Hello all, hope I can get some help here. I was trying to boot my phone in recovery mode to clear the cache but the phone cannot be on at all. There is no response now when I try to on it normally. I've tried charging it but the phone does not respond at all. When I connect it to my pc, it detects it as a USB drive but says it has malfunctioned and cannot recognize it.
I'm not sure what happened exactly. Need some help~
Related
Hi My DNA has stuck and screen is "OFF" responding, this happened while i was trying to flash recovery.
Device was working perfectly and i probably did something wrong.
I tried all tricks & tips i am familiar with, no luck , the device does not get into "bootloader" or any other mode.
The device is charged so its not a battery issue.
when i connect it to the PC via the USB i hear 2 beeps instead of 1 beep as i used too.
Also when i tried all kinds of games with the power button + volume down at the same time, this does not help at all.
When i connect the device to the PC and open terminal , i use adb device , i get nothing nothing.
Need a smart advice from someone who can help.
Thanks,
Goren
itzik-g said:
Hi My DNA has stuck and screen is "OFF" responding, this happened while i was trying to flash recovery.
Device was working perfectly and i probably did something wrong.
I tried all tricks & tips i am familiar with, no luck , the device does not get into "bootloader" or any other mode.
The device is charged so its not a battery issue.
when i connect it to the PC via the USB i hear 2 beeps instead of 1 beep as i used too.
Also when i tried all kinds of games with the power button + volume down at the same time, this does not help at all.
When i connect the device to the PC and open terminal , i use adb device , i get nothing nothing.
Need a smart advice from someone who can help.
Thanks,
Goren
Click to expand...
Click to collapse
You can try going here and asking for advice: http://chat.andirc.net:8080/?channels=#droid-dna
If you are using windows what does it call the phone under device manager when you plug it in to the computer?
Hi all,
I am in desperate need of ya'llz help! Recently I followed the following instructions to the dot:
http://forum.xda-developers.com/showthread.php?t=2703774
in order to get root on 10.4.1.B.0.109. I ended up, like the author of the thread, in the so called bootloop. Tried everything and eventually managed to get out and restored to root 4.1.2. Thats where I am now.
The tablet works fine, however i am unable to connect to my pc with USB and also unable to charge via the charger. The tab is not detected in my computer, nor PC companion. Mass storage mode nor media mode work. I tried swapping cables, same.
The only thing I am able to get working through USB is charging when the tab is powered off, which means that the USB port is not broken.
I was thinking that updating would fix the problem, so I tried updating directly from the System update in the tab. It downloads 109, then restarts to install it, comes back with: "Could not install"!
Now my tab is not detected on my PC when its on, what to do ? How to update/Fix the USB problem!?
Any help is greatly appreciated!
Update
Ok I realized that the plugged cable only makes the red LED on the left light up, and when i click the power button, I see the battery picture in the display. Showing half charged. But the actual charge is not increasing.
Unplugging the USB, turns off the LED!
Help!
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
put your sd card in an adapter, put that in your pc and copy a zip with a full rom on it, put it back in your tablet and install the rom? Or try a different usb cable, maybe it's broken
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
hold power + Vol+ to reset device and after that try to connect to pc to flash in flashtool.
Thanx
Hi guys,
thanks for the replies. Ive tried those already. Ive tried all different types of roms. The problem is that you need a restore image such as dual recovery on the tablet. Its rooted but there is not way to install a recovery image on it, without using a computer. And since it wont connect to the PC, no way..
:/
Hey I hope you guys are able to help me, so onto my problem : it happened all a few months ago while flashing (can't remember exactly what) that my device won't boot it vibrates and then gets stuck at the M logo. I already went into boot loader and wiped cache etc: nothing. I have a locked bootloader status 0 and adb & fastboot installed on my PC, I charged my phone to 100% tried connecting it via USB but in the bootloader it doesn't change into transfer mode. It doesn't get recognised by the PC at all (im gonna try another cable in a bit) although it does charge through the USB port, as for the drivers I have the official Motorola drivers installed but to no avail.
Could it be that USB debugging is off due to me wiping everything and thus I can't connect via adb? How would I go about flashing in this case. Any help is highly appreciated you guys are my last hope
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!
hi. so my problem is that my phone does not turn on, i cant go to recovery or do hard reset. the phone react when i plug it in PC without battery, but its always connect and disconnect over and over again. i have downloaded the omap drivers and instaled it. now i have in the device manager a OMAP4430 FastBoot USB device. by the drivers was a fastboot emulator. but when i will flash rom, kernel or recovery a just get partition does not exist. can someone help me please? srry for english.
Does your phone not turn on at all when holding down the power button? If it boots up, and gets stuck on a loop or has an error message, that is different. But if it doesn't turn on at all, then your battery is dead or something is wrong with your phone's hardware. If you connect your phone to the PC (with the battery on), does it at least show a light? Or does it boot up at all when you hold the power button? If it doesn't show a light or boot up, it is not your battery, but your phone's hardware. Your phone might have been dropped or water inside it or it was microwaved? I know it sounds silly, but something happened to the phone physically. Now if you connect it to the PC and you see a light but it never boots, your device is bricked. Not accusing you, but you might have tried rooting it or writing over a partition on your phone which caused to brick. Also, try typing in fastboot devices. If it shows up a device, that means it is connected. Cheers!
No the phone does not turn on and it shows nothing, even when i put it on charger. If i connect to pc with battery after i installed the omap driver it just connect and disconnect over and over again, windows make this sound when you connect and disconnect something. I have flashed a new rom. It has worked but after some time its stoped. So i have try flashed it again but i could not get in recovery. A files was missing and after i try flashing thhe recovery its just dead. I can connect it just with the fastboot emulator because it's don't connect when i just put it on pc. I must connect it without battery wait 4 sec and then put the battery back. Than i can see in the emu my phone but not able flash anything because of partition does not exist