So hello everyone i have go clever 101 tablet and i tried to upgrade firmware and i accidentaly turned my device off when i was installing firmware and now its wont turn on screen but if i plug my usb cable to pc and if i try to turn it on my pc connects to tablet and if i try to turn it off the connection disappear so i think its still alive but i cant do anything because i cant see screen its black always so maybe i can do something to tablet via pc somehow upgrade firmware with pc programs or cmd's? sorry about my english its not good ^^
Related
Hello,
Few weeks ago I updated my Tablet to ICS with AiO-Tool by condi. Today I tried to connect my Tablet to PC to use some of the AiO-functions. But my Tablet doesn't show up in devices list in Windows. In device-manager there is no device that could be my tablet. Normally it says "Unknown device" but there is still nothing
Does anybody has the same problem or knows how to solve this? Thank you
djlars
Try to set usb debugging off. Then connect and re enable it again. If that doesn't work restart you tab in recovery mode let you pc install the driver and then reboot system. If your pc doesnt show any thing then try a other usb port on your pc last you could try is to use a device thats compitable with your tab like a camera or something but you will need the official kable from sony to connect the micro usb to normal usb...
Hello everybody,
I am new to XDA developers. I am pretty good with pc's and that kind of stuff, but I have recently bought my first android phone (Xperia P).
So i am a bit of a noob when it comes to phones.
Today I connected my phone to copy some stuff to it from my pc. Sony PC Companion popped up and I saw there was a firmware update. So i started the update, but it was thundering outside. I saw that it was still downloading the software and not installing, but I already connected my phone in wich state you can update it (you know volume button down and my phone connected to my pc) So i pulled the plug out of it thinking it would still boot up like normally, but that was not the case.
My phone won't boot up now the only thing i see now is SONY when i try to turn it on.
My phone is not rooted and my bootloader is locked.
If anyone knows how to solve this problem that would be great.
Long story short:
Pulled the plug of my usb cable out to early while updating with PC companion. Now it won't start
(Sorry for my English I am only 15 and English is not my 1st language)
If it boots to Sony logo you can download Flashtool program, install it, download latest JB firmware from P section and put it in Flashtool/Firmwares folder, start Flashtool and connect your phone with Vol- to put it in flashmode and flash official firm via flashtool.
Thanks for your help. I will see what I can do since i have absolutely no idea how to flash my phone
EDIT: Thank you very much I figured it out and it worked
Hi mates,
I have chines tablet and i touched something on rooting and since then my tablets boots only when it is connected with PC through USB, if i disconnect usb cable off tablet immediately boot icon it appears at tablet. HELP PLS?!!!
Hi all,
I am in desperate need of ya'llz help! Recently I followed the following instructions to the dot:
http://forum.xda-developers.com/showthread.php?t=2703774
in order to get root on 10.4.1.B.0.109. I ended up, like the author of the thread, in the so called bootloop. Tried everything and eventually managed to get out and restored to root 4.1.2. Thats where I am now.
The tablet works fine, however i am unable to connect to my pc with USB and also unable to charge via the charger. The tab is not detected in my computer, nor PC companion. Mass storage mode nor media mode work. I tried swapping cables, same.
The only thing I am able to get working through USB is charging when the tab is powered off, which means that the USB port is not broken.
I was thinking that updating would fix the problem, so I tried updating directly from the System update in the tab. It downloads 109, then restarts to install it, comes back with: "Could not install"!
Now my tab is not detected on my PC when its on, what to do ? How to update/Fix the USB problem!?
Any help is greatly appreciated!
Update
Ok I realized that the plugged cable only makes the red LED on the left light up, and when i click the power button, I see the battery picture in the display. Showing half charged. But the actual charge is not increasing.
Unplugging the USB, turns off the LED!
Help!
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
put your sd card in an adapter, put that in your pc and copy a zip with a full rom on it, put it back in your tablet and install the rom? Or try a different usb cable, maybe it's broken
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
hold power + Vol+ to reset device and after that try to connect to pc to flash in flashtool.
Thanx
Hi guys,
thanks for the replies. Ive tried those already. Ive tried all different types of roms. The problem is that you need a restore image such as dual recovery on the tablet. Its rooted but there is not way to install a recovery image on it, without using a computer. And since it wont connect to the PC, no way..
:/
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!