Hi, I'm having a problem while charging because the phone is reading a battery low temperature, my question is if there is a way to change or simulate a battery temperature an see if the phone charge, actual temp is -20C.
thanks
Related
who controls the battery charging? Kernel? I noticed that after changing the kernel of my cell phone how to charge the battery changed as well. Prior was with 4200mV linear range is now as if by turning the battery charging.
See attachement.
hi all,
anyone knows if there is an app or a way to check what is the voltage being pumped into the s2 during charging?
i am not referring to the voltage measured on the battery as i understand that is the voltage from the battery to the phone
tx
With a supported kernel, CurrentWidget will.
Battery Version 1.0.9
That's the name of an application i am using: it shows many numbers about your battery, and makes estimations about how much time left for it to drain, and how much time is left using a specific activity till it's drained.
The application has a standard battery voltage meter, and it changes if you plug/unplug the charger, so maybe you can calculate the difference? Does it work that way?
hi bro
currentwidget can check the voltage being pumped out from wall charger to the phone?
Hi,
I have a Samsung tablet TAB 4 – SM-T530 which shows problem when charging: charging paused, battery temperature too low.
Using an app, I found out the battery temperature is shown constantly as -20°C, even when there is not charger plugged.
Do you know where the problem might be?
Do you know where the battery temperature sensor is located?
Do you know if the battery temperature can be overwritten in order to allow the charging?
One blue wire coming from the battery to the motherboard shows 0V constantly, the other blue wire 0.4V
Thank you in advance!
I have problem with my battery in Huawei Y6ii when I recovered my phone to stock rom
When battery have 94-96% battery has over 4.3v (4.326v) and when battery has 40% has only 3.6v
When I charge my battery to 100% my phone can explode or when 2% can corrupt?
Does calibration may battery explode my Y6II?
I can't check battery voltage with multimeter beacuse battery is glued to the housing
the values you getting may not be correct
normally battery it self have over/under voltage , over current protection and the device also have the same things
so there is nothing to worry about
And when I charge battery with 40% charge module has 48°C on charge temperature sensor and housing is very hot
If your battery level display is abnormal, the battery level jumps erratically or decreases very rapidly in a short period of time, follow the instructions below:
1. If your battery level display is abnormal while charging, it is recommended that you plug your charger into a different wall socket and ensure that you are using the charger that came with your phone.
2. If you are in a cold environment, the chemical activity of the battery will decrease and as a result, the battery level will display abnormally. When the temperature rises, the battery will begin to work normally again.
3. If your battery level display is abnormal at normal temperatures, try restarting your phone.
If the problem persists, back up your data and take your phone and the proof of purchase to an authorized Customer Service Center for assistance.
Tips:
The optimal working temperature for your phone is from 0°C to 35°C. Overly low or high temperatures may negatively affect the performance of the battery.