Don't know if anyone has ever had this problem?
Removed the battery from the phone and then replaced it after removing the sim card now the phone won't power up or be recognised by a pc on the cable.
The battery is in the correct way and the battery is fully charged as I have the extra battery pack.
Related
i think i put hardly charger,s pin in hd2.and after time i seen phone is losing battery but led status is charging.i also tried shutdown and charging and replaced battery but battery is not charged.now im using a desktop charger.if i i use hd2 charger then it shows charging.but battery is not charging.i want know that it means a device is busted or charging pins are damaged b.c every thing is working even usb is working but usb charging also dont charge battery.
Does anyone know of a way to run the phone without having the battery and mainly using the charging port?
I'm currently using CM7.03
I don't want my battery to overheat while I have it on tethering. The battery temp according to hidden mode went up to 48.0C, battery status "Overheat" =[
It may not be possible with our phone.
I tried it on mine, using a car rapid charger and the standard wall charger, and neither worked, so I don't think that's the problem.
Follow these steps then you can use moble without battery:
1. Start your phone (boot up)
2. Plug charger
3. Remove battery
=> Your phone is working normally.
(may be you have to remove the case before plug charger)
Try it
Hi,
I have a question on how the X10 (or any other smartphone) detects if the battery is depleted.
Is this a software or hardware issue?
I have an X10 and it won't charge the battery via the USB cable.
I charged it with an external charger and I verified the voltage under load. The battery is indeed charged. But when I turn on the phone it will get to main screen (Android) and I see the battery icon as completely empty (sometimes full though) and then the pone restarts.
So it looks like when it gets to the main operating system something tells him to turn off because the battery is empty.
Any ideas?
What is the middle pin (between the + and - pin) for?
Thanks
Hello everyone!
My Atrix4G seems to be in some kind of bootloop, and I have no idea what's causing it. I'm suspecting it is my battery, because when android boots up it says my battery is charged. But then I pulled the battery, and turned on my phone with the charger plugged in, without the battery. Then it tells me I have no battery inserted, so I insert my battery, and it says it's on 5%. I left my phone like that, to charge it. It went up to 70% then stopped. Turned on my phone, android boots up, says my battery is charged, then reboots again. I pull the battery, turn on my phone with charger plugged in, without battery, and when it asked for battery I insert it and says 5% again. I tried the Battery Calibration app, but didnt make any difference. Any ideas?!
i have a phone that wouldn't charge the battery. i pulled the battery and charged it up and put back in phone. the screen still shows i need to charge the battery. i pulled the battery again and the charging port looked to be in bad shape, so i put a new one in. battery still showing needs to be charged. bought another battery, same issue. how do i troubleshoot it from here? or does someone know what it is?