Hey I hope you guys are able to help me, so onto my problem : it happened all a few months ago while flashing (can't remember exactly what) that my device won't boot it vibrates and then gets stuck at the M logo. I already went into boot loader and wiped cache etc: nothing. I have a locked bootloader status 0 and adb & fastboot installed on my PC, I charged my phone to 100% tried connecting it via USB but in the bootloader it doesn't change into transfer mode. It doesn't get recognised by the PC at all (im gonna try another cable in a bit) although it does charge through the USB port, as for the drivers I have the official Motorola drivers installed but to no avail.
Could it be that USB debugging is off due to me wiping everything and thus I can't connect via adb? How would I go about flashing in this case. Any help is highly appreciated you guys are my last hope
Related
I am trying to relock my phone and install the newest RUU to get the firmware updates and I have hit a wall.
When I plug in my phone everything is peachy when its booted up and running. When I reboot into fastboot and plug in the phone it is not being recognized by my computer. I have made sure that while booted debugging is on, charge only, and everything is just as it was when I rooted(besides a different ROM). The phone isn't showing up anywhere, not in device manager and not in the devices/printers area. It will however still power the phone as it will stay on even if I pull the battery. I am running Windows 7 64. Any help would be greatly appreciated.
Also I have tried uninstalling and installing the phone drivers in device manager and restarting everything over and over, nothing is working.
Frosstyx said:
I am trying to relock my phone and install the newest RUU to get the firmware updates and I have hit a wall.
When I plug in my phone everything is peachy when its booted up and running. When I reboot into fastboot and plug in the phone it is not being recognized by my computer. I have made sure that while booted debugging is on, charge only, and everything is just as it was when I rooted(besides a different ROM). The phone isn't showing up anywhere, not in device manager and not in the devices/printers area. It will however still power the phone as it will stay on even if I pull the battery. I am running Windows 7 64. Any help would be greatly appreciated.
Also I have tried uninstalling and installing the phone drivers in device manager and restarting everything over and over, nothing is working.
Click to expand...
Click to collapse
the problem might be from usb cable.
try another one if you have.
Got it, I believe it was a driver issue, but I went through several things so not sure what finally worked...
my phone will not be recognized by the computer no matter what i do. It recognizes my friends i777 just fine in odin and as a storage device so it isnt my drivers. With mine it only makes the connection sound and says device drivers failed to install. I am running shostock 3, philz kernel and windows 7. I have tried everything and i am out of ideas, please help. thanks
Install Kies fresh, install android sdk and update it, reboot, try different usb ports.
Also u have to disable usb debugging and let it install those drivers, enable it and let it install those drivers and boot into download mode and do a regular reboot and let it install those. Always worked for me after following those steps.
If he's friends phones works. Then I think it's the phone usb. My own phone has the same issues but my usb on phone is messed up. Says charging while its not chargin and that happens I get the whole Device not recognize and fail to install. Try cleaning your usb with 99% Isopropyl of the instructions above this post don't work out.
chibixzero said:
If he's friends phones works. Then I think it's the phone usb. My own phone has the same issues but my usb on phone is messed up. Says charging while its not chargin and that happens I get the whole Device not recognize and fail to install. Try cleaning your usb with 99% Isopropyl of the instructions above this post don't work out.
Click to expand...
Click to collapse
I will try this. I appreciate the help
I tried the suggestions.....
I downloaded the samsung drivers correctly because my pc recognizes any other samsung but no matter what i've tried it says usb device not recognized for my galaxy. Im stuck in a boot loop and the only thing i can access is download mode when i plug it in the computer. I can't access anything with the battery in, it just flashes the galaxy logo over and over. Thank you for you time in advance
I have a problem with my xt615,
it started out with the bootloop problem.
after that i managed to get into flash mode (redscreen) installed the pc drivers
and tried to flash 2-3 different stock roms, and a recovery via RSD LITE version 6.
at the beginning the phone was recognized as a zeus flash device, but i changed that driver to a motorola usb device.
somehow i manage to get the phone connected in the FLASH MSM7227 but still no program can recognize it so i can flash...
since i tried to flash the recovery i cannot enter the Flash mode (red screen) and earlier, when i was trying to turn on the devices from 50power attempts 2 times it was the moto bootloop logo...
now i cannot do that...
any suggestions how to get this device flashed!?or get it into flash mode?!
all the time its blackscreen and as i enter the usb it connects to the pc depends on which mode...when i hold the powerbutton and connect it it will connect as flash device msm7227 but still...i cannot do anything via RSD LITE , also tried via adb to get it recognized. but no luck...
Help desperatly needed
Hi, guys!
I'm trying to save my GT-N8000 for a while and nothing! I have USB Debugging disabled, my Recovery get stuck on TeamWin screen, and I'm able to use Download Mode, but my device is not recognized by ADB neither Fastboot.
I've tried a lot of solution the last months, but nothing worked until now. My last shot was to fill Odin3 3.10 with firmware files for PIT, BL, AP, CP and CSC. It finished the process successfully, but it didn't changed anything at all, my GT-N8000 still stuck on boot and I can't get into Recovery and the device is not recognized by ADB neiter Fastboot.
I have all drivers installed on Windows and it recognize my device each time I connect and shows that all drivers are successfully installed.
Any ideas, guys? I'm really exhausted and frustrated! Thank you all in advance!
GT-N8000 Not started, Not detected by PC... even Battery is removed.
I have a worst problem, it began after i upgraded to kitkat, but works for few months, and USB is not debugging enabled, by mistake...
until i forgets it on the power fro four hours, then i discovered that it is rebooted and rebooted and rebooted and stuck on the samsung icon, i took it for samsung to fix it they told it is motherboard, and has a price more than the device itself, so i took it from them, and tried to start it, it is failed to start after... i removed the cover and removed the battery for a minute, useless, i couldn't turn it again, i did all the things on the internet, useless.
The PC is not detecting the device.
The device is not starting on.
the battery is removed many times, and plugged again.
Even i tried to charge the battery using its poles by a direct charger on it, while it is un-plugged from the motherboard.
The device can't be start or give any power on the screen...
Kindly help... Thanks in advance.
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse