Hi guys. I need help. Ive been fighting with my player,linux and whole pc to get out of the Hard Brick. And i did it. So i installed linux, unbricked it, installed virtual box then win 7 and i flashed it with downloadmodeonly.tar ! Now all i just need is working firmware. Ive been trying a lot of firmwares but nothing. Always i flash my phone with odin and then again stuck at samsung screen ! Can someone help ?
Thanks !!
Dear ALL
I have bought an Omega OT107 tablet
It seems that there is not much information onthis tablet on the net.
The only thing i know about it, is that it has Rockchip chipset ,(rk29sdk)
I want to get the rom of the tablet onto my PC (ubuntu)
When i reboot th device into the recovery, it boots , but i see an android with a ! mark on it
Then i cannot do anything
I hope someone can help me
thanks a lot
sz_gergo
PS: ADMIN PLZ delete this message as i think it does not belong here
THX
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
I have the same issue I was trying to install new rom and unfortunately reformat the system drive...if you unroot your phone and ask your manufacturer to repair it or replace it you should have a good acting skills, don't tell them that you were trying to install new ROM because the warranty doesn't include system issues...
GL...
BTW: I wasn't able to find any fix for this issue...I just use my acting skills...LOL
Bricked S5
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?
christopher.silan said:
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?
Click to expand...
Click to collapse
yes there is always a solution, download stock ROM n flash it find the stock ROM in my signature
An image for flame 2
Hmm maybe if somebody can get us a flame2 image
IM Not sure but by going to QPST Download mode nd connecting it to windows and making a backup image through acronis somebody can help us
And we restore the image using the same method.
Request people to connect qpst mode to linux and give us the boot files as windows cant recognize the partitions.
Im also stuck in a similar problem
hope someone can help
You find solution..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
Sort of
kaushal9128 said:
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
Click to expand...
Click to collapse
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you
I will!!
I will make one soon As I get the Phone in hands.. I sure will... Just have patients !!
Please Do!
Please Do!!
I Have sent my mobile to the service center and it has been over three weeks and still no result.
I'll take it back and do it myself as soon as an image surfaces out.
And Thanks!!
That'll be of great Help
Karbonn s1 Titanium/Cherry Flame 2.0 Partition 3 Backup
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan
warmachine68 said:
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan
Click to expand...
Click to collapse
:crying::crying::crying:
Yeah Same Happened With Me No Flashing Lights While Trying To Charge..
0k gonna go round..
OK ok I saw this.I know how you feel.Once I soft bricked my Samsung Galaxy S2..That's so bad.Here's possible solution.Download original ROM from somewhere idk you find it.Download Odin.Try to insert new software with it.If it doesn't works I am so so sorry.
As I heard before the only solution for hard bricked devices is.
Go to very tall building,go to top and throw your phone from there and cry..
For Soft Bricked you can fix it easy.You need to install new ROM.
Soft Bricked or Bootlooped is when you hear only sounds.Your phone reacts on charging but you don't see anything and you can boot into recovery and turn on and off your device.
Hard Bricked Device- Well nothing works.Solution is to throw it into junk..
I'll look out somewhere if I can find any solution.
Solution
android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
Hey i think i found solution for this but i haven't tried it yet coz i don't have linux http://forum.xda-developers.com/showthread.php?t=2573743 if u find it useful or have any other solution please let me know. I am so upset since when my S1 is hard brickes that i am using nokia 1208 . please msg me if u find the solution
idragon81 said:
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you
Click to expand...
Click to collapse
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.
kalmukale said:
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.
Click to expand...
Click to collapse
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot
Help!
adubu said:
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot
Click to expand...
Click to collapse
Can anyone please help us.. on how to build the correct image back up for Cherry mobile flame 2.0, we need a complete package that can be flashed thru EMMC Download... or better yet sir can you make a back up using the emmc Download tool? thanks a bunch!
looking forward to resolve this issue.
Can anyone please... Post a Acronis backup file of Partition3sector for Karbonn titanium S1 please.......
I need a rom that works on tablet BLU Touch Book 7.0 Plus
Part: P100i
The manufacturer said it will not provide rom for users and I need to recover my tablet.
I can go into "System update" and "Fastboot" mode but without the rom I can not do anything else.
Or someone who has this tablet could take a dump or something I could recover on my tablet?
Please.....
try this:
chrome://mega/content/secure.html#F!GlQQ2IRY!dHpwQLJme7vHCKt5J3_cJQ
some ppl report display upside down
mr64fixit said:
try this:
chrome://mega/content/secure.html#F!GlQQ2IRY!dHpwQLJme7vHCKt5J3_cJQ
some ppl report display upside down
Click to expand...
Click to collapse
I need ROM or at least CWM recovery (image and scatter) for BLU P200L. Do you know where I can get it?
EDIT: I got it from another working P200L. I've been able to revive the bricked P200L with it.
CVAngelo said:
I need ROM or at least CWM recovery (image and scatter) for BLU P200L. Do you know where I can get it?
EDIT: I got it from another working P200L. I've been able to revive the bricked P200L with it.
Click to expand...
Click to collapse
Can you please share the P200L Rom?
Help
Hi all, guys i need this rom TouchBook 7.0 P200L Tablet BLU to be installed through the program SP-FlashTool because the tablet does not enter recovery mode, it sounds only when connected to the computer and reads the SP-FlashTool.
I really need your help guys . Thank you.
CVAngelo said:
I need ROM or at least CWM recovery (image and scatter) for BLU P200L. Do you know where I can get it?
EDIT: I got it from another working P200L. I've been able to revive the bricked P200L with it.
Click to expand...
Click to collapse
Can you please share that?
LEARNPAD TABLET HELP NEEDED PLEASE
LEARNPAD LPQ-497W
Has learnpad software on it & I would like to remove this & just use it as a standard android tablet.
Assume it is rooted to run the learnpad software.
Sadly I have not been able to enter recovery mode to reset it. Have tried everything I can think of.
Tablet has no volume up or down buttons
Have tried everything & am running out of ideas.
Somebody must have encountered this issue before.
Any ideas or help would be much appreciated
Kindest regards
Try this
menote4man said:
LEARNPAD TABLET HELP NEEDED PLEASE
LEARNPAD LPQ-497W
Has learnpad software on it & I would like to remove this & just use it as a standard android tablet.
Assume it is rooted to run the learnpad software.
Sadly I have not been able to enter recovery mode to reset it. Have tried everything I can think of.
Tablet has no volume up or down buttons
Have tried everything & am running out of ideas.
Somebody must have encountered this issue before.
Any ideas or help would be much appreciated
Kindest regards
Click to expand...
Click to collapse
Hi there,
I just finshed reading the info about the tablet since they are using their own version of android it maybe impossible to get the exact rom however you can unlock the tablet to access restricted features.
And no the tablet is not rooted.
try this website about unlocking the tablet : https://support.learnpad.com/portal/kb/articles/locking-and-unlocking-learnpad
try this website to root your tablet it may or may not work : www.kingoapp.com
Hi there. Thank you for replying.
I cannot unlock the tablet as per your link because to do this you need the original owners login details.
I am a second user.
Tablet seems to be really locked down. Cannot even access the recovery mode which is probably what I need to do.
Seems such a waste of good hardware to maybe have to bin this tablet just because basic android cannot be installed on it.
Really appreciate your help & advice. Many thanks.
Please help
i also have this learn pad . but my problem is the learnpad is stuck on start. this learnpad not have android os . its have Ubuntu OS and it work with 12V battery. my problem is to install a new and fresh Ubuntu OS , but how can i boot this device from usb. if someone know please help me. thanks in advance.
Same problem but with lpq-397. Bootloop.