Hello!
I'm trying to flash stock rom on a Galaxy S6 Edge, I downloaded the correct ROM version and tried to flash it through odin.
I checked everything, drivers, usb, odin version, etc.
When trying to flash, odin says fail (just like here):
http://forum.xda-developers.com/attachment.php?attachmentid=3330051&d=1432508561
I tried to open the .tar file, delete the "hidden.img" but after creating a new .tar file (via 7Zip), odin can't load it.
Any ideas?
Thanks!
likely the stock rom you download has a lower version of bootloader than your phone currently have. Try to download the latest official rom for your version, and try again.
niceppl said:
likely the stock rom you download has a lower version of bootloader than your phone currently have. Try to download the latest official rom for your version, and try again.
Click to expand...
Click to collapse
I did, I downloaded the lastest version availabe.
Wassupdog said:
I did, I downloaded the lastest version availabe.
Click to expand...
Click to collapse
try this version of odin, and make sure youre using the micro usb chord that came with the phone
TookRDerbs said:
try this version of odin, and make sure youre using the micro usb chord that came with the phone
Click to expand...
Click to collapse
I did, nothing works .
Wassupdog said:
I did, nothing works .
Click to expand...
Click to collapse
i would download the .tar file again, might have just been a bad download. that odin always works with my sprint edge. just wondering are you doing a hard reset and going back into download mode? (hard reset: volume down and power together)
First of all. What version do you have? What you trying to install?
Skickat från min SM-G925F via Tapatalk
---------- Post added at 07:18 PM ---------- Previous post was at 07:16 PM ----------
Does it boot?
Skickat från min SM-G925F via Tapatalk
superior888 said:
First of all. What version do you have? What you trying to install?
Skickat från min SM-G925F via Tapatalk
---------- Post added at 07:18 PM ---------- Previous post was at 07:16 PM ----------
Does it boot?
Skickat från min SM-G925F via Tapatalk
Click to expand...
Click to collapse
It won't boot, and I'm not sure about the version as failing to flash stock at first got the device to it's correct state.
You're trying to flash an s6 rom. G925 is the edge.
Related
OH NO! I tried to reflah stock in ODIN after a failed OTA update today and the flash in Odin failed. I went to turn the phone back on and am getting a message stating:
Firmware Upgrade encounter an issue. Please select recovery mode in Kies and try again. This happens when I power on normally, when I hold volume down, and when I hold home/vol up/power.
WHAT HAVE I DONE? Odin doesn't seem to pick the phone up now. HELP!!!
Am I screwed???
fishacura said:
OH NO! I tried to reflah stock in ODIN after a failed OTA update today and the flash in Odin failed. I went to turn the phone back on and am getting a message stating:
Firmware Upgrade encounter an issue. Please select recovery mode in Kies and try again. This happens when I power on normally, when I hold volume down, and when I hold home/vol up/power.
WHAT HAVE I DONE? Odin doesn't seem to pick the phone up now. HELP!!!
Am I screwed???
Click to expand...
Click to collapse
Slight update...I downloaded the Kies software but it is not recognizing my phone. I keep troubloeshooting the connection but nothing. Seems like perhaps some sort of "gadget driver" is not installed properly but I cannot seem to fix it.
If anyone can assist I'd be appreciative.
fishacura said:
Slight update...I downloaded the Kies software but it is not recognizing my phone. I keep troubloeshooting the connection but nothing. Seems like perhaps some sort of "gadget driver" is not installed properly but I cannot seem to fix it.
If anyone can assist I'd be appreciative.
Click to expand...
Click to collapse
Anyone have any insight into why Kies might not recognize the device? All drivers now seem like they're installed fine but I keep getting the communication screen in kies cycling without finding the phone so I can do a firmware recovery.
fishacura said:
Anyone have any insight into why Kies might not recognize the device? All drivers now seem like they're installed fine but I keep getting the communication screen in kies cycling without finding the phone so I can do a firmware recovery.
Click to expand...
Click to collapse
Are you using the official samsung usb cable?
Sent from my SCH-I545 using Tapatalk 4 Beta
Evil-Eye said:
Are you using the official samsung usb cable?
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I believe so. I did think of that last night and believe I was using the right one but I'll double check. I'm going to uninstall everything then reinstall and see if that works...if not, it's bricked.
fishacura said:
I believe so. I did think of that last night and believe I was using the right one but I'll double check. I'm going to uninstall everything then reinstall and see if that works...if not, it's bricked.
Click to expand...
Click to collapse
I too got an error on ota now I'm scared to update on pc. I got error 402. What one did you get?
Sent from my SCH-I545 using Tapatalk 4 Beta
---------- Post added at 03:08 PM ---------- Previous post was at 03:03 PM ----------
Also are you on stock recovery? I read that is a must to update.
Sent from my SCH-I545 using Tapatalk 4 Beta
Evil-Eye said:
I too got an error on ota now I'm scared to update on pc. I got error 402. What one did you get?
Sent from my SCH-I545 using Tapatalk 4 Beta
---------- Post added at 03:08 PM ---------- Previous post was at 03:03 PM ----------
Also are you on stock recovery? I read that is a must to update.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I don't recall the specific error but it said "Intall Unsuccessful" or something like that.
It was however successful enough to remove root from my device. So once that happened, I figured I should go back and flash the stock rom using Odin. Big mistake. Tried it and now my phone is bricked with the firmware error saying to use Kies to recover. Problem is (as stated above) Kies can't even see the device.
sry if there is another post about this but im'm in a real hurry
i tried to root and forgot about usb debbuging and got "recovery booting recovery is not seandroid enforcing set warranty bit recovery"
i turned on usb debbuging and odin says transfer complete and all but nothing happens. the phone starts in a screan that says recovery booting recovery is not seandroid enforcing set warranty bit recovery and i have to pres power vol - and home and vol down to cancel so that i can start the phone.
phone model is sm-n900p running android 4.3
i tried to flash a new rom with odin and it didn't work.
please help i really nead to fix this in a day at most so any sugestions are apreciated
Go into stock recovery and do a wipe (volume up, home and power button at same time) , that might start you back up, if not, just go into dl mode and flash the mj4 tar you should be good
Sent from my SM-N900P using Tapatalk
tonyevo52 said:
Go into stock recovery and do a wipe (volume up, home and power button at same time) , that might start you back up, if not, just go into dl mode and flash the mj4 tar you should be good
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
i can't go in recovery. home pover volum+ get's me to the same screen : "recovery booting recovery is not seandroid enforcing set warranty bit recovery" and the note 3 logo below.
sry i'n not a noob at this but i'm not an expert eather. what is mj4 and where can i find it. i tried to flash CF-Auto-Root-hltespr-hltespr-smn900p.zip that is what i found in the tutorial i got.
Valentin6282 said:
i can't go in recovery. home pover volum+ get's me to the same screen : "recovery booting recovery is not seandroid enforcing set warranty bit recovery" and the note 3 logo below.
sry i'n not a noob at this but i'm not an expert eather. what is mj4 and where can i find it. i tried to flash CF-Auto-Root-hltespr-hltespr-smn900p.zip that is what i found in the tutorial i got.
Click to expand...
Click to collapse
This is the link for KK of that's what you want to do, you need to go stock 4.3 first
http://forum.xda-developers.com/showthread.php?t=2630514 go here and follow the instructions on page 1. You need to get to the download screen first and then follow the instructions... Pull your battery, put it back in, and then press volume down, home, and power at the same time to get to dl mode.. You'll be ok,.
Sent from my SM-N900P using Tapatalk
---------- Post added at 05:26 PM ---------- Previous post was at 05:24 PM ----------
Valentin6282 said:
i can't go in recovery. home pover volum+ get's me to the same screen : "recovery booting recovery is not seandroid enforcing set warranty bit recovery" and the note 3 logo below.
sry i'n not a noob at this but i'm not an expert eather. what is mj4 and where can i find it. i tried to flash CF-Auto-Root-hltespr-hltespr-smn900p.zip that is what i found in the tutorial i got.
Click to expand...
Click to collapse
Mj4 is your current system, you will need to be on that first.. Let me find a link for you.
Sent from my SM-N900P using Tapatalk
i tried to flash a new rom in dl mode with odin and it failed. i'l try the update and hope it works. but it will take around 30 mins to download it.
tonyevo52 said:
http://forum.xda-developers.com/showthread.php?t=2630514 go here and follow the instructions on page 1. You need to get to the download screen first and then follow the instructions... Pull your battery, put it back in, and then press volume down, home, and power at the same time to get to dl mode.. You'll be ok,.
Sent from my SM-N900P using Tapatalk
---------- Post added at 05:26 PM ---------- Previous post was at 05:24 PM ----------
Mj4 is your current system, you will need to be on that first.. Let me find a link for you.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Follow this link and go complete stock first... http://forum.xda-developers.com/showthread.php?t=2657828 and the cf auto file you were talking about is how you root the phone with that file
Sent from my SM-N900P using Tapatalk
---------- Post added at 05:31 PM ---------- Previous post was at 05:30 PM ----------
The second link will update you to KK I'd that's what you want to do
Sent from my SM-N900P using Tapatalk
---------- Post added at 05:34 PM ---------- Previous post was at 05:31 PM ----------
Good luck, hope I didn't confuse you. Just go complete stock and then you'll be good, and if you have time, then do the other link for KK
Sent from my SM-N900P using Tapatalk
not confusing. the they explanations are simple thank you. i'm downloading the files now and i'm going to do all the updates first.
two more questions
1 if i do all the updates you told me. i should use the CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 file to root or something else?
2 i tried to flash a rom for sm-n900 and it didn't work odin sayd fail. did it not work because mine is sm-n900p or because i did something and now i can't flash thing on it in wich case i won't be able to flash the updates eather?
Valentin6282 said:
not confusing. the they explanations are simple thank you. i'm downloading the files now and i'm going to do all the updates first.
two more questions
1 if i do all the updates you told me. i should use the CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 file to root or something else?
2 i tried to flash a rom for sm-n900 and it didn't work odin sayd fail. did it not work because mine is sm-n900p or because i did something and now i can't flash thing on it in wich case i won't be able to flash the updates eather?
Click to expand...
Click to collapse
1. If you stay on mj4 (4.3) then you want to follow this method to root http://forum.xda-developers.com/showthread.php?t=2474222 there's videos and super simple, if you go KK then yea, you need to use chain fires auto root for the 9005, make sure you put the tar file and not the md5 file.
2. You don't flash roms in Odin, you need to flash roms using twrp (that's the recovery), might be why you ran into problems in the first place.
Sent from my SM-N900P using Tapatalk
---------- Post added at 05:49 PM ---------- Previous post was at 05:46 PM ----------
It can all be very confusing at first, once you learn the terms and types of files, gets pretty simple, but read read read.. And if something sounds real crazy, Google or search the forums.
Sent from my SM-N900P using Tapatalk
tonyevo52 said:
1. If you stay on mj4 (4.3) then you want to follow this method to root http://forum.xda-developers.com/showthread.php?t=2474222 there's videos and super simple, if you go KK then yea, you need to use chain fires auto root for the 9005, make sure you put the tar file and not the md5 file.
2. You don't flash roms in Odin, you need to flash roms using twrp (that's the recovery), might be why you ran into problems in the first place.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
the only time i flashed a rom was for an s2 and it worked with odin. don't know any other method. if recovery is volum up home and power i can't do that i get the note logo and the error i mentioned above it.
my problem is that i need to fix this quick and reading a lot of forums takes time i don't have. that's why i started dtis post. in the hopes that someone had time to walk me through all tha paces step by step even if he/she feels like shooting me after
Valentin6282 said:
the only time i flashed a rom was for an s2 and it worked with odin. don't know any other method. if recovery is volum up home and power i can't do that i get the note logo and the error i mentioned above it.
Click to expand...
Click to collapse
You need to get to the download mode, pull your battery, put it back in, press volume down, the home button, and power at the same time, hold it until the phone vibrates and the screen turns on, it will tell you to press over of two options, you want the dl mode option. If you have a case, take it out of the case and try, might be preventing you from hitting all three at the same time.
Sent from my SM-N900P using Tapatalk
tonyevo52 said:
You need to get to the download mode, pull your battery, put it back in, press volume down, the home button, and power at the same time, hold it until the phone vibrates and the screen turns on, it will tell you to press over of two options, you want the dl mode option
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
that i can do
then i run the SM-N900P MJ4 Full Restore Unrooted (Compressed Archive).exe file from the post you gave me on my computer?
or on the phone?
sry for the noob questions. i never di this before and it's not nice to start something new when i'm pressed for time.
Valentin6282 said:
that i can do
then i run the SM-N900P MJ4 Full Restore Unrooted (Compressed Archive).exe file from the post you gave me on my computer?
or on the phone?
sry for the noob questions. i never di this before and it's not nice to start something new when i'm pressed for time.
Click to expand...
Click to collapse
Yep, make sure your phone is recognized in the program when it comes up, takes a few minutes to start up and about 15 to run. Make sure you run the program as administrator.. Once you do this, your phone will be completely stock like you just took it out the box
Sent from my SM-N900P using Tapatalk
---------- Post added at 06:01 PM ---------- Previous post was at 05:59 PM ----------
Run it on the computer
Sent from my SM-N900P using Tapatalk
i am instalink the mj4 now and it seems to be working.
for the updates i noticed that the instructions sayd to copy the files to the external sd. can't it be the internal sd, or does it really have to be the external one because i don't have an external sd right now.
and if it can't be the internal sd, then what file should i use to root whithout the updates, just the mj4?
just realised that was a stupid question. i found a long forgotten 1gb sd. does the CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 file work on nabd or should i only upgrade to nab?
tonyevo52 said:
Yep, make sure your phone is recognized in the program when it comes up, takes a few minutes to start up and about 15 to run. Make sure you run the program as administrator.. Once you do this, your phone will be completely stock like you just took it out the box
Sent from my SM-N900P using Tapatalk
---------- Post added at 06:01 PM ---------- Previous post was at 05:59 PM ----------
Run it on the computer
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
the root doesn't work. i instaled the mj4 and no errors when i tried the root you recomended for the mj4 it instaled bu after resset i got the logo screen with "recovery booting recovery is not seandroid enforcing set warranty bit recovery" on top. anymore ideeas?
Valentin6282 said:
the root doesn't work. i instaled the mj4 and no errors when i tried the root you recomended for the mj4 it instaled bu after resset i got the logo screen with "recovery booting recovery is not seandroid enforcing set warranty bit recovery" on top. anymore ideeas?
Click to expand...
Click to collapse
That root only works on 4.4.2 if your on 4.3 go download cf auto root for mj4 in chain fires thread the 900p sprint note 3
if you take the ota update to kit kat that root will work
Sent from my SM-N900P using Xparent BlueTapatalk 2
Epix4G said:
That root only works on 4.4.2 if your on 4.3 go download cf auto root for mj4 in chain fires thread the 900p sprint note 3
if you take the ota update to kit kat that root will work
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
i used the CF-Auto-Root-hltespr-hltespr-smn900p.tar.md5 file last. it gave the same error. i'l try to see if i can upgrade to nabd and usea the 9005 file.
everywhere i see they sayd i should get a yelow box in odin but i get a blue one when i trie to instal the root? is that a problem? odin says added
yey. i finaly did it. i flashed mj4 agayn, instaled the nab upgrade than flashed CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 with odin and it worked,
thank you for all your help.
God morning.
I have a Galaxy S4. I installed safestrap and some custom roms (kept my stock rom). I know want to remove all this and go back to stock. I have done a complete unroot in SuperSU and uninstalled (or so I thought), SafeStrap. However, when I restart my phone, safestrap is still booting and I get a lock on the screen with the word Custom underneath. I want to get rid of all of this and just go back to stock. It's Verizon S4 on MK2.
Any help would be appreciated.
Thanks.
wyzard01 said:
God morning.
I have a Galaxy S4. I installed safestrap and some custom roms (kept my stock rom). I know want to remove all this and go back to stock. I have done a complete unroot in SuperSU and uninstalled (or so I thought), SafeStrap. However, when I restart my phone, safestrap is still booting and I get a lock on the screen with the word Custom underneath. I want to get rid of all of this and just go back to stock. It's Verizon S4 on MK2.
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
You can try just uninstalling SafeStrap like any other app you have. Or flash the mk2 stock firmware in Odin.
Going the Odin way would actually be the better and easier way to go most likely. Sometimes the custom screen still lingers even after removing SafeStrap.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 06:39 AM ---------- Previous post was at 06:37 AM ----------
Here's the mk2 tar file link
http://forum.xda-developers.com/showthread.php?t=2578209
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You can try just uninstalling SafeStrap like any other app you have. Or flash the mk2 stock firmware in Odin.
Going the Odin way would actually be the better and easier way to go most likely. Sometimes the custom screen still lingers even after removing SafeStrap.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 06:39 AM ---------- Previous post was at 06:37 AM ----------
Here's the mk2 tar file link
http://forum.xda-developers.com/showthread.php?t=2578209
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Can you give me some more details or links on how to use the Odin way.
Thank you.
wyzard01 said:
Can you give me some more details or links on how to use the Odin way.
Thank you.
Click to expand...
Click to collapse
The first post in that thread explains what you'll need to do. Its a lot easier than a lot of people think.
- Download the USB drivers to your computer ( I believe they're linked in first post)
- Download the stock firmware zip in 1st post ( either full wipe or no wipe )
-download Odin from 1st post
- extract the .tar file from the firmware zip file
- open up Odin
- make sure you see it shows Device Connect when you plug your phone in
- load that .tar file into the PDA slot in Odin or AP slot depending on the version of Odin .
- make sure Re-Partition is NOT checked.
- hit start and wait for it to finish.
Again that's all said in the op.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 07:00 AM ---------- Previous post was at 06:57 AM ----------
Lol I'm tired I forgot to tell you that you need to put your phone into Download Mode and THEN connect it to your PC and THEN flash the file
Sent from my SCH-I545 using Tapatalk
---------- Post added at 07:09 AM ---------- Previous post was at 07:00 AM ----------
wyzard01 said:
Can you give me some more details or links on how to use the Odin way.
Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2337590
There are some great videos on there.
Including how to unbrick an S4 and enter download mode. Your essentially unbricking your phone even though its not technically a brick.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
The first post in that thread explains what you'll need to do. Its a lot easier than a lot of people think.
- Download the USB drivers to your computer ( I believe they're linked in first post)
- Download the stock firmware zip in 1st post ( either full wipe or no wipe )
-download Odin from 1st post
- extract the .tar file from the firmware zip file
- open up Odin
- make sure you see it shows Device Connect when you plug your phone in
- load that .tar file into the PDA slot in Odin or AP slot depending on the version of Odin .
- make sure Re-Partition is NOT checked.
- hit start and wait for it to finish.
Again that's all said in the op.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 07:00 AM ---------- Previous post was at 06:57 AM ----------
Lol I'm tired I forgot to tell you that you need to put your phone into Download Mode and THEN connect it to your PC and THEN flash the file
Sent from my SCH-I545 using Tapatalk
---------- Post added at 07:09 AM ---------- Previous post was at 07:00 AM ----------
http://forum.xda-developers.com/showthread.php?t=2337590
There are some great videos on there.
Including how to unbrick an S4 and enter download mode. Your essentially unbricking your phone even though its not technically a brick.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Everything's working. Thanks for the help
Just out of curiosity, why did you want to go back to stock? I'm thinking about rooting but unsure on my new phone....
For Samsung Galaxy Note Edge SM-N915P
Build on the latest stock ROM
Stock Deodex - No Root - No Knox - Debloat
ROM Based on
Model: SM-N915P (Snapdragon)
PDA Version N915PVPU4DPD1
Build Date 01.04.2016
Changelist 7697088
OS Marshmallow - Version 6.0.1
[FONT="]DOWNLOAD LINK [/FONT]
[FONT="]Install from [FONT="]TW[FONT="]RP (full wipe are recom)[/FONT][/FONT][/FONT]
N9150BPE1-Binh24ROM.zip 1.4 GB
[FONT="][FONT="][FONT="][FONT="]INSTALL FROM ODIN[/FONT][/FONT][/FONT][/FONT]
KERNEL MODEM 6.0.1
SBOOT-BootLoader 6.0.1
[FONT="]Video Preview 5.1.1:[/FONT]
At work right now, will check it out once I get home. Thanks.
Just what i was looking for.
Cant get linked
Ickyz said:
Cant get linked
Click to expand...
Click to collapse
Uploaded
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Havnt gotten to try it
Tried Rom & Flashed Modem but couldn't get SBOOT, 2 Odin , Kept gettin No Service
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
elfeo0 said:
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
Click to expand...
Click to collapse
Odin sboot+ kernel modem first then Rom
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
I did that first, and it did not work, i did that second and it did not work. I back up my EFS and Modem and flash that too and it did not work. ( i did not made a back up before) but now i do. I will make another back up sonce just got my phone set up again, and will try it again and will post in a hour or so after im done.
I will back up my current phone before trying this.
Steps
1. Odin sboot file. And reboot.
2. Odin Modem file. And reboot.
3. Twrp , clean install of yoir rom.
4. If it works , post to this tread.
5. If it not works, flash back up and post to this tread.
Did not work
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
1. Odin SBOOT-BootLoader 6.0.1
2. Odin KERNEL MODEM 6.0.1
3. Screen shot of phone info settings after I Odin Sboot and Kernel
3. Flash N9150BPE1-Binh24ROM.zip
Took 15 minutes on the LTE Sprint boot screen.
Took 3 to 5 minutes on the Preparing phone set up screen
Was not able to connect to Wi-Fi, and no phone signal, and Screen shot of phone settings after phone set up.
One thing i forgot to mention is that after all its set up i get a pop op aboit sd card being corrupt and to tap it to fix it/format it.
Do you want me to flash or Odin something before I put my back up, as my phone it only good for not being a phone right now?
Update. Now running my back up as i was not able to get a respond and i needed my phone. Thanks, will keep reading this tread to see what happens. Off to work now.
dinaps86 said:
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Click to expand...
Click to collapse
Dinaps,
Did you get this up & going w| Service?
---------- Post added at 01:47 PM ---------- Previous post was at 01:46 PM ----------
How y'all Odin'ing Sboot?
I cant even get odin to find the file
---------- Post added at 02:24 PM ---------- Previous post was at 01:47 PM ----------
Soon as I can im Ditching this PHONE
Tbh I don't remember, it did boot, ik my WiFi was shot I pretty much booted it and than flashed freeza kernel which didn't boot sorry man
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
?
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
The LTE Sprint boot screen takes about 10 to 15 minutes.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Try flash stock Firmware first then odin TWRP to intall this ROM
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Ickyz said:
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Click to expand...
Click to collapse
I have stated this problem. But the OP has not answered on what the problem would be and how ro fix it or what to try. See the screenshots i posted, no baseband. I get no service, no WiFi, it does not work. It allso does not reads the sd card.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
goxthak0 said:
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
Click to expand...
Click to collapse
I flashed it as a Zip in Odin, Kernel & SBOOT but had no luck
Hi,
I flashed PIe beta and then downgraded to stock rom but now i lost the IMIE and Basement.. and there is no network in phone.. please help how i can fix this..
thank you..
stephenlb4u said:
Hi,
I flashed PIe beta and then downgraded to stock rom but now i lost the IMIE and Basement.. and there is no network in phone.. please help how i can fix this..
thank you..
Click to expand...
Click to collapse
You will need to flash full Stock Firmware from Odin and that should do the trick
Thank you.. fixed it
Same issue
Hello,
I am having a same issue and had no luck flashing back to the unlocked version.
I previously had unlocked version purchased from Samsung.
To test pie, I flashed to T mobile version, and updated to pie. My current service provider is Verizon.
Could you please help me to go back to unlocked version??
stephenlb4u said:
Thank you.. fixed it
Click to expand...
Click to collapse
Could you please help me how you fixed it? I downloaded arg8 from samfirm, and it still does the same. Please help. I am stuck with CRI6 right now.
jong707 said:
Could you please help me how you fixed it? I downloaded arg8 from samfirm, and it still does the same. Please help. I am stuck with CRI6 right now.
Click to expand...
Click to collapse
You would need to set Odin not to auto reboot, you would need to flash ARG8 after it says "Pass" you would need to manually reboot the device into recovery mode and flash one of the Oreo leaks
kevindevonwilliams said:
You would need to set Odin not to auto reboot, you would need to flash ARG8 after it says "Pass" you would need to manually reboot the device into recovery mode and flash one of the Oreo leaks
Click to expand...
Click to collapse
use 4 odin files that you usually would do? BL, AP, CP, CSC (not home one),
then manually reboots by pressing vol down and power key
when it reboots, vol up, bixby, and power then install update from SD card.
Correct? Do i need to do the entire process again if the phone reboots? (showing Start)
jong707 said:
use 4 odin files that you usually would do? BL, AP, CP, CSC (not home one),
then manually reboots by pressing vol down and power key
when it reboots, vol up, bixby, and power then install update from SD card.
Correct? Do i need to do the entire process again if the phone reboots? (showing Start)
Click to expand...
Click to collapse
Yes the procedure is correct, once done in a timely manner..
What error are you facing when trying to flash an Oreo OTA file via Recovery
I dont get an error message. I still get unknown issue even after doing that.
---------- Post added at 10:44 PM ---------- Previous post was at 10:36 PM ----------
kevindevonwilliams said:
Yes the procedure is correct, once done in a timely manner..
What error are you facing when trying to flash an Oreo OTA file via Recovery
Click to expand...
Click to collapse
Still unknown IMEI and baseband. Do i have to use odin 13.1 or the patched one 3B?
jong707 said:
I dont get an error message. I still get unknown issue even after doing that.
---------- Post added at 10:44 PM ---------- Previous post was at 10:36 PM ----------
Still unknown IMEI and baseband. Do i have to use odin 13.1 or the patched one 3B?
Click to expand...
Click to collapse
Patched Odin, what does your software version says in settings?
Baseband: G965usqu3cri6
service provider sw ver. Saomc_sm-g965u_oyn_vzw_pp_0013
this is what worked for me,
1. install G965USQS3ARG8_TMB using odin
2. install Pie update.zip file
3. you should get network now ( hope it works for you too)
4. Flash G965USQS3ARG8 again.. and you should be all set
when you update to Pie, use CR5 not the CR6