Hi,
I tried to encrypt my tablet. It becomes the Sony-Logo, then the lock-symbol, after view seconds I get the Sony logo and so on.
I wiped in TWRS with the default option, samee problem.
Then I wiped in the advanced option everything and no it hangs an the Sony-Logo.
It boots only, if I push power and volume up.
Any clue?
Greets
Midyr
Midyr said:
Hi,
I tried to encrypt my tablet. It becomes the Sony-Logo, then the lock-symbol, after view seconds I get the Sony logo and so on.
I wiped in TWRS with the default option, samee problem.
Then I wiped in the advanced option everything and no it hangs an the Sony-Logo.
It boots only, if I push power and volume up.
Any clue?
Greets
Midyr
Click to expand...
Click to collapse
Whats about a firmware flash?
Could it solve my problem?
Midyr
Midyr said:
Whats about a firmware flash?
Could it solve my problem?
Midyr
Click to expand...
Click to collapse
Yes, it did
HELP: I got the similar problem, i had been going to flash MR by myself, but when i tried to unlock it and flashed the rooted 'boot.img' extracted from 'Z4T_SGP771_AndroPlusKernel_v4.zip', i don't get the 'supersu' on the desktop properly, after tried a few times, i did a factory reset, it now hangs on boot logo, there is no response to 'power' button long pressed down, does anyone also experience this?
Midyr said:
Hi,
I tried to encrypt my tablet. It becomes the Sony-Logo, then the lock-symbol, after view seconds I get the Sony logo and so on.
I wiped in TWRS with the default option, samee problem.
Then I wiped in the advanced option everything and no it hangs an the Sony-Logo.
It boots only, if I push power and volume up.
Any clue?
Greets
Midyr
Click to expand...
Click to collapse
The only clue I got is that I remember some older AndroPlusKernel version being incompatible with the Z4's encryption option. I assume you are rooted and running the AndroPlusKernel?
I'm glad the firmware reflash at least got you back up and running.
Related
Hey guys. So I'm having trouble with my less-than-a-month-old SGP 4.2. I was using it to text people, when suddenly it freezes. None of the buttons were working so I held the power button for about 10 seconds till it shut off. I turned it back on, and now it brings me to an "Android System Recovery <3e>" menu. I turned it off, tried again, and still, it brought me to this menu. I tried all the options it listed; Rebooting System, wipe data/factory reset, and wiping the cache partition. None worked, and now I'm stuck. I don't know if it's just the firmware got corrupted somehow, or a virus got in? Anyways, if anyone could help me I'd really appreciate it.
Thanks in Advance.
FullMetaI said:
Hey guys. So I'm having trouble with my less-than-a-month-old SGP 4.2. I was using it to text people, when suddenly it freezes. None of the buttons were working so I held the power button for about 10 seconds till it shut off. I turned it back on, and now it brings me to an "Android System Recovery <3e>" menu. I turned it off, tried again, and still, it brought me to this menu. I tried all the options it listed; Rebooting System, wipe data/factory reset, and wiping the cache partition. None worked, and now I'm stuck. I don't know if it's just the firmware got corrupted somehow, or a virus got in? Anyways, if anyone could help me I'd really appreciate it.
Thanks in Advance.
Click to expand...
Click to collapse
download a firmware from this forum and flash it with odin
safariking said:
download a firmware from this forum and flash it with odin
Click to expand...
Click to collapse
I would, but I don't know how. Besides, for some reason my SGP doesn't show up after I plug it into my computer. Would I need to purchase a micro SD card and try and install it from there? Really, I was happy with GingerBread. Do you have that somewhere?
FullMetaI said:
I would, but I don't know how. Besides, for some reason my SGP doesn't show up after I plug it into my computer. Would I need to purchase a micro SD card and try and install it from there? Really, I was happy with GingerBread. Do you have that somewhere?
Click to expand...
Click to collapse
Google search or search the forums for the stock 4.2 gingerbread rom, then install samsung's mobile device drivers which you can also find by a google search or xda search. After that, start up your 4.2 in download mode by holding the power button and volume down button. Install the Samsung drivers, open up Odin, take the rom that you downloaded and put it in the PDA section, then hit flash.
Hey mates. I've updated my phone to the Russian KitKat firmware today. First it opened perfectly fine. Then I wanted to switch off to do the wipe cache and wipe data thing. I've pressed the combination volume up + home + power and the screen lighten up but after approximately 5 seconds, the phone switched off. Then I pressed off and it stucked on the Samsung screen. I couldn't switch it off and pulled out the battery. Tried to go into Odin mode, but same thing happened. Then I recharged it to full, but still the same. I can't format the phone, nor open it. Can anybody help me? Thank you very much.
Phone switching off even in download mode?
Wysłane z mojego GT-I9205 przy użyciu Tapatalka
cortex47 said:
Hey mates. I've updated my phone to the Russian KitKat firmware today. First it opened perfectly fine. Then I wanted to switch off to do the wipe cache and wipe data thing. I've pressed the combination volume up + home + power and the screen lighten up but after approximately 5 seconds, the phone switched off. Then I pressed off and it stucked on the Samsung screen. I couldn't switch it off and pulled out the battery. Tried to go into Odin mode, but same thing happened. Then I recharged it to full, but still the same. I can't format the phone, nor open it. Can anybody help me? Thank you very much.
Click to expand...
Click to collapse
Hey mate, did you ever fix your problem?
cortex47 said:
Hey mates. I've updated my phone to the Russian KitKat firmware today. First it opened perfectly fine. Then I wanted to switch off to do the wipe cache and wipe data thing. I've pressed the combination volume up + home + power and the screen lighten up but after approximately 5 seconds, the phone switched off. Then I pressed off and it stucked on the Samsung screen. I couldn't switch it off and pulled out the battery. Tried to go into Odin mode, but same thing happened. Then I recharged it to full, but still the same. I can't format the phone, nor open it. Can anybody help me? Thank you very much.
Click to expand...
Click to collapse
You will have to re-install the rom as by wiping the data that is important to the running of the rom, you wipe the Cache and the Dalvik cache only, if you can get to the download mode (odin mode) then reflash the rom, try that same button combo with the phone powered off first and see if you can get into the download mode.
Update: I have applied the USB Jig solution. The phone got into Odin Mode, but it didn't show up on the screen. The screen was black (shiny black, I knew it was on), but Odin recognized the phone. Then I reflashed the ROM, the phone restarted but it stuck on the SAMSUNG screen, however Odin said PASS. So I have gone back to square one. I still can't use the three buttons to get into Odin or Recovery Modes. I only can use USB Jig but this happens. I can't wipe data or cache. And after this operation, now my phone charges, but it doesn't show up on the screen and the notification lights don't work like it used to. What should I do know? It's clearly a software problem, but I have no idea about what to do next.
BoiBundy said:
Hey mate, did you ever fix your problem?
Click to expand...
Click to collapse
nope
Hi, i just got a bricked GT-P7500 which previously had Cyanogen nightly build on it and i was wondering how to install another firmware on it using odin, and which firmware i should install on it, i searched the forum and found the site sammobile, but it gives me a ton of results and i don't know which one i should choose , also are there any stable custom firmwares for the GT-P7500? also is there a driver for the GT-P7500?
Please help,
Thanks in advance.
Just choose by your region, and of course newest version (4.0.4)
Augiz said:
Just choose by your region, and of course newest version (4.0.4)
Click to expand...
Click to collapse
I did that, everything went ok with odin, but it seems to still be bricked, although differently now, its stuck on the boot animation, with the glowing samsung logo, its been 10 minutes at least now... what should i do? please help !
griffinx15 said:
I did that, everything went ok with odin, but it seems to still be bricked, although differently now, its stuck on the boot animation, with the glowing samsung logo, its been 10 minutes at least now... what should i do? please help !
Click to expand...
Click to collapse
Hi,
I encountered the same thing with my device. Press and hold the power button until the screen is off (device is restarting) and press power + volume down button to go into recovery. Perform the data and cache wipes and reboot the device. It should be booting into Android after that.
ZerReaper said:
Hi,
I encountered the same thing with my device. Press and hold the power button until the screen is off (device is restarting) and press power + volume down button to go into recovery. Perform the data and cache wipes and reboot the device. It should be booting into Android after that.
Click to expand...
Click to collapse
Yep i did that, it works now!
Thanks for the help everyone!
My phones loads up to home screen then reboot in about 10 seconds... Any ideas? Running EMUI 3.1/Android 5.1 beta build. was trying to revert back to stock B013 and thats when this problem started
you go back from 5.1.1 to 5.0?
I had the same Problem,after a factory reset it works again
letschky said:
you go back from 5.1.1 to 5.0?
I had the same Problem,after a factory reset it works again
Click to expand...
Click to collapse
For some reason, I can't boot into factory reset...
use ADB and Huawei update extractor to reinstall the ROM of your choice:
http://forum.xda-developers.com/showpost.php?p=56447461&postcount=17
Djiban said:
use ADB and Huawei update extractor to reinstall the ROM of your choice:
http://forum.xda-developers.com/showpost.php?p=56447461&postcount=17
Click to expand...
Click to collapse
Thanks... I will sure give this a try!
I got into FASTBOOT&RESCUE MODE..... What next? When I get to my home screen/desktop, my phone still reboots after 10 seconds so I can't do anything there... Any help would be appreciated
Steamer2499 said:
I got into FASTBOOT&RESCUE MODE..... What next? When I get to my home screen/desktop, my phone still reboots after 10 seconds so I can't do anything there... Any help would be appreciated
Click to expand...
Click to collapse
If you can goto fastboot, simply install recovery.img from UPDATE.APP(use huawei update extractor to extract img).
then copy update.app to dload folder in sd card and poweroff device.
press vol down + power button, it will boot into recovery and install UPDATE.app.
I faced this problem when from 5.1, i installed kangvipB015. it worked the way i told above.
Okay... I had my phone plugged into my usb 3.0 then I plugged the phone into my usb 2.0 port and phone started responded to my holding down volume and power buttons then phone booted up into unknown update and now everything is fine.... weird though
Huawei x2 loop
Hello. my X2 boots and reaches lockscreen, when I input my password a window comes up that says the system is not responding. After I click OK or WAIT the homescreen shows up, but after a while phone restarts and the same sequence happens again. I have tried booting into safe mode but the same thing happens. I also tried POWER plus VOL UP to clear cache. I have left the phone off and with zero battery power to simulate a battery pull. I cannot RESET however since I have valuable data on the phone which I cannot lose. Before this I was attempting to delete files by uploading to Google Photos, the phone froze so I restarted. When it booted that is when the looping began. I don't remember the version my X2 is in but since I got it I only had updated it once last year. I hope someone can help me.
Mia
Hi,
I'm having problems with my great Lumix phone, stuck in a bootloop. I got it in to ADB mode using this a thread: on another site, but cannot get further. Maybe my phone was in MTP before it got stuck in the bootloop. It definitely is running in developer mode. I am on 5.0.2 and the problem started when deinstalling Kingroot via Super Sume Pro
Does anyone know how to solve this problem? Is there a regular factory reset mode, I can't find a keycombination that will start the factory reset other than the one in the thread. If not, does anyone know how to change the mtp to adb mode?
I hope someone out there does know the answer....
ArjanC5Zip said:
Hi,
I'm having problems with my great Lumix phone, stuck in a bootloop. I got it in to ADB mode using this a thread: on another site, but cannot get further. Maybe my phone was in MTP before it got stuck in the bootloop. It definitely is running in developer mode. I am on 5.0.2 and the problem started when deinstalling Kingroot via Super Sume Pro
Does anyone know how to solve this problem? Is there a regular factory reset mode, I can't find a keycombination that will start the factory reset other than the one in the thread. If not, does anyone know how to change the mtp to adb mode?
I hope someone out there does know the answer....
Click to expand...
Click to collapse
Try the power button + volume up
And see if that boots it into recovery.
MigoMujahid said:
Try the power button + volume up
And see if that boots it into recovery.
Click to expand...
Click to collapse
Just tried, but does not go into recovery, just Lumix repeating itself. (I let go of the buttons as soon as the "starting system" was shown.
ArjanC5Zip said:
Just tried, but does not go into recovery, just Lumix repeating itself. (I let go of the buttons as soon as the "starting system" was shown.
Click to expand...
Click to collapse
Try letting go the power button only when the "lumix logo" appear, and keep holding the volume button.
unfortunately, that does not work either. I noticed that the Lumix logo only apears on the second loop; i.e: first it starts with a screen powerd by Android twice, after the second it goes to Starting system and then Lumix. Maybe that does give you/someone a clue?
ArjanC5Zip said:
unfortunately, that does not work either. I noticed that the Lumix logo only apears on the second loop; i.e: first it starts with a screen powerd by Android twice, after the second it goes to Starting system and then Lumix. Maybe that does give you/someone a clue?
Click to expand...
Click to collapse
I thought that lumix logo is the first thing that shows app.
In that case you need to let go the power button when you see the "powered by android" logo, and keep holding the volume button.
In short, release on the first thing that show up, no matter what it is..lumix logo..android logo..etc
MigoMujahid said:
I thought that lumix logo is the first thing that shows app.
In that case you need to let go the power button when you see the "powered by android" logo, and keep holding the volume button.
In short, release on the first thing that show up, no matter what it is..lumix logo..android logo..etc
Click to expand...
Click to collapse
Tnx again, but no, I'm sorry, that does not do the trick. Stays in the bootloop, no recovery choices in this way.
ArjanC5Zip said:
Tnx again, but no, I'm sorry, that does not do the trick. Stays in the bootloop, no recovery choices in this way.
Click to expand...
Click to collapse
Ok, last thing to suggest is to search google for:
"(your model number) recovery mode"
Or any other suggestions that comes in your mind, i tried doing that but "Lumix phone" didn't come out with anything related because it's not accurate.
ArjanC5Zip said:
Tnx again, but no, I'm sorry, that does not do the trick. Stays in the bootloop, no recovery choices in this way.
Click to expand...
Click to collapse
Hello mate, I have the same bootloop issue after uninstalling KingRoot. Did you fix your phone somehow?
I'm in the same boat - stuck in boot loop at "Lumix" logo. I tried Power + Volume Up/Down to no vail.