I'm new at xda. Recently I bought iBall slide cuddle a4 , but as it is latest one, there is no custom recovery or custom ROM for it. However I managed to root it.
I would really be grateful if some guys could port cwm and ROM for this device.
Help Required
Hi,
My Iball Slide is rooted and CWM installed.
But when I try to install a custom rom i messed up ending with boot loop.
I am unable to boot to recovery mode
Also battery is drained.
PC is not detecting the device(Phone) from ADB
I dont have stock rom back up also.
Can anyone help how to come out of this situation
First, this is not a ROM request forum. Second, it's generally considered rude to ask a developer to make a ROM. Developers for the most part do this as a hobby, in their free time with no compensation outside of any donations they may receive. They do not work for you. You are welcome to start reading and researching how to build your own Android ROM.
Please do not make further posts of this nature.
Thread closed.
Related
Hello.
I have a Samsung Galaxy W I8150 aka Samsung Ancora. There are now forums for this phone yet, and no custom roms, etc. I've managed to root it with zergRush. I am not a developer (yet) but I have quite few computer skills. I am IT beginer (working as system administrator), but I have some programming skills.
Now I would like to give something to the community at XDA forum. So I've decieded that I will try to port some of the costum recovery (CWM, AmonRa, or some other) on my phone. Well my first problem is that samung has this Odin instead of recovery like HTC, so I would need some instuructions (or links with instructions), that will help me started.
PLEASE if any of you could point me into the right direction, and explain me the bascis, how this recovery stuff work, I would really apreciate that!
Have a nice day all of you!
Hi guys
I'm following XDA forum for some years now, under a different nickname, and this is my first post.
Unfortunately this is a Help Me!!! post
This is the situation:
My son as a A13 Q88E board android tablet, and a friend of him, made some experiences with the device, installing CWM-based Recovery v6.0.1.2. in it.
Now it's stuck on a neverending bootloop recovery.
I Know that i could flash a new rom, but the problem is that this one in particular ins't available nowhere. It's a Avery E700, similar to Navcity NT-1710, and others, actually they are the exact same thing, only diferent brands.
The solution that is rolling over the internet it's to flash a Mapan rom (MX713), but chances are that it will not work 100%.
I would like to remove the CWM recovery so i can boot into system again.
Somehow i managed to extract a rom dump of the installed original rom, but that's it, i'm stuck there, i can't restore that backup, and right now i just can't afford to buy a new tablet for him.
Is there any way to replace that CWM-based recovery?
Sorry for the log post, and i want to say thanks in advance to all help you can provide.
Fernando
Jmf Info said:
Hi guys
I'm following XDA forum for some years now, under a different nickname, and this is my first post.
Unfortunately this is a Help Me!!! post
This is the situation:
My son as a A13 Q88E board android tablet, and a friend of him, made some experiences with the device, installing CWM-based Recovery v6.0.1.2. in it.
Now it's stuck on a neverending bootloop recovery.
I Know that i could flash a new rom, but the problem is that this one in particular ins't available nowhere. It's a Avery E700, similar to Navcity NT-1710, and others, actually they are the exact same thing, only diferent brands.
The solution that is rolling over the internet it's to flash a Mapan rom (MX713), but chances are that it will not work 100%.
I would like to remove the CWM recovery so i can boot into system again.
Somehow i managed to extract a rom dump of the installed original rom, but that's it, i'm stuck there, i can't restore that backup, and right now i just can't afford to buy a new tablet for him.
Is there any way to replace that CWM-based recovery?
Sorry for the log post, and i want to say thanks in advance to all help you can provide.
Fernando
Click to expand...
Click to collapse
Best Thing is to Flash the tablet with a proper Firmware..which is very difficult to find.. recently i found a good firmware for my A13 tablet.. it worked very fine with my A13 MID tablet.. i cannot post links yet. try searching this.. tech360lanka(dot)blogspot(dot)com
Q&A for [ROM][18-12-2013] ZTE V987 (MT6589) custom ROMs (JB)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Blocked in stock recovery mod
Hi everyone,
I'm writing this post because I'm hopeless in this moment. I have my ZTE v987 blocked in stock recovery mod ("android system recovery 3e") with no chance to flash or install any ROM or Firmware.
It happens to me when I tried to reflash CWM Recovery 6.0.3.7 with flash tool to reinstall Bruno Rom instead of MIUI ROM. I needeed to reflash because since when I installed MIUI ROM, the CWM rebooted by itself after few seconds, preventing from install any zip file.
Unfortunately, I flashed preloader and after that, my zte dead (it do not even power on).
However, reading some tread and many, many posts and guides about to unbrick mtk65xx, I find a solution (thanks to Bruno) to raise from the death my smartphone. Basically, I was able to flash my zte using flash tool and "ZTE V987 stock partitions" (posted by Bruno to another member of this comunity) but from that I'm blocked in android system recovery 3e.
Can everyone help me, please?
Thanks a lot
You just need to flash CWM recovery, that's all.
bgcngm said:
You just need to flash CWM recovery, that's all.
Click to expand...
Click to collapse
Thanks for the answer.
I found a solution and now my zte v987 works fine, but I have still some huge problems:
SIM not detected, pttycmd1 not found, NVRAM empty
Unfortunately, the only way to resolve these problems is to get another functioning zte v987 and make a backup with Mtk droid tools. So, I can make a radio and NVRAM restore.
There is nobody in my town with this model of zte smartphone and I can't do nothing to bring back my phone.
If anybody can help me posting this backup, I will appreciate a lot
can i install this rom on my zte v967s
dalexander said:
Unfortunately, the only way to resolve these problems is to get another functioning zte v987 and make a backup with Mtk droid tools. So, I can make a radio and NVRAM restore.
There is nobody in my town with this model of zte smartphone and I can't do nothing to bring back my phone.
Click to expand...
Click to collapse
I don't have V987 anymore, but fortunatelly I kept some old files on the computer. You can find in attachment my old V987 NVRAM backup. After flashing it you should change IMEI numbers.
gautam2010 said:
can i install this rom on my zte v967s
Click to expand...
Click to collapse
No, it doesn't work on V967S.
Hi Bruno :
The camera make me some problems. Could you make a zip to revert stock app?
I wouldn't like to reinstall again and choose it from aroma installer menu.
Thanks in advance!
ZTE V987 locked network
I flashed a different rom this afternoon but I didn't like so I came back to Bruno's . When I restored my backup my phone asks for my pincode and "INSERT BLOCK ME SIM"
I got my unlocked phone so I sent an email to the webpage where I bought it, but I have no idea if they will be able to help me, because I have been flashing my phone.
There is any solution? Any way to get the code or using my simcard without it?
Thanks you for your attention
criscabello said:
I flashed a different rom this afternoon but I didn't like so I came back to Bruno's . When I restored my backup my phone asks for my pincode and "INSERT BLOCK ME SIM"
I got my unlocked phone so I sent an email to the webpage where I bought it, but I have no idea if they will be able to help me, because I have been flashing my phone.
There is any solution? Any way to get the code or using my simcard without it?
Thanks you for your attention
Click to expand...
Click to collapse
Hi, did you solve the problem?
I have the same problem after I flash "HTC ONE M8" firmware. I successful unlock first sim card with 12345678 code, but the second is still locked.
Thank you,
Daniel
Back key
Hi all! This is my first post here at xda forums, so bear with me...
The back key on my V987 does not work anymore. Have anyone had similar problem with this device? Could it be physical fault?
BR,
Kurt
Edit: Ok, found this, have to try it first.
ZTE v987 Grand Quad Lite is Completly Off During flash
Any Body can Please Help How to revert it back all
i have zte v987 phone while flashing of recovery my mobile is get switched off . if i pressed power button also doesnt work
please help me how to rectify this issue
Q&A for [RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG] . If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can't boot into Android
Hey there!
Hope you are able to help with this little trouble: I have successfully installed the ROM following all steps, but when I finished it and the phone booted up correctly, I saw the available OTA for downloading. Dumb me, I tried to install it (before I saw the warning to not to install it) and since it was taking forever, I rebooted the phone explicitly.
Then all it does is taking me to the Carliv menu and there is no way of getting to boot the system. I'm afraid something in the boot section was corrupted with me trying to install the OTA. I tryied going all way down to the installation process (wipe data, wipe dalvik cache, and installing the ROM again) but nothing.
Any ideas for this idiot? Thanks in advance!
Edit: When I was about to fall into despair, I remembered there was a way to restore everything from stock. So I followed from official Wiko website all the instructions (as superdragonpt posted), and I managed to get my bootloader back on track. Tomorrow I'll try again installing the custom ROM, now without even touching the software updates.
Help with recovery
hi. i have a wiko darkmoon and i tried to make the recovery from superdragonpt but when i connect the phone to install the mtk drivers, nothing appears in the device manager, so i can't install it. i tried the manual installation but when i connect the phone with everything ready (sp flashtool and scatter file) it wont pass from de 0%. what can i do?
PS i trie in every usb port and still the same.
tnx
[RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG]
Hello,
I just installed this ROM and it seems to running just fine! Such a great improvement for my Wiko!
I've been reading through the thread and it seems I should be able to find "Performance" options and be able to open Gravity, but I have no performance options and gravity keeps giving error "GravityBox system framework not responding. Exiting". Some suggested reinstalling gravitybox and installing another cpu app, but I would like to know if that is advisable.
*Is it possible ohter applications might be missing?
Thanks!!
Error when I try to install the rom
Hi,
Everytime I try to install the rom, the recovery said there's an error. This is a little bit weird because I followed all the steps. This is not the first time I have this problem, whenever I want to install this rom (because I tried to install your LeWa OS rom, and it works successfully). I tried to download the rom a second time, but it's the same. I saw that nobody get the same error than me. If you want to know what it says:
- - Installing: /sdcard/WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
And before this, I must to push on "Yes - Install untrusted zip" and it says "E: signature verification failed"
For information, I have the kernel you did.
I hope you can help me, and thanks !
(ew, and sorry for the bad english)
micromax a200
Can i use these rom for micromax a200 which has same spec like wiko darmoon pla say...?
Pls @superdragon reply
Help Please
Hi Guys
I need you help please.
I tried to do somthing with my Wiko Darkmoon, downloaded here from this forum the Stock Darkmoon ROM and the KIT KAT MOD (found in a thread). Started to see if SP Flash could read some information from the phone (don't know how - Ignored the warning : if you don't know what to do than do nothing) and that was the moment when trouble begun.
The PC I was using was the one I have in my office. Don't know what happened PC interrupted what he was doing.
Now PC doesn't see my device anymore (says unknown USB device) and phone doesn't switch on any more.
What can I do to fix it? Did I ruin my phone?????
Hel please, anyon who can explain (in simple words) what to do???
Thank's in advance to anypone
Hi, this is one of smartphone users Micromax A200 aka WIKO darkmoon. I and some forum users 4pda interested in, coming out into the light of your rom aosp 5.0 or 5.1.1? please give your answer , its important for us)))
cwm for Darkmoon
Hey Guys, im searched for a cwm 6.0.5.1 for Wiko Darkmoon. but i cant find a Download link. Have you working Links for me, so i can flashed this recovery?
I will install cm12.1 unofficial, but i have the unofficial kitkat with carliv toch recovery.
how to change this to cwm?
thanks for your answers
Hi everyone,
this thread is about this device http://www.goclever.com/uk/products,c1/tablet,c5/archive,c98/quantum-700,a369.html#specification
I have tried to find something about this not so lucky device info on web and me as not so lucky user ..
I need to install custom recovery on it, TRWP, CWM, do not matter for me,
i also need to install another custom rom for example cyanogen or else on it..
so i have rooted it with https://superuser.kingoapp.com/ it was best and fastest option to do..
please help me to install Custom recovery on this lovely device )
any ides, options ? tries?