Hi Guys ,
Today i just try Stock Firmware update with odin ( SM-G925K ) it success Flashed , after that i try root my Device , seems it Was okey , but after reboot My device , i see SAMSUNG Galaxy S III GT-19305 Logo and it keep Freeze on it and my device not boot ,
For fix it What i should be ? it need Bootloader or something ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks .
iMehran said:
Hi Guys ,
Today i just try Stock Firmware update with odin ( SM-G925K ) it success Flashed , after that i try root my Device , seems it Was okey , but after reboot My device , i see SAMSUNG Galaxy S III GT-19305 Logo and it keep Freeze on it and my device not boot ,
For fix it What i should be ? it need Bootloader or something ...
Thanks .
Click to expand...
Click to collapse
Turn off your phone, and then turn it on pressing and holding Volume Up, Home, and Power button at the same time until you see a warning. Then press Volume Up to continue, and navigate using volume keys and select wipe cache/factory reset with the Home button, then reboot.
Please note that by doing this all your data will be lost.
yes i did it But same , i see that Samsung Galaxy S3 Logo and Freeze .
no idea ?
Weird issue if you can atleast get to download mode, you should then try to flash the right firmware.
Skhulile said:
Weird issue if you can atleast get to download mode, you should then try to flash the right firmware.
Click to expand...
Click to collapse
i can flash , flash complete success , but after phone reset same issue
iMehran said:
i can flash , flash complete success , but after phone reset same issue
Click to expand...
Click to collapse
Do what I suggested above, but this time instead of choosing wipe data/factory reset, choose wipe cache partition. If that doesn't work, then install again the firmware that you downloaded, and turn it on without rooting it.
i did all wipe data/factory reset and wipe cache partition on Recovery mode but not solved , i Flashed Many times , but after flash complete phone Reboot and see again that Logo and it keep on it .
iMehran said:
i did all wipe data/factory reset and wipe cache partition on Recovery mode but not solved , i Flashed Many times , but after flash complete phone Reboot and see again that Logo and it keep on it .
Click to expand...
Click to collapse
There is a custom recovery called TWRP, install that and wipe everything.
i think this issue not solved with Wipe , anyway i will try it just one question , mine Model is SM-G925K , Can i install another Firmware Like SM-G925T or L on it ?
Here is my Log for odin on Flash
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925KKKU3COK2_G925KKTC3COK2_G925KKKU2COI3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
iMehran said:
i think this issue not solved with Wipe , anyway i will try it just one question , mine Model is SM-G925K , Can i install another Firmware Like SM-G925T or L on it ?
Click to expand...
Click to collapse
No, you can't do that.
ok TWRP also not helped me i wipe every things .. in Advance dalvil cache , cache , data , interal storage , system
wipe success Complete , but same issue , Samsung Galaxy S3 Logo and not boot .
iMehran said:
ok TWRP also not helped me i wipe every things .. in Advance dalvil cache , cache , data , interal storage , system
wipe success Complete , but same issue , Samsung Galaxy S3 Logo and not boot .
Click to expand...
Click to collapse
Then install a custom ROM.
Uzair40 said:
Then install a custom ROM.
Click to expand...
Click to collapse
where can i found Custom ROM ? i must Flash it with ODIN ?
nobody can help
iMehran said:
where can i found Custom ROM ? i must Flash it with ODIN ?
Click to expand...
Click to collapse
You can find Custom ROMs here, I've read that CarHD is very good. To flash it you have to put the ROM on your SD Card and then flash it using a custom recovery.
You mean i must open phone and put rom on sd reader ? Where is rom ?
nobody can help
still Waiting for solution ...
Related
Using this post from this thread: http://forum.xda-developers.com/showthread.php?t=1825272
as i9000 said:
RESCUE FIRMWARE SGSIII I9300
This firmware is made for emergency recovery device to factory condition
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware
After flash you will have clean device (factory condition) CSC - KOR default
How to flash:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD FIRMWARE FACTORY I9300XXDLJ4
Click to expand...
Click to collapse
So I flash it on my phone using odin and it fails. Odin just goes red.
Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Why the hell are you using a pit file?
Sent from my Nexus 7 using xda premium
nodstuff said:
Why the hell are you using a pit file?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Its what the instructions said to use. But my problem is that odin wont flash anything. Not even checkrom.
ninjasstolemytv said:
Its what the instructions said to use. But my problem is that odin wont flash anything. Not even checkrom.
Click to expand...
Click to collapse
uncheck re-partition in options and dont flash the pit file.. btw looking at the odin log you seem to have flashed everything other than the pit file so try powering on your phone cuz it looks like you successfully went back to stock and only the pit file installation failed
k786 said:
uncheck re-partition in options and dont flash the pit file.. btw looking at the odin log you seem to have flashed everything other than the pit file so try powering on your phone cuz it looks like you successfully went back to stock and only the pit file installation failed
Click to expand...
Click to collapse
When I flash it there's no progress bar on the phone, so I highly doubt that it flashed anything at all.
For a simple recover you don't have to re partition your device, many bricks are just corrupted files in system partition or kernel.
Just flash any Rom you want using Odin, without partitioning.
Striatum_bdr said:
For a simple recover you don't have to re partition your device, many bricks are just corrupted files in system partition or kernel.
Just flash any Rom you want using Odin, without partitioning.
Click to expand...
Click to collapse
I think the real problem is, the device wont let Odin flahs aything
Try this guide ...
No guarantees but I flashed 2 S3's back to ICS 4.04 yesterday after Jellybean update which screws things up with Allshare Cast ...
forum.vodafone.co.uk/t5/Samsung-Galaxy-S3/How-to-Flash-Rollback-Galaxy-S3/td-p/1273246?oo=0&askid=b6988f58-c28d-4fd8-b10f-8a01b5a19979-0-uk_gsb
Worth a try !
Hi guys, i can't get past my booting screen. (yellow triangle).
I flashed this file (below) for root acces. Everything in Odin was OK.
CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.tar
But hey! It didn't get past the screen, no matter what.
I already tried to flash the siyah kernel etc. (Odin was OK again).
And when I try to flash a stock rom from sammobile it fails in Odin.
What can I do???
The sticker on the phone chassis under the battery; what does it say ?
Model: GT-I9100
SSN: -I9100GSMH
fabianbb said:
Model: GT-I9100
SSN: -I9100GSMH
Click to expand...
Click to collapse
STEP 1: Flash this using ODIN: http://stockroms.net/file/GalaxyS2/GT-i9100/ICS
STEP 2: Flash this rooted kernel: http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/CFRoot
Make sure that u tick PDA in ODIN...
ctg60000 said:
STEP 1: Flash this using ODIN: ttp://stockroms.net/file/GalaxyS2/GT-i9100/ICS
STEP 2: Flash this rooted kernel: ttp://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/CFRoot
Make sure that u tick PDA in ODIN...
Click to expand...
Click to collapse
Odin fail at step 1.
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Three things come to mind:-
1) Your NAND is stuffed. Barfing at "NAND write start' is a bit of a tell.
2) When you're doing your Odin flash, are you checking in Windoze Task Manager that Kies/any of its processes aren't running, and if they are, killing those processes ?
3) The rom/kernel packages you've downloaded could be corrupted/damaged. I had this problem when I first got my phone; at one stage I had to DL a rom from a net cafe because every package I was downloading from home ended up with a corrupt archive (files within the zip/tar missing or damaged). Try downloading a rom from a different internet connection at another location/on another network/carrier to rule this in/out.
fabianbb said:
Odin fail at step 1.
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
can u upload screenshot of the odin after selecting the ROM file
After selecting the ROM file? There's nothing special to see yet. Just the PDA is marked. (with the file name on the right.)
And just Auto Reboot and F Reset Time are marked, nothing else.
Maby it is a NAND write issue, what to do about it? And Odin fails with every rom I try. Kernels are just flashing OK.
If the NAND is stuffed, it's a motherboard replacement job. Do what I suggested; download a full rom using a different internet connection.
MistahBungle said:
If the NAND is stuffed, it's a motherboard replacement job. Do what I suggested; download a full rom using a different internet connection.
Click to expand...
Click to collapse
I don't get it? Can you explain a bit more? What do you mean with a full ROM?
The rom you downloaded from Sammobile, download it again. From another internet connection at another location.
MistahBungle said:
The rom you downloaded from Sammobile, download it again. From another internet connection at another location.
Click to expand...
Click to collapse
I don't have quick acces to another computer today, but can you explain why that should help?
fabianbb said:
I don't have quick acces to another computer today, but can you explain why that should help?
Click to expand...
Click to collapse
Because your original download may have been corrupt. He already explained when he said:
MistahBungle said:
3) The rom/kernel packages you've downloaded could be corrupted/damaged. I had this problem when I first got my phone; at one stage I had to DL a rom from a net cafe because every package I was downloading from home ended up with a corrupt archive (files within the zip/tar missing or damaged). Try downloading a rom from a different internet connection at another location/on another network/carrier to rule this in/out.
Click to expand...
Click to collapse
ctomgee said:
Because your original download may have been corrupt. He already explained when he said:
Click to expand...
Click to collapse
But my kernels are flashing ok. Is it still possible then?
EDIT:
I tried this one:
http://sourceforge.net/projects/alliancerom/files/I9100/AllianceROM-I9100-FRAOSP-ICS-RE.zip/download
also with Pit sile, still fails.
First attempt, only PDA:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second attemt, PDA + pit file (and repartition)
I think it's a problem with the NAND write?
Shall I try this?
http://forum.xda-developers.com/showthread.php?t=1457458
I really need a fix. Can I just do a factory reset or something??
Are you plugged from the phone into a port directly into a port on the computer? Not using a USB hub or a port pass-through on a keyboard or monitor? Have you tried another cable?
Why is a galaxy note listed in your pics?
theunderling said:
Why is a galaxy note listed in your pics?
Click to expand...
Click to collapse
I wondered the same thing. I then downloaded the same version of Odin, (1.87) and surprisingly it appears it is hard-coded into the header of that version.
ctomgee said:
I wondered the same thing. I then downloaded the same version of Odin, (1.87) and surprisingly it appears it is hard-coded into the header of that version.
Click to expand...
Click to collapse
This, it's hardcoded. No wrong drivers etc.
Please guys! I need a fix! ((
Service centre. Either the phone's borked or user error somewhere along the line, and this will be impossible for anyone here to pinpoint because we're not there with you.
Hi
I have searched the forum and various others but still could not solve my problem. SO please bare with me for 5 mins to read the following.
I have recently updated to Wanam's latest V5.3 XXELLA but over night it rebooted and stuck in a bootloop. so what i did was recovery wipe everything including dalvik cache BUT still stuck in bootloop. SO again i went back on the pc and flash the stock official XXELLA again bootloop again. I have found out some people might need to go into recovery and wipe everything after the official flash. BUT again still stuck in bootloop.
I honest don't remember ticking repartition but now when i try to flash ANYTHING it says the following:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have gone as far as finding PIT file from previous thread try to flash it but it just stucks at this forever:
I have tried the following 3 files from http://www.droidevelopers.com/f363/11722-[download]-ops-pit-files.html
GT-I9300_mx_20120220.zip
GT-I9300_mx_20120322.zip
GT-I9300_mx_20120329.zip
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
Please anyone if could shine a light on me on where to go. now when im in download mode this is what i see:
FACTORY MODE
PRODUCT NAME:
CUSTOMER BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
SO i have no model number and no boot and not flashable and this is all i will see when i power it up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STILL REVIVABLE?OR IS IT COMPLETELY DEAD?!
Believe this is another case of sudden death syndrome (eMMC failure)... you'll have to return it to a samsung service centre.
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
Believe this is another case of sudden death syndrome (eMMC failure)... you'll have to return it to a samsung service centre.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
is there nothing i can do apart from returning it to samsung? because the thing is i moved from uk to china and well if im being honest people here charge you for whatever they do. so you could say there is not such thing as warranty if you know what i mean. so i will want to fix it myself if possible.
if it is the sudden death syndrome, it is hardware failure, so no way to fix it yourself (not through software flashes etc) - someone else might need to confirm this, but seems to be the problem you're facing.
Sent from my GT-I9300 using Tapatalk 2
Custom rom + bootloop .
Its not dead looks like user or something has lost PIT partition .
As it stands it will fail warranty . Its not dead and download mode shows non stock firmware .
jje
so what do i need to do to revert it?
many thanks
hi! i would like to ask how's your phone? did you solve the problem of it? we have same situation i tried to flash different pit files but with no success. tried to flash official rom but it is still looking for pit file.
different pit files? flashing a wrong one kills the phone, there's nothing you can do.
I ran WLSS Stock Rom with Kernel for some time
Yesterday I updated Google Search, the phone froze -> rebooted
Sine then about 20 times the phone came up froze and shutdown
Without missing a beat I thought it was a wonderful opportunity to flash the new Stock WLSW
I kill all of the kies processes and and tried to flash and it always fails !
Tried Odin 3.04, 1.85 and even tried reverting to WLSS with the same result....
Help someone...........:crying:
Now I can ONLY go to Download mode, there is now recovery.
When I try to boot normally I get a screen the tell's me :
Firmware upgrade encountered
an issue, Please select
recovery mode in Kies & try again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin Screen Shot :
Odin log :
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Stock Rom source :
http://forum.xda-developers.com/showthread.php?t=1544487
Philz kernel source:
http://forum.xda-developers.com/showthread.php?t=1877270
For the users who search with the same symptoms TRY THIS ! :
The Issue is resolved !
The issue was resolved after replacing the USB cable !
The USB Cable did charge and transfer data but for some reason with this particular cable i wasnt able to flash !
10Q you all !
That pic on the screen means it's already in download mode (forced download mode). You need to search for Hopper8's 'Odin won't work' thread. I'd be surprised if you can't successfully flash with the info/stuff to try in that thread.
MistahBungle said:
That pic on the screen means it's already in download mode (forced download mode). You need to search for Hopper8's 'Odin won't work' thread. I'd be surprised if you can't successfully flash with the info/stuff to try in that thread.
Click to expand...
Click to collapse
if you're referring to this : http://forum.xda-developers.com/showthread.php?t=2345831
I did everything there but PIT or a costume rom/kernel....
This is the next step?
So you did everything, including the flashing of the 3 part firmware? Assuming you have an I9100 anyway.
Don't flash a pit (I'd like to say ever) but at least not now.
You can try flashing Siyah v6 as linked in the guide. I'd continue to try to flash JB leak, the 3 part firmware.
Sent from a galaxy far, far away
Hopper8 said:
So you did everything, including the flashing of the 3 part firmware? Assuming you have an I9100 anyway.
Don't flash a pit (I'd like to say ever) but at least not now.
You can try flashing Siyah v6 as linked in the guide. I'd continue to try to flash JB leak, the 3 part firmware.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Isn't the 3 part firmware is with a PIT?, i didnt try this one,
And Siyah fails also......
Code:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> zImage
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The 3 part firmware consist of : Firmware + CSC + Modem.The good is with the 3 part firmware is that it does a factory reset automatically.BTW,I've heard so many issues like this,that people on stock ROM were updating apps/browsing internet,then it suddenly froze and Odin never works.I recommend not to use Samsung firmware,or at least not 100% original.Use a custom stock ROM.and also,if siyah failed too,then I think your only options are: 3 part firmware, .PIT or nothing
GamingDj said:
The 3 part firmware consist of : Firmware + CSC + Modem.The good is with the 3 part firmware is that it does a factory reset automatically.BTW,I've heard so many issues like this,that people on stock ROM were updating apps/browsing internet,then it suddenly froze and Odin never works.I recommend not to use Samsung firmware,or at least not 100% original.Use a custom stock ROM.and also,if siyah failed too,then I think your only options are: 3 part firmware, .PIT or nothing
Click to expand...
Click to collapse
The issue was resolved after replacing the USB cable !
The USB Cable did charge and transfer data but for some reason with this particular cable i wasn't able to flash !
10Q you all !
Idan.lv said:
The issue was resolved after replacing the USB cable !
The USB Cable did charge and transfer data but for some reason with this particular cable i wasnt able to flush !
10Q you all !
Click to expand...
Click to collapse
to flush= clean toilet/wc
to flash= install firmware
As a grammar nazi I couldn't miss this one.
GamingDj said:
to flush= clean toilet/wc
to flash= install firmware
As a grammar nazi I couldn't miss this one.
Click to expand...
Click to collapse
what ever do you mean....?
thank you for the correction
Dyslexia + No a native speaker = comedy
OK, so i tried to flash parandroid and give me a error, my phone can enter download mode, but no in recovery, i tried to flash stock rom but with no luck it freeze at get pit for mapping if anyone can help it would be great, i need a good PIT file and a stock rom. thanks my s3 is 16 gb
alexmitu1234 said:
OK, so i tried to flash parandroid and give me a error, my phone can enter download mode, but no in recovery, i tried to flash stock rom but with no luck it freeze at get pit for mapping if anyone can help it would be great, i need a good PIT file and a stock rom. thanks my s3 is 16 gb
Click to expand...
Click to collapse
Try flashing the emergency recovery from here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << you will need a pit file which is in the 4.1.2 download. You will need to flash the 4.3 rom in the thread if you have at any point been on a 4.3 stock rom because of efs issues..
tallman43 said:
Try flashing the emergency recovery from here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << you will need a pit file which is in the 4.1.2 download. You will need to flash the 4.3 rom in the thread if you have at any point been on a 4.3 stock rom because of efs issues..
Click to expand...
Click to collapse
i tried it with no luck, still the same thing odin stop at get PIT for mapping
Here is what odin say:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..(here it's stay freezed and after a few minutes just fail)
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone can help?
alexmitu1234 said:
i tried it with no luck, still the same thing odin stop at get PIT for mapping
Here is what odin say:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..(here it's stay freezed and after a few minutes just fail)
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone can help?
Click to expand...
Click to collapse
Usually Complete(Write) operation failed is not a good sign and can be corrupt partitions or emmc failure. You could try changing usb ports (yes this as worked for some people) also try a different version of Odin I have always found Odin 1.85 good. To be honest it's not looking too good.
tallman43 said:
Usually Complete(Write) operation failed is not a good sign and can be corrupt partitions or emmc failure. You could try changing usb ports (yes this as worked for some people) also try a different version of Odin I have always found Odin 1.85 good. To be honest it's not looking too good.
Click to expand...
Click to collapse
i tried with Odin v 1.85 with no luck now it's just stuck at get pit for mapping it doesn't advance anymore here it's a picture with Odin:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only a couple of things left to try:
Try flashing just a BLFB bootloader (search this forum for an Odin version)
Try removing the battery once Odin is connected.
If both the above fail then you have a brick, time for a new motherboard/phone.
boomboomer said:
Only a couple of things left to try:
Try flashing just a BLFB bootloader (search this forum for an Odin version)
Try removing the battery once Odin is connected.
If both the above fail then you have a brick, time for a new motherboard/phone.
Click to expand...
Click to collapse
ok,i tried with blfb bootloader and i can enter back in the recovery,i flashed 4.1.2 with bootloader, pda, phone, csc and a PIT file almost flashed but in the end has failed now it's again like first time, only with download mode and odin stuck a get pit for mapping so i think i need a new motherbord