Hi friends, I have currently the great Arter's Back to Noot v9 rom installed (with arter kernel 4.1) and I like to try LUKEROM 4.4.4, is it possible for me to install it securely?
Thanks in advance for your response...
1.Before flashing any rom at first flash stock rom. Because clean install is best.
2.Install any recovery cwm or philz
3.goto recovery Wipe data,Cache, Dalvik cache
4.install Luke Rom
5.Reboot system...
I still have a rooted galaxy s3 i9300 with philz recovery installed, and back to noot rom v9 installed...do I have to go back to 4.3 Samsung stock rom before flashing lukerom 4.4.4 or is it possible to do it from back to noot rom (with a clean install from philz recovery)?
lbls55 said:
I still have a rooted galaxy s3 i9300 with philz recovery installed, and back to noot rom v9 installed...do I have to go back to 4.3 Samsung stock rom before flashing lukerom 4.4.4 or is it possible to do it from back to noot rom (with a clean install from philz recovery)?
Click to expand...
Click to collapse
possible. Goto philz recovery.
Mounts & Storage- Format/system,cache,data,
Wipe cache,dalvik cache, clean to install a new rom
install luke rom
reboot system
Sureshtuty said:
possible. Goto philz recovery.
Mounts & Storage- Format/system,cache,data,
Wipe cache,dalvik cache, clean to install a new rom
install luke rom
reboot system
Click to expand...
Click to collapse
Thanks for your help, my friend...I'll try it ....
Related
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Wipe phone
Boot to recovery go to mounts and storage format cache data and system also format sd card but this will wipe sd card .
Phone will no longer boot remove battery then replace and boot to download mode .
Via Odin flash stock rom .
jje
What kernel are you using? Go into Download mode as jje said and flash a stock firmware, then flash CF root then flash away with custom roms.
nikzDHD said:
What kernel are you using? Go into Download mode as jje said and flash a stock firmware, then flash CF root then flash away with custom roms.
Click to expand...
Click to collapse
i am using cf root kernel , and i will try to do as jje said
http://forum.xda-developers.com/showthread.php?t=1291282
xperia ray said:
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Click to expand...
Click to collapse
Flash a stock kernel+rom with odin , flash a cf-root then use clockwordmod recovery ( enter CWM manager in apps drawer and boot to CWM )
-wipe data
-wipe cache
-install zip from internal sdcard
-DO NOT REBOOT ( at least if you want CyanogenMod )
-install zip from internal sdcard (again , due to a bug)
-reboot
report back here when you try it
gr4ndm4st3r_bl4ck said:
Flash a stock kernel+rom with odin , flash a cf-root then use clockwordmod recovery ( enter CWM manager in apps drawer and boot to CWM )
-wipe data
-wipe cache
-install zip from internal sdcard
-DO NOT REBOOT ( at least if you want CyanogenMod )
-install zip from internal sdcard (again , due to a bug)
-reboot
report back here when you try it
Click to expand...
Click to collapse
not working , i already tried this method with MIUI
Which of the many versions of the SGS2 do you have?
xperia ray said:
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Click to expand...
Click to collapse
This is for the international I9100:
Data/factory reset,wipe cache, wipe dalvik cache, format system, data and cache in mounts and storage. flash cm7 twice in a row without rebooting and flash google apps.Reboot and done
Enable usb-debugging first before flashing and backup you current rom and apps.
Maybe you have a I9100G, all the roms don't work.
prodygee said:
Maybe you have a I9100G, all the roms don't work.
Click to expand...
Click to collapse
i have galaxy s2 gt i9100, unlocked international version
My SamSung S2 up rom Stock 4.1.2 via odin or cook rom base 4.1.2 via CMW is bootlooped logo S2 I wipped all before and after uprom. And i up 2.3.6 or 4.0.3 or stock rom > 4.2 is not bootloop. i want up Wanna lite 4.1.2 rom, how to fix bootloop? Thanks you very much, sorry for my bad english.
P/S: When i change Mobile Networks to GSM only is Not Service, i can call when change Mobile Networks to 3G with poor network.i tried modems.
Flash Philz kernel first. Reboot in Recovery and flash Wanam Lite.
PS: what is 'up'?
Donnie Sins said:
Flash Philz kernel first. Reboot in Recovery and flash Wanam Lite.
PS: what is 'up'?
Click to expand...
Click to collapse
Yes, it is still boot loop, i flash form Wannalite 4.0.3 via Philz to Wannalite base 4.1.2, Stock rom 4.1.2 also bootloop.
You can try to do a full wipe, install Wanam (not Wanna) Lite.
Then reboot into Recovery, flash Philz kernel and reboot system.
Did you try to flash another custom rom by the way?
Donnie Sins said:
You can try to do a full wipe, install Wanam (not Wanna) Lite.
Then reboot into Recovery, flash Philz kernel and reboot system.
Did you try to flash another custom rom by the way?
Click to expand...
Click to collapse
Yes, i flashed stock 4.0.3, many Custom rom 4.2 or 4.3 it ok. but when i flash custom rom base 4.1.2 is bootloop even stock 4.1.2 still boot loop.
I Flash stock 4.0.3 -> Flashed Kernel Philz -> Do Wipe -> FLash Custom rom base 4.1.2 -> Do Wipe -> Bootloop
Tinhte1989 said:
I Flash stock 4.0.3 -> Flashed Kernel Philz -> Do Wipe -> FLash Custom rom base 4.1.2 -> Do Wipe -> Bootloop
Click to expand...
Click to collapse
After flashing a rom, you shouldn't do another wipe. In that case you erase the rom you've just flashed, and there is nothing to boot up.
Donnie Sins said:
After flashing a rom, you shouldn't do another wipe. In that case you erase the rom you've just flashed, and there is nothing to boot up.
Click to expand...
Click to collapse
It still bootloop. i did not wipe after flashed
blueforever89 said:
It still bootloop. i did not wipe after flashed
Click to expand...
Click to collapse
Last thing that comes up in my mind is: flash the rom. After it, reboot into Recovery, DON'T wipe and reflash the rom, reboot.
Not really sure if this is making any difference, but maybe it is
Edit: I just saw you're a different person.. What's up with that?
Donnie Sins said:
Last thing that comes up in my mind is: flash the rom. After it, reboot into Recovery, DON'T wipe and reflash the rom, reboot.
Not really sure if this is making any difference, but maybe it is
Edit: I just saw you're a different person.. What's up with that?
Click to expand...
Click to collapse
i tried, not solve !
1 account log from gmail, 1 account xda :fingers-crossed:
blueforever89 said:
i tried, not solve !
1 account log from gmail, 1 account xda :fingers-crossed:
Click to expand...
Click to collapse
Sorry, I've no idea... Good luck anyway:thumbup:
Donnie Sins said:
Sorry, I've no idea... Good luck anyway:thumbup:
Click to expand...
Click to collapse
i don't know why i can't Flash rom base 4.1.2 JB!
Thanks for your help!
Any idea? Please Help me,
Redownload everything again... then check md5 sum if its correct..if its a mismatch it will be a bootloop
Then flash latest philz in download mode
Go to cwm
Wipe data
Wipe dalvik
Wipe cache
Flash neat rom (juzt a suggestion to use a rom wid preload content)
Reboot...
doctor_droid said:
Redownload everything again... then check md5 sum if its correct..if its a mismatch it will be a bootloop
Then flash latest philz in download mode
Go to cwm
Wipe data
Wipe dalvik
Wipe cache
Flash neat rom (juzt a suggestion to use a rom wid preload content)
Reboot...
Click to expand...
Click to collapse
I flashed I9100XWLSW_NeatROM_Lite_v4.8.zip rom with Same MD5 Sum. But not getting out Bootloop Android Neatrom, i tried many stock 4.1.2, or cook like wamma lite, Neat base 4.1.2. all is getting bootloop. Other rom not Base 4.1.2 is ok. I can't understand.
Have Any Idead?
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
Install via CWM. Instructions can be found in CWM and ur ROM thread.
Sent from my frozen Penguin's Nexus 7 with frozen CM 10.2 using frozen Tapatalk 4.FORGOTTEN Pro
Flash a custom rom with cwm..
wipe your data/system first.
wipe catche
install from sd card (Flashable file must be store in root of your sdcard.)
wipe catche
wipe dalvik catche
Imp:
Make your currunt working rom backup before anything you do with your phone. it will save you.
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1552792
go to this post and flash the stock firmware via odin.
for installing custom rom, you will need root and cwm
go to recovery mode
choose install zip from sd card
choose the cwm file
this will install the cwm.
now wipe data and cache
go to advanced menu and wipe dalvik cache
then go to choose zip from sdcaed and select the rom
please make sure that you are using a proper custom rom file meant for your phone.
hit thanks if it helped
Good morning, I am so sorry to disturb the lovely and professional XDA community, but I can't solve this problem.
Sorry in advance for my bad english and for my very low competence in android and flashing roms.
I have an i9100 and I am trying to install deodexed I9100XWLSW rom from your thread
"[ROM][JB.4.1.2][18/10][XW-MS1/LSZ/LSW- Added] Deodexed Stock Samsung Roms" to gain battery life.
No matter if I start in recovery from totally stock XWLSW with stock recovery (boot in recovery then use philz-touch_3.00_i9100-signed.zip and install I9100XWLSW .zip rom package) or from any other Rom (CyanogenMod 10.1.3 or BeanStalk or anything else with their specific recoveries) I finish after install in a boot loop of stock 3e recovery. I have tried also with philz_touch_6.12.8-i9100.tar.md5 flashed with odin but no solution to get aut of boot loop and acces deodexed I9100XWLSW rom. Only way to get phone back is then to flash stock with odin o use again philz-touch_3.00_i9100-signed.zip to restore nandroid backups of other roms.
I have searched everywhere in you forum and in google for a solution and only thing I have found is a user in the "[ROM][JB.4.1.2][18/10][XW-MS1/LSZ/LSW- Added] Deodexed Stock Samsung Roms" thread at page 33 that says he has solved using philz recovery but I have tried and it appears to not work for me. What recovery did he exactly use? I can't post to that thread because I am a new user on xda.
Any suggestions? What am I doing wrong? Hope I have explained my situation,
Many regards
Flash the latest philz kernel in stock recovery. Then reboot into recovery and flash deodexed rom.
Thank you but I still can't get it to work
Zile995 said:
Flash the latest philz kernel in stock recovery. Then reboot into recovery and flash deodexed rom.
Click to expand...
Click to collapse
Thank you so much for the answer, but I must be doing something wrong. I downloaded from xda thread "
[PhilZ-cwm6][i9100/P] Stock Kernel+CWM6+Root+exFAT+NTFS-MS3" at link goo.im/devs/philz_touch/CWM_Advanced_Edition/i9100 the philz_touch_6.43.4-i9100.zip and put it on sd. Then with phone still in boot recovery loop I tried from 3e recovery to install philz_touch_6.43.4-i9100.zip and it fails saying ""this papackage is for 'galaxys2,i9100,GT-i9100,GT-i9100M,GT-i9100P,Gt-i9100T,SG-02C' devices; this is a ' ' . E: error in /tmp/sideload/package.zip (Status 7)".
I then downloaded from web also philz_touch_6.43.4-i9100.zip.md5
If I go in download mode and try with odin 3.09 to flash philz_touch_6.43.4-i9100.zip.md5. It says "md5 error! Binary is invalid". I tested however md5sum of philz_touch_6.43.4-i9100.zip.md5 and it corresponds to the one indicated on website of download.
I then downloaded from the same site philz_touch_6.43.4-i9100.tar.md5 and odin says this time "failed" "complete write operation failed".
Ok. So I flashed back with odin original stock I9100XWLSW_I9100ITVLS2_ITV and tried again the sequence. First attempt philz_touch_6.43.4-i9100.zip failed so I stopped trying.
What is wrong? Should I use "signed" versions? I don't understand however what philz to download with stock rom I9100XWLSW_I9100ITVLS2_ITV
UPDATE
Got perhaps the correct Philz for latest ITA stock rom I9100XWLSW_I9100ITVLS2_ITV : PhilZ-cwm6-XWLSW-XEU-5.08.5-signed.zip
Installed it through stock recovery. Installed from new recovery after reboot and complete wipe the deoxeded rom I9100XWLSW. Again boot recovery 3e loop. Installed again PhilZ-cwm6-XWLSW-XEU-5.08.5-signed.zip via stock.
Now getting philz recovery loop. I am a bit low in solutions.....
Download latest kernel not recovery.
Flash this http://d-h.st/mEg in stock recovery.
Try this deodexed stock rom https://docs.google.com/file/d/0Bx7rnV0ak_XLWjBHS3UzaU8wWmc/edit?usp=sharing
Zile995 said:
Download latest kernel not recovery.
Flash this //d-h.st/mEg in stock recovery.
Try this deodexed stock rom docs.google.com/file/d/0Bx7rnV0ak_XLWjBHS3UzaU8wWmc/edit?usp=sharing
Click to expand...
Click to collapse
Thank you.... but PhilZ-cwm6-XWMS3-FOP-5.15.9-signed.zip is for stock ita rom I9100XWLSW_I9100ITVLS2_ITV?
And the same question is for I9100XWMS1_I9100XXMS4_I9100NEELS1_HOME_Deodexed_Sofos.zip?
These are the two files you suggested to download
P.S. To forum ADMINS.... As a new user I can't post links, but when I answer to somebody nice and helpful like "Zile995" that has posted some links, I have to get rid of url references etc from the
otherwise I can't reply.... I think that is something near to a bug.
Click to expand...
Click to collapse
Flash philz xwms3 signed in stock recovery. Then hold 3 buttons to enter in recovery.
Then do this.
-wipe data factory reset.
-wipe cache partition
-advanced -> wipe dalvik cache
-mount and storage ->:
-format system
-format preload
-install zip from sd card
-find your Deodexed Sofos zip.
-after that reboot system now.
Edit: You can try also xwlsw...
Zile995 said:
Flash philz xwms3 signed in stock recovery. Then hold 3 buttons to enter in recovery.
Then do this.
-wipe data factory reset.
-wipe cache partition
-advanced -> wipe dalvik cache
-mount and storage ->:
-format system
-format preload
-install zip from sd card
-find your Deodexed Sofos zip.
-after that reboot system now.
Edit: You can try and Ita xwmlw...
Click to expand...
Click to collapse
Thank you. I am downloading files (horrible slow connection.... and will try immediately.
linux_hedgehog said:
Thank you. I am downloading files (horrible slow connection.... and will try immediately.
Click to expand...
Click to collapse
Download only Philz and try with XWLSW.... If it doesnt work then try XWMS1
Zile995 said:
Download only Philz and try with XWLSW.... If it doesnt work then try XWMS1
Click to expand...
Click to collapse
Sorry.... but what do you mean by "try with XWLSW.... If it doesnt work then try XWMS1"?
For XWLSW and XWMS1 you mean deoxeded versions? From usual xda thread.
Zile995 said:
Flash philz xwms3 signed in stock recovery. Then hold 3 buttons to enter in recovery.
Then do this.
-wipe data factory reset.
-wipe cache partition
-advanced -> wipe dalvik cache
-mount and storage ->:
-format system
-format preload
-install zip from sd card
-find your Deodexed Sofos zip.
-after that reboot system now.
Edit: You can try also xwlsw...
Click to expand...
Click to collapse
Ok. Got it. Installed PhilZ-cwm6-XWMS3-FOP-5.15.9-signed.zip etc and did what you said. Tried xwlsw but went in usual stock recovery boot loop. Then I tried XWMS1 and it went ok. Finally phone boots ok. Thank you so much!!!!!!!!!!!!!!!!!!!!!! :good::good::good::laugh::highfive:
Very last question: What Philz recovery can I use for XWMS1??
You can flash latest philz xwms3 kernel if you want to change ROM.
Also you can flash latest philz recovery. I don't know... Why recovery?
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
blahsum said:
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
Click to expand...
Click to collapse
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Sureshtuty said:
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Click to expand...
Click to collapse
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
blahsum said:
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
Click to expand...
Click to collapse
I mean before flashing any custom rom flash stock rom then flash that rom which u want.
1.download stock firmware flash it with odin
2.then flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Excellent, thank you!
A few tips to anyone looking this up:
First, I used Heimdall - but apparently Odin is quite similar.
I had to unpack the stock rom and then individually flash the factoryfs and zimage files.
I then unpacked the Phils mod and flashed the zimage again.
That was all in download mode
After that I flashed CM12 in recovery mode.