Android 5 ROM for Huawei MediaPad T1 10 - Huawei MediaPad, T-Mobile SpringBoard

Hi,
I would like to test Android 5/Lollipop on my Huawei MediaPad T1 10 but haven't found so much info on ROMs to this tablet.
Any experiences on well working Lollipop ROMs?

Anyone?

I have searched too but without luck. I would be very greatful if there was a solution to install any CM based custom rom or stock ASOP.

I second this!
Anyone, who tried it or likes to do it and post his results?

I am also.. Anyone know how to root this tablet?

agiss30 said:
I am also.. Anyone know how to root this tablet?
Click to expand...
Click to collapse
If you have the same tablet as me, Mediapad T1 10 (T1-A21W), you can easily root it with King Root.
I am also looking for information about this tablet (recovery, roms, etc) and don´t find anything. Anyone has found some development of this tablet?

I am also searching for an Lolipop Rom for this Tablet. Is it possible to install that at this Tablet?

I have been searching far and wide but it seems there is no one interested in developing anything for this pad, very much including Huawei itself. This will be my last Huawei device ever.

No custom ROMs for MediaPad T1 8.0
jocke4u said:
Hi,
I would like to test Android 5/Lollipop on my Huawei MediaPad T1 10 but haven't found so much info on ROMs to this tablet.
Any experiences on well working Lollipop ROMs?
Click to expand...
Click to collapse
I have Searched for Custom ROMs for this device and couldn't find any. I have rooted, unlocked boot loader, installed twrp recovery but couldn't find custom ROM. There are no custom roms dont rush to update to lolipop or marshmallow. wait for some time

dilipg98 said:
I have Searched for Custom ROMs for this device and couldn't find any. I have rooted, unlocked boot loader, installed twrp recovery but couldn't find custom ROM. There are no custom roms dont rush to update to lolipop or marshmallow. wait for some time
Click to expand...
Click to collapse
Where did you get the TWRP??? I was trying to compile one and then try to do development for this device. It would be very useful if you send me a link for the TWRP recovery. Then i could try to develop for this tablet.

mustang_ssc said:
Where did you get the TWRP??? I was trying to compile one and then try to do development for this device. It would be very useful if you send me a link for the TWRP recovery. Then i could try to develop for this tablet.
Click to expand...
Click to collapse
I don't know where exactly I downloaded the twrp recovery file, but I had successfully flashed it. But couldn't find the custom ROM. I installed it using sideload. let me know if you have any custom ROMs. I am a new user in this forum so i am not able to post links here drop your mail I will send you the link

dilipg98 said:
I don't know where exactly I downloaded the twrp recovery file, but I had successfully flashed it. But couldn't find the custom ROM. I installed it using sideload. let me know if you have any custom ROMs. I am a new user in this forum so i am not able to post links here drop your mail I will send you the link
Click to expand...
Click to collapse
I sent you a PM.

you need a lollipop kernal for that get source code from huawei
jocke4u said:
Hi,
I would like to test Android 5/Lollipop on my Huawei MediaPad T1 10 but haven't found so much info on ROMs to this tablet.
Any experiences on well working Lollipop ROMs?
Click to expand...
Click to collapse
thats all you need but maybe you will not get a reply from huawei

Hello, any news about how to ROOT and flash Recovery on this tablet? Also any news about new ROMS? Tabled have Snapdragon so it should be possible to use some custom ROM. OR?

hi i can´t find a rom for the tablet

sakalsk said:
Hello, any news about how to ROOT and flash Recovery on this tablet? Also any news about new ROMS? Tabled have Snapdragon so it should be possible to use some custom ROM. OR?
Click to expand...
Click to collapse
I've been trying to bring development to this tablet quite months ago but i keep struggling with the kernel source which gives me a lot of errors when trying to compile. That is the main problem that is not letting me to build for example a LineageOS 14.1 (7.1.1 ROM).
For example i think i have a solid device tree and vendor blobs to work with our tablet but the only problem is the kernel source.
About the recovery, I've ported a couple ones that boot and work. One of them is a TWRP 2.X recovery that can flash, make backups, restore and all that stuffs but the touchscreen responses weird when trying to interact with it.
The other recovery is a Phil Touch recovery, which is based on the deprecated CWM recovery. This one works without any problem but is deprecated and it won't probably be capable to flash 5.X and newer android versions, so i don't have much interest on it.
Also i tried to compile a TWRP recovery from source but again the problem is the kernel source.
Anyone who owns this tablet or want to help with this project that has a minimal experience with android development would be great if can cooperate with me to fix the issues and finally have a solid base to bring development for our device, because this device has a great potential for development and it would be sad to not be capable enjoy it.

For anyone interested:
I opened a thread for the Philz Touch custom recovery for our tablet that i ported some time ago: [url]https://forum.xda-developers.com/huawei-mediapad/development/recovery-unofficial-philz-touch-6-59-0-t3584383[/URL]
Edit: Opened another thread for general things about our device (ROMs, discussion, ...): https://forum.xda-developers.com/hu.../everything-huawei-mediapad-t1-10-t1-t3608754

Related

[Q] Cyanogen and AOKP for chinese cheap Tablets

HELLO;
it is my question and it is
A. i want to know if there is a Cyanogen or/and AOKP ROM FOR chinese cheap tablets like MAPAN MX913 or FreeLander PD60.(OFFICIAL OR UNOFFICIAL).
B. If it is how could one apply them? is there a clockworkMOD or Some other program (OFFICIAL OR UNOFFICIAL) for applying the rom. if yes WHAT is the PROGRAM?
C. what do this kind of tablets called? A10 OR ALLWINNER?
PLEASE confirm with compelet information and reference links. the idea of being a nice rom out there are eating me.
THANK YOU
Cyanogen and AOKP for chinese cheap Tablets
A. There is but there is no touch screen support yet we are waiting for some one to code it
B. Right now you can install ClockworkMod Recovery using a method on eather this site ---> androidhkmarket.co.nr or by looking on here
C. Both are the same
thank you
i must thank you.
then about clock mod is that what you are refering to: http://makeyourmart.com/fileshare/viewtopic.php?f=4&t=5
then about the problem is it only touch.
and i descover they called A13 ALLWINNER Chipsets. are you talking about that.
and do you mean this rom has touch problem but it says it as been solved. http://forum.xda-developers.com/showthread.php?t=1861445
but the problem is this: what in that thread is the download link andhow could i flash thatsupposed rom. via livesuite pack or else?
thank you for helping.
PS: DO YOU KNOW IF THIS SO CALLED ALLWINNER SUPPORT JELLY-BEAN ROMS IF ONE COULD PREAPER A CUSTOM ROM FOR THEM?
or there is a software compatibilty issue?
it is wired it is almost 3 years now i am working with linux mainly gentoo but i can figure out the android basic yet.
they said the compiling kernel is hard and i don't understand.
hanks btw
Anyone, is the a working recovey mod for Allwinner A13 tablet, if yes give a link plz
Thanks
No Cm nor aokp support any china based devices.
Wayne Tech S-III
zelendel said:
No Cm nor aokp support any china based devices.
Wayne Tech S-III
Click to expand...
Click to collapse
thanks
not no oe not ever?
what about cwm recovery for A13
xgeek.cub said:
thanks
not no oe not ever?
what about cwm recovery for A13
Click to expand...
Click to collapse
Nope They have not up to this point and most likely wont in the near future either.
There maybe a recovery done but I have not seen it here as XDA doesnt really support any china based devices.

Possible ROM/KERNEL for Mediapad 10 Link (s10-201XX)

Hey there, i was just wondering, is anybody up to the challenge of making a custom rom or even a custom kernel for this device?
This device is really underprivileged and with the right rom it would make a serious competitor against pretty much all tabllets out there with even a bigger price range (no including the really expensive ones).
The problem with it's original rom is that it doesn't take even the minimal advantage of the hardware (typical Huawei...).
So yeah, if anybody is interested in helping the owners of this device, post something here :fingers-crossed:
Thank you very much guys
tigobrata said:
Hey there, i was just wondering, is anybody up to the challenge of making a custom rom or even a custom kernel for this device?
This device is really underprivileged and with the right rom it would make a serious competitor against pretty much all tabllets out there with even a bigger price range (no including the really expensive ones).
The problem with it's original rom is that it doesn't take even the minimal advantage of the hardware (typical Huawei...).http://64.19.142.12/forum.xda-developers.com/images/smilies/fingers-crossed.gif
So yeah, if anybody is interested in helping the owners of this device, post something here :fingers-crossed:
Thank you very much guys
Click to expand...
Click to collapse
I can't personally help but yeah, I do hope there's someone out there...:fingers-crossed: I need it too
stock kernal source
tigobrata said:
Hey there, i was just wondering, is anybody up to the challenge of making a custom rom or even a custom kernel for this device?
This device is really underprivileged and with the right rom it would make a serious competitor against pretty much all tabllets out there with even a bigger price range (no including the really expensive ones).
The problem with it's original rom is that it doesn't take even the minimal advantage of the hardware (typical Huawei...).
So yeah, if anybody is interested in helping the owners of this device, post something here :fingers-crossed:
Thank you very much guys
Click to expand...
Click to collapse
what about the source of its stock kernel, can any one figure it out, if available
I assume 10 link is hopeless. I am stuck with 4.1 since Oct 2013. no more updates..
huawei mediapad 10 link updates
plsss sombody post links for mediapad 10 link android update
Can someone help me i try instal CWM on my Mediapad 10 link and have big problem with driver to windows. ADB and fastboot didn't see my tablet and i don't know what i'm doing wrong :/
can anyone have some drivers wich windows will see my tablet?
Sivy11 said:
Can someone help me i try instal CWM on my Mediapad 10 link and have big problem with driver to windows. ADB and fastboot didn't see my tablet and i don't know what i'm doing wrong :/
can anyone have some drivers wich windows will see my tablet?
Click to expand...
Click to collapse
i've tried to connect my MP10 Link via adb. Some some USB ports reporting "0123456789ABCDEF device" some (mostly USB 3.0) reports "0123456789ABCDEF offline" ... and when i reboot into fastboot, adb won't see my device...
Edit: I've found on Huawei websites firmware for S10-201wa (relased 23 January 2014, C232B002), unpacked and sucessfully flashed Boot.img and System.img via adb into my S10-201L ... now i have Questionmark instead of battery icon and no signal
Now Trying to flash back to C232B003, relased 10 September 2013 .... and it works.....
So, i think we have somethink to start with....
ententeak said:
i've tried to connect my MP10 Link via adb. Some some USB ports reporting "0123456789ABCDEF device" some (mostly USB 3.0) reports "0123456789ABCDEF offline" ... and when i reboot into fastboot, adb won't see my device...
Edit: I've found on Huawei websites firmware for S10-201wa (relased 23 January 2014, C232B002), unpacked and sucessfully flashed Boot.img and System.img via adb into my S10-201L ... now i have Questionmark instead of battery icon and no signal
Click to expand...
Click to collapse
Do you by chance have the firmware S10-201wa on your hard drive or somewhere else? Could you please kindly upload it to mediafire or something and post the link? I would be very grateful, since the firmware is not available on the Huawei site anymore.
semjase said:
Do you by chance have the firmware S10-201wa on your hard drive or somewhere else? Could you please kindly upload it to mediafire or something and post the link? I would be very grateful, since the firmware is not available on the Huawei site anymore.
Click to expand...
Click to collapse
Here is link on Huawei site
Code:
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=18332
Thank you so much, I couldn't find it anywhere!
tigobrata said:
Hey there, i was just wondering, is anybody up to the challenge of making a custom rom or even a custom kernel for this device?
This device is really underprivileged and with the right rom it would make a serious competitor against pretty much all tabllets out there with even a bigger price range (no including the really expensive ones).
The problem with it's original rom is that it doesn't take even the minimal advantage of the hardware (typical Huawei...).
So yeah, if anybody is interested in helping the owners of this device, post something here :fingers-crossed:
Thank you very much guys
Click to expand...
Click to collapse
Almost two years later but I will be looking into this I already have a working kernel, no thanks to the poor Huawei sources which are botched from the OEM.
I would like to end up with a KK / lolipop based rom at the end, the current roms crawls after a couple of added programs.
darkspr1te
darkspr1te said:
Almost two years later but I will be looking into this I already have a working kernel, no thanks to the poor Huawei sources which are botched from the OEM.
I would like to end up with a KK / lolipop based rom at the end, the current roms crawls after a couple of added programs.
darkspr1te
Click to expand...
Click to collapse
Wow finally. I was expecting EMUI 3.0 will support Mediapad 10, turns out, they left this wonderful device in the cold. This is a very good device and it will be a tragedy if there will be no custom roms for it. I will be looking forward. Thanks a lot darkspr1te. Your the man!!!
hardyorange said:
Wow finally. I was expecting EMUI 3.0 will support Mediapad 10, turns out, they left this wonderful device in the cold. This is a very good device and it will be a tragedy if there will be no custom roms for it. I will be looking forward. Thanks a lot darkspr1te. Your the man!!!
Click to expand...
Click to collapse
This is where Huawei is doomed. Lack of support for their devices like 10 link. Looking forward to darkspr1te's work.... God bless you man
Hi,
Does anyone know if darkspr1te is still working in this ROM?
Is there still on progress custom rom for this Mediapad 10 fhd? Hope wonderful inform ℹ for good news come in.. Thx for great effort
It seems that we don't see a custom ROM for Mediapad 10 link...what a pity!!!
I have a compiling kernel but not tested, i also have a few cm10/11 configs i've never used, let me push them to my github for others, i've also done a lot of reversing work on the bootloaders, again it's just documents and notes but may be handy.
Great!! Good work, Darkspr1te!! Lot of people hope you can compile a kit kat or CM 11 ROM to test...to improve our Tablet. Do you think Lollipop will be possible?
Hi, darkspr1te,
Some progress in your work with this device? Any chance to see a custom ROM in Mediapad Link?
Try this
Hello,
has anyone try this?
huawei-file.com/index.php?dir=/S_series/S10-231L

Need help to start Android Engineering

I am completely new to Android Engineering and want to learn it. Till now, I have tried building aosp oreo from repo. It is built successfully but I don't know about the use of all the folders that are downloaded by the repo. What is the use or importance of each folder in repo? Where can I learn more about this?
I have also modified my stock firmware (only removed some bloatware apps) and rebuilt the firmware. I haven't installed it yet. I used android kitchen which helped me with signing the zip but I am afraid the signature might be for testing and not the official vendor signature. I have phone with unlcoked bootloader but it's still on stock recovery. According to my knowledge, unlocking bootloader helps us to flash unofficial files but people at XDA say that we should also have custom recovery to flash custom ROMs. Should I flash the modified ROM built by me in device with stock ROM and unlocked bootloader?
My device doesn't have official TWRP support. How can I port recovery or build it from scratch for my phone?
Also, I have only modified stock ROM and need to learn porting ROMs like porting MIUI for my device. How can we port ROMs?
Sorry for asking all these at once but I tried getting answer one after another which confused me a lot. I am a noob in this field.
I read XDA thread of TWRP developer which included a guide on how to build TWRP for any device. But as the author said, that post wasn't for noobs. Maybe I need to learn a lot before I reach that level of understanding. But I don't know what to learn and from where. Please help..
And one last thing - What is a device tree? Or vendor tree? I saw these words many times when I was trying to understand the above things. But I still don't know what these are and Google doesn't help. Thank you everyone..
Hi
there is this section here https://forum.xda-developers.com/android/software
you`ll find some sticky threads of the top with plenty of info , have a look !
you may also use search and type XDA University , it will reveal also some useful links
Good luck !

Vodafone Smart Mini 7 VFD 300 custom roms wanted

Hello everyone,so i have a rooted Vodafone VFD 300 and i would like to know if there are any custom roms out there for this device? It has Android 6.0 installed and i would really like to update it to a newer Android version. Android 7,8,9 or maybe even 10 if there is anything out there. Please if there are custom roms for it,could you point me in their direction.
List of available Custom ROMs here.
Because you can see that your device isn't listed there I'm afraid no Custom ROM for it exists.
jwoegerbauer said:
List of available Custom ROMs here.
Because you can see that your device isn't listed there I'm afraid no Custom ROM for it exists.
Click to expand...
Click to collapse
Thanks,that is a pity though. I was hoping that seeing as it is a Mediatek device,it may share its platform etc with another device from another manufacturer and there may be a way to port a rom for it.

Question Where to start building a working twrp and/or roms for moto g power 2021 (borneo)?

Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Well, I have the same phone. Couldn't find ROMs for it.
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Click to expand...
Click to collapse
look in this forum here, there are a couple floating around for it, I've made one, that I was able to fully flash to mine and has touch (Android 10. there's another that is 11 on here too by another poster), but as there are multiple display options out there it seems for how they were made, that is the sticking point, as not all will behave properly when booted into a recovery like mode it seems. I have tried installing it over bootloader and it will have touch then, but when flashed to recovery the touch never activates properly. So it all likely comes to that, as we'll need combine them in, properly applying proper checks for each display type and having it use the proper driver files, since can't load them all at once or it breaks things.
Working shrp for Borneo
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Click to expand...
Click to collapse
First place to start: twrpdtgen
Read the "readme"
Also check out:
[DEV]How to compile TWRP touch recovery​
Device tree made from A10. Should still be relevant for A11.
Kernel for A10. Unfortunately I don't think Moto released the one for A11 yet. You can ask on their GitHub and devs might consider your request.
TWRP for A11. Touch is working.
Edit : here's a link for the device tree (in text) from A11
maybe this will work
thebestofall007 said:
Hello all, where would I start in making a working twrp for this phone?
Does anyone know if Motorola has released the device tree/source code for this phone so we can make the roms? LineageOS would be ideal.
Click to expand...
Click to collapse
maybe this will help probably https://github.com/MotorolaMobilityLLC/kernel-msm
UPDATE: I have a telegram account where we are discussing how to make a custom lineage OS. I'm at the gathering stage and in the process of porting a device tree. For starters I want to start with lineage OS 18 because its the same android version the stock OS is, to be on the safe side, and that I've never done ROMS before.
Moto G Power 2021
I now have a device tree with the help of AOSPdtgen from the stock ROM from mirrors.lolinet: https://github.com/thebestofall007/android_device_motorola_borneo
I have started the build and got the first error:
https://imgur.com/a/XZoqy8B
I've looked this error up and they say it's because of the ram, but the error recurs at the same point. I have 16gb of swap, too.
thebestofall007 said:
I have started the build and got the first error:
https://imgur.com/a/XZoqy8B
I've looked this error up and they say it's because of the ram, but the error recurs at the same point. I have 16gb of swap, too.
Click to expand...
Click to collapse
you need alot of ram to build a rom for android 36GB of RAM or more will be beater to it wont crash
KILLFIREY1389 said:
you need alot of ram to build a rom for android 36GB of RAM or more will be beater to it wont crash
Click to expand...
Click to collapse
The error turned out to be entries in the proprietary-files.text file that needed to be deleted.
@thebestofall007 If you'll suceed. please take in consideration to build \e\ (aka deGoogled Lineage) too.
Here's a couple of interesting links that may help:
https://doc.e.foundation/support-topics/build-e
https://community.e.foundation/t/howto-building-e-roms-a-beginners-guide/26371
Last but not least, we've also suggested them (check here) to setup a "build (V)Machine" by modding this colab notebook to made it device agnostic:
https://github.com/viam1-dev/colab_lineage_build
Hope can "inspire" you.
Thanks in advance.
Does anyone have a complete list of sources so far? I have some experience in the past building ROMs for Android 5 and I wouldn't mind trying. I have a lot of computer resources to dedicate to building as well.
Device tree: https://github.com/thebestofall007/android_device_motorola_borneo-old
Does anyone know if there is a kernel source? I looked on the Moto github and couldn't find one. Is everyone using prebuilt for the time being? Also, do we need a vendor tree?
Thanks

Categories

Resources