Related
Hi guys, really need your help!!!
Been using Custom ROMs since Omnia HD. Loved the work of cookers, never had problems, ODIN is just so easy.
Four days ago, tried to flash I9100 from Lite'ning v5 to 6.1. So, as recommended I wiped cach with CWM, and then done proper FORMAT.
Once I pressed it, format started but didn't finish - the phone restarted, and continued to restart - stuck with boot "S" animation - so can't boot into system.
Then, tried as suggested to install VANILA latest firmware - tried it - didn't work. Keeps freezing in the middle of the process in ODIN - or - it says FAILED. Now, i can't use CWM - if I press Volume UP +HOME+POWER, i get "Mobile phone with yellow Triangle with PC signs" - left to the right.
Updating to the VANILA software doesn't work, so as Lite'ning V6, or any other versions of it. Without CWM, i can't boot from SD Card to other cooked roms, so please, any ideas will be MUCH APPRECIATED !!!
morespama2k .at. yahoo
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
emergency firmware recovery with kies - will try now, and update status...
Solution doesn't work
SugarySnack said:
I have never tried this before myself, but I have seen some people recommend trying an emergency firmware recovery with kies. If someone else can chime in and correct me if I am wrong, please do so.
Click to expand...
Click to collapse
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
morespama5k said:
This solution doesn't work. Because, all that I can do is to log into DOWNLOAD MODE, once I connect the phone via USB to PC with Kies ON, then the Kies doesn't recognise the phone in this mode, so there is opportunity or possibility to do an emergency firmware recovery - if anybody knows anything abt this - please comment ....
Click to expand...
Click to collapse
Put the phone in recovery mode with Volume UP +HOME+POWER (it won't be CWM because you tried to flash stock, it is samsung's recovery mode), "Mobile phone with yellow Triangle with PC signs" and try it.
Let me know how it goes.
just checking... when you flashed through odin, was kies turned off? Meaning not even in the background and it's (process) not present in task manager?
Because that's what happend to me when i tried to flash a kernel to my SGS2. odin failed too but good thing my phone wasn't bricked.
Anyways, I would recheck the custom rom you downloaded, it sounds like the file was incomplete, or damaged during download. Always check the MD5 checksum, or at least the filesize.
Some custom ROMs cannot rebuild a formatted userdata partition. Most custom kernels cannot do that, so doing a factory reset (wipe userdata partition, format data partition, etc) is not recommended.
FIX:
Boot into Clockwork Recovery
Format cache, format system, format boot, format userdata partitions
Boot into Download Mode
Use ODIN to flash to Stock ROM
Boot into Stock ROM
Flash Custom ROM (Lite'ning), DO NOT FORMAT USERDATA and DO NOT FACTORY RESET!!
Boot into Lite'ning
CM7 using codeworkx kernel (CM7 kernel), is the only custom rom that does not have a rebuild userdata partition problem.
for my i9100 i solved this problem
i have the same issue and i solved with my i9100:
unmount battery and leave it for 20 sec
push up vol and home and keep it then put the battery !!!!! put vol up and home still pushed
if ....if you entry in recovery mode wipe data and cache and .... voila...
sorry for my bad english...hope this will work for you guys !!!
Jig from ebaaaaay .
Sent from my GT-I9100 using xda premium
I Have a I9100 ,It Has android cod ,I tried by hard reset ,hard reset complate but cod stil present.then i flash it by odin3 ,flash complate then start up and friz.then i open its Batery and put it again then try to flash again .but its sleeping now. dont going to download mod.not powering on .have any solution guys ?????????
hi i tried to flash a kernel on my friends phone and now its bricked i can get into download mode. before u say its not bricked, i can get into download mode but it no longer registers on my computer. i have all the drivers downloaded, i downloaded kies also. when i try to boot normally i get a message saying firmware encountered an issue. i have tried moving computers and new cables. so how might i get this phone back in working order plz and thank u
slayerofpeace1 said:
hi i tried to flash a kernel on my friends phone and now its bricked i can get into download mode. before u say its not bricked, i can get into download mode but it no longer registers on my computer. i have all the drivers downloaded, i downloaded kies also. when i try to boot normally i get a message saying firmware encountered an issue. i have tried moving computers and new cables. so how might i get this phone back in working order plz and thank u
Click to expand...
Click to collapse
Does it boot into recovery mode?
Press Volume UP + Home + Power keys until recovery menu appears.
If yes, then try to wipe cache (and Dalvik cache), fix permissions and reboot.
If that does not help, you may have to wipe data (do a factory reset).
If recovery mode does not work, then your phone seems to be semi-/soft- bricked.
You will have to get the phone connected to your PC in download mode to repair it.
Here is the correspsonding thread about hw to fix a soft-bricked phone => http://forum.xda-developers.com/showthread.php?t=1457458
Good luck !
i have gotten it into download mode but my computer does not see the device
Install samsung kies?
have that installed, reinstalled, and i installed all the drivers. it was working but after the odin flash failed i couldnt get it to connect. right now im building a jib for the phone.
so built jig, now im sad..... it did nothing, now either i have to send it in or some one might know a way to fix it
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
I can wipe cache and partition but nothing change, it keeps rebooting.
I cant use odin because odin didn't see the phone,
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
I am looking for possibilities and solution for 2 days and I cant find any. Please help me.
bootloop
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
anshulmalviya said:
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
Click to expand...
Click to collapse
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
atilim said:
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
You are right, it was computer malfunction. I can use odin now.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
Click to expand...
Click to collapse
I both try 4.1.2 (with odin) and 4.3 (with octopus) but it keeps rebooting.
I also use octopus box to flash and repair efs.
atilim said:
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
Click to expand...
Click to collapse
If you've cleared the partition structure then you've turned a possible soft brick into a hard brick, you'll need a new motherboard now.
Try flashing the rescue firmware, from the thread in general, but I wouldn't hold out any hope.
Sent from my GT-I9300 using Tapatalk
same problem but worse please help
HI guys i have exactly the same problem but my bootloop was caused by installing recovery through the cwm app and then rebooting to recovery through the app. i rebooted to recovery with an app before and it caused this aswell ...however back then my volume down button was working. i fixed it last time by going into download mode and flashing philz recovery however i cant enter download mode or recovery or boot into system.
PS: my phone doesnt boot into recovery it comes up with the samsung galaxy s3 gt 19300 logo then it comes up with the cwm recovery icon in the middle of my screen and 'clockwordmod recovery v6.0.6.4' at the bottom of the screen then restarts itself.
i dont know what to try i have looked around, didnt want to create a new thread just wanted to find out if anyone has any idea of what i can do except for buying a new volume down button thats my last resort apprently its £35 to fix
easy way to fill up you thanks meter guys as any sort of input and advice is extremely appreciated.
alphadavid99 you fried your lcd when you flashed cwm made for note in the other thread.
Hi i have the issue... I am able to get in Recovery and Download Mode.
While in recovery i had formatted the whole internal memory and tried flashing about three AOSP ROMs (Formatting each time before Flashing) but the only result was the endless boot up screen (not boot loop).
Then i tried flashing a sammy ROM and it worked...
Could someone tell me why am I able to flash Sammy ROM but not AOSP (such as ARCHIDROID & SLIMBEAN).
My Model is GT-i9300
Current Modem - XXUGMK6
Current ROM - S4 Revolution ROM (TM)
Thanks in advance for your time if someone has any suggestions
Please can you assist me.
I've read through so many threads explaining that it is easy to fix if I use ODIN. However I cannot seem to get ODIN to recognize my Galaxy S3.
I was doing a factory reset on my device, which has Cyanogenmod installed. Upon rebooting, the phone is now stuck with the Teamwin logo and it continues to loop.
In cannot seem to charge the phone because it's stuck in this mode and when I install ODIN and along with the SAMSUNG USB Drivers. I have no luck with my computer recognizing the device. I am able to get into the Download mode by holding Power, Volume Down and Home buttons - I click Volume up to continue. I then check my ODIN screen and it never appears to say ADDED or anything of that sort.
I'm scared that my phone is going to soon run out of charge and then I will not be able to even attempt to fix this. Please help me.
I've tried the above steps in both Windows 8.1 and Windows 7 and cannot get either of them to recognize my device.
N.B. I have also tried different USB ports as well as different USB cables.
Once again, I plead for any assistance.
Can u go to the custom recovery ??
If so
Do a clean wipe
Do a factory reset (do not do a clean to install new rom,just erase your data)
Wipe your cache
Wipe dalvik cache and see if u can boot it up
Goodluck
Use the latest odin version and see
And why didint you take a nandroid backup before installing custom roms
If u took it
Just restore it
U will surely boot it up
Hi there,
Thanks for your reply.
I managed to solve the issue by using a computer which already had my device USB drivers installed.
The other 2 computers I tried didn't seem to want to recognize the device due to the bootloop - but when linking up to a computer which linked to my phone prior to the ordeal, ODIN then recognized the device and I was able to load stock rom back on.
FYI, I wasn't able to access recovery.
Thank you for your quick response.
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls