For Samsung Galaxy Note Edge SM-N915P
Build on the latest stock ROM
Stock Deodex - No Root - No Knox - Debloat
ROM Based on
Model: SM-N915P (Snapdragon)
PDA Version N915PVPU4DPD1
Build Date 01.04.2016
Changelist 7697088
OS Marshmallow - Version 6.0.1
[FONT="]DOWNLOAD LINK [/FONT]
[FONT="]Install from [FONT="]TW[FONT="]RP (full wipe are recom)[/FONT][/FONT][/FONT]
N9150BPE1-Binh24ROM.zip 1.4 GB
[FONT="][FONT="][FONT="][FONT="]INSTALL FROM ODIN[/FONT][/FONT][/FONT][/FONT]
KERNEL MODEM 6.0.1
SBOOT-BootLoader 6.0.1
[FONT="]Video Preview 5.1.1:[/FONT]
At work right now, will check it out once I get home. Thanks.
Just what i was looking for.
Cant get linked
Ickyz said:
Cant get linked
Click to expand...
Click to collapse
Uploaded
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Havnt gotten to try it
Tried Rom & Flashed Modem but couldn't get SBOOT, 2 Odin , Kept gettin No Service
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
elfeo0 said:
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
Click to expand...
Click to collapse
Odin sboot+ kernel modem first then Rom
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
I did that first, and it did not work, i did that second and it did not work. I back up my EFS and Modem and flash that too and it did not work. ( i did not made a back up before) but now i do. I will make another back up sonce just got my phone set up again, and will try it again and will post in a hour or so after im done.
I will back up my current phone before trying this.
Steps
1. Odin sboot file. And reboot.
2. Odin Modem file. And reboot.
3. Twrp , clean install of yoir rom.
4. If it works , post to this tread.
5. If it not works, flash back up and post to this tread.
Did not work
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
1. Odin SBOOT-BootLoader 6.0.1
2. Odin KERNEL MODEM 6.0.1
3. Screen shot of phone info settings after I Odin Sboot and Kernel
3. Flash N9150BPE1-Binh24ROM.zip
Took 15 minutes on the LTE Sprint boot screen.
Took 3 to 5 minutes on the Preparing phone set up screen
Was not able to connect to Wi-Fi, and no phone signal, and Screen shot of phone settings after phone set up.
One thing i forgot to mention is that after all its set up i get a pop op aboit sd card being corrupt and to tap it to fix it/format it.
Do you want me to flash or Odin something before I put my back up, as my phone it only good for not being a phone right now?
Update. Now running my back up as i was not able to get a respond and i needed my phone. Thanks, will keep reading this tread to see what happens. Off to work now.
dinaps86 said:
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Click to expand...
Click to collapse
Dinaps,
Did you get this up & going w| Service?
---------- Post added at 01:47 PM ---------- Previous post was at 01:46 PM ----------
How y'all Odin'ing Sboot?
I cant even get odin to find the file
---------- Post added at 02:24 PM ---------- Previous post was at 01:47 PM ----------
Soon as I can im Ditching this PHONE
Tbh I don't remember, it did boot, ik my WiFi was shot I pretty much booted it and than flashed freeza kernel which didn't boot sorry man
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
?
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
The LTE Sprint boot screen takes about 10 to 15 minutes.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Try flash stock Firmware first then odin TWRP to intall this ROM
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Ickyz said:
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Click to expand...
Click to collapse
I have stated this problem. But the OP has not answered on what the problem would be and how ro fix it or what to try. See the screenshots i posted, no baseband. I get no service, no WiFi, it does not work. It allso does not reads the sd card.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
goxthak0 said:
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
Click to expand...
Click to collapse
I flashed it as a Zip in Odin, Kernel & SBOOT but had no luck
Related
I've basically soft bricked my phone and haven't got a clue how to fix it. I've read everything and tried everything and still can't get it working with my knowledge.
I tried to flash resurrection v1.0 but phone just hung on the GSII startup screen and froze. I've tried different kernels so that i can flash from external SD card but whenever i try this, it always says bad file (no matter what file i try use to flash). When i try flash from the internal SD card, it says its all successful (for the resurrection 1.0) but i'm back to where i started.
I think i need to flash the firmware using odin but i can't find the right files. Anyone got any ideas how to fix this issue? I've been playing around with it for 10 hours roughly now.
The original kernel i used when i flashed to resurrection 9.4 was for XWKI4.
Thanks.
Nelinski said:
I've basically soft bricked my phone and haven't got a clue how to fix it. I've read everything and tried everything and still can't get it working with my knowledge.
I tried to flash resurrection v1.0 but phone just hung on the GSII startup screen and froze. I've tried different kernels so that i can flash from external SD card but whenever i try this, it always says bad file (no matter what file i try use to flash). When i try flash from the internal SD card, it says its all successful (for the resurrection 1.0) but i'm back to where i started.
I think i need to flash the firmware using odin but i can't find the right files. Anyone got any ideas how to fix this issue? I've been playing around with it for 10 hours roughly now.
The original kernel i used when i flashed to resurrection 9.4 was for XWKI4.
Thanks.
Click to expand...
Click to collapse
Am sure you didnt search before posting but i recommend this
download this and extract, you get three files
load pda, modem and csc
also load pit in the pit tab, uncheck repartition and flash with odin 1.85
goodluck.
http://hotfile.com/dl/123612065/a85a23d/I9100JPKF3.rar.html
http://hotfile.com/dl/139350663/9ba2e55/u1_02_20110310_emmc_EXT4.pit.rar.html
---------- Post added at 04:41 PM ---------- Previous post was at 04:39 PM ----------
here is odin incase you are too lazy to search
http://www.4shared.com/rar/dHnCINEN/odin_185.html
put phone in download mode by pressing volume - +home+power
connect.
If this help and i am sure only flash siyahs kernel... Start CWM and Clear Cache Data and and and all with Clear.. Than flash again.... I had the same prob 3 times because i always flshed over and forgot to cler data;cache;dalvik-cache...
Sent from my GT-I9100 using xda premium
How to flash with Odin Hold Volume UP + Home button + Power button...
Sent from my GT-I9100 using xda premium
Thanks for the help but had one last attempt and got it working. Thanks everyone who helped.
Kaffee4Eck said:
How to flash with Odin Hold Volume UP + Home button + Power button...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thats wrong .
Down not up .
jje
JJEgan said:
Thats wrong .
Down not up .
jje
Click to expand...
Click to collapse
I'm not sure that guy (Kaffee4Eck) knows what he's talking about anyways. In another thread, he also suggested an I9100G user to flash Siyah kernel.
Right i've got it back working with 2.3.4 i think it is, however i still don't want to give in to getting resurrection 1.0.
Are there any steps i'm missing which causes it to hang on GSII startup then restart into the stock kernel? Tried flashing the old bootloader as well which didn't help.
Nelinski said:
Right i've got it back working with 2.3.4 i think it is, however i still don't want to give in to getting resurrection 1.0.
Are there any steps i'm missing which causes it to hang on GSII startup then restart into the stock kernel? Tried flashing the old bootloader as well which didn't help.
Click to expand...
Click to collapse
If you're having trouble flashing a custom ROM, first place to start would be the thread for that particular custom ROM.
All custom ROMs should have detailed installation instructions. Make sure you are following them to the letter.
If you are flashing kernels, you must make sure you flash a kernel meant for your phone, and meant for your build. Hang on boot screen usually means you have a file not compatible with your build of Android. Could be kernel, but could also be another system file.
I have been searching, its what im currently doing now but everyone seems to have got it working or have completely different problems to me.
http://forum.xda-developers.com/showthread.php?t=1436854
Literally followed it step for step, there isn't much to it. When i did 9.4 it had the same steps and that all worked fine, so i must be missing something pretty damn important here.
So when you say:
Nelinski said:
Are there any steps i'm missing which causes it to hang on GSII startup then restart into the stock kernel? Tried flashing the old bootloader as well which didn't help.
Click to expand...
Click to collapse
what do you mean by restart into the stock kernel? This part of the sentence doesn't make sense.
Are you saying it is hanging on the boot logo for a very long time, then it boots normally, but you are not on the new ROM?
Sorry, what i was trying to say was the galaxy s 2 logo shows for about 5 seconds then the phone restarts itself into recovery mode (which is the new kernel included with the resurrection 1.0 flash).
Nelinski said:
Sorry, what i was trying to say was the galaxy s 2 logo shows for about 5 seconds then the phone restarts itself into recovery mode (which is the new kernel included with the resurrection 1.0 flash).
Click to expand...
Click to collapse
And now this sentence doesn't make sense.
So when it restarts into recovery, it is stock recovery instead of CWM recovery? Is that what you mean?
Stock recovery will only have like 4 or 5 line entries, with no options to back up/restore. CWM recovery will have substantially more options.
EDIT to add: BTW - did you see under the "Rom Installation (please don`t miss any step! )" section... there is text that says: "NOTE: İF YOU WANT FLASH SOMETHİNG FROM CWM RECOVERY FİRST YOU MUST İNSTALL CWM.ZİP FROM STOCK RECOVERY MOD(APPLY UPDATE FROM EXTERNAL STORAGE AND CHOOSE CWM.ZİP AND İNSTALL)
AND NOW TOUCH RECOVERY MODE WİLL APPEAR THAN YOU CAN FLASH ZİP FİLES"
---------- Post added at 03:23 PM ---------- Previous post was at 03:11 PM ----------
Also, you seem to be mixing up the terms kernel and recovery. They are NOT the same. You should read up on what those two terms actually mean.
"So when it restarts into recovery, it is stock recovery instead of CWM recovery? Is that what you mean?"
Yeah thats what i meant sorry, been a long day lol. I don't really get what the last bit means..
"NOTE: İF YOU WANT FLASH SOMETHİNG FROM CWM RECOVERY FİRST YOU MUST İNSTALL CWM.ZİP FROM STOCK RECOVERY MOD(APPLY UPDATE FROM EXTERNAL STORAGE AND CHOOSE CWM.ZİP AND İNSTALL)
AND NOW TOUCH RECOVERY MODE WİLL APPEAR THAN YOU CAN FLASH ZİP FİLES"
I've got cwm and can flash roms if thats what it means? Sorry for sounding like such a noob..
Nelinski said:
"So when it restarts into recovery, it is stock recovery instead of CWM recovery? Is that what you mean?"
Yeah thats what i meant sorry, been a long day lol. I don't really get what the last bit means..
"NOTE: İF YOU WANT FLASH SOMETHİNG FROM CWM RECOVERY FİRST YOU MUST İNSTALL CWM.ZİP FROM STOCK RECOVERY MOD(APPLY UPDATE FROM EXTERNAL STORAGE AND CHOOSE CWM.ZİP AND İNSTALL)
AND NOW TOUCH RECOVERY MODE WİLL APPEAR THAN YOU CAN FLASH ZİP FİLES"
I've got cwm and can flash roms if thats what it means? Sorry for sounding like such a noob..
Click to expand...
Click to collapse
So... You know there's also a video guide on installation in that thread too, right? I've never installed this ROM, so I've about reached the limit of how far I can help you if you don't understand that last bit, as you say.
Indeed, i've watched it several times. Thats what i don't get. Everything looks the same, yet i'm the one with the problem lol.
I basically go into custom recovery, install the 3 things (rom, and both gapps), clear the cache and dalvik cache yet it goes freezes on logo then restarts into stock recovery.
Nelinski said:
Indeed, i've watched it several times. Thats what i don't get. Everything looks the same, yet i'm the one with the problem lol.
I basically go into custom recovery, install the 3 things (rom, and both gapps), clear the cache and dalvik cache yet it goes freezes on logo then restarts into stock recovery.
Click to expand...
Click to collapse
Well, only 2 more posts, and you can post in the actual ROM thread to ask for help. Maybe the ROM chef can help you more.
Yeah, thanks for all the help mate, i appreciate your time.
gsmxpert said:
Am sure you didnt search before posting but i recommend this
download this and extract, you get three files
load pda, modem and csc
also load pit in the pit tab, uncheck repartition and flash with odin 1.85
goodluck.
http://hotfile.com/dl/123612065/a85a23d/I9100JPKF3.rar.html
http://hotfile.com/dl/139350663/9ba2e55/u1_02_20110310_emmc_EXT4.pit.rar.html
---------- Post added at 04:41 PM ---------- Previous post was at 04:39 PM ----------
here is odin incase you are too lazy to search
http://www.4shared.com/rar/dHnCINEN/odin_185.html
put phone in download mode by pressing volume - +home+power
connect.
Click to expand...
Click to collapse
Thanks man found this thread and it solved my problem in minutes. Phone no longer has yellow triangle and is back to normal.
Sent from my GT-I9100 using xda premium
I have a rooted Australian Galaxy s iii i9300 running stock android 4.0.4 and Siyah Kernel V.1.5.3, both of which I flashed about 3 weeks ago.
My phone has been running perfectly, last night before going to bed I plugged my phone into the charger as usual. I didn't do anything out of the ordinary with it, I didn't alter any settings or install anything new and it has been weeks since I've flashed anything. I woke up this morning to see my phone stuck on the 'Galaxy S iii' logo screen as if it had automatically rebooted itself during the night and got stuck. I've tried removing the battery and turning it back on several times but it just keeps getting stuck on the logo screen. I can't enter clockwork recovery mod but I can still enter download mode.
Is my phone bricked?
How did this happen when I didn't even do anything?
What should I do?
Should I try re-flashing the stock ics rom?
Re-root
Try re-rooting it with Odin (from Download Mode), then you might be able to go into Recovery Mode.
Have you recently installed any app? Coz there must be a reason for this to happen.
If the above comment does not work, next step would be to order a jig to force it into download mode.
mylakhana said:
Try re-rooting it with Odin (from Download Mode), then you might be able to go into Recovery Mode.
Click to expand...
Click to collapse
I can't even get into normal recovery mode, so I'm not sure re-rooting will help (I'll still give it a try though). Assuming it does work, what should I do once I get into Clockwork recovery?
mylakhana said:
Have you recently installed any app? Coz there must be a reason for this to happen.
Click to expand...
Click to collapse
That's what makes this so weird, I haven't installed any new apps over the last couple of days, I did install a few updates from the market yesterday or the day before but I don't remember which ones.
NewAussiefromCanada said:
If the above comment does not work, next step would be to order a jig to force it into download mode.
Click to expand...
Click to collapse
I can already get into download mode.
okay, I just to tried to flash cf root and it failed. It says 'There is no PIT partition'.
Anyone? Sorry, I know it's rude to bump your own thread and it's not something I usually do but I'm really freaking out here.
did you try reflashing stock rom?
sree_rag said:
did you try reflashing stock rom?
Click to expand...
Click to collapse
Yes but it failed like cf_root did, I got the same 'There is no PIT partition' error.
tsymbo sure
kilgorcalrizian said:
Yes but it failed like cf_root did, I got the same 'There is no PIT partition' error.
Click to expand...
Click to collapse
Did you flash the Stock Rom via Odin with 1 part file? You should try it with 3 part File Stock Rom and flash via Odin.
DoppelgängerGER said:
Did you flash the Stock Rom via Odin with 1 part file? You should try it with 3 part File Stock Rom and flash via Odin.
Click to expand...
Click to collapse
Thanks for the reply. Where can I find the 3 part file version of the stock Rom? Can you point me in the direction of a tutorial for flashing 3 part files with Odin? I'm only familiar with flashing a single tar file.
Seems as if this becomes a common problem, since this is like the 1001st thread about a S3 shutting down while on charge and not being able to reboot.
This kinda scares me...
Sent from my GT-I9300 using xda premium
Where can I find a 3 part Rom? I've googled but I can't find one. How do I flash it once I do find it?
ch0ka said:
Seems as if this becomes a common problem, since this is like the 1001st thread about a S3 shutting down while on charge and not being able to reboot.
This kinda scares me...
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Really? I did a quick search before posting this, sorry for the repost. Did anyone come up with a solution in previous threads?
I've searched and searched but I still can't find the 3 file firmware. I don't even know what I'm looking for really. Can someone please link me to a 3 part Rom compatible with my phone?
While my search for similar problems before creating this thread yielded very few results, I have since found the other threads Ch0ka was referring to by searching 'There is no PIT partition'. It seems that if flashing a three part file and repartitioning with Odin doesn't work, the general consensus is that I'll have to send it to a service center for repair. Haven't I voided the warranty on my phone by rooting it? will they be able to tell I've rooted it or is it damaged beyond that point? I really can't afford to be paying for repairs right now.
I'm so upset, I still don't understand how my phone could just brick itself overnight! Could someone please give me some advice?
Did you overclock anything?
Sent from my GT-I9300
manemzjum said:
Did you overclock anything?
Sent from my GT-I9300
Click to expand...
Click to collapse
No.
You can find all the stock Samsung ROM here
http://www.sammobile.com/firmware/
What version of Odin are you using? Make sure you're using Odin v3.04(or above)
I have a quite similar problem. I thought it might be wise to post it here instead of making a new tread.
I in andvance apologise for my english.
Event that lead to my s3 constantly bootlooping
Entered Clockwork recovery mod.
Updated Kernel to Siyah from SD
Rebooted
Phone updated ( update i used to always click away, might be JB s3 update)
Now my phone boots, shows purple siyah picture, shows bootanimation, asks for simcard pin and reboots again.
this loop takes forever.
I cannot get into clockwork mod anymore.
I can get into download mode (down+home+power)
I am very scared that i ruined my phone :crying: :crying:
Is there hope that i can fix this? or like it is really low chance
rerooting didnt bring clockwork mod back.
installed clockwork mod via odin, but also didnt help.
I would really like to revert the (down+home+power) menu to pre root. because than factory reset is available.
is that possible? please help desperate person who is in need of working phone by tomorrow morning :crying: :crying:
---------- Post added at 03:21 AM ---------- Previous post was at 03:09 AM ----------
is there a way tto delete the siyah kernel through odin? or at least replace it
---------- Post added at 03:28 AM ---------- Previous post was at 03:21 AM ----------
something is finally happening. trying to put stock md5 file trough odin. there is definately a download bar appearing on the phone screen.
I'm just going crazy, and if my updates are anoying let me know. i just try not to think that i ruined my 2 weeks old phone :crying:
George1195 said:
I have a quite similar problem. I thought it might be wise to post it here instead of making a new tread.
I in andvance apologise for my english.
Event that lead to my s3 constantly bootlooping
Entered Clockwork recovery mod.
Updated Kernel to Siyah from SD
Rebooted
Phone updated ( update i used to always click away, might be JB s3 update)
Now my phone boots, shows purple siyah picture, shows bootanimation, asks for simcard pin and reboots again.
this loop takes forever.
I cannot get into clockwork mod anymore.
I can get into download mode (down+home+power)
I am very scared that i ruined my phone :crying: :crying:
Is there hope that i can fix this? or like it is really low chance
rerooting didnt bring clockwork mod back.
installed clockwork mod via odin, but also didnt help.
I would really like to revert the (down+home+power) menu to pre root. because than factory reset is available.
is that possible? please help desperate person who is in need of working phone by tomorrow morning :crying: :crying:
---------- Post added at 03:21 AM ---------- Previous post was at 03:09 AM ----------
is there a way tto delete the siyah kernel through odin? or at least replace it
---------- Post added at 03:28 AM ---------- Previous post was at 03:21 AM ----------
something is finally happening. trying to put stock md5 file trough odin. there is definately a download bar appearing on the phone screen.
I'm just going crazy, and if my updates are anoying let me know. i just try not to think that i ruined my 2 weeks old phone :crying:
Click to expand...
Click to collapse
try the factory reset your last attempt.Hope it helps.
Sorry to hear both of you having this problem.
---------- Post added at 11:31 AM ---------- Previous post was at 11:14 AM ----------
Maybe this link will help http://forum.xda-developers.com/showthread.php?t=1671969
Kremata said:
You can find all the stock Samsung ROM here
http://www.sammobile.com/firmware/
Click to expand...
Click to collapse
Thanks for replying. My problem is that I don't know what to look for. How do I know which one has 3 files? Which one do I need? Sorry, I know this seems like a stupid question but I've never used a 3 part Rom before, I have no idea what I'm doing. Isn't it really important to use the right PIT file?
George1195 said:
I have a quite similar problem.
Click to expand...
Click to collapse
Keep us posted George, sorry to hear you're dealing with this too. I hope you manage to fix it!
Ttblondey said:
try the factory reset your last attempt.Hope it helps.
Sorry to hear both of you having this problem.
---------- Post added at 11:31 AM ---------- Previous post was at 11:14 AM ----------
Maybe this link will help http://forum.xda-developers.com/showthread.php?t=1671969
Click to expand...
Click to collapse
I cannot reach the setting to do a factory reset. My UI doesnt start and the button combo doesnt take me to a menu were i can factory reset the device.
What other way is there, trough odin maybe??
Just bricked my phone, new to all this stuff. Trying to repair it with odin, no luck. can anyone hit me up on skype and help me out? skype = wakfuyap
I can get into download mode, but I can't boot the phone normally. Simply want to revert to stock and go from there. Tried numerous different md5 files through odin, they crash when I try to load them, usually while trying to write NAND? I would like some help over skype, I can pay you if you get my phone working and can walk me through it, thanks.
James McCann.
What kind of phone?
Verizon Samsung Galaxy s4
S4 sounds like a locked bootloader stock probably keep trying the cuamdl try nb1 I just flashed on a s4 about five months ago Odin NB1 twrootable
you might as well be speaking in a foreign language. I just want help fixing my phone via skype. $20 via paypal to first person to holler at me on skype and help me fix it. skype = wakfuyap have odin 3.10 already if that will be the method used. hope somebody hits me up soon.
http://galaxys4root.com/u-s-galaxy-s4-stock-firmwares-for-att-t-mobile-sprint-verizon-metropcs/
---------- Post added at 02:17 AM ---------- Previous post was at 02:12 AM ----------
1. Power off Samsung Galaxy S4.
2. Press and hold down Volume Up + Home + Power buttons at the same time.
3. Go and select factory and data reset.
4. Then press and hold Volume Down + Home + Power button at the same time.
5. Press Volume Up button when warning prompt.
6. Odin download mode will be loaded.
5. Connect USB cable to your phone.
7. At PC, extract firmware .tar (or .tar.md5) file that you downloaded to Firmware folder.
8. Then bring up Odin as administrator
9. Click on PDA. Select the .tar (or .tar.md5) at Firmware folder.
10. Click Start then.
11. Remove USB cable from your phone when you see green PASS!
That’s it. You have successfully installed stock official firmware on your Samsung Galaxy S4.
---------- Post added at 02:18 AM ---------- Previous post was at 02:17 AM ----------
You need NK1
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
I don't Skype but that's how to do it hope it helps
first steps aren't available to me, there are no options, it goes straight to the screen asking me if I want to do download mode by pressing volume up. I can get to download mode, when I try to load the md5 file via odin it fails every time, I have tried many different md5 files. some times it is an AUTH problem, sometimes NAND problem. Why is this so complicated? Why can't somebody just give me clear instructions that work? I can get to download mode, I can launch odin. I need a file that works and to know which boxes need to be checked.
I have done it did you download the Verizon nk1 file from the link in the post? That's where I got my files ......... Shizz its probably the version of Odin you are using try 1.85 I never have problems with that one but the others are sometimes hit and miss if you have the right files and its recognized by Odin then it has to be the Odin version you are using I have about seven different versions but I only use 1.85
---------- Post added at 03:44 AM ---------- Previous post was at 03:44 AM ----------
Boxes just leave the same don't check flash lock that's for sure
---------- Post added at 03:47 AM ---------- Previous post was at 03:44 AM ----------
If its in a tar.Md5 then it does not need to be extracted also
I have tried the older version of ODIN you recommended, 1.85 and the md5 file you gave me the link to. It doesn't work either, it will fail at some stage that says AUTH, which is what happens on the others, sometimes at the NAND part. fails very quickly, 3-4 seconds into it after I hit start. Anyone else have any advice? Is there another method besides ODIN because that seems like a bunch of nonsense to me, since I have tried about every version of ODIN and md5 file listed on these forums.
I have the same issue on my SCH-I545 that was running 5.1 Lollipop OF1. I flashed it back to OC1 and rooted the phone. I then flashed back to OF1 and everything was working perfect. My ultimate goal though was learn and to install custom roms but with the boot loader being locked on Lollipop you are limited to what you can install. So reading through forums I saw that there are a lot of people running @stang5litre custom rom. I found and followed the instructions after reading through almost the entire 300+ page thread. I did it exactly how it was posted but after the rom flashed and rebooted the phone would just hang on the custom boot screen. I waited like @stang5litre has said (for up to 15 min.) when it still didn't reload I pulled the battery and rebooted again. It still just hangs on the custom boot screen. I have re-flashed OF1 and OC1 with the same results.
Can I flash back to 4.4.2 like @Joker1716 is saying above? I thought once you have upgraded to Lollipop you can't revert back.
Any help would be greatly appreciated!
dhench66 said:
I have the same issue on my SCH-I545 that was running 5.1 Lollipop OF1. I flashed it back to OC1 and rooted the phone. I then flashed back to OF1 and everything was working perfect. My ultimate goal though was learn and to install custom roms but with the boot loader being locked on Lollipop you are limited to what you can install. So reading through forums I saw that there are a lot of people running @stang5litre custom rom. I found and followed the instructions after reading through almost the entire 300+ page thread. I did it exactly how it was posted but after the rom flashed and rebooted the phone would just hang on the custom boot screen. I waited like @stang5litre has said (for up to 15 min.) when it still didn't reload I pulled the battery and rebooted again. It still just hangs on the custom boot screen. I have re-flashed OF1 and OC1 with the same results.
Can I flash back to 4.4.2 like @Joker1716 is saying above? I thought once you have upgraded to Lollipop you can't revert back.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I bet FF moved wipe to at the end. Which is why your not booting. You have to set it twice with FF or it moves wipe to the end. This is a known bug with FF. Before you hit the bolt make sure the order is correct and you will boot up fine. Happy to help you
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
I bet FF moved wipe to at the end. Which is why your not booting. You have to set it twice with FF or it moves wipe to the end. This is a known bug with FF. Before you hit the bolt make sure the order is correct and you will boot up fine. Happy to help you
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
Thanks for the quick reply @stang5litre....I did move wipe back to the front as I read to do so in your thread. But now the phone will not get past the custom boot screen even after I've re-flashed the OF1 & OC1 files. Do I have any other options on fixing this phone? I don't have a problem buying a new one as I've had this for a while but I really hate to give up on this if there is away to get it back up and running.
dhench66 said:
Thanks for the quick reply @stang5litre....I did move wipe back to the front as I read to do so in your thread. But now the phone will not get past the custom boot screen even after I've re-flashed the OF1 & OC1 files. Do I have any other options on fixing this phone? I don't have a problem buying a new one as I've had this for a while but I really hate to give up on this if there is away to get it back up and running.
Click to expand...
Click to collapse
Your not hard bricked so you can definitely get it back so don't worry about that[emoji106] . At the mall with Santa . Soon as I get back I'll get you back going.
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
Your not hard bricked so you can definitely get it back so don't worry about that[emoji106] . At the mall with Santa . Soon as I get back I'll get you back going.
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
Awesome Thanks! Tell Santa I said hi:angel:
dhench66 said:
Awesome Thanks! Tell Santa I said hi:angel:
Click to expand...
Click to collapse
Sorry took so long had to get all the family stuff done. So where are you at with the phone atm? So I can tell you the right files . Also what base were you OF1? Thanks
Ps Santa says wazzzz up!!!![emoji318] [emoji320]
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
Sorry took so long had to get all the family stuff done. So where are you at with the phone atm? So I can tell you the right files . Also what base were you OF1? Thanks
Ps Santa says wazzzz up!!!![emoji318] [emoji320]
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
I have similar issuse. I'm on OF1.
Rooted then tried to flash newest TWRP via the app. Wont reboot or go into recovery. Can get it to reboot unless I odin a OC1 or OF1 kernel.
Best way to ODIN back to OF1 or an earlier firmware?
Hymizzle said:
I have similar issuse. I'm on OF1.
Rooted then tried to flash newest TWRP via the app. Wont reboot or go into recovery. Can get it to reboot unless I odin a OC1 or OF1 kernel.
Best way to ODIN back to OF1 or an earlier firmware?
Click to expand...
Click to collapse
What were you originally on(base)? If your not mdk then you cantt use TWRP.
You would need to Odin back to what you came from re root and then go through the the process. But I need to know what base you were on when you rooted.
Thanks
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
What were you originally on(base)? If your not mdk then you cantt use TWRP.
You would need to Odin back to what you came from re root and then go through the the process. But I need to know what base you were on when you rooted.
Thanks
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
I was OF1 base. Cant find an ODIN for OF1. It wont factory reset in phone.
Hymizzle said:
I was OF1 base. Cant find an ODIN for OF1. It wont factory reset in phone.
Click to expand...
Click to collapse
Can you get into download mode?
You have to use Flash Fire
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
Can you get into download mode?
You have to use Flash Fire
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
I can get in download mode. I have Flashfire installed. This is what I should try?:
http://forum.xda-developers.com/gal...1-keeproot-t3182544/post62413212#post62413212
I've got my old Galaxy s2 and decided to root it, cause if I brick it, It wouldn't matter much. After using Odin to put a kernal on it, it only goes to the startup screen with the warning triangle. I can get it to the CW recovery screen, but it doesn't do anything after making a selection. I'm now stuck and not sure what to do. I'm super new at this, if not obvious.
Odin flash your stock firmware and start again......
http://i.imgur.com/rVnFwJM.jpg
Where would I that?
You get the firmware from sammobile dot com Or samsung updates dot com.
Odin can be found on xda and the Samsung USB drivers can be found on here too.
You can get Odin and the drivers here.....
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Most of the advice in that thread can be followed even if you don't have any problems with odin flashing.
http://i.imgur.com/rVnFwJM.jpg
Took me a little while to finally find a copy of the stock firmware. Flashed it, and now the phone boots up and says,
'gaudiuscc_bootimage.jpg' draw failed
If you flashed 4.0.4 don't try this, but have you tried booting into recovery to do the wipes?
http://i.imgur.com/rVnFwJM.jpg
It has Clock Work on it, but when I make a selection on the recovery screen it doesn't do anything. It goes to a black screen with the CW logo, where the new menu should be. If I hit the power button again it takes me back to the main menu. I can't even shutdown the phone from the recovery screen.
If you flashed a stock firmware then it won't have ClockworkMod recovery on it....
It should be Android 3e recovery.
http://i.imgur.com/rVnFwJM.jpg
I don't know why I thought that it still had Clock Work on it. I've got it to the recovery screen, and it won't let me make a selection. It makes it seem like the power button dosen't work, but if it didn't there would be no way to turn it on.
I don't know why that's happening either, but as a workaround you could try installing the correct PhilZ recovery....They come as zip or tar files....so you can use the tar file with odin.
PhilZ is a touch based recovery, so you don't need to rely on using the buttons.
http://i.imgur.com/rVnFwJM.jpg
anchovey707 said:
I don't know why I thought that it still had Clock Work on it. I've got it to the recovery screen, and it won't let me make a selection. It makes it seem like the power button dosen't work, but if it didn't there would be no way to turn it on.
Click to expand...
Click to collapse
Flash the full stock firmware of your Galaxy S2. Make sure that you wipe the data too. You can get the stock firmware from Sammobile.com. Make sure that you flash the stock kernel too.
---------- Post added at 08:14 AM ---------- Previous post was at 08:13 AM ----------
Make sure to flash 4.1.2 too.
Sent from my Che2-L11 using XDA-Developers mobile app
GhostKiller19 said:
Flash the full stock firmware of your Galaxy S2. Make sure that you wipe the data too. You can get the stock firmware from Sammobile.com. Make sure that you flash the stock kernel too.
---------- Post added at 08:14 AM ---------- Previous post was at 08:13 AM ----------
Make sure to flash 4.1.2 too.
Sent from my Che2-L11 using XDA-Developers mobile app
Click to expand...
Click to collapse
I already advised the OP to do just that and he's still having problems.....
http://i.imgur.com/rVnFwJM.jpg
Alright, so now the recovery works, even if it wasn't touch enabled. So now I think I'm at the point at which I first tried to root it a while back. I think I installed some wrong firmware. It's the Alltel model (and maybe also the US cellular model), but the AT&T intro plays then freezes. Can I just install a different ROM on it?
What is your Model Number? GT-I9100,GT-I9100G, or what?
Sent from my Che2-L11 using XDA-Developers mobile app
GhostKiller19 said:
What is your Model Number? GT-I9100,GT-I9100G, or what?
Sent from my Che2-L11 using XDA-Developers mobile app
Click to expand...
Click to collapse
SCH-R760
Then you should flash the firmware that is only for that model number.
Sent from my unknown using XDA-Developers mobile app
I haven't been able to find it anywhere. Every download link is dead or just not there anymore.
And would I flash it the same way I have with the recovery stuff?
Hmmm dead download links for the Galaxy S2? Sorry but I can't help you if there is no more download link for your stock firmware.
Sent from my unknown using XDA-Developers mobile app
anchovey707 said:
I haven't been able to find it anywhere. Every download link is dead or just not there anymore.
And would I flash it the same way I have with the recovery stuff?
Click to expand...
Click to collapse
anchovey707
Have you fixed it??
If not have a read of this and see if it helps:- Go to Galaxy SII General forum Find This:- [GUIDE] Fix an unflashable or soft bricked GSII (I9100G/M/P/T VERSION INCLUDED) By Phistachio.
I could not find an exact match of my phone for firmware and in the end went for the country /region and local service provider. I guess I got lucky! Once you get JB or ICS running you can load a recovery like TWRP and then "Progress" to your choice of custom ROMs.
Hi,
I flashed PIe beta and then downgraded to stock rom but now i lost the IMIE and Basement.. and there is no network in phone.. please help how i can fix this..
thank you..
stephenlb4u said:
Hi,
I flashed PIe beta and then downgraded to stock rom but now i lost the IMIE and Basement.. and there is no network in phone.. please help how i can fix this..
thank you..
Click to expand...
Click to collapse
You will need to flash full Stock Firmware from Odin and that should do the trick
Thank you.. fixed it
Same issue
Hello,
I am having a same issue and had no luck flashing back to the unlocked version.
I previously had unlocked version purchased from Samsung.
To test pie, I flashed to T mobile version, and updated to pie. My current service provider is Verizon.
Could you please help me to go back to unlocked version??
stephenlb4u said:
Thank you.. fixed it
Click to expand...
Click to collapse
Could you please help me how you fixed it? I downloaded arg8 from samfirm, and it still does the same. Please help. I am stuck with CRI6 right now.
jong707 said:
Could you please help me how you fixed it? I downloaded arg8 from samfirm, and it still does the same. Please help. I am stuck with CRI6 right now.
Click to expand...
Click to collapse
You would need to set Odin not to auto reboot, you would need to flash ARG8 after it says "Pass" you would need to manually reboot the device into recovery mode and flash one of the Oreo leaks
kevindevonwilliams said:
You would need to set Odin not to auto reboot, you would need to flash ARG8 after it says "Pass" you would need to manually reboot the device into recovery mode and flash one of the Oreo leaks
Click to expand...
Click to collapse
use 4 odin files that you usually would do? BL, AP, CP, CSC (not home one),
then manually reboots by pressing vol down and power key
when it reboots, vol up, bixby, and power then install update from SD card.
Correct? Do i need to do the entire process again if the phone reboots? (showing Start)
jong707 said:
use 4 odin files that you usually would do? BL, AP, CP, CSC (not home one),
then manually reboots by pressing vol down and power key
when it reboots, vol up, bixby, and power then install update from SD card.
Correct? Do i need to do the entire process again if the phone reboots? (showing Start)
Click to expand...
Click to collapse
Yes the procedure is correct, once done in a timely manner..
What error are you facing when trying to flash an Oreo OTA file via Recovery
I dont get an error message. I still get unknown issue even after doing that.
---------- Post added at 10:44 PM ---------- Previous post was at 10:36 PM ----------
kevindevonwilliams said:
Yes the procedure is correct, once done in a timely manner..
What error are you facing when trying to flash an Oreo OTA file via Recovery
Click to expand...
Click to collapse
Still unknown IMEI and baseband. Do i have to use odin 13.1 or the patched one 3B?
jong707 said:
I dont get an error message. I still get unknown issue even after doing that.
---------- Post added at 10:44 PM ---------- Previous post was at 10:36 PM ----------
Still unknown IMEI and baseband. Do i have to use odin 13.1 or the patched one 3B?
Click to expand...
Click to collapse
Patched Odin, what does your software version says in settings?
Baseband: G965usqu3cri6
service provider sw ver. Saomc_sm-g965u_oyn_vzw_pp_0013
this is what worked for me,
1. install G965USQS3ARG8_TMB using odin
2. install Pie update.zip file
3. you should get network now ( hope it works for you too)
4. Flash G965USQS3ARG8 again.. and you should be all set
when you update to Pie, use CR5 not the CR6