Just bricked my phone, new to all this stuff. Trying to repair it with odin, no luck. can anyone hit me up on skype and help me out? skype = wakfuyap
I can get into download mode, but I can't boot the phone normally. Simply want to revert to stock and go from there. Tried numerous different md5 files through odin, they crash when I try to load them, usually while trying to write NAND? I would like some help over skype, I can pay you if you get my phone working and can walk me through it, thanks.
James McCann.
What kind of phone?
Verizon Samsung Galaxy s4
S4 sounds like a locked bootloader stock probably keep trying the cuamdl try nb1 I just flashed on a s4 about five months ago Odin NB1 twrootable
you might as well be speaking in a foreign language. I just want help fixing my phone via skype. $20 via paypal to first person to holler at me on skype and help me fix it. skype = wakfuyap have odin 3.10 already if that will be the method used. hope somebody hits me up soon.
http://galaxys4root.com/u-s-galaxy-s4-stock-firmwares-for-att-t-mobile-sprint-verizon-metropcs/
---------- Post added at 02:17 AM ---------- Previous post was at 02:12 AM ----------
1. Power off Samsung Galaxy S4.
2. Press and hold down Volume Up + Home + Power buttons at the same time.
3. Go and select factory and data reset.
4. Then press and hold Volume Down + Home + Power button at the same time.
5. Press Volume Up button when warning prompt.
6. Odin download mode will be loaded.
5. Connect USB cable to your phone.
7. At PC, extract firmware .tar (or .tar.md5) file that you downloaded to Firmware folder.
8. Then bring up Odin as administrator
9. Click on PDA. Select the .tar (or .tar.md5) at Firmware folder.
10. Click Start then.
11. Remove USB cable from your phone when you see green PASS!
That’s it. You have successfully installed stock official firmware on your Samsung Galaxy S4.
---------- Post added at 02:18 AM ---------- Previous post was at 02:17 AM ----------
You need NK1
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
I don't Skype but that's how to do it hope it helps
first steps aren't available to me, there are no options, it goes straight to the screen asking me if I want to do download mode by pressing volume up. I can get to download mode, when I try to load the md5 file via odin it fails every time, I have tried many different md5 files. some times it is an AUTH problem, sometimes NAND problem. Why is this so complicated? Why can't somebody just give me clear instructions that work? I can get to download mode, I can launch odin. I need a file that works and to know which boxes need to be checked.
I have done it did you download the Verizon nk1 file from the link in the post? That's where I got my files ......... Shizz its probably the version of Odin you are using try 1.85 I never have problems with that one but the others are sometimes hit and miss if you have the right files and its recognized by Odin then it has to be the Odin version you are using I have about seven different versions but I only use 1.85
---------- Post added at 03:44 AM ---------- Previous post was at 03:44 AM ----------
Boxes just leave the same don't check flash lock that's for sure
---------- Post added at 03:47 AM ---------- Previous post was at 03:44 AM ----------
If its in a tar.Md5 then it does not need to be extracted also
I have tried the older version of ODIN you recommended, 1.85 and the md5 file you gave me the link to. It doesn't work either, it will fail at some stage that says AUTH, which is what happens on the others, sometimes at the NAND part. fails very quickly, 3-4 seconds into it after I hit start. Anyone else have any advice? Is there another method besides ODIN because that seems like a bunch of nonsense to me, since I have tried about every version of ODIN and md5 file listed on these forums.
I have the same issue on my SCH-I545 that was running 5.1 Lollipop OF1. I flashed it back to OC1 and rooted the phone. I then flashed back to OF1 and everything was working perfect. My ultimate goal though was learn and to install custom roms but with the boot loader being locked on Lollipop you are limited to what you can install. So reading through forums I saw that there are a lot of people running @stang5litre custom rom. I found and followed the instructions after reading through almost the entire 300+ page thread. I did it exactly how it was posted but after the rom flashed and rebooted the phone would just hang on the custom boot screen. I waited like @stang5litre has said (for up to 15 min.) when it still didn't reload I pulled the battery and rebooted again. It still just hangs on the custom boot screen. I have re-flashed OF1 and OC1 with the same results.
Can I flash back to 4.4.2 like @Joker1716 is saying above? I thought once you have upgraded to Lollipop you can't revert back.
Any help would be greatly appreciated!
dhench66 said:
I have the same issue on my SCH-I545 that was running 5.1 Lollipop OF1. I flashed it back to OC1 and rooted the phone. I then flashed back to OF1 and everything was working perfect. My ultimate goal though was learn and to install custom roms but with the boot loader being locked on Lollipop you are limited to what you can install. So reading through forums I saw that there are a lot of people running @stang5litre custom rom. I found and followed the instructions after reading through almost the entire 300+ page thread. I did it exactly how it was posted but after the rom flashed and rebooted the phone would just hang on the custom boot screen. I waited like @stang5litre has said (for up to 15 min.) when it still didn't reload I pulled the battery and rebooted again. It still just hangs on the custom boot screen. I have re-flashed OF1 and OC1 with the same results.
Can I flash back to 4.4.2 like @Joker1716 is saying above? I thought once you have upgraded to Lollipop you can't revert back.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
I bet FF moved wipe to at the end. Which is why your not booting. You have to set it twice with FF or it moves wipe to the end. This is a known bug with FF. Before you hit the bolt make sure the order is correct and you will boot up fine. Happy to help you
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
I bet FF moved wipe to at the end. Which is why your not booting. You have to set it twice with FF or it moves wipe to the end. This is a known bug with FF. Before you hit the bolt make sure the order is correct and you will boot up fine. Happy to help you
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
Thanks for the quick reply @stang5litre....I did move wipe back to the front as I read to do so in your thread. But now the phone will not get past the custom boot screen even after I've re-flashed the OF1 & OC1 files. Do I have any other options on fixing this phone? I don't have a problem buying a new one as I've had this for a while but I really hate to give up on this if there is away to get it back up and running.
dhench66 said:
Thanks for the quick reply @stang5litre....I did move wipe back to the front as I read to do so in your thread. But now the phone will not get past the custom boot screen even after I've re-flashed the OF1 & OC1 files. Do I have any other options on fixing this phone? I don't have a problem buying a new one as I've had this for a while but I really hate to give up on this if there is away to get it back up and running.
Click to expand...
Click to collapse
Your not hard bricked so you can definitely get it back so don't worry about that[emoji106] . At the mall with Santa . Soon as I get back I'll get you back going.
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
Your not hard bricked so you can definitely get it back so don't worry about that[emoji106] . At the mall with Santa . Soon as I get back I'll get you back going.
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
Awesome Thanks! Tell Santa I said hi:angel:
dhench66 said:
Awesome Thanks! Tell Santa I said hi:angel:
Click to expand...
Click to collapse
Sorry took so long had to get all the family stuff done. So where are you at with the phone atm? So I can tell you the right files . Also what base were you OF1? Thanks
Ps Santa says wazzzz up!!!![emoji318] [emoji320]
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
Sorry took so long had to get all the family stuff done. So where are you at with the phone atm? So I can tell you the right files . Also what base were you OF1? Thanks
Ps Santa says wazzzz up!!!![emoji318] [emoji320]
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
I have similar issuse. I'm on OF1.
Rooted then tried to flash newest TWRP via the app. Wont reboot or go into recovery. Can get it to reboot unless I odin a OC1 or OF1 kernel.
Best way to ODIN back to OF1 or an earlier firmware?
Hymizzle said:
I have similar issuse. I'm on OF1.
Rooted then tried to flash newest TWRP via the app. Wont reboot or go into recovery. Can get it to reboot unless I odin a OC1 or OF1 kernel.
Best way to ODIN back to OF1 or an earlier firmware?
Click to expand...
Click to collapse
What were you originally on(base)? If your not mdk then you cantt use TWRP.
You would need to Odin back to what you came from re root and then go through the the process. But I need to know what base you were on when you rooted.
Thanks
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
What were you originally on(base)? If your not mdk then you cantt use TWRP.
You would need to Odin back to what you came from re root and then go through the the process. But I need to know what base you were on when you rooted.
Thanks
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
I was OF1 base. Cant find an ODIN for OF1. It wont factory reset in phone.
Hymizzle said:
I was OF1 base. Cant find an ODIN for OF1. It wont factory reset in phone.
Click to expand...
Click to collapse
Can you get into download mode?
You have to use Flash Fire
Sent from my stang5litre Edition 5.0 using Tapatalk
stang5litre said:
Can you get into download mode?
You have to use Flash Fire
Sent from my stang5litre Edition 5.0 using Tapatalk
Click to expand...
Click to collapse
I can get in download mode. I have Flashfire installed. This is what I should try?:
http://forum.xda-developers.com/gal...1-keeproot-t3182544/post62413212#post62413212
Related
I was trying to flash an updated version of the ROM i had, but a verizon message came up, essentially telling me my bootloader was still locked. I looked it up, and the fix is supposedly flashing it back to stock, which I tried, but it has no internet connection (wifi or service) and it loaded the ROM i had been trying to install earlier.
I double checked my model number, to see if that did anything, and it's changed from what it was when I flashed the first ROM, so i tried flashing the firmware for that model, but Odin just gives me a fail message for that, so i can get my ROM to run, but my internet is borked, and I can't get it back to stock to see if that fixes it.
Because I can't get internet access it's screwing up a lot of my attempts to fix it, and my computer refuses to read it, so I can't do anything from that end.
Also, while my WiFi refuses to turn on (switch pops back to grey after trying to turn it on) my service bars act like they're receiving, changing up and down, but they're greyed out and the carrier name is 'Empty'.
NickBroomfield said:
I was trying to flash an updated version of the ROM i had, but a verizon message came up, essentially telling me my bootloader was still locked. I looked it up, and the fix is supposedly flashing it back to stock, which I tried, but it has no internet connection (wifi or service) and it loaded the ROM i had been trying to install earlier.
I double checked my model number, to see if that did anything, and it's changed from what it was when I flashed the first ROM, so i tried flashing the firmware for that model, but Odin just gives me a fail message for that, so i can get my ROM to run, but my internet is borked, and I can't get it back to stock to see if that fixes it.
Because I can't get internet access it's screwing up a lot of my attempts to fix it, and my computer refuses to read it, so I can't do anything from that end.
Also, while my WiFi refuses to turn on (switch pops back to grey after trying to turn it on) my service bars act like they're receiving, changing up and down, but they're greyed out and the carrier name is 'Empty'.
Click to expand...
Click to collapse
Going to need more info.
What is your original build?
What rom were you trying to flash?
How are you trying to flash it?
etc..........
Sent from my NCC-1701 using Tapatalk 4
riker147 said:
Going to need more info.
What is your original build?
What rom were you trying to flash?
How are you trying to flash it?
etc..........
Click to expand...
Click to collapse
Original Build: if you mean what I was using before flash, I can't find the link to it, it was one of the first stock android ROMs for the GS4. If you mean prior to that, it was the standard Samsung TouchWiz the GS4 comes with.
I was trying to flash the ROM found here: http://forum.xda-developers.com/showthread.php?t=2340783
I flashed it using TWRP > wipe data/cache, factory reset > install zip > wipe dalvik cache > boot. When that didn't seem to work, I tried flashing stock using Odin, as I can't get the zips onto my phone now.
NickBroomfield said:
Original Build: if you mean what I was using before flash, I can't find the link to it, it was one of the first stock android ROMs for the GS4. If you mean prior to that, it was the standard Samsung TouchWiz the GS4 comes with.
I was trying to flash the ROM found here: http://forum.xda-developers.com/showthread.php?t=2340783
I flashed it using TWRP > wipe data/cache, factory reset > install zip > wipe dalvik cache > boot. When that didn't seem to work, I tried flashing stock using Odin, as I can't get the zips onto my phone now.
Click to expand...
Click to collapse
I mean the last official build the phone was on before you started flashing. (MDK, ME7, MI1, MJ7 or MK2)
Did you ever take any OTA's?
When you say TWRP, do you mean TWRP with Safestrap or just TWRP?
riker147 said:
I mean the last official build the phone was on before you started flashing. (MDK, ME7, MI1, MJ7 or MK2)
Did you ever take any OTA's?
When you say TWRP, do you mean TWRP with Safestrap or just TWRP?
Click to expand...
Click to collapse
Erm, I believe it was MDK, but I'm not certain, and I wouldn't know how to go about checking that retroactively if I could.
I didn't knowingly take any OTA's
Just TWRP.
NickBroomfield said:
Erm, I believe it was MDK, but I'm not certain, and I wouldn't know how to go about checking that retroactively if I could.
I didn't knowingly take any OTA's
Just TWRP.
Click to expand...
Click to collapse
OK so if your phone was running Twrp, and not SafeStrap twrp, we can then probably assume your phone was on MDK.
What tar file did you use to Odin?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
OK so if your phone was running Twrp, and not SafeStrap twrp, we can then probably assume your phone was on MDK.
What tar file did you use to Odin?
Click to expand...
Click to collapse
I don't know what you want exactly, the name of the file I tried to use to flash back to stock is 'SCH-I545_MD2_423399_Kernel.tar', I can't link because xda says I can't link outside sources until 10 posts, and I'm a tad new.
NickBroomfield said:
I don't know what you want exactly, the name of the file I tried to use to flash back to stock is 'SCH-I545_MD2_423399_Kernel.tar', I can't link because xda says I can't link outside sources until 10 posts, and I'm a tad new.
Click to expand...
Click to collapse
OK so that looks like the pre release kernel and not the stock firmware file. So that may explain why you're having issues still.
Sent from my SCH-I545 using Tapatalk
---------- Post added at 12:34 AM ---------- Previous post was at 12:32 AM ----------
You need to go here
http://forum.xda-developers.com/showthread.php?t=2289325
Click the link in that op then click on the TAR folder once your on that site it sends you to.
That's the mdk stock firmware
Sent from my SCH-I545 using Tapatalk
Mistertac said:
OK so that looks like the pre release kernel and not the stock firmware file. So that may explain why you're having issues still.
Click to expand...
Click to collapse
Oh, I did flash this 'SCH-I545_MDK_562219_Kernel.tar' afterwards, which didn't make anything better or worse.
NickBroomfield said:
Oh, I did flash this 'SCH-I545_MDK_562219_Kernel.tar' afterwards, which didn't make anything better or worse.
Click to expand...
Click to collapse
Those files youve been mentioning are from here
http://forum.xda-developers.com/showthread.php?t=2290798
Those are needed to r
ROOT the phone AFTER you flash the stock firmware I linked you to.
So am I confused here or are you trying to get it back to stock MDK....or just trying to root the phone?
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Those files youve been mentioning are from here
http://forum.xda-developers.com/showthread.php?t=2290798
Those are needed to r
ROOT the phone AFTER you flash the stock firmware I linked you to.
So am I confused here or are you trying to get it back to stock MDK....or just trying to root the phone?
Click to expand...
Click to collapse
Oh, that might be why I'm having problems. You're not confused, I just probably shouldn't be doing this on my own.
NickBroomfield said:
Oh, that might be why I'm having problems. You're not confused, I just probably shouldn't be doing this on my own.
Click to expand...
Click to collapse
Tell you what... Go to this thread
http://forum.xda-developers.com/showthread.php?t=2301259
It has a very nice set of instructions that the first one I linked you to doesn't.
That links you to the no wipe MDK tar file. You should be OK to use that one.
Very important that you use the MDK file and not one of the others as those will lock your phone back up and no more custom recovery for you.
Its fairly easy. Let me know how I can help
Sent from my SCH-I545 using Tapatalk
---------- Post added at 01:05 AM ---------- Previous post was at 12:59 AM ----------
I'm hitting the hay ... Good luck with that.
If you run into problems with the no wipe tar files in the second link go and download the mdk tar file from
http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR
And try that.
Make sure you're using a good USB cable as well.
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Tell you what... Go to this thread
http://forum.xda-developers.com/showthread.php?t=2301259
It has a very nice set of instructions that the first one I linked you to doesn't.
That links you to the no wipe MDK tar file. You should be OK to use that one.
Very important that you use the MDK file and not one of the others as those will lock your phone back up and no more custom recovery for you.
Its fairly easy. Let me know how I can help
Click to expand...
Click to collapse
I got my phone back to stock, made sure my internet was working, rooted it, installed TWRP, and everything worked fine, but I have a question that might be a bit out of the bounds of this post. When I tried to use TWRP to flash stock android onto it I get the message "Verizon has detected unauthorized software [etc]". This is linked to the bootloader, if I recall correctly, but I can't find some really good help with it.
Further help would appreciated, but what you've done already has helped me far more than I had hoped when I posted, so thank you, oh so much.
NickBroomfield said:
When I tried to use TWRP to flash stock android onto it I get the message "Verizon has detected unauthorized software.
Click to expand...
Click to collapse
Ok so you're in TWRP and what file are you trying to flash exactly??
We use Odin to flash stock firmwares. And devs do make"stock ROMs" that can be flashed in twrp...so really I need to know what it isv exactly you're trying to do...
Again
What file and what steps you're taking and then I can help more
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Ok so you're in TWRP and what file are you trying to flash exactly??
We use Odin to flash stock firmwares. And devs do make"stock ROMs" that can be flashed in twrp...so really I need to know what it isv exactly you're trying to do...
Again
What file and what steps you're taking and then I can help more
Click to expand...
Click to collapse
In TWRP, trying to flash the ROM I linked in my second post: http://forum.xda-developers.com/showthread.php?t=2340783
As for steps: I boot into TWRP > factory reset > wipe Dalvik > Install zip (for the ROM and GApps) > Wipe Dalvik > reboot system.
NickBroomfield said:
In TWRP, trying to flash the ROM I linked in my second post: http://forum.xda-developers.com/showthread.php?t=2340783
As for steps: I boot into TWRP > factory reset > wipe Dalvik > Install zip (for the ROM and GApps) > Wipe Dalvik > reboot system.
Click to expand...
Click to collapse
Ok from I saw in that post that ROM is for the i9505 S4 I believe, which is the international version of our phone.
Try downloading this one
http://forum.xda-developers.com/showthread.php?t=2384362
It's a stock ROM based off our Verizon S4
Sent from my SCH-I545 using Tapatalk
Mistertac said:
Ok from I saw in that post that ROM is for the i9505 S4 I believe, which is the international version of our phone.
Try downloading this one
http://forum.xda-developers.com/showthread.php?t=2384362
It's a stock ROM based off our Verizon S4
Click to expand...
Click to collapse
His post currently says 'uploading' under downloads, so for now, after I get it, my process is correct, right? Just the wrong software? Or is there a problem with what I'm doing as well?
NickBroomfield said:
His post currently says 'uploading' under downloads, so for now, after I get it, my process is correct, right? Just the wrong software? Or is there a problem with what I'm doing as well?
Click to expand...
Click to collapse
OK . no you're process is ok.
Try looking here for another ROM
http://forum.xda-developers.com/galaxy-s4-verizon/development
Sent from my SCH-I545 using Tapatalk
---------- Post added at 03:51 AM ---------- Previous post was at 03:50 AM ----------
Or look here for aosp ROMs
http://forum.xda-developers.com/galaxy-s4-verizon/orig-development
Sent from my SCH-I545 using Tapatalk
---------- Post added at 03:54 AM ---------- Previous post was at 03:51 AM ----------
I'm not sure what state your phone is in now however. You may have to Odin back to stock mdk then reroot and install twrp again. What is your phone doing now? Can still get into recovery
Sent from my SCH-I545 using Tapatalk
Mistertac said:
OK . no you're process is ok.
Try looking here for another ROM
http://forum.xda-developers.com/galaxy-s4-verizon/development
Or look here for aosp ROMs
http://forum.xda-developers.com/galaxy-s4-verizon/orig-development
Click to expand...
Click to collapse
So just any ROM?
Mistertac said:
I'm not sure what state your phone is in now however. You may have to Odin back to stock mdk then reroot and install twrp again. What is your phone doing now? Can still get into recovery
Click to expand...
Click to collapse
I already flashed to stock/rerooted/reinstalled twrp, previously it was giving me the error "Verizon has encountered unauthorized software on this device, please turn off your phone and take it to the nearest store" or something along those lines.
newb question: what does AOSP stand for?
NickBroomfield said:
So just any ROM?
I already flashed to stock/rerooted/reinstalled twrp, previously it was giving me the error "Verizon has encountered unauthorized software on this device, please turn off your phone and take it to the nearest store" or something along those lines.
newb question: what does AOSP stand for?
Click to expand...
Click to collapse
AndroidOpenSourceProject
And yea those two links I sent you are for our Verizon s4. You an install any ROM from either one of those forums, just read the posts and follow the devs directions and you're Golden
Sent from my SCH-I545 using Tapatalk
Hi.
I have a Verizon Galaxy S4 upgraded to NC5 kitkat 4.4.2.
I was on Hyperdrive Rom 17.1 and I wanted to try out other roms so I installed the latest version of Chaos rom. I know how to install other roms because I've done so on other phones. So after I installed the rom all worked great. But after I rebooted my phone the phone wont go past the Samsung Galaxy S4 Splash. When ever I reboot it shows the splash then the screen goes black. I've spent hours trying to fix this. NOTE: I can go into Download Mode and Recovery Mode.
What should I do? Is there any method to fix this? Ive tried reinstalling normal stock via oden and the default recovery mode
Im stumped at this point. Any help would be greatly appreciated!
Ace The Creator said:
Hi.
I have a Verizon Galaxy S4 upgraded to NC5 kitkat 4.4.2.
I was on Hyperdrive Rom 17.1 and I wanted to try out other roms so I installed the latest version of Chaos rom. I know how to install other roms because I've done so on other phones. So after I installed the rom all worked great. But after I rebooted my phone the phone wont go past the Samsung Galaxy S4 Splash. When ever I reboot it shows the splash then the screen goes black. I've spent hours trying to fix this. NOTE: I can go into Download Mode and Recovery Mode.
What should I do? Is there any method to fix this? Ive tried reinstalling normal stock via oden and the default recovery mode
Im stumped at this point. Any help would be greatly appreciated!
Click to expand...
Click to collapse
You will need to boot into recovery and wipe everything except internal SD and factory reset. Surge has a thread here http://forum.xda-developers.com/showthread.php?t=2578209 with all of the ODIN files you will need. I'm not sure what you mean by "tried to reinstall normal stock with ODIN". Do you mean the ODIN flash failed or that the flash worked but you are still unable to access your phone?
---------- Post added at 11:24 PM ---------- Previous post was at 11:19 PM ----------
Ace The Creator said:
Hi.
I have a Verizon Galaxy S4 upgraded to NC5 kitkat 4.4.2.
I was on Hyperdrive Rom 17.1 and I wanted to try out other roms so I installed the latest version of Chaos rom. I know how to install other roms because I've done so on other phones. So after I installed the rom all worked great. But after I rebooted my phone the phone wont go past the Samsung Galaxy S4 Splash. When ever I reboot it shows the splash then the screen goes black. I've spent hours trying to fix this. NOTE: I can go into Download Mode and Recovery Mode.
What should I do? Is there any method to fix this? Ive tried reinstalling normal stock via oden and the default recovery mode
Im stumped at this point. Any help would be greatly appreciated!
Click to expand...
Click to collapse
This process worked for me in the past also. Wipe/factory reset and then start from scratch. http://forum.xda-developers.com/showthread.php?t=2763834
liljoe727 said:
You will need to boot into recovery and wipe everything except internal SD and factory reset. Surge has a thread here http://forum.xda-developers.com/showthread.php?t=2578209 with all of the ODIN files you will need. I'm not sure what you mean by "tried to reinstall normal stock with ODIN". Do you mean the ODIN flash failed or that the flash worked but you are still unable to access your phone?
Click to expand...
Click to collapse
Thanks for the reply!!!
How do I do that? I just go into the recovery and choose the wipe data option? And I only have the standard android recovery. I dont have SS or TWRP or CWM installed atm
And yeah Odin Flash failed. But I didnt use the MK2 files though. I used the NC5 files. Im not sure if that could be the issue but I'll give it a try.
Ace The Creator said:
Thanks for the reply!!!
How do I do that? I just go into the recovery and choose the wipe data option? And I only have the standard android recovery. I dont have SS or TWRP or CWM installed atm
And yeah Odin Flash failed. But I didnt use the MK2 files though. I used the NC5 files. Im not sure if that could be the issue but I'll give it a try.
Click to expand...
Click to collapse
Yes, boot into normal recovery and wipe data/cache/dalvik/factory reset then try the ODIN flash. You can try the full wipe method to get back to NC5 right away but you may need to start at MK2.
liljoe727 said:
Yes, boot into normal recovery and wipe data/cache/dalvik/factory reset then try the ODIN flash. You can try the full wipe method to get back to NC5 right away but you may need to start at MK2.
Click to expand...
Click to collapse
Alright. But it only shows wipe data/factory reset.
I assume this is it though.
Again thanks for the help!
Ace The Creator said:
Alright. But it only shows wipe data/factory reset.
I assume this is it though.
Again thanks for the help!
Click to expand...
Click to collapse
I couldn't remember what all was there but yes, wipe everything you can except the internal storage. You are very welcome. I have bricked my phone about four times now, I know how it is. I just hope I can help.
liljoe727 said:
I couldn't remember what all was there but yes, wipe everything you can except the internal storage. You are very welcome. I have bricked my phone about four times now, I know how it is. I just hope I can help.
Click to expand...
Click to collapse
Im gonna give it a go after the files finish downloading. Hope this works!
Im glad theres people like you in this community. In the PS3 community everyone is to them selves :\
liljoe727 said:
I couldn't remember what all was there but yes, wipe everything you can except the internal storage. You are very welcome. I have bricked my phone about four times now, I know how it is. I just hope I can help.
Click to expand...
Click to collapse
It didnt work
I followed TheTechGuys method and I failed on both attempts .
What am I supposed to do?
I followed it and when it says it fails its completely normal then when I put in the other tar and uncheck the re partition box it still fails me.
What should I do?
Ace The Creator said:
It didnt work
I followed TheTechGuys method and I failed on both attempts .
What am I supposed to do?
I followed it and when it says it fails its completely normal then when I put in the other tar and uncheck the re partition box it still fails me.
What should I do?
Click to expand...
Click to collapse
Did you try the "Full Wipe AKA Emergency" on the first thread I linked to by Surge?
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
liljoe727 said:
Did you try the "Full Wipe AKA Emergency" on the first thread I linked to by Surge?
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
Click to expand...
Click to collapse
Yeah I did. Im now stuck with the firmware upgrade encountered an issue error.
What do I do now?
Ace The Creator said:
Yeah I did. Im now stuck with the firmware upgrade encountered an issue error.
What do I do now?
Click to expand...
Click to collapse
The only thing that has ever worked for me when I see that screen is to try to install firmware through KIES it will fail but it seems like it puts some sort of driver on your phone that allows ODIN to work. That may make no sense but I have gotten that stupid yellow triangle twice and KIES and then following the instructions, to the letter,on TechGuys thread worked both times.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
liljoe727 said:
The only thing that has ever worked for me when I see that screen is to try to install firmware through KIES it will fail but it seems like it puts some sort of driver on your phone that allows ODIN to work. That may make no sense but I have gotten that stupid yellow triangle twice and KIES and then following the instructions, to the letter,on TechGuys thread worked both times.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
Click to expand...
Click to collapse
I tried using KIES but it says that my S/N is wrong when ever I put it in.
Im really lost right now. Everytime I try doing the ODIN methods it works for a couple seconds then fails.
Ace The Creator said:
I tried using KIES but it says that my S/N is wrong when ever I put it in.
Im really lost right now. Everytime I try doing the ODIN methods it works for a couple seconds then fails.
Click to expand...
Click to collapse
If you are doing everything correctly on your end, I do not know why none of these methods are working for you. They have worked for me in the past. The only other thing I can point you to is this video https://www.youtube.com/watch?v=GL8XwuRYoWU&feature=youtu.be which is step by step instruction on how to use the method on Surges thread.
---------- Post added at 12:50 AM ---------- Previous post was at 12:48 AM ----------
Ace The Creator said:
I tried using KIES but it says that my S/N is wrong when ever I put it in.
Im really lost right now. Everytime I try doing the ODIN methods it works for a couple seconds then fails.
Click to expand...
Click to collapse
Did you try using a different USB cable? That may be the issue.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
liljoe727 said:
If you are doing everything correctly on your end, I do not know why none of these methods are working for you. They have worked for me in the past. The only other thing I can point you to is this video https://www.youtube.com/watch?v=GL8XwuRYoWU&feature=youtu.be which is step by step instruction on how to use the method on Surges thread.
---------- Post added at 12:50 AM ---------- Previous post was at 12:48 AM ----------
Did you try using a different USB cable? That may be the issue.
Sent from my rooted Verizon Galaxy S4 with Hyperdrive ROM using XDA Free Mobile App
Click to expand...
Click to collapse
I can try using another one. The original one that I had stopped working so I've been using another.
I no longer have the Sprint Note 3, and unfortunately will not be actively maintaining this thread. If you would like me to add more, comment or PM me the ROM link. Thank you
Hello everyone! I've had some users ask me how to do this, so for those who may be in the same situation, here is a guide to get Android 5.0.1 on your Sprint Note 3 (SM-N900p), for users that are SIM-unlocked and are on a different carrier than Sprint. This has presented me a few problems before, as you cannot go past the MJ4 modem, without losing access to SIM-unlock. In my experiences, I could never get any 5.0+ ROMs to work on my Note 3, while still being able to use/recognize a SIM card from another carrier. I could not get this specific ROM to boot on NC5, so NH7 (possibly newer) bootloader is required. This guide is based solely my own experiences, and a few reported successful users as well. Your mileage may vary.
I will not take responsibility for any damage done to your device, do this at your own risk and free will.
Alright, shall we get started?
What you will need:
Odin (Mirrors everywhere, search for it)
If you are not on NH7 or newer bootloader, Grab NH7 Stock restore found here
Grab latest TWRP (2.8.5.0) here
If you have a modem newer than MJ4, grab MJ4 Modem here
Grab ROM:
a) AICP (Android Ice Cold Project) CM12.1-based ROM
AICP here You will need hlte version! Hltespr does not recognize sim card
b) DarkLord ROM (Note 4 port)
DarkLord Rom here
c) Phronesis ROM (note 5 port) :
Phronesis ROM here
Compatible Kernels for Phronesis ROM (grab hlte-spr versions):
c1 Idle Kernel
c2 DarkLord Kernel
First and foremost: Make a nandroid backup in recovery. Save a copy of it to your PC, as well as a copy of your SDcard(s) for safe keeping.
Now that everything is backed up, and we have all of the necessary files listed above:
If you are already on NH7 bootloader, skip to step 8
1) Open up ODIN on PC and load NH7 stock restore into PDA slot (AP slot for newer versions of ODIN).
2) Do not check "auto-reboot" checkbox. If this is checked, click it once to un-check it.
3) Put phone into Download Mode (Hold 'vol. down' + 'power' + 'home' buttons while booting)
4) Connect phone to PC, there should be a light-blue box lit up with "COM:" + some numbers. This means Odin recognizes the device.
5) Click start button in ODIN to begin flashing. This will take a few minutes.
6) Once the flashing is finished, un-plug phone from PC and pull the battery out for ~10 seconds.
7) Boot straight into Download Mode again. Flash the NH7 file again in ODIN, exactly the same procedure as before. (Sorry, ODIN is picky sometimes, and this trick will get the flash to stick)
Your phone should now be on NH7 firmware, including the Modem and bootloader.
Now we need to get back on MJ4 Modem to be able to recognize the SIM-unlock once again (if you are already on MJ4 or older modem, skip to step 15):
8) Open ODIN on PC, and load MJ4 modem tar into PDA slot (AP slot for newer versions of ODIN)
9)Do not check "auto-reboot" checkbox. If this is checked, click it once to un-check it.
10) Put phone into Download Mode (Hold 'vol. down' + 'power' + 'home' buttons while booting)
11) Connect phone to PC, there should be a light-blue box lit up with "COM:" + some numbers. This means Odin recognizes the device.
12) Click start button in ODIN to begin flashing. This may take a few minutes.
13) Once the flashing is finished, un-plug phone from PC and pull the battery out for ~10 seconds.
14) Boot straight into Download Mode again. Flash the MJ4 modem file again in ODIN, exactly the same procedure as before. (Sorry, ODIN is picky sometimes, and this trick will get the flash to stick)
You should now have everything on NH7 firmware, with the exception of the MJ4 Modem needed for SIM-unlock.
Now we need a custom recovery to flash the ROM:
15) Open ODIN on PC, and load TWRP tar into PDA slot (AP slot for newer versions of ODIN)
16)Do not check "auto-reboot" checkbox. If this is checked, click it once to un-check it.
17) Put phone into Download Mode (Hold 'vol. down' + 'power' + 'home' buttons while booting)
18) Connect phone to PC, there should be a light-blue box lit up with "COM:" + some numbers. This means Odin recognizes the device.
19) Click start button in ODIN to begin flashing. This may take a few minutes.
20) Once the flashing is finished, un-plug phone from PC and pull the battery out for ~10 seconds.
21) Boot phone into recovery (Hold 'vol. up' + 'power' + 'home' buttons while booting).
22) Wipe system, data, cache, and dalvik cache
23) Flash ROM We should have everything on SDcard(s) still. If you do not, you may need to sideload ROM onto phone in recovery. Alternatively, you should be able to restore your backup and transfer it back to phone easily
24) PROFIT!!! Enjoy some Lollipop with your carrier of choice!
Click to expand...
Click to collapse
I know this is a tedious process, and there may be quicker ways of doing the same thing, but I've found this method most reliable. Hopefully this will help someone as much as figuring it out helped me
Please report your results
Credits: Give thanks to these folks, they well deserve it @semdoc for AICP android 5.1.1
@nambavuong for the beautiful ROM, thank you
@bigbiff for bringing TWRP to our device
@freeza for MJ4 flashable modem
@micmars for stock NH7 flashable firmware
Enjoy folks, cheers!
I'm on MJ4 modem, NK4 bootloader, Philz touch recovery. Have been able to get g00h's roms and darklord rom to work with T-Mobile.
shadowcliffs said:
I'm on MJ4 modem, NK4 bootloader, Philz touch recovery. Have been able to get g00h's roms and darklord rom to work with T-Mobile.
Click to expand...
Click to collapse
Mind if you could do a write up on her how you did Darklord's ROM? I saw you got the "...hlte v0.4.zip" working, but it was only "8.7MB". Did you flash that on top of Darklord's 2.0 or 2.1 or what? Thanks again!
Sent from my SM-N900P using Tapatalk
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
MattMatt0240 said:
Enjoy folks, cheers!
Click to expand...
Click to collapse
Thanks again for this Matt!
Sent from my SM-N900P using Tapatalk
shadowcliffs said:
I'm on MJ4 modem, NK4 bootloader, Philz touch recovery. Have been able to get g00h's roms and darklord rom to work with T-Mobile.
Click to expand...
Click to collapse
Awesome, I'm glad to hear that! I was just hoping to shed some light on some situations, as this seems to be a bit of a trick for us unlocked users at times
Thanks again for this Matt!
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Not a problem! Wish it could have been more detailed, but this worked for me, and seems to for others as well. So NH7 bootloader (or higher, confirmed now) will work as long as we keep MJ4 Modem.
DId you flash the CSC package and select TMB?
bykim5 said:
DId you flash the CSC package and select TMB?
Click to expand...
Click to collapse
I'm sorry, I did not include the CSC pack instructions in OP. I live in the U.S. and don't know anything about CSC, so I didn't bother. I will look further into it and update OP. If anyone knows anything about it, please feel free to chime in.
I'm pretty sure it has to do with what country you live in. Correct me if I'm wrong.
ndwgs said:
Mind if you could do a write up on her how you did Darklord's ROM? I saw you got the "...hlte v0.4.zip" working, but it was only "8.7MB". Did you flash that on top of Darklord's 2.0 or 2.1 or what? Thanks again!
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
DarkQueen 0.4 kernel works on Darklord 1.5. Just flash is over the rom. I can't remember anything special to do.
Darklord 2.0/2.1 comes with DarkQueen 0.4 kernel, so no need to flash kernel.
There is not much to write up. Just flash the rom and they all worked. You may need to tweak apn a bit. Some earlier version of TWRP has trouble with Darklord 2.0. I always use Phliz here. I'm staying with Darklord 2.1 for now. I might try out those two new roms from g00h, the pure stock N4 European rom and the customized Chinese leak N4 v3.5. I feel there is not much difference for me. What matters is stability and power efficiency, which is pretty hard to tell by individual unless there is something really off.
shadowcliffs said:
DarkQueen 0.4 kernel works on Darklord 1.5. Just flash is over the rom. I can't remember anything special to do.
Darklord 2.0/2.1 comes with DarkQueen 0.4 kernel, so no need to flash kernel.
There is not much to write up. Just flash the rom and they all worked. You may need to tweak apn a bit. Some earlier version of TWRP has trouble with Darklord 2.0. I always use Phliz here. I'm staying with Darklord 2.1 for now. I might try out those two new roms from g00h, the pure stock N4 European rom and the customized Chinese leak N4 v3.5. I feel there is not much difference for me. What matters is stability and power efficiency, which is pretty hard to tell by individual unless there is something really off.
Click to expand...
Click to collapse
Thank you for sharing! The reason for the guide is because there is confusion about updating bootloader and being able to keep MJ4 modem (which seems to be key for us unlocked users)
Tweaked Note 4 port is what I've been running, it is pretty nice, but I agree sometimes you need to see for yourself and not take someone else's experience as definitive.
Do you mind linking darkRom for future readers that may be interested? I may give it a try as well
MattMatt0240 said:
Thank you for sharing! The reason for the guide is because there is confusion about updating bootloader and being able to keep MJ4 modem (which seems to be key for us unlocked users)
Tweaked Note 4 port is what I've been running, it is pretty nice, but I agree sometimes you need to see for yourself and not take someone else's experience as definitive.
Do you mind linking darkRom for future readers that may be interested? I may give it a try as well
Click to expand...
Click to collapse
[ROM,TW] Note 4 port 5.0.1 - DarkLord rom v2.1 N910F BOB4 by Samsungviet
I get a "Fused 3 > 2" error when trying to flash MJ4
Update: It seems like it works fine on MI3 though.
philcurious said:
I get a "Fused 3 > 2" error when trying to flash MJ4
Update: It seems like it works fine on MI3 though.
Click to expand...
Click to collapse
Hmm... Beyond my knowledge. Just to clarify, mj4 is the latest modem we can use with sim unlock. Any modem prior will work fine. Mind sharing some details on what ROM/version you are coming from before trying to flash mj4 modem? I will update OP.
Edit: were you mi3 bootloader when trying to flash mj4 modem? Like I said, I don't know alot about that error, but maybe you can't have higher version of modem than bootloader.
MattMatt0240 said:
Hmm... Beyond my knowledge. Just to clarify, mj4 is the latest modem we can use with sim unlock. Any modem prior will work fine. Mind sharing some details on what ROM/version you are coming from before trying to flash mj4 modem? I will update OP.
Edit: were you mi3 bootloader when trying to flash mj4 modem? Like I said, I don't know alot about that error, but maybe you can't have higher version of modem than bootloader.
Click to expand...
Click to collapse
I was on NH7 when i tried to flash the MJ4 modem. And if i recall, MI3 is older than MJ4, so i don't know why it worked because i also thought it wouldn't with the NH7 bootloader. But the phone is now off my hands after 3 days of working to get it to unlock without some sort of boot loop.
philcurious said:
I was on NH7 when i tried to flash the MJ4 modem. And if i recall, MI3 is older than MJ4, so i don't know why it worked because i also thought it wouldn't with the NH7 bootloader. But the phone is now off my hands after 3 days of working to get it to unlock without some sort of boot loop.
Click to expand...
Click to collapse
They are alphabetically ordered, so yes, mi3 is older than mj4. Regardless, thank you for sharing!
Cheers!
MattMatt0240 said:
I'm sorry, I did not include the CSC pack instructions in OP. I live in the U.S. and don't know anything about CSC, so I didn't bother. I will look further into it and update OP. If anyone knows anything about it, please feel free to chime in.
I'm pretty sure it has to do with what country you live in. Correct me if I'm wrong.
Click to expand...
Click to collapse
So to be clear, this has nothing to do with US? This CSC? I seen that we (USA users) might need this on the Darklord ROM, or no? Have you tried what Shadow linked you? I've not made the jump to Darklord, but it looks like the battery is really a phenom on that ROM and I might try. I just don't know about the CSC editing
Sent from my SM-N900P using Tapatalk
ndwgs said:
So to be clear, this has nothing to do with US? This CSC? I seen that we (USA users) might need this on the Darklord ROM, or no? Have you tried what Shadow linked you? I've not made the jump to Darklord, but it looks like the battery is really a phenom on that ROM and I might try. I just don't know about the CSC editing
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Alright, here is what I've experienced:
I am running g00hs tweaked note 4 port on my sm-n900p on straight talk service, without flashing CSC. I haven't had 1 single issue.
I flashed the ROM on my wife's sm-n900p, with sprint service, and could not for the life of me get data to work at all. I even flashed CSC code (TMB/T-Mobile USA CSC code) and still nothing. I think it has something wrong with CDMA networks. I could be wrong. So I restored her EFS partition so she was back on SPT CSC (Sprint USA code, what comes stock on her phone).
So all in all, I don't feel the CSC is necessary unless you have other needs for it. I personally still don't understand, or see the use of flashing CSC codes. Even though it is said to be necessary.
I have not tried DarkLord ROM yet, I am pretty content on what I'm using now. If you try it out, please feel free to share your details and experience
@MattMatt0240
You might want to edit your OP, g00h was banned, and his work is taken down. Also, your link for Darklord's is wonky, it doesn't go to the right thread.
Just a heads up, man.
---------- Post added at 12:38 PM ---------- Previous post was at 12:18 PM ----------
Anybody tried updating to the latest KK bootloader, NK4?
LINK RIGHT HERE FROM JIMWEEBZ KK NK4 DEODEXED
ndwgs said:
@MattMatt0240
You might want to edit your OP, g00h was banned, and his work is taken down. Also, your link for Darklord's is wonky, it doesn't go to the right thread.
Just a heads up, man.
---------- Post added at 12:38 PM ---------- Previous post was at 12:18 PM ----------
Anybody tried updating to the latest KK bootloader, NK4?
LINK RIGHT HERE FROM JIMWEEBZ KK NK4 DEODEXED
Click to expand...
Click to collapse
Thanks for the heads up, updated OP. Darklord link should be fine, i re-copied and pasted straight from thread, was the same as before.
Newer bootloaders should work, as long as you are on nh7 or newer (from my own, and other's reported experiences)
MattMatt0240 said:
Thanks for the heads up, updated OP. Darklord link should be fine, i re-copied and pasted straight from thread, was the same as before.
Newer bootloaders should work, as long as you are on nh7 or newer (from my own, and other's reported experiences)
Click to expand...
Click to collapse
The Darklord link works on the Tapa App, but in a laptop, it doesn't. It has a weird link to it. Let me copy the link when clicked from a computer...
Sent from my SM-N900P using Tapatalk
---------- Post added at 09:53 PM ---------- Previous post was at 09:49 PM ----------
http://xn--http-996a//forum.xda-dev...tw-note-4-port-5-0-1-darklord-rom-1-t3017604“
ndwgs said:
The Darklord link works on the Tapa App, but in a laptop, it doesn't. It has a weird link to it. Let me copy the link when clicked from a computer...
Sent from my SM-N900P using Tapatalk
---------- Post added at 09:53 PM ---------- Previous post was at 09:49 PM ----------
http://xn--http-996a//forum.xda-dev...tw-note-4-port-5-0-1-darklord-rom-1-t3017604“
Click to expand...
Click to collapse
Fixed for sure this time. Was editing it from tapatalk, Apparently they have some redirection hidden in their URL tags. Tested from desktop, works now Thanks again!
MattMatt0240 said:
Fixed for sure this time. Was editing it from tapatalk, Apparently they have some redirection hidden in their URL tags. Tested from desktop, works now Thanks again!
Click to expand...
Click to collapse
Not a problem, it eliminates others asking of the links "dead" or "invalid" in the future when we move on to another device. Always looking out for the future users ! :laugh:
---------- Post added at 10:47 PM ---------- Previous post was at 10:13 PM ----------
@MattMatt0240
Mind hitting me up on PM about g00h's rom? I don't think we can post it publicly. Darklord isn't playing nice on my rig, and before I even could download g00h's, it was taken down by the Mods. Thanks Matt.
So, recently I rooted my GS4 SCH-I545 and wanted to install a custom rom. I installed ROM Manager and tried to install a custom recovery, but overtime I would go into recovery, it would show a dying android with the message "No Command" on the screen, then It would take me to the stock recovery.
-------------------------------------------------------
Later I downloaded TWRP Manager and looked for a custom recovery there. I found one that seemed right and downloaded it. It rebooted my phone and instead of taking me to recovery mode, it took me to the ODIN downloading screen, but on top it said, "COULD NOT DO A NORMAL BOOT" and it said Downloading. The only way to get onto the phone was for me to go to ODIN and flash OC1 firmware onto the phone, and then it would boot up. Otherwise, now I cannot do a factory reset, and/or go into recovery mode.
Is there any possible solutions on how to get the phone back to normal?
-------------------------------------------------------
BTW: My Baseband or Boot-loader is: I545VRUGOF1
Try flashing the full of1 tar
whowatchlist said:
Try flashing the full of1 tar
Click to expand...
Click to collapse
Ok then, but I have a few questions. First, what will this do to my phone? My next question is, will this brick my phone? Lastly, do I download the TAR, click the AP button on ODIN, click the TAR file, then flash it to my Phone?
---By the way, can you give me a link to the OF1 tar?
I have the OF1 ".tar.md5", also I can get you back to running prefect stock, then guide you thru the right steps to root and fix up your device!
Message me on hangouts, or PM me here!
Sent from my SCH-I545 using Tapatalk
KaosMaster said:
I have the OF1 ".tar.md5", also I can get you back to running prefect stock, then guide you thru the right steps to root and fix up your device!
Message me on hangouts, or PM me here!
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Ok, then what is your Hangout, so I can add you. Otherwise, its fine if you tell me the steps here. Although, it'd be better if you send me the steps on Hangouts.
For Samsung Galaxy Note Edge SM-N915P
Build on the latest stock ROM
Stock Deodex - No Root - No Knox - Debloat
ROM Based on
Model: SM-N915P (Snapdragon)
PDA Version N915PVPU4DPD1
Build Date 01.04.2016
Changelist 7697088
OS Marshmallow - Version 6.0.1
[FONT="]DOWNLOAD LINK [/FONT]
[FONT="]Install from [FONT="]TW[FONT="]RP (full wipe are recom)[/FONT][/FONT][/FONT]
N9150BPE1-Binh24ROM.zip 1.4 GB
[FONT="][FONT="][FONT="][FONT="]INSTALL FROM ODIN[/FONT][/FONT][/FONT][/FONT]
KERNEL MODEM 6.0.1
SBOOT-BootLoader 6.0.1
[FONT="]Video Preview 5.1.1:[/FONT]
At work right now, will check it out once I get home. Thanks.
Just what i was looking for.
Cant get linked
Ickyz said:
Cant get linked
Click to expand...
Click to collapse
Uploaded
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Havnt gotten to try it
Tried Rom & Flashed Modem but couldn't get SBOOT, 2 Odin , Kept gettin No Service
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
elfeo0 said:
I flash this rom, it does takes from 5 to 10 minutes to reboot. After that i odin the other two files but no baseband. No signal no nathing. Does not work.
Click to expand...
Click to collapse
Odin sboot+ kernel modem first then Rom
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
I did that first, and it did not work, i did that second and it did not work. I back up my EFS and Modem and flash that too and it did not work. ( i did not made a back up before) but now i do. I will make another back up sonce just got my phone set up again, and will try it again and will post in a hour or so after im done.
I will back up my current phone before trying this.
Steps
1. Odin sboot file. And reboot.
2. Odin Modem file. And reboot.
3. Twrp , clean install of yoir rom.
4. If it works , post to this tread.
5. If it not works, flash back up and post to this tread.
Did not work
binh24 said:
Odin sboot+ kernel modem first then Rom
Click to expand...
Click to collapse
1. Odin SBOOT-BootLoader 6.0.1
2. Odin KERNEL MODEM 6.0.1
3. Screen shot of phone info settings after I Odin Sboot and Kernel
3. Flash N9150BPE1-Binh24ROM.zip
Took 15 minutes on the LTE Sprint boot screen.
Took 3 to 5 minutes on the Preparing phone set up screen
Was not able to connect to Wi-Fi, and no phone signal, and Screen shot of phone settings after phone set up.
One thing i forgot to mention is that after all its set up i get a pop op aboit sd card being corrupt and to tap it to fix it/format it.
Do you want me to flash or Odin something before I put my back up, as my phone it only good for not being a phone right now?
Update. Now running my back up as i was not able to get a respond and i needed my phone. Thanks, will keep reading this tread to see what happens. Off to work now.
dinaps86 said:
Thank u very much for this, I hate to be a pain but I'm just wondering is selinux permissive on this, and is there any way you could take a look at the kernel freeza built for out device an see why it isn't booting
Sent from my SM-N915P using XDA-Developers mobile app
Click to expand...
Click to collapse
Dinaps,
Did you get this up & going w| Service?
---------- Post added at 01:47 PM ---------- Previous post was at 01:46 PM ----------
How y'all Odin'ing Sboot?
I cant even get odin to find the file
---------- Post added at 02:24 PM ---------- Previous post was at 01:47 PM ----------
Soon as I can im Ditching this PHONE
Tbh I don't remember, it did boot, ik my WiFi was shot I pretty much booted it and than flashed freeza kernel which didn't boot sorry man
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
?
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
goxthak0 said:
I'm not able to boot did as you mentioned
Flased sboot in odin then reboot
Flashed Kernal Modn and reboot then flased with TWRP 3 I'm not able to pass thue sprint screen... I'm I doing something wrong.
Click to expand...
Click to collapse
The LTE Sprint boot screen takes about 10 to 15 minutes.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Try flash stock Firmware first then odin TWRP to intall this ROM
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Ickyz said:
Just got done trying that....
It didn't work. Still says searching for service & when i got to Mobile Network & click to see if APN is good I get Insert SIM
Click to expand...
Click to collapse
I have stated this problem. But the OP has not answered on what the problem would be and how ro fix it or what to try. See the screenshots i posted, no baseband. I get no service, no WiFi, it does not work. It allso does not reads the sd card.
Ickyz said:
How y'all flashing SBOOT w|Odin I can get odin to pick up NON-HOS.bin but as far , as the other files [MBN] It wont show them
Click to expand...
Click to collapse
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
binh24 said:
Try flash stock Firmware first then odin TWRP to intall this ROM
Click to expand...
Click to collapse
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
goxthak0 said:
Its .tar format you should be able to get with AP option in odin 3.10
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
I tried flashing it after flashing stock firmware.. also flashed it waited to half an hour then did factory reset cause sometime it worked but its not working... I desperately wants to try this rom im quite fascinated with so many lock screen. I'll do few more attempt.
Click to expand...
Click to collapse
I flashed it as a Zip in Odin, Kernel & SBOOT but had no luck