Hi,
I flashed PIe beta and then downgraded to stock rom but now i lost the IMIE and Basement.. and there is no network in phone.. please help how i can fix this..
thank you..
stephenlb4u said:
Hi,
I flashed PIe beta and then downgraded to stock rom but now i lost the IMIE and Basement.. and there is no network in phone.. please help how i can fix this..
thank you..
Click to expand...
Click to collapse
You will need to flash full Stock Firmware from Odin and that should do the trick
Thank you.. fixed it
Same issue
Hello,
I am having a same issue and had no luck flashing back to the unlocked version.
I previously had unlocked version purchased from Samsung.
To test pie, I flashed to T mobile version, and updated to pie. My current service provider is Verizon.
Could you please help me to go back to unlocked version??
stephenlb4u said:
Thank you.. fixed it
Click to expand...
Click to collapse
Could you please help me how you fixed it? I downloaded arg8 from samfirm, and it still does the same. Please help. I am stuck with CRI6 right now.
jong707 said:
Could you please help me how you fixed it? I downloaded arg8 from samfirm, and it still does the same. Please help. I am stuck with CRI6 right now.
Click to expand...
Click to collapse
You would need to set Odin not to auto reboot, you would need to flash ARG8 after it says "Pass" you would need to manually reboot the device into recovery mode and flash one of the Oreo leaks
kevindevonwilliams said:
You would need to set Odin not to auto reboot, you would need to flash ARG8 after it says "Pass" you would need to manually reboot the device into recovery mode and flash one of the Oreo leaks
Click to expand...
Click to collapse
use 4 odin files that you usually would do? BL, AP, CP, CSC (not home one),
then manually reboots by pressing vol down and power key
when it reboots, vol up, bixby, and power then install update from SD card.
Correct? Do i need to do the entire process again if the phone reboots? (showing Start)
jong707 said:
use 4 odin files that you usually would do? BL, AP, CP, CSC (not home one),
then manually reboots by pressing vol down and power key
when it reboots, vol up, bixby, and power then install update from SD card.
Correct? Do i need to do the entire process again if the phone reboots? (showing Start)
Click to expand...
Click to collapse
Yes the procedure is correct, once done in a timely manner..
What error are you facing when trying to flash an Oreo OTA file via Recovery
I dont get an error message. I still get unknown issue even after doing that.
---------- Post added at 10:44 PM ---------- Previous post was at 10:36 PM ----------
kevindevonwilliams said:
Yes the procedure is correct, once done in a timely manner..
What error are you facing when trying to flash an Oreo OTA file via Recovery
Click to expand...
Click to collapse
Still unknown IMEI and baseband. Do i have to use odin 13.1 or the patched one 3B?
jong707 said:
I dont get an error message. I still get unknown issue even after doing that.
---------- Post added at 10:44 PM ---------- Previous post was at 10:36 PM ----------
Still unknown IMEI and baseband. Do i have to use odin 13.1 or the patched one 3B?
Click to expand...
Click to collapse
Patched Odin, what does your software version says in settings?
Baseband: G965usqu3cri6
service provider sw ver. Saomc_sm-g965u_oyn_vzw_pp_0013
this is what worked for me,
1. install G965USQS3ARG8_TMB using odin
2. install Pie update.zip file
3. you should get network now ( hope it works for you too)
4. Flash G965USQS3ARG8 again.. and you should be all set
when you update to Pie, use CR5 not the CR6
Related
Hii guys,
I was updating my phone from Gb to ics firmware update. The upgrade process got stuck at 70% while downloading and then my net got disconnected Now i turn on my phone i get a sign of a mobile phone connected to a PC some thing like Emergency firmware recovery.
:crying: How to get my phone working? Please HELP
undisputedpro said:
Hii guys,
I was updating my phone from Gb to ics firmware update. The upgrade process got stuck at 70% while downloading and then my net got disconnected Now i turn on my phone i get a sign of a mobile phone connected to a PC some thing like Emergency firmware recovery.
:crying: How to get my phone working? Please HELP
Click to expand...
Click to collapse
were you updating via kies?
can you get to download mode?
If yes to the above, you will need to flash your device.
Did you make a back up before you started the update?
If not, here's some guides that can help you thru the process of getting back to your feet:
http://forum.xda-developers.com/showthread.php?t=1826497
And please...read and re-read before you do anything
Yes i can get to download mode
yes i tried flashing ics firmware but its not working
'mobile phone connecting to a pc' symbol is forced download mode, I.E you need to flash something (a rom) to get the phone to boot.
You need to find a suitable stock rom & flash it in Odin. Gaston gave you good advice. You've "tried flashing ICS firmware & it's not working"; we're not psychic & not there with you looking over your shoulder so how would we know why it's not working.
As Gaston eluded to, you haven't exactly gone out of your way to give us details on exactly what you've done/flashed so it's a bit hard for anyone here to give you anything but generic advice ('flash a stock rom').
So...I'll do exactly that. Download a stock rom from Samfirmware or AndroidFirmwares.net. Flash it in Odin. If you get bootloop, boot into recovery & do a factory reset.
"Let the flashs begins"
---------- Post added at 02:02 PM ---------- Previous post was at 01:56 PM ----------
MistahBungle said:
You need to find a suitable stock rom & flash it in Odin. Gaston gave you good advice. You've "tried flashing ICS firmware & it's not working"; we're not psychic & not there with you looking over your shoulder so how would we know why it's not working.
Click to expand...
Click to collapse
wow wow....I am a psych....ask me when JB update will start rolling, I'd answer something like "Ask the Koreans, they are from the future"
I know rooting is a risk but never had this issue with the Galaxy S3.
I rooted the Galaxy S6 Edge using Kinguser in order to remove carrier crapware. Post root, Settings->About Device->Status->Device Status = "Custom".
Attempting an OTA update, the phone reports "The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your PC or visit a customer service centre".
Attempting update from PC using Smart Switch, error message is "ErrorCode=5,ErrorMessage=The operation completed successfully." Despite the content of the message, the phone is not updated.
What are the options to get the update? I have invested a lot of time in organizing and setting up apps so I would like to avoid spending a day doing a factory reset. I have Galaxy S6 Edge 128 GB from Rogers Wireless in Canada.
DouginCalgary said:
I know rooting is a risk but never had this issue with the Galaxy S3.
I rooted the Galaxy S6 Edge using Kinguser in order to remove carrier crapware. Post root, Settings->About Device->Status->Device Status = "Custom".
Attempting an OTA update, the phone reports "The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your PC or visit a customer service centre".
Attempting update from PC using Smart Switch, error message is "ErrorCode=5,ErrorMessage=The operation completed successfully." Despite the content of the message, the phone is not updated.
What are the options to get the update? I have invested a lot of time in organizing and setting up apps so I would like to avoid spending a day doing a factory reset. I have Galaxy S6 Edge 128 GB from Rogers Wireless in Canada.
Click to expand...
Click to collapse
just download your firmware and flash it with Odin
Won't that overwrite the settings and content on the phone? I guess I could back it up with Smart Switch first.
I have similar problem with my S6 Edge 64 GB. I rooted it with "CF Autoroot" and it went fine but then the storage of my phone dropped from 64GB to 16GB. Also when I try to run my banking apps they didn't work. I guess because the device was rooted. To get my storage back to 64 GB I flashed phone with 5.1.1 as 6.0.1 didn't worked. Now I am running 5.1.1 with Custom status with full 64GB storage. I tried to update the software through OTA but get message the device is modified and can't be updated. Also with smart switch, it says SM-G925F is not supported
I also tried to flash stock firmware O2U-G925FXXU1AOCV-20150410182552.zip but it keeps getting failed.
Can you please advise how can I get back to official status with 6.0.1
You can go back to official status, you tripped Knox and it blew the Efuse on your device which you can't repair. Best bet is to use odin and install original firmware back to the device, put the file in AP and flash it. It should take 5 min to complete. If you've already done it and come up with errors what are they? Need more info dude to help you.
Model number:
Android version:
What have you tried?
What errors are you coming across
Valkiry said:
You can go back to official status, you tripped Knox and it blew the Efuse on your device which you can't repair. Best bet is to use odin and install original firmware back to the device, put the file in AP and flash it. It should take 5 min to complete. If you've already done it and come up with errors what are they? Need more info dude to help you.
Model number:
Android version:
What have you tried?
What errors are you coming across
Click to expand...
Click to collapse
Model number: SM-G925F
Android version: 5.1.1
I tried uploading stock firmware downloaded from androidrootz/sammobile with ODIN but it keeps getting failed. No matter what port I used, its not working.
No errors, just it keeps getting failed
http://www.sammobile.com/firmwares/database/SM-G925F/
Try install the marshmallow update.
If you don't want to try, go into recovery and factory reset and boot up fully and go through the setup and try flash again with ODIN.
If ODIN still fails try a different usb and USB port. It can be picky sometimes.
Also you could try and push the Firmware over with ADB. (I don't know how to use ADB so just Google instructions.)
At which point is it getting failed? Example... "hidden.img fail" a screen shot of odin will help mate?
I have tried with three different ports and i'm using genuine samsung data cable with lates odin software.
Due to less posts than 10 i am unable to attach screenshots.
after hidden.img it gets FAIL
hidden.img fail means you need to flash the PIT file.
Best thing would be to look on sam mobile and download and flash 6.0.1 FW.
http://www.sammobile.com/firmwares/download/66479/G925FXXS3DPB1_G925FOXA3DPB1_XEU/
This is the one I had to flash which didn't need pit to be flashed seperately which got me up and running easily. Just backup your stuff.
callumbr1 said:
hidden.img fail means you need to flash the PIT file.
Best thing would be to look on sam mobile and download and flash 6.0.1 FW.
http://www.sammobile.com/firmwares/download/66479/G925FXXS3DPB1_G925FOXA3DPB1_XEU/
This is the one I had to flash which didn't need pit to be flashed seperately which got me up and running easily. Just backup your stuff.
Click to expand...
Click to collapse
I tried this one: G925FXXU3DPBN/G925FTEF3DPB2
Now downloading the one you mentioned, I think I tried it as well but same error. Give it another shot, fingers crossed it may work now
DevilzShadow said:
I tried this one: G925FXXU3DPBN/G925FTEF3DPB2
Now downloading the one you mentioned, I think I tried it as well but same error. Give it another shot, fingers crossed it may work now
Click to expand...
Click to collapse
If not try this one this is what I'm running now.
This one will definitely work. I was getting hidden.img fail but this one flashed no problem. Make sure you have odin 3.10
http://samsung-updates.com/details/61435/Galaxy_S6_Edge/SM-G925F/XEU/G925FXXU3DPAD.html
---------- Post added at 07:14 PM ---------- Previous post was at 07:09 PM ----------
Let me know how you get on.
callumbr1 said:
If not try this one this is what I'm running now.
This one will definitely work. I was getting hidden.img fail but this one flashed no problem. Make sure you have odin 3.10
http://samsung-updates.com/details/61435/Galaxy_S6_Edge/SM-G925F/XEU/G925FXXU3DPAD.html
---------- Post added at 07:14 PM ---------- Previous post was at 07:09 PM ----------
Let me know how you get on.
Click to expand...
Click to collapse
Is there anyway to speed up the download from this website, right now it says 8 hours to complete. I am on 50Mb fibre optic
I'm afraid not unless you want to pay for it. It usually takes around 1-2 hours I think.
---------- Post added at 07:28 PM ---------- Previous post was at 07:20 PM ----------
https://drive.google.com/folderview?id=0B40ItdHKfkyQWmE5bTNiVzN3bTg&usp=drive_web#list
Here it is on Google drive from samfirm.net.
This will download a lot faster
callumbr1 said:
I'm afraid not unless you want to pay for it. It usually takes around 1-2 hours I think.
---------- Post added at 07:28 PM ---------- Previous post was at 07:20 PM ----------
https://drive.google.com/folderview?id=0B40ItdHKfkyQWmE5bTNiVzN3bTg&usp=drive_web#list
Here it is on Google drive from samfirm.net.
This will download a lot faster
Click to expand...
Click to collapse
This got passed. Thankyou very much mate
DevilzShadow said:
This got passed. Thankyou very much mate
Click to expand...
Click to collapse
Not a problem mate glad I could help!
Everything working?
callumbr1 said:
Not a problem mate glad I could help!
Everything working?
Click to expand...
Click to collapse
Yes everything working so far, storage is full and device status is official too.
will report back if there are any issues
Brilliant mate ? glad I could help. Leave a thanks please buddy
callumbr1 said:
Brilliant mate ? glad I could help. Leave a thanks please buddy
Click to expand...
Click to collapse
Already done ??
i have a note edge from sprint, it is a friend of mines. Who by the way didnt listen to me and let me do it to begin with.
the phone when powered on is stuck at
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
He did not get to install TWRP on the device.
Can anyone point me in the right direction of how maybe i can get this to work. i have tried the Kies software but it keeps saying that it is not connected.
Also, i have not seen anywhere that uses Odin, is this because of the Sprint version.
primus123 said:
Also, i have not seen anywhere that uses Odin, is this because of the Sprint version.
Click to expand...
Click to collapse
What does this mean? You can use Odin for basically everything on this phone.
Well, you can't use it to make that worthless edge screen become something of value. You can't do that with Odin.
But Odin will do what you need. Power button, home button, and volume up button, all pushed at the same time, will give you the option to put the phone into Download mode and you can go Odin from there.
primus123 said:
i have a note edge from sprint, it is a friend of mines. Who by the way didnt listen to me and let me do it to begin with.
the phone when powered on is stuck at
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
He did not get to install TWRP on the device.
Can anyone point me in the right direction of how maybe i can get this to work. i have tried the Kies software but it keeps saying that it is not connected.
Also, i have not seen anywhere that uses Odin, is this because of the Sprint version.
Click to expand...
Click to collapse
Had similar issue, with the Edge in this situation. There is no obvious "download" screen when this happens because all you will get is that message.
1 Ignore Kies, wont help you
2. download the stock firmware from this thread: http://forum.xda-developers.com/not...alaxy-note-edge-stock-5-1-1-firmware-t3162245 (and thank the OP for posting it!)
3.Get Odin if dont have it already.
4. get phone to where it says "try again" and hook to computer
5. Flash the stock Rom via oden. Once you hit start in Odin you will, hopefully, see the download happen on the edge screen
I am assuming you know how to work Odin, if not, check out the several walk-throughs. The big thing is that, in this situation, error message screen IS the download screen at that point.
midmofan said:
Had similar issue, with the Edge in this situation. There is no obvious "download" screen when this happens because all you will get is that message.
1 Ignore Kies, wont help you
2. download the stock firmware from this thread: http://forum.xda-developers.com/not...alaxy-note-edge-stock-5-1-1-firmware-t3162245 (and thank the OP for posting it!)
3.Get Odin if dont have it already.
4. get phone to where it says "try again" and hook to computer
5. Flash the stock Rom via oden. Once you hit start in Odin you will, hopefully, see the download happen on the edge screen
I am assuming you know how to work Odin, if not, check out the several walk-throughs. The big thing is that, in this situation, error message screen IS the download screen at that point.
Click to expand...
Click to collapse
I downloaded the firmware but I'm not quite sure where to place the firmware under. There are several spots such as CP, CSC, BL, and AP.
Also, What do you mean by flashing the stock? Thank you for your time to read this. ;3
You can still flash from that screen. It's still download mode
Sent from my SM-N915P using Tapatalk
---------- Post added at 09:17 PM ---------- Previous post was at 09:17 PM ----------
And place the .tar under AP
Sent from my SM-N915P using Tapatalk
jbrown419 said:
You can still flash from that screen. It's still download mode
Sent from my SM-N915P using Tapatalk
---------- Post added at 09:17 PM ---------- Previous post was at 09:17 PM ----------
And place the .tar under AP
Sent from my SM-N915P using Tapatalk
Click to expand...
Click to collapse
I'm a huge noobie with this, but what is the difference between a T-Lock and a Flash Lock? Also, there isn't anything to check besides the default and the flash options right? Thank you, my root didn't go all the way thru so I'm trying to revert it to the un-rooted version.
[Edit]
So, I put the file in the AP area and started it. Then I get a red button that says "fail". I'm using the model and service provider but I'm not sure whats wrong, The only thing that I think could be not allowing me to unroot my phone is the flash lock, unless, I need more files for the Bl, Cp, CSC..
I've got my old Galaxy s2 and decided to root it, cause if I brick it, It wouldn't matter much. After using Odin to put a kernal on it, it only goes to the startup screen with the warning triangle. I can get it to the CW recovery screen, but it doesn't do anything after making a selection. I'm now stuck and not sure what to do. I'm super new at this, if not obvious.
Odin flash your stock firmware and start again......
http://i.imgur.com/rVnFwJM.jpg
Where would I that?
You get the firmware from sammobile dot com Or samsung updates dot com.
Odin can be found on xda and the Samsung USB drivers can be found on here too.
You can get Odin and the drivers here.....
http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Most of the advice in that thread can be followed even if you don't have any problems with odin flashing.
http://i.imgur.com/rVnFwJM.jpg
Took me a little while to finally find a copy of the stock firmware. Flashed it, and now the phone boots up and says,
'gaudiuscc_bootimage.jpg' draw failed
If you flashed 4.0.4 don't try this, but have you tried booting into recovery to do the wipes?
http://i.imgur.com/rVnFwJM.jpg
It has Clock Work on it, but when I make a selection on the recovery screen it doesn't do anything. It goes to a black screen with the CW logo, where the new menu should be. If I hit the power button again it takes me back to the main menu. I can't even shutdown the phone from the recovery screen.
If you flashed a stock firmware then it won't have ClockworkMod recovery on it....
It should be Android 3e recovery.
http://i.imgur.com/rVnFwJM.jpg
I don't know why I thought that it still had Clock Work on it. I've got it to the recovery screen, and it won't let me make a selection. It makes it seem like the power button dosen't work, but if it didn't there would be no way to turn it on.
I don't know why that's happening either, but as a workaround you could try installing the correct PhilZ recovery....They come as zip or tar files....so you can use the tar file with odin.
PhilZ is a touch based recovery, so you don't need to rely on using the buttons.
http://i.imgur.com/rVnFwJM.jpg
anchovey707 said:
I don't know why I thought that it still had Clock Work on it. I've got it to the recovery screen, and it won't let me make a selection. It makes it seem like the power button dosen't work, but if it didn't there would be no way to turn it on.
Click to expand...
Click to collapse
Flash the full stock firmware of your Galaxy S2. Make sure that you wipe the data too. You can get the stock firmware from Sammobile.com. Make sure that you flash the stock kernel too.
---------- Post added at 08:14 AM ---------- Previous post was at 08:13 AM ----------
Make sure to flash 4.1.2 too.
Sent from my Che2-L11 using XDA-Developers mobile app
GhostKiller19 said:
Flash the full stock firmware of your Galaxy S2. Make sure that you wipe the data too. You can get the stock firmware from Sammobile.com. Make sure that you flash the stock kernel too.
---------- Post added at 08:14 AM ---------- Previous post was at 08:13 AM ----------
Make sure to flash 4.1.2 too.
Sent from my Che2-L11 using XDA-Developers mobile app
Click to expand...
Click to collapse
I already advised the OP to do just that and he's still having problems.....
http://i.imgur.com/rVnFwJM.jpg
Alright, so now the recovery works, even if it wasn't touch enabled. So now I think I'm at the point at which I first tried to root it a while back. I think I installed some wrong firmware. It's the Alltel model (and maybe also the US cellular model), but the AT&T intro plays then freezes. Can I just install a different ROM on it?
What is your Model Number? GT-I9100,GT-I9100G, or what?
Sent from my Che2-L11 using XDA-Developers mobile app
GhostKiller19 said:
What is your Model Number? GT-I9100,GT-I9100G, or what?
Sent from my Che2-L11 using XDA-Developers mobile app
Click to expand...
Click to collapse
SCH-R760
Then you should flash the firmware that is only for that model number.
Sent from my unknown using XDA-Developers mobile app
I haven't been able to find it anywhere. Every download link is dead or just not there anymore.
And would I flash it the same way I have with the recovery stuff?
Hmmm dead download links for the Galaxy S2? Sorry but I can't help you if there is no more download link for your stock firmware.
Sent from my unknown using XDA-Developers mobile app
anchovey707 said:
I haven't been able to find it anywhere. Every download link is dead or just not there anymore.
And would I flash it the same way I have with the recovery stuff?
Click to expand...
Click to collapse
anchovey707
Have you fixed it??
If not have a read of this and see if it helps:- Go to Galaxy SII General forum Find This:- [GUIDE] Fix an unflashable or soft bricked GSII (I9100G/M/P/T VERSION INCLUDED) By Phistachio.
I could not find an exact match of my phone for firmware and in the end went for the country /region and local service provider. I guess I got lucky! Once you get JB or ICS running you can load a recovery like TWRP and then "Progress" to your choice of custom ROMs.
For Samsung Galaxy Note Edge SM-N915P
Build on the latest stock ROM
Stock Deodex - No Root - No Knox - Debloat
ROM Based on
Model: SM-N915P (Snapdragon)
PDA Version N915PVPU4DPD1
Build Date 01.04.2016
Changelist 7697088
OS Marshmallow - Version 6.0.1
[FONT="]DOWNLOAD LINK [/FONT]
[FONT="]Install from [FONT="]TW[FONT="]RP (full wipe are recom)[/FONT][/FONT][/FONT]
N9150BPE1-Binh24ROM.zip 1.4 GB
[FONT="][FONT="][FONT="][FONT="]INSTALL FROM ODIN[/FONT][/FONT][/FONT][/FONT]
KERNEL MODEM 6.0.1
SBOOT-BootLoader 6.0.1
[FONT="]Video Preview 5.1.1:[/FONT]
At work right now, will check it out once I get home. Thanks.
Just what i was looking for.
Cant get linked
Ickyz said:
Cant get linked
Click to expand...
Click to collapse
Uploaded
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Havnt gotten to try it
Tried Rom & Flashed Modem but couldn't get SBOOT, 2 Odin , Kept gettin No Service
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
elfeo0 said:
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
Click to expand...
Click to collapse
Odin sboot+ kernel modem first then Rom
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
I did that first, and it did not work, i did that second and it did not work. I back up my EFS and Modem and flash that too and it did not work. ( i did not made a back up before) but now i do. I will make another back up sonce just got my phone set up again, and will try it again and will post in a hour or so after im done.
I will back up my current phone before trying this.
Steps
1. Odin sboot file. And reboot.
2. Odin Modem file. And reboot.
3. Twrp , clean install of yoir rom.
4. If it works , post to this tread.
5. If it not works, flash back up and post to this tread.
Did not work
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
1. Odin SBOOT-BootLoader 6.0.1
2. Odin KERNEL MODEM 6.0.1
3. Screen shot of phone info settings after I Odin Sboot and Kernel
3. Flash N9150BPE1-Binh24ROM.zip
Took 15 minutes on the LTE Sprint boot screen.
Took 3 to 5 minutes on the Preparing phone set up screen
Was not able to connect to Wi-Fi, and no phone signal, and Screen shot of phone settings after phone set up.
One thing i forgot to mention is that after all its set up i get a pop op aboit sd card being corrupt and to tap it to fix it/format it.
Do you want me to flash or Odin something before I put my back up, as my phone it only good for not being a phone right now?
Update. Now running my back up as i was not able to get a respond and i needed my phone. Thanks, will keep reading this tread to see what happens. Off to work now.
dinaps86 said:
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Click to expand...
Click to collapse
Dinaps,
Did you get this up & going w| Service?
---------- Post added at 01:47 PM ---------- Previous post was at 01:46 PM ----------
How y'all Odin'ing Sboot?
I cant even get odin to find the file
---------- Post added at 02:24 PM ---------- Previous post was at 01:47 PM ----------
Soon as I can im Ditching this PHONE
Tbh I don't remember, it did boot, ik my WiFi was shot I pretty much booted it and than flashed freeza kernel which didn't boot sorry man
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
?
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
The LTE Sprint boot screen takes about 10 to 15 minutes.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Try flash stock Firmware first then odin TWRP to intall this ROM
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Ickyz said:
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Click to expand...
Click to collapse
I have stated this problem. But the OP has not answered on what the problem would be and how ro fix it or what to try. See the screenshots i posted, no baseband. I get no service, no WiFi, it does not work. It allso does not reads the sd card.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
goxthak0 said:
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
Click to expand...
Click to collapse
I flashed it as a Zip in Odin, Kernel & SBOOT but had no luck