I accidentally used the wrong file to root on my 5.1.1 t-mobile s6 and it got the "RECOVERY IS NOT SEANDROID ENFORCING"
I can only on download mode .
So I tried to re-root by using the 5.1.1 version and it still got the same error. Stupid, I know
I did some google search and I found out that I need to flash to stock firmware, so I tried.
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help.
This is the log of ODIN (3.10)
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
after i used a recovery file it's not showing any more" RECOVERY IS NOT SEANDROID ENFORCING" but still can"t use the phone any more .
plssss help
I'm getting the same error. Very annoying!
I would say try this here http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
it was another topic
Skhulile said:
I would say try this here http://forum.xda-developers.com/galaxy-s6/general/how-to-fix-rev-check-fail-device-2-t3146522
Click to expand...
Click to collapse
It was someone else that had the same problem "http://forum.xda-developers.com/ga...r file from ADB or fastboot.
Thx for ur help.
sunnyce said:
It was someone else that had the same problem "http://forum.xda-developers.com/ga...lve the problem???? i have the same issue....
Click to expand...
Click to collapse
idn1984 said:
hi dude,
did you manage to solve the problem???? i have the same issue....
Click to expand...
Click to collapse
try flashing the right file of TWRP and should get u in recovery. from there u should be able to install a custom rom using ADB or FASTBOOT.
sunnyce said:
try flashing the right file of TWRP and should get u in recovery. from there u should be able to install a custom rom using ADB or FASTBOOT.
Click to expand...
Click to collapse
thanks man, after installing the latest TWRP i was able to open recovery and install custom rom,
help
idn1984 said:
thanks man, after installing the latest TWRP i was able to open recovery and install custom rom,
Click to expand...
Click to collapse
hey mate how where u able to install a custom rom because I can't connect on the ADB sideloader and i am able to push a file but still can't install it . IT says fail .
what do u think i am doing wrong ?
What error is it? What are you trying to install
Skickat från min SM-G925F via Tapatalk
Related
Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
nandopires1989 said:
Hello there!
I have an i9505 and today I tried to install the 4.3 Google Edition on it, but I am experiencing some problems with the recovery.
I downloaded the ROM, the Recovery and Odin. After that I installed the recovery mode, made the Wipe Data/Factory Reset and that worked well. But i reallized that i forgot to put the ROM on the SD card.
After that I put the ROM on the SD card, and the Recovery mode doesn't open anymore...the message "Recovery Booting" appears, but then the phone turns on with the Android.
Can anyone help me? I want to open the recovery mode to run the new ROM.
Thanks a lot!
Click to expand...
Click to collapse
you may have to use the no wipe stock rom and start from scratch
Man, I cant even imagine how do I do that. Can u give me a north?
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
theidoctor said:
http://forum.xda-developers.com/showthread.php?t=2297370
link will have the link to the no wipe as well as root... and some other roms that might help
Click to expand...
Click to collapse
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
nandopires1989 said:
Thank you very much!
But could you explain me better what should I do? I don't understand this "no wipe", and everything else....coul'd u help me explaining with more details? I know that i've being boring hahaha...but i really don't understand well that.
Thanks sir!
Click to expand...
Click to collapse
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Perfect! I will try it now!
Thank you very much!
theidoctor said:
you have to dlownload and follow the steps to this guide.... http://forum.xda-developers.com/showthread.php?t=2301259
Click to expand...
Click to collapse
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
nandopires1989 said:
Bad news, the Odin returns this error
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NON-HLOS.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have any idea?
Click to expand...
Click to collapse
Hello There! I think I made it...I already made the Root, and Im here right now (http://forum.xda-developers.com/showthread.php?t=2292112) , but Im experiencing some dificulties with this...I'm not developer...coul'd u help me with more this?
Thanks!
Hi guys, forgive me about my bad english but i'm not english....ok, let's start with my problem.
Today i want to clean my gs3 because i want to make it return to standard condition (i had a 4.2.2 rom). So i follow a guide of an italian android forum (yes i'm italian) to make a deep clean. The problem is now, when i try to flash a stock rom with odin. I put the phone in download mode (in the counter i have only 2), odin recognize it and i press start, but the process stop and says this
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
the nand write fail, i think. I've tried a lot of thing, such as change pc or change cable, but always the same error. At least i try with the pit procedure, but always the same error. I can only enter in download mode rigght now, and when i swich on the phone normally it says "firmware upgrade encoutered an issue, Plese select recovery mode in Kies and try again.
I try the way by kies, but it didn't recognise the phone.
Plese, help me, i'm desperate....
what phone model? what file
Glebun said:
what phone model? what file
Click to expand...
Click to collapse
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
trasposone said:
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
Click to expand...
Click to collapse
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
you can't bump your thread more than once every 24 hours, it's against the rules.
if you flashed a pit file, you need to send it to ser
trasposone said:
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
Click to expand...
Click to collapse
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
slaphead20 said:
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
Click to expand...
Click to collapse
As well as slappy's suggestion, also post what it says for 'product name' when in download mode (if you can boot into download mode)..
Hey guys
Could need some quick assistanse getting CWM running.
I decided to get Omni KK running on my SGS2 i9100 to see if i can get a bit of fresh feeling to the old thingy.
I downloaded:
philz_touch_6.07.9-i9100.tar.md5
Boot the Phone into Download Mode.
Start Odin
Add the tar.md5 file to the PDA.
auto reboot and f.reset time is checked just as Philz thread says.
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin seems to fail to flash the file and i seriusly got no clue what the issue could be.
The phone is rooted, runs busybox, i did the EFS backup through ADB. So everything seems to be working fine except this part.
And unfortantly i cant install the zip file through Android 3e recovery and twrp from app-store says that the SGS2 is not supported.
Seriusly need a quick fix for this lil n00b issue i cant figure out.
Why not Zip FIle?
Myrmid0n said:
Hey guys
Could need some quick assistanse getting CWM running.
I decided to get Omni KK running on my SGS2 i9100 to see if i can get a bit of fresh feeling to the old thingy.
I downloaded:
philz_touch_6.07.9-i9100.tar.md5
Boot the Phone into Download Mode.
Start Odin
Add the tar.md5 file to the PDA.
auto reboot and f.reset time is checked just as Philz thread says.
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin seems to fail to flash the file and i seriusly got no clue what the issue could be.
The phone is rooted, runs busybox, i did the EFS backup through ADB. So everything seems to be working fine except this part.
And unfortantly i cant install the zip file through Android 3e recovery and twrp from app-store says that the SGS2 is not supported.
Seriusly need a quick fix for this lil n00b issue i cant figure out.
Click to expand...
Click to collapse
\
Why cant you install through Zip File??
Search for the file on d-h.st and install it!!
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?[/QUOTE]
Myrmid0n said:
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?
Click to expand...
Click to collapse
Remove the line which has assert in updater script and then try flashing
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Remove the line which has assert in updater script and then try flashing
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Worked with Odin after i found a new cwm file.
An older version, but good nuff to be able to install KitKat.
galaxys2root.com/cwmtwrp-recovery/
Myrmid0n said:
Worked with Odin after i found a new cwm file.
An older version, but good nuff to be able to install KitKat.
galaxys2root.com/cwmtwrp-recovery/
Click to expand...
Click to collapse
Hmm.
Add solved to your thread then
Sent from my GT-I9100 using Tapatalk 2
same problem here ... i also got error like this ...
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
cm.bin
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Smart switch is way better than odin.
Sent from my SM-G925F
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root again
http://www.sammobile.com/firmwares/database/SM-G925F/BTU/
[U,[/U]
callumbr1 said:
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root ]
Click to expand...
Click to collapse
Thanks will try this! Any idea as to why it fails on cm.bin?
supergoose360 said:
[U,[/U]
Thanks will try this! Any idea as to why it fails on cm.bin?
Click to expand...
Click to collapse
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
callumbr1 said:
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
Click to expand...
Click to collapse
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
supergoose360 said:
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
Click to expand...
Click to collapse
Was you on ee firmware before?
callumbr1 said:
Was you on ee firmware before?
Click to expand...
Click to collapse
The phone came with an ee sim card so i can only assume so.
supergoose360 said:
The phone came with an ee sim card so i can only assume so.
Click to expand...
Click to collapse
Did you get it direct from ee?
callumbr1 said:
Did you get it direct from ee?
Click to expand...
Click to collapse
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
supergoose360 said:
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
Click to expand...
Click to collapse
Did you try to flash this one...
http://www.sammobile.com/firmwares/download/82651/G925FXXS4DPG2_G925FBTU3DPD2_BTU/
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
callumbr1 said:
Did you try
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
Click to expand...
Click to collapse
Cm.bin
FAIL!
i flashed using:
PDA G925FXXU3DPDP
CSC G925FBTU3DPD2
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
supergoose360 said:
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
Click to expand...
Click to collapse
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
callumbr1 said:
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
Click to expand...
Click to collapse
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
supergoose360 said:
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
Click to expand...
Click to collapse
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number
callumbr1 said:
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Click to expand...
Click to collapse
Sorry i cannot do that. Will this be a problem?
supergoose360 said:
Sorry i cannot do that. Will this be a problem?
Click to expand...
Click to collapse
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
callumbr1 said:
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
Click to expand...
Click to collapse
It is no longer recognised by the comouter in its current state.
supergoose360 said:
It is no longer recognised by the comouter in its current state.
Click to expand...
Click to collapse
Ok i just flashed twrp recovery and now its in recovery mode and has come up on the computer.
SM-G925S
Firmware version 1.0
Not sure if i should type my serial in here.
TWRP 3.2.3 for Galaxy Grand 2 SM-G7102 (updated)
How to Install :-
*Download img file & copy to sd card
*go to recovery
*Select install
*Select img file
*Flash
*Reboot
All credit goes to twrp builder team
Hit the thanks button if u like this work
Updated recovery
V - 3.2.3
https://www.androidfilehost.com/?fid=1395089523397913506
V - 3.2.2
https://www.androidfilehost.com/?fid=1395089523397913502
V-3.2.1
img file
https://www.androidfilehost.com/?fid=1395089523397913543
Flashable zip file
https://www.androidfilehost.com/?fid=1395089523397913492
Here is odin flashable .tar file
https://www.androidfilehost.com/?fid=1395089523397913487
Alternate link -
https://drive.google.com/file/d/1ByVthZxLOQz37CTAubEglL855RmsVHLz/view?usp=sharing
No bugs??? I mean if any problem exist in TWRP 3.2.1.0?
Dharmik Jain said:
No bugs??? I mean if any problem exist in TWRP 3.2.1.0?
Click to expand...
Click to collapse
Nope its fully stable without any bugs
Sachinbansal said:
Nope its fully stable without any bugs
Click to expand...
Click to collapse
Thanks man. You guys gave grand 2 a new life again. Thanks for the latest twrp recovery for grand 2.
Nice
Is there an ODIN flashable version?
.tar
SavageDamage said:
Is there an ODIN flashable version?
.tar
Click to expand...
Click to collapse
Flash this one via odin then update the twrp
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Sachinbansal said:
Flash this one via odin then update the twrp
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Click to expand...
Click to collapse
i cant install with Odin . Error
This is Odin Log :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> twrp 3.2.1.0.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
alirezahoooy said:
i cant install with Odin . Error
This is Odin Log :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> twrp 3.2.1.0.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Flash this one first and then update it in twrp by zip or img file
https://mega.nz/#!PPhVmSYC!Dn3nlPX9IbgvxZ2PG1Qp7CSivQrIgnkItYwRDlYjB3c
Maybe you can make same TWRP for G7105-ms01lte, would be very nice.
fantomel said:
Maybe you can make same TWRP for G7105-ms01lte, would be very nice.
Click to expand...
Click to collapse
Sorry man i cant but i can tell u someone who can help u so pm me
Man!! Links are not working.. Plz update ur links...
I really need twrp for my g7102.. I'm trying to download twrp for my phone from 1 year.
Plz send a valid link.
Thank you.
Nadeemex said:
Man!! Links are not working.. Plz update ur links...
I really need twrp for my g7102.. I'm trying to download twrp for my phone from 1 year.
Plz send a valid link.
Thank you.
Click to expand...
Click to collapse
Bro links are working
No prob in the link
Big problem
Himan111999 said:
Bro links are working
No prob in the link
Click to expand...
Click to collapse
I got stuck in a big problem!!
Firstly after downloading the file.
I turned off the phone and pressed volume up +power+home key
I got a warning(u might know what is it) ⚠ screen
Then i clicked volume up so that i can flash the recovery img file but the screen showed
Downloading!!!!
I waited for 5 mins but nothg happened i just restrrted the phone and flash img file with OFFICIAL TWRP APP
And rebooted to recovery mode.. At top left corner of the screen i got showing BOOTING TO RRCOVERY
But i didn't get in twrp the phone just got restarted!!!
Now i cant even go to stock recovery. Phone gets restarted every time!!!
SUGGEST ME A WAY TO FLASH IMG THROUGH MY PHONE ITSELF WITHOUT PC
THANKS!!
:crying:
Try to flash twrp using flashify app
Deleted
Contact
Sachinbansal said:
Try to flash twrp using flashify app
Click to expand...
Click to collapse
Thanks! For concern
Nadeemex said:
Bhai!
+7731065308 mera whatsapp no. Hai. ek baar msg kardo mai aap ko sabkuch clearly samjhadunga
Ya aap apna no. Do!
Thanks! For concern
Click to expand...
Click to collapse
Msg me here on telegram
https://t.me/acharya21
acharya21 said:
Nope its fully stable without any bugs
Click to expand...
Click to collapse
Can you add a password option? Everyone can run twrp holding 3 buttons and get full access to filesystem Everyone can even brick device wiping system. It's a huge security hole, isn't it?
lek2018 said:
Can you add a password option? Everyone can run twrp holding 3 buttons and get full access to filesystem Everyone can even brick device wiping system. It's a huge security hole, isn't it?
Click to expand...
Click to collapse
I dont think that can be done in twrp for that we need red wolf recovery