My Problem is, when i start the camera ive get a black screen.
If i make a hard reset, and after i make all settings, the camera ist working fine!
After some minutes, i dont know why, the phone is making an automatical restart. Then the camera dosnt work anymore. If i use apps like instagram or else, the camera works.
I have the problem with the firmware 32.0.A.4.11 and now with 32.0.A.5.32
It sucks.
Can someone help me? Any solutions?
Don't hesitate, return for new device that's clearly not normal if you're running stock firmware and locked boot loader.
I have exact same thing!
Related
Please help me fix the camera of my Cingular 8125 G4 device. After I flashed a new rom using soft SPL method, which I think G4 safe rom, the camera is not working. When I press the camera button, I only see the spinning circle with different colors and the screen lights up a little bit than the normal brightness and stuck it there. And after a few seconds, the phone hangs up. Need to soft reset in order to put back the device in a functional state. I don't know why this happened as I followed all the necessary steps in using softSPL upgrade method. Maybe there is something wrong in the device registry. Does anyone has the same camera problem. Please share the tricks, tweaks or anything just to bring back the camera function again.
BTW, I reflashed back the official cingular stock rom but no luck at all its the same.
I see that you are using the TNT ROM, so I would to and flash UP to the newest version and see if that fixes your problem, it sounds like the camera software and drivers are not getting installed for some reason.
I reflashed the tnt rom but no good. Tried also to go back to the original cingular stock rom but still not working. Even in the windows\camera cannot make it. But when tried not to use the device for a some hour in standby mode, the camera works for a while then it hangs up. And go back to non-functional state.
Sir, what you think is the problem? I suspect its the software installed in the device based on what the camera behave. Or definitely the hardware itself and need to replace. Bad for me because I am living in the Philippines and as far I knew there is no service available in our country.
Thanks in advance whatever help you can give. Have a nice day.
Try using the wizard service tool to increase your page pool to 6mb.
Camera work again after....
My dead camera work again after I flashed rom cooked by Cracing. This rom is awesome. Its compatible with Wizard. Thanks to Cracing.
Hi everybody:
I installed the udk syrius 7 rom Polaris, when activate my camera
it doesn`t show imagen, it`s black andy show the news
text:
Unable to capture photo. Unable to get frame data from
camera device.
Can you help me??
Thanks a lot ¡¡¡¡
Same here!
Same here!
I tried several roms and I still have the same issue.
Tried downgrading the radio, didn´t work either...
Could it be the SPL?
I have had the same problem. I have resolved with a new one flash of ROM
SPL is OK !
Just go back to a original rom (incl radio) and after that try again.
If that doesn't work just try a other radio rom.
Most of the roms have different radio requirements
Some need 1.58****
Other need 1.59****
Normaly the rom maker gives that info.
Sometimes the camera malfunctioning is a software issue.
As i experienced it is a hardware issue when you still have the troubles when you go back to original rom and radio rom. Although there are tons of users which get the camera to work after installing some package etc, my defect was loose connections on PCB/CPU or something similar. Thats why the problem starts slow, sometimes it works, somethings it doesn't and in the end it doesn't work at all.
The only thing you can do then... is return it for warranty.
Hi everyone,
Yesterday I was installed 2.1 on my Xperia. After that, my camera stopped working. Everytime,when I try to launch it, i see only "Camera unaviablle". I was trying everything. First, I reflash phone to 1.6, and guess what - the same problem! After that, I was trying "Repair" in PCC and SEUS. Four times. Nothing... Anyone have any ideas whats going wrong? Problem was started after update, but I don't belive, that the update is reason. Please, help me. I have great phone, with great 8mpx camera, but I can't use it... I'm desperate.
probably a hardware problem mate ~ i think you should go to your dealer ~ wer you brought your mobile ~ hope it still on warranty ~ or you would have to pay extra costs !!
I think the same. But I still hope, that anybody have same problem, and it isn't hardware. But if it is hardware - then I'm going to disassembly my phone and take a look what is wrong. Maybe it is only problem with connector or something like this. I think, I haven't warranty after what I was doing with my kit...
in my x10 i cant do video recording only photo shoot
did u by any chane get this problem after installing adw launcher?
Yeah I'm having the same problem which I talked about here http://forum.xda-developers.com/showthread.php?t=826174
Lets see if we can find some commonalities:
Which phone do you have: X10a or X10i?
Which firmware revision? Nordic? Generic? etc
How did you flash it? Did the flash program say press enter to continue?
When the phone first started up, did you see a Camera --> Phone icon?
Anything else significant that you can think of?
1. I have X10i
2.Now, I have Global FW, but I have Nordic 2.1 when problem was apeared
3. I used Flashtool to flash to nordic, then I used SEUS to update to 2.1
4. YES! I saw this icon! And I knew that this is a sign!
Also, when I flash to Generic 1.6 my phone was bricked. Only vibrate.
I was thinking, that this is hardware problem. But now, thanks you, I think, that is software hopefully. It is impossible, that two person have the same hardware problem in the same circumstances
Do you have any ideas what goes wrong?
Camera worked the first time since 2.1, then I get the camera not available message. didn't try to go back to 1.6... Hope the camera didn't break..
Camera not available
Hey iv got the same problem, when I start the camera it says "Camera Not Available" iv tried everything iv re-flashed the phone used SEUS and reinstalled the FW however still the same problem. Done factory reset. cleared cache
Iv even downgraded back to 1.6 and the camera still doesn't work
it still says "Camera Not Available"
Can some1 please help?
Is anybody here, who might help us? Or tell us what is wrong, ane where we must search reason of this problem?
Hi,
Adding my woes listed in post 8993145
1. I have X10i
2. I currently have Nordic 2.1 loaded, but I originally had global 2.1 loaded and have reloaded that 3 times before I tried Nordic.
3. The firmware files I have are ok as I have flashed 5 other phones for work colleagues with no problem.
4. I used Flashtool to flash to global and I have also used SEUS to reload 2.1
I can successfully root the phone, and everything else appears to be working apart from the camera.
My problem is solved, I emptied the picture/video folder using a file manager (in the DCIM folder of the SD card). Camera is working again
I tried and nothing. So, my problem this isn't reason for my kit. Anyone else tried this method? Or anyone solved this problem? Or anyone want help us? Maybe devs? Even for money...
FRiKiNFRoG said:
My problem is solved, I emptied the picture/video folder using a file manager (in the DCIM folder of the SD card). Camera is working again
Click to expand...
Click to collapse
Worked here!! Camera is back again!
Update: It crashed again but i've tryied to remove Vignette (demo) of the device and it worked!
I have removed the photos held under the DCIM directory, but the camera is still not working for me.
I think we need bin4ry or someone who knows a bit about the flash process. I feel that the issue has something to do with something that stays between flashes. Otherwise, flashing back to old firmware would fix the issue.
Have you tried backing up your sd card then formatting it and replacing the files? (and empty dcim)
Sent from my X10i using XDA App
Tried. Not working. It's truth, we need bin4ry...
I have the same problem with my X10a, I flashed it with 2.1 nordic using bin4rys flashtool. I formated my SD and nothing.
Ah so the problem resurfaces
Back when i had 1.6 on my x10i ... the camera apk would crash when i clicked on the camera button.... [my work around is to use the "on screen" click option]
i tried to run camera on android (it just got clicked) and first everything was black(with camera options), then it went green(with camera options), so i thought that its just that android build doesnt support camera right now.
but today i tried to open camera on bada, but it showed "camera failed".
i tried many a times, but everytime its the same! rebooted and then tried camera on bada, but it still is not working!
can anyone help me out?
anyone else faced the problem or its just me???
(i did try to search the problem in forum..but showed no result)
Hi Max
You have XXJK1 am i wrong?
Do you remember flashing *.pfs file while upgrading from XXJID ???
If you think you didn't flash that file then flash it alone and let me know if your Camera is fixed or not
Best Regards
yes you are right, i m on XXJK1..!
umm..but i dont remember if i flashed the .pfs file or not, but in either case i can flash the .pfs file again right?
i'll give it a try n come back
thanks
haha..now camera works like a charm (but not the android one yet..lol )
thanks a lot
now i m sure i didnt flash it last time! my bad!
Hey Guys,
I use a stable 10.1.3 CM since a year on my S2. Lately the camera started to quit qorking: "can't connect to camera".
About this time the torch (LED app) app did the same thing: "unfortunately torch has stopped".
What I did: do a full data/cache/dalvik cache erase: factory reset.
The camera/torch still malfunctioning.
Then flashed the last nightly CM: cm11-20140429, but still no luck.
Then reflashed the old stable version, maybe if it'll work, but noooo.
Do you have any suggestion to resolve this issue? My phone is 2 years old, never had a problem with it. Until now.
Shall I flash something via Odin?
Is there a "deeper" way to rewrite the camera/LED firmware/code/whatever?
(I was wondering if flashing these 2 CM versions the appropiate firmware's aren't rewritten)
Thanks in advance for the replies!
you can try more ROMs. However, there is a possibility that its a hardware issue.
The camera stopped working on my galaxy S1 after a factory reset.
I never did get it working again, and I tried about 4 different camera firmwares, flashing back to stock, and replaced the camera module too. Nothing worked.
knuckles1978 said:
The camera stopped working on my galaxy S1 after a factory reset.
I never did get it working again, and I tried about 4 different camera firmwares, flashing back to stock, and replaced the camera module too. Nothing worked.
Click to expand...
Click to collapse
Sorry to hear that.
I'm wondering now to replace the camera module as well.
I quickly tried this 3 ROM: aosb_kk_1.3.6_i9100, omni-4.4.4-20140728-i9100-NIGHTLY, Slim-i9100-4.4.2.build.5-OFFICIAL-4068, but with the same disappointig result: no camera, no LED.
If I first start LED/torch isntead of camera, the LED sometimes flashes:
I switch on, but nothing happens. Then switch it off: after a few sec delay the button will show the "off" state, and during this process the LED flashes for 1 sec.
I will try to revert to stock with odin, maybe...
The camera module is very easy to change. All you have to do is unplug it and plug a new one in.
You might be luckier than me.
knuckles1978 said:
The camera module is very easy to change. All you have to do is unplug it and plug a new one in.
You might be luckier than me.
Click to expand...
Click to collapse
Yes, but what if the same thing will appear? Ie. I'll change the camera module, but won't work.
Isn't there an easier way to check if surely the camera moduled is dead?
Btw I downgraded it to stock ROM via Odin, but camera still dead, so it is probably not a software error. :crying:
There's no way of telling if your camera module is broken without putting a new one in.
It didn't fix it for me though. And believe me when I say I spent a lot of time trying to figure it out.
Ok then.
Thank you very much for the support!