hi,
I have problem. When i oc my P760, my phone was bricked and KDZ flasher doesn't see my device... After many attempts LG Support tool searched my phone and via "Recovery mod" flashed rom, but V10H was last (V20B now in Czech Republic). I am aware that must flash p1/p2 ,but fastboot do this:
C:\recimgs>fastboot flash x-loader x-loader.img(bootloader) partition type : x-loader
(bootloader) max download byte : 10485760 Byte sending 'x-loader' (384 KB)...
OKAY [ 0.589s]
writing 'x-loader'...
FAILED (remote: Not supported partition)
finished. total time: 0.614s
Fastboot finds my device fine, support tool finds my device fine, but KDZ updater still shows Port(USB or Serial)Not Found!
I trying everything.. my desktop,notebook,every usb, roms,custom roms.... Still nothing
Thank you for your answers........
Hi, well a friend of a friend gifted me an LG L9 Model P778G (Carrier: Personal Telecom Country: Argentina). The only thing that he told me was that he dropped his phone and it didn´t turn on back anymore. I externally charged the battery. The phone doesn´t turn on, sometimes when I connect it to my PC (windows XP) it recognizes it as OMAP4430 but only when battery is not connected (when I connect battery it says unrecognized usb device, when I press Vol+ and Vol- with or without battery it also says unrecognized device. Already tried to flash with LG Mobile Support and KDZ but it says phone not connected. I would like to know how can i get the phone back working and if possible with Jelly Bean (I don´t know if phone had JB or ICS, but of what I almost certain is that it was never modified because it belonged to an old person). Please explain with detail though I'm not used to LG (HTC & Samsung owner) and don't know much of it.Thanks to everyone!
USB connection is unstable, it comes nad goes
philohtc said:
USB connection is unstable, it comes nad goes
Click to expand...
Click to collapse
Hi philohtc, you could read and try thishttp://forum.xda-developers.com/showthread.php?t=2677611
Cheers. Good luck.
BajoPrimate said:
Hi philohtc, you could read and try thishttp://forum.xda-developers.com/showthread.php?t=2677611
Cheers. Good luck.
Click to expand...
Click to collapse
Hi, my device doesn´t turn on at all, the only signal i have is the OMAP driver coming and going and sometimes staying a little while, the LG Mobile Support Tool doesn't see the cellphone, hope you can help me, thanks!
philohtc said:
Hi, well a friend of a friend gifted me an LG L9 Model P778G (Carrier: Personal Telecom Country: Argentina). The only thing that he told me was that he dropped his phone and it didn´t turn on back anymore. I externally charged the battery. The phone doesn´t turn on, sometimes when I connect it to my PC (windows XP) it recognizes it as OMAP4430 but only when battery is not connected (when I connect battery it says unrecognized usb device, when I press Vol+ and Vol- with or without battery it also says unrecognized device. Already tried to flash with LG Mobile Support and KDZ but it says phone not connected. I would like to know how can i get the phone back working and if possible with Jelly Bean (I don´t know if phone had JB or ICS, but of what I almost certain is that it was never modified because it belonged to an old person). Please explain with detail though I'm not used to LG (HTC & Samsung owner) and don't know much of it.Thanks to everyone!
Click to expand...
Click to collapse
I believe you still need to install the fastboot driver again.
Take a look at lelus fastboot script thread here - http://forum.xda-developers.com/showthread.php?p=41768774
Read the part in the thread about installing the drivers and about the original fastboot thread.
That should get you ready to be able to do the offline or online kdz flash
xdrc45 said:
I believe you still need to install the fastboot driver again.
Take a look at lelus fastboot script thread here - http://forum.xda-developers.com/showthread.php?p=41768774
Read the part in the thread about installing the drivers and about the original fastboot thread.
That should get you ready to be able to do the offline or online kdz flash
Click to expand...
Click to collapse
Hi, now the phones stays for a while, but still can't get it recognized at KDZ or LG MST.
PS: when installing fastboot drivers after connecting battery it says an LG Logo should appear on screen but it doesn't, thanks for your support
philohtc said:
Hi, now the phones stays for a while, but still can't get it recognized at KDZ or LG MST.
PS: when installing fastboot drivers after connecting battery it says an LG Logo should appear on screen but it doesn't, thanks for your support
Click to expand...
Click to collapse
Use the fastboot script and flash the ICS Uboot and Xloaders
xdrc45 said:
Use the fastboot script and flash the Uboot and Xloaders
Click to expand...
Click to collapse
Sorry to bother, could you give me links to those files for this model? It's my first LG
philohtc said:
Sorry to bother, could you give me links to those files for this model? It's my first LG
Click to expand...
Click to collapse
It's in the lelus fastboot script, option #4
http://forum.xda-developers.com/showthread.php?p=41768774
xdrc45 said:
It's in the lelus fastboot script, option #4
http://forum.xda-developers.com/showthread.php?p=41768774
Click to expand...
Click to collapse
I selected option 6 because option 4 gaved error
This is my log
Plug USB cable
wait 4 seconds and put battery back in.
waiting for OMAP44xx device...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
[* said:
read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x4
Checksum Subblock: 0x15
CHIP: 4430
IDEN: 2f8a54c5c2fdd39e7dbe73b14991c29b1b9d0ec8
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c0ea6412fdcb7f6
CRC0: 9c669ad9
CRC1: 682adccf
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4
wait 5-lelelel...
[*] msg size = 4
usb_write 21552
[*] data size = 21552
usb_close
Reopen usb...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb read = aabbccdd
accepted 2ndstage response
sending image to target...
size = 246272
usb_write 4
usb_write 246272
** Done **
< waiting for device >
sending 'x-loader' (384 KB)...
OKAY [ 0.203s]
writing 'x-loader'...
FAILED (remote: partition does not exist)
finished. total time: 0.219s
sending 'u-boot' (1024 KB)...
OKAY [ 0.531s]
writing 'u-boot'...
FAILED (remote: partition does not exist)
finished. total time: 0.547s
Done
Click to expand...
Click to collapse
philohtc said:
I selected option 6 because option 4 gaved error
This is my log
Click to expand...
Click to collapse
OK so you flashed the JB Uboot and Xloader? I'm not at my PC to see the screen options. Try running the kdz now.
xdrc45 said:
OK so you flashed the JB Uboot and Xloader? I'm not at my PC to see the screen options. Try running the kdz now.
Click to expand...
Click to collapse
This happened when I flashed the JB Uboot and Xloader
< waiting for device >
sending 'x-loader' (384 KB)...
OKAY [ 0.203s]
writing 'x-loader'...
FAILED (remote: partition does not exist)
finished. total time: 0.219s
sending 'u-boot' (1024 KB)...
OKAY [ 0.531s]
writing 'u-boot'...
FAILED (remote: partition does not exist)
finished. total time: 0.547s
Done
-----------------------------------------------------------------
I ran KDZ and got the following as usual:
[R&D Test Tools Log File]
21:58:55 : Launching SW update
21:58:55 : Unpacking KDZ
21:59:12 : KDZ file extraced
21:59:30 : Files were extracted.
21:59:30 : LGMobileDL Load.
21:59:30 : Port = -1
21:59:30 : Connecting to phone
21:59:30 : PHONE WAS NOT FOUND!
21:59:32 : ===FINISHED===
philohtc said:
This happened when I flashed the JB Uboot and Xloader
< waiting for device >
sending 'x-loader' (384 KB)...
OKAY [ 0.203s]
writing 'x-loader'...
FAILED (remote: partition does not exist)
finished. total time: 0.219s
sending 'u-boot' (1024 KB)...
OKAY [ 0.531s]
writing 'u-boot'...
FAILED (remote: partition does not exist)
finished. total time: 0.547s
Done
-----------------------------------------------------------------
I ran KDZ and got the following as usual:
[R&D Test Tools Log File]
21:58:55 : Launching SW update
21:58:55 : Unpacking KDZ
21:59:12 : KDZ file extraced
21:59:30 : Files were extracted.
21:59:30 : LGMobileDL Load.
21:59:30 : Port = -1
21:59:30 : Connecting to phone
21:59:30 : PHONE WAS NOT FOUND!
21:59:32 : ===FINISHED===
Click to expand...
Click to collapse
Run the lesus fastbot script again and select option 1 and make sure the drivers are installed. Then try running option #4 again... If successful then try the offline flash here - http://forum.xda-developers.com/showthread.php?t=2085344
And check out this thread - http://forum.xda-developers.com/showthread.php?p=48834061
xdrc45 said:
Run the lesus fastbot script again and select option 1 and make sure the drivers are installed. Then try running option #4 again... If successful then try the offline flash here - http://forum.xda-developers.com/showthread.php?t=2085344
And check out this thread - http://forum.xda-developers.com/showthread.php?p=48834061
Click to expand...
Click to collapse
It says
waiting for 2ndstage response...
usb_read 4
usb_read got: 0, expected: 4, errno: 31
usb_read got GEN_FAILURE - got: 0, expected: 4, errno: 31
usb_read failed: 31
usb read = 0
unexpected 2ndstage response
< waiting for device >
AND STAYS THERE ??
philohtc said:
It says
waiting for 2ndstage response...
usb_read 4
usb_read got: 0, expected: 4, errno: 31
usb_read got GEN_FAILURE - got: 0, expected: 4, errno: 31
usb_read failed: 31
usb read = 0
unexpected 2ndstage response
< waiting for device >
AND STAYS THERE ??
Click to expand...
Click to collapse
Ok have you tried put the device into S/W mode now and see if it's detected? Power off the device, press and hold the volume (+) up button and connect the USB cable from the PC to the device.
xdrc45 said:
Ok have you tried put the device into S/W mode now and see if it's detected? Power off the device, press and hold the volume (+) up button and connect the USB cable from the PC to the device.
Click to expand...
Click to collapse
I could complete step 4 it sended uboot and xloader but it gaved error when it tried to write them, I dont know when it is in S/W mode though Screen is always black. In the offline method I deactivate the wifi card and get the connection in line error but it doesn't appear the pop-up of the language.
philohtc said:
I could complete step 4 it sended uboot and xloader but it gaved error when it tried to write them, I dont know when it is in S/W mode though Screen is always black. In the offline method I deactivate the wifi card and get the connection in line error but it doesn't appear the pop-up of the language.
Click to expand...
Click to collapse
You can try to run the B2CAppSetup.exe, after opening the app, select you phone model and letting it install the drivers, then unplug and plug the USB cable back in and see what happens.
Edit - Also when you connect the device to your PC when in fastboot mode what does it show up as in the PC's device manager?
xdrc45 said:
You can try to run the B2CAppSetup.exe, after opening the app, select you phone model and letting it install the drivers, then unplug and plug the USB cable back in and see what happens.
Edit - Also when you connect the device to your PC when in fastboot mode what does it show up as in the PC's device manager?
Click to expand...
Click to collapse
Under Android Phone > OMAP4430FastBoot USB Device. Can't see where to select model, apparently is automatic recognition
xdrc45 said:
You can try to run the B2CAppSetup.exe, after opening the app, select you phone model and letting it install the drivers, then unplug and plug the USB cable back in and see what happens.
Edit - Also when you connect the device to your PC when in fastboot mode what does it show up as in the PC's device manager?
Click to expand...
Click to collapse
any idea?
philohtc said:
any idea?
Click to expand...
Click to collapse
I'm not sure yet... We need to get the ICS Uboot and Xloaders to install so that you can get into S/W mode.
I'm trying to research on an answer for you.
These L9 are a real pain in the butt.
---------- Post added 30th March 2014 at 12:06 AM ---------- Previous post was 29th March 2014 at 11:47 PM ----------
philohtc said:
any idea?
Click to expand...
Click to collapse
Run the lelus fasrboot again and flash the JB Uboot and Xloader and show mW the log again
Hello everybody. (sorry for my writing mistakes )
XT910 with stock firmware: http://savepic.org/6550017.png
IMEI - EMEA region
Worked fine.
But then...
Through BMM installed - LiquidSmooth KitKat (http://forum.xda-developers.com/showthread.php?t=2782971)
and then
"SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml.zip"
(I do not know why. It was not me. But I want to help restore the phone.)
When the process is finished (Successfully О_о), the phone no longer worked.
Now:
Normally mode, Recovery - not working:
Invalid Flash Mode (S) (Boot Failure)
0A.77
To return to normal mode - first press power key to poser down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X004E)
Invalid CG OTV (CG: system)
What we tried to install (AP Fastboot - RSDLite 6.1.5):
- SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_NZ_CFC_HWp2b_SIGNED.xml.zip
- SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml.zip
- SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_MEA_RETAIL_CFC_HWp2b_SIGNED.xml.zip
- SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSO2DE_HWp2b_Service1FF_fastboot.xml.zip
- SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
- 673.94.324.XT910.AsiaRetail.en.03.xml.
- 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RTFE1007.0R_USASPDRJBRTFR_P013_A014_p2b_S1FF_fb_CFC.xml.zip (Retail FR)
- 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip (Retail GB)
Always:
11/28/14 11:48:56 [Device ID: 0] 1/19 flash mbm "allow-mbmloader-flashing-mbm.bin"
11/28/14 11:48:56 [Device ID: 0] 2/19 reboot-bootloader
11/28/14 11:49:00 [Device ID: 0] 3/19 flash mbmloader "mbmloader.bin"
11/28/14 11:49:01 [Device ID: 0] 4/19 flash mbm "mbm.bin"
11/28/14 11:49:02 [Device ID: 0] 5/19 reboot-bootloader
11/28/14 11:49:06 [Device ID: 0] 6/19 flash cdt.bin "cdt.bin_signed"
11/28/14 11:49:06 ERROR: 6/19 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL. - on device ID 0.
11/28/14 11:49:06 [Device ID: 0] 6/19 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL.
11/28/14 11:49:06 ERROR: Failed flashing process. - on device ID 0.
This metod:
1-download cdt.bin ( http://www.mediafire.com/?ua1nj6ds6r0vtue )
2-download fastboot files ( http://dfiles.eu/files/bih3tmg7b )
3-restart your phone in to bootloader ( fastboot ) mode
4-connect your phone via usb cable
5-open cmd.exe in your pc an go to fastboot files
6-flash cdt.bin via this command -------------------------------------- fastboot flash cdt.bin cdt.bin
7-restart your phone in to stock recovery
8-do triple wipe and restart your phone
Nothing helps! Can you help? What can we do?
Thanks for help...
No one has any ideas?
that's interesting: tried to remove CID and failed, because: (see picture)
Code:
Erasing CID ... INFOCommand Restricted
Wrong command?
And:
Code:
CID:5
XT910S ?
Why can not we delete CID?
Thanks for "help".
Mission completed.
Thread is closed.
did u manage to fix your i have the same problem with you please some one should help,i just want to get my phone back to normal, i have the same firmware with u
jamil1982 said:
did u manage to fix your i have the same problem with you please some one should help,i just want to get my phone back to normal, i have the same firmware with u
Click to expand...
Click to collapse
This is my script for FastBoot (0A:77 Bootloader and for XT910S)
Warning! This will remove your CID!
Use this method only when all other methods have failed.
https :// yadi .sk/d/M2EmR9HKdA3pF
unpack RAR: in C:/MyRecover/
Connect your phone (AP Fastboot mode) to PC.
Run MyRecoverV1.bat
done.
After that, you can install any firmware (RSDLite 6.1.5)
reccomend: Britain Retail 4.1.2 : https :// yadi .sk/d/zcq12jT5d44mu
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
Get Root
Install BMM 0.3.4
Now your phone loaded automatically (without BP TOOLS)
VasyaAgPro said:
This is my script for FastBoot (0A:77 Bootloader and for XT910S)
Warning! This will remove your CID!
Use this method only when all other methods have failed.
https :// yadi .sk/d/M2EmR9HKdA3pF
unpack RAR: in C:/MyRecover/
Connect your phone (AP Fastboot mode) to PC.
Run MyRecoverV1.bat
done.
After that, you can install any firmware (RSDLite 6.1.5)
reccomend: Britain Retail 4.1.2 : https :// yadi .sk/d/zcq12jT5d44mu
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
Get Root
Install BMM 0.3.4
Now your phone loaded automatically (without BP TOOLS)
Click to expand...
Click to collapse
Downloading Right now thank You i will give u feed back:good:
after running my MyRecoverV1.bat see what i got
---------------------------------------------------------------
Delete CID for kwyjibo jr by Vasya
---------------------------------------------------------------
Press any key to continue . . .
---------------------------------------------------------------
getvar:all FAILED (remote: unsupported command)
finished. total time: 0.008s
getvar:all FAILED (remote: unsupported command)
---------------------------------------------------------------
0A3BEC240400A007 fastboot
0A3BEC240400A007 fastboot
CID delete:
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.010s
sending 'mbm' (512 KB)... OKAY [ 0.089s]
writing 'mbm'... OKAY [ 0.486s]
sending 'mbm' (512 KB)... OKAY [ 0.089s]
writing 'mbm'... OKAY [ 0.507s]
finished. total time: 0.596s
rebooting into bootloader... OKAY [ 0.007s]
finished. total time: 0.008s
< waiting for device >
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.011s
rebooting into bootloader... OKAY [ 0.008s]
finished. total time: 0.009s
< waiting for device >
sending 'mbm' (512 KB)... OKAY [ 0.102s]
writing 'mbm'... OKAY [ 0.489s]
sending 'mbm' (512 KB)... OKAY [ 0.103s]
writing 'mbm'... OKAY [ 0.483s]
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.010s
rebooting into bootloader... OKAY [ 0.007s]
< waiting for device >
sending 'mbm' (512 KB)... OKAY [ 0.102s]
writing 'mbm'... OKAY [ 0.488s]
finished. total time: 0.592s
sending 'mbm' (512 KB)... OKAY [ 0.090s]
writing 'mbm'... OKAY [ 0.508s]
finished. total time: 0.599s
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.010s
rebooting into bootloader... OKAY [ 0.006s]
finished. total time: 0.007s
< waiting for device >
cid: 5
finished. total time: 0.018s
Press any key to continue . . .
any help please?
this is what my phone is showing
jamil1982 said:
this is what my phone is showing
Click to expand...
Click to collapse
CID not erased, for 0A:74 BootLoader try to use:
http://forum.xda-developers.com/showthread.php?t=2372614
If you want to check, removed CID or not:
Just see on last line in MyRecoverV1:
Code:
< waiting for device >
[COLOR="Red"]cid: 5[/COLOR]
finished. total time: 0.018s
When CID : DEAD - you win
If another thread not helps you:
Run MyRecoverV2 and MyRecoverV3 and again V1
it should help.
VasyaAgPro said:
CID not erased, for 0A:74 BootLoader try to use:
http://forum.xda-developers.com/showthread.php?t=2372614
If you want to check, removed CID or not:
Just see on last line in MyRecoverV1:
Code:
< waiting for device >
[COLOR="Red"]cid: 5[/COLOR]
finished. total time: 0.018s
When CID : DEAD - you win
If another thread not helps you:
Run MyRecoverV2 and MyRecoverV3 and again V1
it should help.
Click to expand...
Click to collapse
thanks i will check the link please can u give me the easy way on how to make a motorola factory cable? i have some factory cables that came with my polar 3 box whenever i connect the cable from my phone to the system the phone show white led light and my system doesnt recognize the phone so i dont know if the phone is charging or not and im afraid of loosing the power battery,but with normal cable my system recognize it but the white led light doesnt show, thank you once again
---------- Post added at 09:14 AM ---------- Previous post was at 08:45 AM ----------
strange i run all the bat but it give me the same
cid: 5
jamil1982 said:
thanks i will check the link please can u give me the easy way on how to make a motorola factory cable? i have some factory cables that came with my polar 3 box whenever i connect the cable from my phone to the system the phone show white led light and my system doesnt recognize the phone so i dont know if the phone is charging or not and im afraid of loosing the power battery,but with normal cable my system recognize it but the white led light doesnt show, thank you once again
Click to expand...
Click to collapse
Only one way for factory cable: (see picture)
jamil1982 said:
strange i run all the bat but it give me the same
cid: 5
Click to expand...
Click to collapse
Now run MyrecoverV2 and V3, then V1 for check.
VasyaAgPro said:
Only one way for factory cable: (see picture)
Now run MyrecoverV2 and V3, then V1 for check.
Click to expand...
Click to collapse
I run the V2 and V3 then Run the V1 again it showed the same thing, but I noticed its like the number has change from 0a.74 to 0A.74 and now its Showing 0A.75
jamil1982 said:
I run the V2 and V3 then Run the V1 again it showed the same thing, but I noticed its like the number has change from 0a.74 to 0A.74 and now its Showing 0A.75
Click to expand...
Click to collapse
hmm...
now - run all .bat files - V1, then 2, then 3 (after 3 NOT run again 1 !)
and finally "info.bat. (https :// yadi .sk/d/HdYWqS1gdAhfr)
Put info.bat to "MyRecovery" dir and run.
Log insert here.
VasyaAgPro said:
hmm...
now - run all .bat files - V1, then 2, then 3 (after 3 NOT run again 1 !)
and finally "info.bat. (https :// yadi .sk/d/HdYWqS1gdAhfr)
Put info.bat to "MyRecovery" dir and run.
Log insert here.
Click to expand...
Click to collapse
OHHH MY G You are Genius :good: after running Myrecover1 again it deleted the cid everything went smooth and the number on my Ap fastboot display 0A.77 then i run this 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip, it run perfect without any error:laugh: then my phone restart showing Costumer error. Contact Resseller, the i off it and on it to boot menu then select Bp Tools, my phone restart, its time for me to get rid of the Costumer error. Contact Resseller if u can provide me the link i will be very greatfull thanks for everything:good::good::good:
Im rooted using this method http://forum.xda-developers.com/showthread.php?t=2298408 then install BMM Everything went ok only the Costumer error. Contact Resseller but im ok like this thank you so much
xt910 bricked and cant find firmware
Hi,
I also have xt910 razr maxx and i bricked it after installing some kind of custom rom app.
I want to flash stock firmware but all the links on internet are broken. I guess I need this one:
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_ Service1FF_fastboot.xml.zip
Can aybody help me with a working link of this file pls, its kinda urgent.
Thanks.
VasyaAgPro said:
No one has any ideas?
that's interesting: tried to remove CID and failed, because: (see picture)
Code:
Erasing CID ... INFOCommand Restricted
Wrong command?
And:
Code:
CID:5
XT910S ?
Why can not we delete CID?
Click to expand...
Click to collapse
Hello everyone! I have the phone in hard bricked, I read on the forums that you can solve, not my model (xt1524) but other models. I tried some procedures but has not been able to solve anything. Can someone tell me how to call the files I have to try. I tried with Motoflasher but still not valid for my model. So I would try to look for files that I need but do not know their names. Thank you! I read somewhere that would serve certain files that are called programmer.mbm and singleimage.bin. Can someone tell me exactly what they're called to my phone.? Thank you!
Maybe is usefull :
- http://forum.xda-developers.com/moto-e-2015/general/stock-firmware-images-t3049047
- http://techtrickz.com/how-to/reinstall-stock-firmware-on-2nd-generation-moto-e-2015/
thanks, but the firmware is I, I can not install it because not light! I can only access it via the "Qualcomm HS-USB QDLoader 9008". Reading the various forums say that you need the program Motoflasher and certain files to switch it on and enter Fastboot. The problem is that I do not know which files I need.
anyone knows why I get this error?
**** QBOOT SELECTION STARTED: ****
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: opening device: \\.\COM9
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x63000FE
OUTPUT: ...chip-id = 0x705
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.002s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.001s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.002s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ -0.000s]
OUTPUT: greeting device for image downloading
OUTPUT:
OUTPUT: OKAY [ -0.000s]
OUTPUT: sending programmer
OUTPUT: Unexpected packet: 4. Was expecting: 3
OUTPUT: FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
OUTPUT:
hemikranion said:
anyone knows why I get this error?
**** QBOOT SELECTION STARTED: ****
**** BOOTLOADER FLASHING STARTED: ****
OUTPUT: opening device: \\.\COM9
OUTPUT: OKAY [ 0.001s]
OUTPUT: greeting device for command mode
OUTPUT: OKAY [ 0.001s]
OUTPUT: identifying device
OUTPUT: ...serial = 0x63000FE
OUTPUT: ...chip-id = 0x705
OUTPUT: ...chip-rev = 0x0
OUTPUT: ...sv-sbl = 0x0
OUTPUT: OKAY [ 0.002s]
OUTPUT: finding files
OUTPUT: ...programmer = programmer.mbn
OUTPUT: ...singleimage = singleimage.bin
OUTPUT: OKAY [ 0.001s]
OUTPUT: validating files
OUTPUT: OKAY [ 0.002s]
OUTPUT: switching to download mode
OUTPUT: OKAY [ -0.000s]
OUTPUT: greeting device for image downloading
OUTPUT:
OUTPUT: OKAY [ -0.000s]
OUTPUT: sending programmer
OUTPUT: Unexpected packet: 4. Was expecting: 3
OUTPUT: FAILED (blank-flash:sahara-transfer-image:send-image:unexpected packet)
OUTPUT:
Click to expand...
Click to collapse
Navigate in your bootloader to factory mode and then press the power button around 20-40 times before it boots up...Then unlock the bootloader and flash the Stock ROM for your model
the device does not start at all, there just led blinking on moto g4 plus
bsuthar said:
the device does not start at all, there just led blinking on moto g4 plus
Click to expand...
Click to collapse
Just flash your device with stock rom using sp flash tools .your device will start.
What he said ^^ Download the latest Stock ROM for your device, and issue the commands mentioned in @fratellos link one after another most likely you should get it back up.
skkethwas said:
Just flash your device with stock rom using sp flash tools .your device will start.
Click to expand...
Click to collapse
plss help me....
i have moto e4 and i don't know which file flashed first preloader.bin or pgpt.bin
first of all i flash preloader.bin and other factory images when i am going to flash pgpt.bin command ended up with error like this "PGPT: partition table not found" . after this wiped userdata and relock the bootloader. on fastboot reboot device cannot boot into system, no bootlogo, no fastboot, no recovery but recognized by PC and Miracle tool also charging led blink.
is this a softbrick or hardbrick.
Moto E4 won't power on. only white light led comes up when connecting with pc or charger. device recognized by pc.
kartik verma said:
plss help me....
i have moto e4 and i don't know which file flashed first preloader.bin or pgpt.bin
first of all i flash preloader.bin and other factory images when i am going to flash pgpt.bin command ended up with error like this "PGPT: partition table not found" . after this wiped userdata and relock the bootloader. on fastboot reboot device cannot boot into system, no bootlogo, no fastboot, no recovery but recognized by PC and Miracle tool also charging led blink.
is this a softbrick or hardbrick.
Moto E4 won't power on. only white light led comes up when connecting with pc or charger. device recognized by pc.
Click to expand...
Click to collapse
I think this can help you
https://forum.xda-developers.com/moto-e4/how-to/moto-e4-guide-stock-firmware-restore-t3661684
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
tejeshjadhav.tj said:
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
Click to expand...
Click to collapse
Yeah pls help me I am stuck at same problem...
Even I have a dead moto e
Pls give a solution
Same here
Devs pls give a legit solution
This happened to my phone while updating OTA
This happened 1 month ago......still no solution ?
Even mine's dead. Help needed.
tejeshjadhav.tj said:
my moto e has been dead.......
It doesnt power up at all.....when i press power + voldown together nothing happens and when i do it while plugged in the notification led blinks once......and when plugged into pc it shows "relink hs-usb qdloader 9008 (com3)"....the pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my twrp to 3.0.2 successfully. Then i wiped to factory and installed cm14.1 successfully...eventually when i tried installing open gaaps it failed showing not sufficient storage space......
Then i tried formatting internal sd and also wanted to format external sd but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this i tried formatting using "fastboot format external_sd" in fastboot....it gave me error 'unable to format raw partition"....then after googling i got to know that i had used external sd as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
I tried blankflash.bat but its giving error "
.c:\users\admin\desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\com3
okay [ -0.000s]
greeting device for command mode
okay [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
okay [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
okay [ 0.000s]
validating files
okay [ 0.000s]
switching to download mode
okay [ 0.016s]
greeting device for image downloading
okay [ 0.000s]
sending programmer
okay [ 0.016s]
flashing singleimage
failed (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
c:\users\admin\desktop\blankflash\blankflash>pause
press any key to continue . . "
then i read in one of the forum that blankflash is for moto g device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
i aslo found this guide : (unbrick qualcomm mobiles with step-by-step guide)... But in this guide the phone is showing : "qualcomm hs-usb qdloader 9008" and my device is showing : "relink hs-usb qdloader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
hope this is correct section to post this thread
Click to expand...
Click to collapse
my moto e is dead since the past 3 days. Was flashing it and made a mistake.
Same problem my younger brother ****ed up with his phone and I didn't got solution
Please
i have some problem sir (
tejeshjadhav.tj said:
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
Click to expand...
Click to collapse
slayer_cyrus said:
Yeah pls help me I am stuck at same problem...
Click to expand...
Click to collapse
Tapriwalaraju said:
Pls give a solution
Click to expand...
Click to collapse
Dobbypoly said:
Devs pls give a legit solution
Click to expand...
Click to collapse
Danymanidy said:
This happened 1 month ago......still no solution
Click to expand...
Click to collapse
JosephBlessingh said:
my moto e is dead since the past 3 days. Was flashing it and made a mistake.
Click to expand...
Click to collapse
The invincibles said:
Please
Click to expand...
Click to collapse
mazoerkam said:
i have some problem sir (
Click to expand...
Click to collapse
@mazoerkam @The invincibles @JosephBlessingh @Danymanidy @Dobbypoly @Tapriwalaraju @slayer_cyrus @tejeshjadhav.tj Have a look at my DevDB project - Unbrick hard bricked Motorola Moto E - Aravind V. Nair
tejeshjadhav.tj said:
My Moto E has been dead.......
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)"....The pc plays the connected sound periodically every 1 or 2 mins with notification light blinking,.
It happened when i wanted to update from cm13 to cm14.1...i updated my TWRP to 3.0.2 Successfully. Then I Wiped to Factory and installed cm14.1 Successfully...eventually When i tried installing Open Gaaps it failed showing not sufficient storage space......
Then I tried formatting internal SD and also wanted to format external SD but was unable. It gave me error that "ext-sd is in unknown file system" inorder to format this I tried formatting using "fastboot format external_sd" in fastboot....It gave me error 'unable to format raw partition"....then after googling I got to know that I had used External SD as internal in cm13 and so twrp was unable to format ext-sd....
Then i created partition using twrp in external sd..and then using advance wipe wiped data , internal storage, cache , dalvik cache, ext3-sd(or whatever it is), external storage....and it was successful.........and so i rebooted to recovery and after it is just dead........
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
C:\Users\Admin\Desktop\blankflash\blankflash>pause
Press any key to continue . . "
Then i read in one of the forum that blankflash is for moto G device..
I had a look at this but didnt got anything http://forum.xda-developers.com/moto-e/general/unbricking-hard-bricked-moto-e-t3306809
I aslo found this Guide : (Unbrick Qualcomm mobiles with Step-by-step guide)... but in this guide the phone is showing : "Qualcomm HS-USB QDLoader 9008" and my device is showing : "RELINK HS-USB QDLoader 9008" so what should i do???
Pls help me unbrick this device coz i dont have any money for service center (₹500 & ₹1000 denomination banned )
Hope this is correct section to post this thread
Click to expand...
Click to collapse
Does it get fixed tejasjadhav.tj[/MENTION]
moto e xt1022 hardrick
My Moto E xt1022 has been dead
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qbo ot.exe blank-flash
opening device: \\.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
plz help me sir
sagary727 said:
My Moto E xt1022 has been dead
It doesnt power up at all.....When i press POWER + VOLDOWN together nothing happens and When i do it while plugged in the notification led blinks once......and when plugged into pc it shows "RELINK HS-USB QDLoader 9008 (COM3)
i tried blankflash.bat but its giving error "
.C:\Users\Admin\Desktop\blankflash\blankflash>.\qbo ot.exe blank-flash
opening device: \.\COM3
OKAY [ -0.000s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3964945
...chip-id = 0x811
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.000s]
validating files
OKAY [ 0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.000s]
sending programmer
OKAY [ 0.016s]
flashing singleimage
FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)
plz help me sir
Click to expand...
Click to collapse
Follow this Tell me if this helps
https://forum.xda-developers.com/moto-e/general/unbrick-hard-bricked-moto-e-t2974093/amp/
mannu233 said:
Does it get fixed tejasjadhav.tj[/MENTION]
Click to expand...
Click to collapse
No It didnt got fixed by my efforts.
But got it repaired in Pune..
That guy Used JTAG to flash Firmware took like 5 mins n done... Costed Rs.500
still using that phone.