I was facing an issue with the phone being stuck in logo screen.I tried to wipe the user data and was unable to do so via recovery.So I flashed the phone with stock rom using Sp Flash tool.Still it once again remained stuck in logo screen.So I tried to format the phone and after that the phone is dead , It does not charge nor power up.I once again tried with format all and download and sp flash tool flashed it successfully and showed the okay screen.The flashing process is happening but the phone does not boot on pressing the power button.It is like totaly dead.Except the only thing that recognizes my phone is the flash tool.Even my laptop which runs on Ubuntu 16.04 does not show any kind of indication on connecting.Please give me a solution.I am very panicked.
How I encountered this problem:
1.Since I was stuck at the boot loop.I tried to wipe data entirely through recovery.There was mount error due to encryption.So my only chance was at flashing the phone.
2.I had 3 version of stock Rom for 3 different build(I didn't know my build no).I tried flashing them all but all the 3 flashed successfully but the result was
same.Stuck at bootloop.I found out this might be because I was unable to wipe the data from phone.
3.So I wiped the entire data using sp flash tool using the format flash except boot loader option.
4.After that I had 3 versions of stock Rom with me for different build no.And I think I flashed the one with
the build no which was not meant for my phone.
5.The flashing was successfull.But the phone was dead.
6.Then once again I reflashed other version during which once the flashing was interrupted.
7.Finally I flashed the correct Stock rom version for my build no.Because It was in the end I found out my build no.
8.The flashing was successfull except the phone is still dead.
Observations:
A.Memory Test:
1.ERROR:NAND FLASH NOT DETECTED.(This was present even before the phone became dead .ie when it was stuck at the boot loop after flashing the firmwares).
2.ERROR:UFS not detected.(This was present even before the phone became dead .ie when it was stuck at the boot loop).
Rest went well.The memory test in the end showed the okay message.
B.Format option:
Now the format option does not work.
When I try to format the phone once again using sp flashtool format whole flash except bootloader.It says ERROR : S_DL_READ_PT_FAIL (5073).
what went well?
I am able to download the preloader first and then seperately download rest of the components.
This I am able to do with and without the battery.
what didnt go well?
1.The phone is still dead.No reaction from the phone on pressing any button.
2.Phone LED does not blink or light up on connecting with or without battery to the wall charger or laptop.
3.The screen is black.
I have a question.
should I try the format whole flash option and not format whole flash except boot loader?
I did not try this since latest version doesnt have this.And there are many people who have encountered problems too with that option.
PLEASE HELP ME.THANK YOU.
pjseven said:
I was facing an issue with the phone being stuck in logo screen.I tried to wipe the user data and was unable to do so via recovery.So I flashed the phone with stock rom using Sp Flash tool.Still it once again remained stuck in logo screen.So I tried to format the phone and after that the phone is dead , It does not charge nor power up.I once again tried with format all and download and sp flash tool flashed it successfully and showed the okay screen.The flashing process is happening but the phone does not boot on pressing the power button.It is like totaly dead.Except the only thing that recognizes my phone is the flash tool.Even my laptop which runs on Ubuntu 16.04 does not show any kind of indication on connecting.Please give me a solution.I am very panicked.
How I encountered this problem:
1.Since I was stuck at the boot loop.I tried to wipe data entirely through recovery.There was mount error due to encryption.So my only chance was at flashing the phone.
2.I had 3 version of stock Rom for 3 different build(I didn't know my build no).I tried flashing them all but all the 3 flashed successfully but the result was
same.Stuck at bootloop.I found out this might be because I was unable to wipe the data from phone.
3.So I wiped the entire data using sp flash tool using the format flash except boot loader option.
4.After that I had 3 versions of stock Rom with me for different build no.And I think I flashed the one with
the build no which was not meant for my phone.
5.The flashing was successfull.But the phone was dead.
6.Then once again I reflashed other version during which once the flashing was interrupted.
7.Finally I flashed the correct Stock rom version for my build no.Because It was in the end I found out my build no.
8.The flashing was successfull except the phone is still dead.
Observations:
A.Memory Test:
1.ERROR:NAND FLASH NOT DETECTED.(This was present even before the phone became dead .ie when it was stuck at the boot loop after flashing the firmwares).
2.ERROR:UFS not detected.(This was present even before the phone became dead .ie when it was stuck at the boot loop).
Rest went well.The memory test in the end showed the okay message.
B.Format option:
Now the format option does not work.
When I try to format the phone once again using sp flashtool format whole flash except bootloader.It says ERROR : S_DL_READ_PT_FAIL (5073).
what went well?
I am able to download the preloader first and then seperately download rest of the components.
This I am able to do with and without the battery.
what didnt go well?
1.The phone is still dead.No reaction from the phone on pressing any button.
2.Phone LED does not blink or light up on connecting with or without battery to the wall charger or laptop.
3.The screen is black.
I have a question.
should I try the format whole flash option and not format whole flash except boot loader?
I did not try this since latest version doesnt have this.And there are many people who have encountered problems too with that option.
PLEASE HELP ME.THANK YOU.
Click to expand...
Click to collapse
Same problem here did you found any solution to this ?
Related
Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
Hi,
A friend has a brand new Redmi Note 2 and after few hours the phone been bricked, so I flash by following this tuto > en.miui. dot .com/thread-187696-1-1.html
It works !
2 weeks later the phone bootloop again, so we followed this tuto again but didn't worked. It was pretty hard to access the Flashboot menu, seems the vol buttons were not working. Sometimes we reached the boot menu, but the phone was freezing on the menu and booted again.
Finally I reached the flashboot, I wiped it successfully !
But nope, the phone is still bootlooping.
Any ideas ? Of course today he tried to go to the shop, but the "professional" said him he never heard about this brand and this problem, so he can't fix it...
Cheers
Use Flash Tool and flash Recovery again
I've flash again and still bootlooping ..
I can't access the storage part on the phone.
Is it possible to put a rom custom ?
The phone try to load something but still loading ...
Have you try a full wipe that means that all data is deleted ? What Firmware have you installed ? What Recovery is on your phone ?
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
crandroid99 said:
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
Click to expand...
Click to collapse
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
Click to expand...
Click to collapse
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
xaocot said:
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
Click to expand...
Click to collapse
This update was seven months ago. It did not claim to bring 6.0, just minor fixes.
Thank you for clearing that up, now I just have to figure out how to download and use it xD.
Also I have figured out how to enable the hidden administrator account in Win10 and use that to get around the security warning, still tries to boot partway through flashing. Unless there's some other part of Win10 that's disagreeing with it.
Sent from my ONE A2005 using Tapatalk
the same problem with me!
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
plz someone too guide me ,the same problem is happening but there is no appearance of a loading screen,when i switch on the tab ,it showws the lenova logo and goes to a black screen thats keeps on flahsing!! i dont knwo what to do ,when i connect to pc and try to flash it doesnt work,i dont what to do plz help me!!
Click to expand...
Click to collapse
Here's a timeline:
-Got the phone, worked fine
-Unlocked bootloader, rooted & installed TWRP
-Installed unofficial Android 7 as described here
-After a couple of days I got tired of the bugs and decided to revert to Android 6.
-Installed unbloated rom, can't remember which one
-Phone worked fine.
-After a day or so of use, I rebooted the phone, and it would not go past Sony logo (black text on white background)
Here's what I have tried, in a somewhat chronological order:
-Holding combinations of up/down/power
-wiped dalvik/cache
-reinstalled same unbloated rom
-reinstalled stock rom through Flashtool (tried android 5.0 and 6.0 roms, neither worked)
-Completely wiped OS and reinstalled stock rom- up to this point I could still boot into TWRP
-Relocked bootloader and tried repairing through PC companion (said it was successful, but the phone is still stuck on Sony logo).
This is where I am at now. Any help would be appreciated, if I can provide additional data I will.
Thanks in advance
Edit: I don't know if it is relevant, but the phone always gets really hot- at least 70 degrees, sometimes up to 90 according to TWRP.
If it's stuck on the boot logo it's alive. Can you enter recovery, wipe every single partition and then flash ftf with wiping everything including cust-reset
DavidMKD said:
If it's stuck on the boot logo it's alive. Can you enter recovery, wipe every single partition and then flash ftf with wiping everything including cust-reset
Click to expand...
Click to collapse
The thing is, I can't get into recovery through holding the vol up and power buttons. When I do, the phone just vibrates once and reboots (or if I hold it longer, it vibrates 3 times and switches off).
Should I wipe everything through TWRP? Is there a way to wipe through adb?
DavidMKD said:
If it's stuck on the boot logo it's alive. Can you enter recovery, wipe every single partition and then flash ftf with wiping everything including cust-reset
Click to expand...
Click to collapse
Hi DavidMKD,
I'd like to answer as well because I'm stucking at the same point but with an E2333.
I've wiped every single partition by TWRP and then flashed with an official ROM downloaded from xperifirm.
No changes at all.
I'm wondering it is hard issue, maybe changing the battery ?
It is true as well that the side under the back camera it's very hot when the phone start.
I didn't find any advices works. The only way to talk correctly with the phone is to flash it or root it, then any OS are unusable, in my case 5 mn max.
If I can help to have another try in your experience...
Thx in advance
Hi guys,
I think I've found a turnover to arrange everything, described in a thread :
https://forum.xda-developers.com/m4-aqua/help/xperia-m4-e2333-startup-logo-bootloop-t3696032
Hope it helps
Flaximuss
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
snowlite said:
Hello! I posted on the official forum for Blackview but so far I haven't gotten a response. TL;DR, my phone, a Blackview BV5800 PRO, could not boot up (stuck on logo) and using recovery mode doesn't work. I get mounting issues when I try to factory reset, wiping the partition cache, and even mounting it (an option).
So my last resort was to attempt to re-flash the ROM using the provided ROM file by the OEM, which they did have on their forum. The first time around when I downloaded the ROM plus the SP Flash Tool, followed the instructions and all, it appears to be flashing just fine. As soon as it finished with the checkmark on screen, the phone is stuck in a black screen and Windows keeps detecting the device over and over, but nothing happens on the phone. From my research online, this is a feature of all MediaTek devices in an attempt to restore a factory ROM.
Now, when I try to flash again with the SP Flash Tool with the same ROM, I am getting a "STATUS_DA_HASH_MISMATCH" error. Or sometimes i get the "STATUS_BROM_CMD_SEND_DA_FAIL error. At this point, I tried every possible option within the tool itself as well as trying all combinations on the phone Power + Vol down/up/both then plugging it to my PC, nothing. It keeps showing the same error.
Frustrated with this, did I screw up something? Did the preloader corrupt during the first run? I don't know what to do at this point.
Click to expand...
Click to collapse
hey..
did u solve ur pb..? i have another phone wihch called blackview A60 pro i m getting same error.. it was working fine then suddenly dead..and no flashing or etc..