VIBE X2-EU stuck without OS. - Android Q&A, Help & Troubleshooting

Hello, I bought this phone 3 months ago its a Lenovo VIBE X2-EU model on the latest firmware. Yesterday, I encountered an error where WiFi couldn't be enabled. Restarted phone, Factory resetted it. Still didn't work. Accidentally wiped the OS itself from its stock boot loader. Now I'm stuck, PC doesn't recognize the phone as an external device so i cannot flash a stock ROM on it. All I can do is charge the phone and enter factory reset menu/meta mode and a Chinese menu that has to do with system checks. Any ideas? Really tried to flash a ROM with drivers + SP Flash tool etc but to no avail.

Related

Phone stuck on boot screen. Usb debugging not on

I tried to change pixel density and after rebooting the phone got stuck in the bootscreen . I tried to restore factory settings . I wiped all user data and partition cache. Still it was stuck. The usb debugging was not enabled. I tried to flash recovery but the phone doesn't get detected(I had All the drivers). I downloaded stock rom and tried to install it using "update using sd card", it says "installation aborted". Can u guys tell the method to bring the phone back to it's original state. My phone is micromax canvas unite 2. O.s. Kitkat 4.4.2. IT is rooted but it has stock recovery.

How to repair my dead rooted android (Micromax D321) ?

Few days ago I rooted my android phone (Micromax D321) using Kingroot. It was going well but after few days my mobile stopped working. I removed battery to force switch off phone and booted it. It stucks on boot screen. I tried to flash stock rom using SP Flash tool but after flashing successful phone was in same condition. When I tried to update android Via adb it is showing "status :0, installation aborted" after certain progress. So I tried to factory reset mobile from recovery menu and then it is showing " error: cannot get the phone encrypt state". I am totally confused how to solve this issue.

XT1225 Boot Looping issues, Lost IMEI and No TWRP Recovery

Hello Everyone,
I own a Motorola quark XT1225 64GB indian version. I had earlier rooted it and installed Lineage OS 14.1 (Unofficial) in it. The installation was without any issues and worked for few months then one day i pressed the power button to turn on the phone and it went into a boot loop and nothing would work. i gave it to a repair shop and he installed android 6.0.1 in it and gave me back. But my phone wont connect to WIFI and later i found out that there was no IMEI or any network related information left in it. only the OS booted and nothing else was working. Even the Developer options were not available as for some reason tapping the build number was not giving any result. he refused to fix it. I tried a factory reset from the settings menu with no result. even the recovery was not available any more in the phone. I tried installing new android stock images both for android 5 and 6 first from RSD lite and fast boot mode which kept failing and then i tried it using the command promt. After installation was complete the phone rebooted and android appeared with erasing written under it but then it went into boot loop and would keep restarting every time android appeared. I tried installing TWRP recovery from the command promt the initial image of the recovery appears but then next second it says unable to mount data and keeps rebooting again and again. Kindly suggest ways to fix my OS as well as have my IMEI restored.
Really need help.
Thanks a lot.

[Please help] MICROMAX Q372 PHONE DEAD

I was facing an issue with the phone being stuck in logo screen.I tried to wipe the user data and was unable to do so via recovery.So I flashed the phone with stock rom using Sp Flash tool.Still it once again remained stuck in logo screen.So I tried to format the phone and after that the phone is dead , It does not charge nor power up.I once again tried with format all and download and sp flash tool flashed it successfully and showed the okay screen.The flashing process is happening but the phone does not boot on pressing the power button.It is like totaly dead.Except the only thing that recognizes my phone is the flash tool.Even my laptop which runs on Ubuntu 16.04 does not show any kind of indication on connecting.Please give me a solution.I am very panicked.
How I encountered this problem:
1.Since I was stuck at the boot loop.I tried to wipe data entirely through recovery.There was mount error due to encryption.So my only chance was at flashing the phone.
2.I had 3 version of stock Rom for 3 different build(I didn't know my build no).I tried flashing them all but all the 3 flashed successfully but the result was
same.Stuck at bootloop.I found out this might be because I was unable to wipe the data from phone.
3.So I wiped the entire data using sp flash tool using the format flash except boot loader option.
4.After that I had 3 versions of stock Rom with me for different build no.And I think I flashed the one with
the build no which was not meant for my phone.
5.The flashing was successfull.But the phone was dead.
6.Then once again I reflashed other version during which once the flashing was interrupted.
7.Finally I flashed the correct Stock rom version for my build no.Because It was in the end I found out my build no.
8.The flashing was successfull except the phone is still dead.
Observations:
A.Memory Test:
1.ERROR:NAND FLASH NOT DETECTED.(This was present even before the phone became dead .ie when it was stuck at the boot loop after flashing the firmwares).
2.ERROR:UFS not detected.(This was present even before the phone became dead .ie when it was stuck at the boot loop).
Rest went well.The memory test in the end showed the okay message.
B.Format option:
Now the format option does not work.
When I try to format the phone once again using sp flashtool format whole flash except bootloader.It says ERROR : S_DL_READ_PT_FAIL (5073).
what went well?
I am able to download the preloader first and then seperately download rest of the components.
This I am able to do with and without the battery.
what didnt go well?
1.The phone is still dead.No reaction from the phone on pressing any button.
2.Phone LED does not blink or light up on connecting with or without battery to the wall charger or laptop.
3.The screen is black.
I have a question.
should I try the format whole flash option and not format whole flash except boot loader?
I did not try this since latest version doesnt have this.And there are many people who have encountered problems too with that option.
PLEASE HELP ME.THANK YOU.
pjseven said:
I was facing an issue with the phone being stuck in logo screen.I tried to wipe the user data and was unable to do so via recovery.So I flashed the phone with stock rom using Sp Flash tool.Still it once again remained stuck in logo screen.So I tried to format the phone and after that the phone is dead , It does not charge nor power up.I once again tried with format all and download and sp flash tool flashed it successfully and showed the okay screen.The flashing process is happening but the phone does not boot on pressing the power button.It is like totaly dead.Except the only thing that recognizes my phone is the flash tool.Even my laptop which runs on Ubuntu 16.04 does not show any kind of indication on connecting.Please give me a solution.I am very panicked.
How I encountered this problem:
1.Since I was stuck at the boot loop.I tried to wipe data entirely through recovery.There was mount error due to encryption.So my only chance was at flashing the phone.
2.I had 3 version of stock Rom for 3 different build(I didn't know my build no).I tried flashing them all but all the 3 flashed successfully but the result was
same.Stuck at bootloop.I found out this might be because I was unable to wipe the data from phone.
3.So I wiped the entire data using sp flash tool using the format flash except boot loader option.
4.After that I had 3 versions of stock Rom with me for different build no.And I think I flashed the one with
the build no which was not meant for my phone.
5.The flashing was successfull.But the phone was dead.
6.Then once again I reflashed other version during which once the flashing was interrupted.
7.Finally I flashed the correct Stock rom version for my build no.Because It was in the end I found out my build no.
8.The flashing was successfull except the phone is still dead.
Observations:
A.Memory Test:
1.ERROR:NAND FLASH NOT DETECTED.(This was present even before the phone became dead .ie when it was stuck at the boot loop after flashing the firmwares).
2.ERROR:UFS not detected.(This was present even before the phone became dead .ie when it was stuck at the boot loop).
Rest went well.The memory test in the end showed the okay message.
B.Format option:
Now the format option does not work.
When I try to format the phone once again using sp flashtool format whole flash except bootloader.It says ERROR : S_DL_READ_PT_FAIL (5073).
what went well?
I am able to download the preloader first and then seperately download rest of the components.
This I am able to do with and without the battery.
what didnt go well?
1.The phone is still dead.No reaction from the phone on pressing any button.
2.Phone LED does not blink or light up on connecting with or without battery to the wall charger or laptop.
3.The screen is black.
I have a question.
should I try the format whole flash option and not format whole flash except boot loader?
I did not try this since latest version doesnt have this.And there are many people who have encountered problems too with that option.
PLEASE HELP ME.THANK YOU.
Click to expand...
Click to collapse
Same problem here did you found any solution to this ?

[Help] Blackview BV5800 PRO SP Flash Tool "STATUS_DA_HASH_MISMATCH"

Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
snowlite said:
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
Click to expand...
Click to collapse
hey..
did u solve ur pb..? i have another phone wihch called blackview A60 pro i m getting same error.. it was working fine then suddenly dead..and no flashing or etc..

Categories

Resources