Related
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
I have the same issue I was trying to install new rom and unfortunately reformat the system drive...if you unroot your phone and ask your manufacturer to repair it or replace it you should have a good acting skills, don't tell them that you were trying to install new ROM because the warranty doesn't include system issues...
GL...
BTW: I wasn't able to find any fix for this issue...I just use my acting skills...LOL
Bricked S5
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?
christopher.silan said:
That happened to my Karbonn TitanS5 or cherry mobile Skyfire 2.0 aswell .. anyone have a walkaround for this?
Click to expand...
Click to collapse
yes there is always a solution, download stock ROM n flash it find the stock ROM in my signature
An image for flame 2
Hmm maybe if somebody can get us a flame2 image
IM Not sure but by going to QPST Download mode nd connecting it to windows and making a backup image through acronis somebody can help us
And we restore the image using the same method.
Request people to connect qpst mode to linux and give us the boot files as windows cant recognize the partitions.
Im also stuck in a similar problem
hope someone can help
You find solution..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
Sort of
kaushal9128 said:
YOU Found SOLUTION..???
YOU Found SOLUTION..???
YOU Found SOLUTION..???
Click to expand...
Click to collapse
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you
I will!!
I will make one soon As I get the Phone in hands.. I sure will... Just have patients !!
Please Do!
Please Do!!
I Have sent my mobile to the service center and it has been over three weeks and still no result.
I'll take it back and do it myself as soon as an image surfaces out.
And Thanks!!
That'll be of great Help
Karbonn s1 Titanium/Cherry Flame 2.0 Partition 3 Backup
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan
warmachine68 said:
Did anybody got the solution for fixing a hard brick Karbonn S1 titanium???? By mistake i formatted my boot from clockworkmod... n from that tym its showing Reset for entry qpst download... idk how to fix it... Please sum1 help me out... now its completely dead... so charging... nothing.... Please help me..
Thanks In Advance
Rohan
Click to expand...
Click to collapse
:crying::crying::crying:
Yeah Same Happened With Me No Flashing Lights While Trying To Charge..
0k gonna go round..
OK ok I saw this.I know how you feel.Once I soft bricked my Samsung Galaxy S2..That's so bad.Here's possible solution.Download original ROM from somewhere idk you find it.Download Odin.Try to insert new software with it.If it doesn't works I am so so sorry.
As I heard before the only solution for hard bricked devices is.
Go to very tall building,go to top and throw your phone from there and cry..
For Soft Bricked you can fix it easy.You need to install new ROM.
Soft Bricked or Bootlooped is when you hear only sounds.Your phone reacts on charging but you don't see anything and you can boot into recovery and turn on and off your device.
Hard Bricked Device- Well nothing works.Solution is to throw it into junk..
I'll look out somewhere if I can find any solution.
Solution
android4279 said:
Hi ghuyz.. newbie hir, trying to find all ways to revive by Smartphone... here's what happened:
first, i accidentaly formatted the sys boot of my device, resulting to a "reset for entry qpst" error because according to some geeks out there, formatting sysboot actually formats the partition 3 instead of partition 8.. as a resolve for this, i followed certain instructions on how to fix this kind of problem.. unfortunately, i cant find any complete procedures for karbonn s1, so i gambled to follow instructions for karbonn a9+ .. Now my phone is totally dead! It won't power on anymore. It wont even show "charging" when pluged in. I'm just a poor little guy who can't afford buying a new one anymore. For those geeks who have a benevolent heart out there, Please Help! I hate goint to service centers promising me to wait 4 at least 3 months before they can repair it.
Thanks and Godbless..
Click to expand...
Click to collapse
Hey i think i found solution for this but i haven't tried it yet coz i don't have linux http://forum.xda-developers.com/showthread.php?t=2573743 if u find it useful or have any other solution please let me know. I am so upset since when my S1 is hard brickes that i am using nokia 1208 . please msg me if u find the solution
idragon81 said:
Sort of
We Actually need someone who does have a working Titanium S1 or Cherry Flame2.
If you find someone who does have it Please ask them to do the following
1) Switch off the Working Mobile
2) Switch it on by pressing the vol+ Key and wait untill it shows the "Entry QPST Download" Screen
3) Connect your mobile to Windows
4) Start Acronis and make a Sector by sector backup
5) Now Switch on your bricked mobile and connect it to windows
6) Start Acronis and do a restore that you made from the working Titanium S1 or Flame2
7) Reboot
This should do the job.However i was unable to find someone with the same mobile.Hope Somebody can help.
If anybody has the Backup.Please post it so that others can also Restore their mobile if bricked.
Thank you
Click to expand...
Click to collapse
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.
kalmukale said:
I was going to post a same request. But i thought i will find it myself. Then i found instructions using acronis with an img file of Archos Platinum 50. Then i flashed that file on S1. Now my phone won't even show RESET FOR ENTRY QPST DOWNLOAD. However it can enter ENTRY QPST DOWNLOAD.
Click to expand...
Click to collapse
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot
Help!
adubu said:
Made a backup of the partitions following you method......but came up with lots of them and dont know which partition is the right one
here is the screenshot
Click to expand...
Click to collapse
Can anyone please help us.. on how to build the correct image back up for Cherry mobile flame 2.0, we need a complete package that can be flashed thru EMMC Download... or better yet sir can you make a back up using the emmc Download tool? thanks a bunch!
looking forward to resolve this issue.
Can anyone please... Post a Acronis backup file of Partition3sector for Karbonn titanium S1 please.......
Hello, im currently with my bricked phone (a Huawei Vitria from MetroPCS) it is rooted and running on 4.1.2, but it's not bootloader unlocked. I have searched everywhere for a solution, after my phone got bricked after installing the Chainfire 3d drivers. I have tried to hard reset my phone, but when i go to bootloader, it comes up with "Check sd update pkg is exist... make sure usb has been inserted! usb update starting" I have no idea what to do! I rooted with framaroot. I need help fast!
In some Devices Chainfire3D Dosent Work Nd U Will Get bootloop.
Or If supported Then Ur Phone Must be Rooted Successfully
Eg-Galaxy Star Gts5282 Cant Fool Gpu Nd Cant Run Chain Fire 3D .
Try To Install Stock ....
_________________________________
Sent From My N7100
Using Galaxy Y As ExperimenT
Always Press ThanKS IF I HelpeD.
Don't u have to have bootloader unlocked to install stock?
I think you could solve the problem flashing your rom again...
Here's some nice info that may help you:
http://forum.xda-developers.com/showthread.php?t=2517202
http://androidforums.com/vitria-all-things-root/789543-vitria-info.html
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=17935
when i root and force no encrypt my device .. and when i try to install the new 5.0.1 lrx2q to cc .. i doesnt update .. in twrp shows
Unable to mount storage .. so i remove the root and the no force enrcypt .. cause they said that if you unroot it youll update with out
problems to 5.0.1 .. so i download the wugs toolkit and flash the 5.0.1 .. when i turn on the device .. MY GOD !!!
When i update the g apps .. it says there is insuficient device !! !! now can anyone help me ! pls im still looking for solution !!
Just fastboot back to factory stock, then try again. Don't use a toolkit or anything. Just download and setup fastboot, download google images and flash them. You can see exactly what's happening.
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
handsome_94 said:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
Click to expand...
Click to collapse
Got it!!
All roms of INFOCUS are given on their Taiwan website. Unfortunately, the site is in local language but with little exploration I was able to find out the rom in it. I'm pasting a link to it:
Code:
dl.infocusphone.com/update/M370_00WW(INF)/FAO-1120-0-00WW-A01-update.zip
This worked absolutely fine on my phone with stock recovery.
Procedure Required
Please help me to follow the procedure for doing this ....my phone isn"t working for 1 month service centers also nothing to do
saikrishna veerla said:
Please help me to follow the procedure for doing this ....my phone isn"t working for 1 month service centers also nothing to do
Click to expand...
Click to collapse
Ok, here is the procedure.
1) Download firmware for your phone (I'm supposing its m370i) and put it in a mini SD card.
2) Now insert this memory card into your phone, and boot into recovery mode.
3) Now select update zip from SD Card and select the firmware file in your SD Card.
4) Once the operation has started wait for 15-20 mins. for the entire process to end. Do not restart the phone till the procedure ends on its own.
That's it!!
Infocus M370i
Hello ,
At the moment I have this Phone in my hand ..
Its getting error on Unfortunately ,System UI has stopped !!
I already download Rom ..
But Phone can't go to Recovery Mode ..
Plz shear if have any way to put Recovery Mode !!
Thanks
Wbr'
AniAXN
AniAXN said:
Hello ,
At the moment I have this Phone in my hand ..
Its getting error on Unfortunately ,System UI has stopped !!
I already download Rom ..
But Phone can't go to Recovery Mode ..
Plz shear if have any way to put Recovery Mode !!
Thanks
Wbr'
AniAXN
Click to expand...
Click to collapse
1) Make sure you have adb and fastboot
2) Enable USB debugging in your phone (In developer options)
3) Change your USB computer connection -> Camera (PTP)
4) Execute command "adb devices" Now it should show your device's serial on the screen.
5) After (4) execute the command "adb reboot recovery". That's it.
Error to Install
handsome_94 said:
1) Make sure you have adb and fastboot
2) Enable USB debugging in your phone (In developer options)
3) Change your USB computer connection -> Camera (PTP)
4) Execute command "adb devices" Now it should show your device's serial on the screen.
5) After (4) execute the command "adb reboot recovery". That's it.
Click to expand...
Click to collapse
Hello ..
I Trying Install in Recovery Mode with SD Card
But Get This Error ..
Here I Use Your File which you Post ..
I Don't know why i can't post screen shot ..???
Wbr'
AniAXN
handsome_94 said:
Got it!!
All roms of INFOCUS are given on their Taiwan website. Unfortunately, the site is in local language but with little exploration I was able to find out the rom in it. I'm pasting a link to it:
Code:
dl.infocusphone.com/update/M370_00WW(INF)/FAO-1120-0-00WW-A01-update.zip
This worked absolutely fine on my phone with stock recovery.
Click to expand...
Click to collapse
This firmware is meant for M370. Will it function properly on M370i?
I compared the hardware properties and I don't seem to identify any relevant differences, so, I just want to confirm here.
von COLLINZO said:
This firmware is meant for M370. Will it function properly on M370i?
I compared the hardware properties and I don't seem to identify any relevant differences, so, I just want to confirm here.
Click to expand...
Click to collapse
Yes, It has worked on my Infocus M370i twice (1 GB Ram/8 GB memory). I'm not so sure about 2 GB version as I don't have it but theoretically it should work on it too.
Hello ..
This Rom not work with my Phone ..!!
If any body have this file ..
Plz shear here ..
Its I need very badly ..
Wbr'
AniAXN
how to root infocus m370i please help
puipuia said:
how to root infocus m370i please help
Click to expand...
Click to collapse
Use kingroot app to root m370i. Search, download the app of this app from Google. Run it and in press of a button everything will get done.
try to install system update but I remove some system app will this brick my phone if I install it...please help
khopsa said:
try to install system update but I remove some system app will this brick my phone if I install it...please help
Click to expand...
Click to collapse
If you have ever rooted your phone which I believe you have, then installing software update will brick your phone.
To avoid this, you should first install stock rom and then update the system.
thanks for your reply....
is there any custom ROM for infocus m370i...
how to root infocus m 370i
---------- Post added at 08:10 AM ---------- Previous post was at 08:07 AM ----------
kingroot is not working both apk and pc version in infocus m 370i.can it works for u ? pls rply
handsome_94 said:
Hi
My phone Infocus m370i is soft bricked. If you have the stock rom of this (or this phone), then kindly please update the rom on the forum. I've searched everywhere on the net for it and I haven't found it anywhere as of yet.
Thanks,
Click to expand...
Click to collapse
bro how long does it take for verifying update package? Its took 25 mins since the procedure started!
plz help bro
Hi
I am having problem with the touch in my in focus m370i to my knowledge I didn't drop it ... After the latest software update this problem arose .... Any ideas ????
i had done the same procedure tht you told to update the rom from stock recovery but it bricked and showing only logo and restarts wht to do now ?