Actually I have downloaded the rom and tried to install as per instructions but I got an error message that this rom is not compatible this rom is for i9100 , I9100g n 2 more devices I think !!
My device is i9100 still I am unable to install this rom
goheldhruv879 said:
Actually I have downloaded the rom and tried to install as per instructions but I got an error message that this rom is not compatible this rom is for i9100 , I9100g n 2 more devices I think !!
My device is i9100 still I am unable to install this rom
Click to expand...
Click to collapse
Which recovery are you using?
noppy22 said:
Which recovery are you using?
Click to expand...
Click to collapse
CWM
Can anyone help me with HTC droid DNA Verizon. Formatted the system by mistake. Boot loader locked. No backups. Tried ruu. Shows error 155. Stuck on HTC screen. There is no is or system.
goheldhruv879 said:
CWM
Click to expand...
Click to collapse
Which version? I'm just wondering whether you are using an up to date recovery. You could try TWRP(flash the AOSP-LP kernel from HERE) then reboot to recovery and try again. Also it is worth checking the MD5 or download the rom again to make sure the .zip file is OK
Edit: Just to rule out everything which rom version are you using?
bpsingh2003 said:
Can anyone help me with HTC droid DNA Verizon. Formatted the system by mistake. Boot loader locked. No backups. Tried ruu. Shows error 155. Stuck on HTC screen. There is no is or system.
Click to expand...
Click to collapse
Wrong thread.
---------- Post added at 12:27 ---------- Previous post was at 12:26 ----------
goheldhruv879 said:
Actually I have downloaded the rom and tried to install as per instructions but I got an error message that this rom is not compatible this rom is for i9100 , I9100g n 2 more devices I think !!
My device is i9100 still I am unable to install this rom
Click to expand...
Click to collapse
This is CWM recovery bug. Try to use updated TWRP
Yeah I had similar problem with cm 11. I succeed when I first flashed 12.1 and then snapshot and then I realized this was because of recovery. With jeboo kernel 1.2 which is with philz recovery I had many of this error but with almost any other everything works fine so just flash different recovery and reboot into it.
Sent from my iPad using Tapatalk
Related
Installed MESA HYBRID 4.3 Yesterday and i am not able to install any CM10/10.1 based ROM
Whether it be PACman/CM/AOKP or the unofficial Cm10.1 by shufuking.
Everytime i try to install any rom except Stock based ICS Rom's I get a STATUS 7 error
Tried removing the first three lines from the updater script and it still dosent work
Re: Trouble installing CM10./10.1
Million threads on status 7 error, give some of them a read.
Sent from Myushi
Been there,done that
Tried everything before posting
Thats the only reason I posted it here on XDA
BTW,ICS ROMs install fine...all of em actually !
antechx said:
Been there,done that
Click to expand...
Click to collapse
You've only listed one thing you've tried, but if you have tried everything else then god knows.
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
dekanayanjyoti said:
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
Click to expand...
Click to collapse
Thanks for the help , but unfortunately this didnt helped me either...
Tried installing the ROM without Formatting the system while wiped the data and cache .
Still gives me the ****ty status 7 error .
@XperienceD - Even tried FXP 213 and MIUI 142.
Gives the same error.
Re: Trouble installing CM10./10.1
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Mysteryagr said:
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
I know that will work, but I really wanted a workaround for this :/
Switching kernels every time isn't a solution after all
You dont delete system for first instal JB
SalyczeQ said:
You dont delete system for first instal JB
Click to expand...
Click to collapse
Still gives the error :[
Got any other solutions ?
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Trzepaczka said:
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Click to expand...
Click to collapse
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
antechx said:
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
Click to expand...
Click to collapse
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
MESA also uses dual recoveries and TWRP as default.
What did he exactly meant ?
Flash another CWM on top of the pre-installed recovery ?
?? Anyone ? knows how to update CWM ?
antechx said:
?? Anyone ? knows how to update CWM ?
Click to expand...
Click to collapse
if you have unlocked bootloader, try some of the kernels which use newer cwm or twrp.
if on locked, i think xparts installs latest cwm.
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
Flash boot.img (in the zip by rom)
Install Zip
Install Gapps
Wipe data (do this first and only once and never do it again)
then flash custom kernels ..
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
TWRP has problems with our the 2011MDPI's ?
antechx said:
TWRP has problems with our the 2011MDPI's ?
Click to expand...
Click to collapse
no
---------- Post added at 09:41 PM ---------- Previous post was at 09:37 PM ----------
aftergr said:
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
Click to expand...
Click to collapse
i m using lupus twrp,no problem
i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
andreyus said:
i have a samsung galaxy s3 i9300 16gb
currently i have the cyanogenmod 10.2.0-i9300 baseband 19300UBEMH1 which its the only rom i can install on my phone
everytime i try to install a new rom i get the status 7 or status 6 error even if i tried to modify the rom so can pass the verification
any ideeas ?
thank you
Click to expand...
Click to collapse
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
andreyus said:
i have tried all cwm twrp also philz touch , also few stock firmwares and still nothing i use samsung phones for 4 years and never happened this thing
Click to expand...
Click to collapse
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
tallman43 said:
Status 7 error usually means outdated recovery try another recovery like Twrp or a newer version.
Click to expand...
Click to collapse
tallman43 said:
Strange Also I take it that you mean you have tried to alter the updater script when you modified the roms?
I would suggest to flash back to stock with Odin and start again and see if that helps sorry I can't be of much more help.
Click to expand...
Click to collapse
ive tried that for lots of times , so now im using this cm10.2 its working fine but i want to try a custom rom
anyway thanks for help mate
The recovery version must be the culprit. Why dont you install twrp from playstore? There's an app called TWTP manager. After installing twrp dont let the app reboot for you. Reboot it first then reboot into recovery the second time. Then try to install another rom
Sent from my SM-N910T using XDA Free mobile app
Hey Guys,
I am a new member on the forum ,so kindly excuse me for the noob mistakes i do.
I recently rooted my Moto E (XT 1022,dual sim,Kit Kat 4.4.4) & installed TWRP recovery) and since then I am trying to flash Custom Roms on the device.
However, my phone cannot successfully boot after the flash.It just stucks with the logo of the rom i flash with.
please help me out guys.I will be thankful.
House_stark said:
Hey Guys,
I am a new member on the forum ,so kindly excuse me for the noob mistakes i do.
I recently rooted my Moto E (XT 1022,dual sim,Kit Kat 4.4.4) & installed TWRP recovery) and since then I am trying to flash Custom Roms on the device.
However, my phone cannot successfully boot after the flash.It just stucks with the logo of the rom i flash with.
please help me out guys.I will be thankful.
Click to expand...
Click to collapse
which custom rom u flashed
[email protected] said:
which custom rom u flashed
Click to expand...
Click to collapse
I flashed cyanogen mod 12.1 and 12, and also paranoid android .but nothing helped .
House_stark said:
I flashed cyanogen mod 12.1 and 12, and also paranoid android .but nothing helped .
Click to expand...
Click to collapse
Have u downloaded all these rom for condor?
[email protected] said:
Have u downloaded all these rom for condor?
Click to expand...
Click to collapse
yes , I did.
I specifically checked the downloads again and it all says condor.
however, sometimes when i rebooted after flashing, it said that superuser is not installed.However, i already had it.
but that error only occured a few times.
are there some pre-requisites i need to meet before i flash the rom
Did you factory reset before flashing new rom? And after install just to be sure? Have you updated recovery to newest version? Did you make sure you downloaded the correct rom for your dual sim phone? Have you looked over the forum to see if anyone is having the same issue as you? Do you flash Google apps after rom? You should wait for after first boot to install Google apps. If you do these things then you shouldnt have a problem
Sent from my XT1053 using XDA Forums Pro.
House_stark said:
yes , I did.
I specifically checked the downloads again and it all says condor.
however, sometimes when i rebooted after flashing, it said that superuser is not installed.However, i already had it.
but that error only occured a few times.
are there some pre-requisites i need to meet before i flash the rom
Click to expand...
Click to collapse
get the latest twrp recovery. and follow the exact steps mentioned in the original rom thread. You should install it then successfully.
To root the phone again, just flash superuser zip after you install rom
Sent from my XT1053 using XDA Forums Pro.
Yeah updating twrp worked.thanks a ton
House_stark said:
Yeah updating twrp worked.thanks a ton
Click to expand...
Click to collapse
Yeah, I had the same problem on my condor dual sim. After flashing *any* custom rom, I tried CM12.1, Euphoria, stock android 5.1.1 (for condor) and nothing would work. I wiped everything, did try to boot several times...
This thread helped because I was using old version of TWRP. I flashed the newest. But it would still hang on boot no matter what.
So I read in another thread a format of the internal memory was necessary before reporting bugs. And it ****ing worked.
this is done in TWRP from main menu WIPE > ADVANCED > type yes.
Now I'm part of this really great group of ppl running android on their devices independently on the mercy of carriers or makers.
Thanks for making this thread, I learned from here.
bootloader-invalid signed image
I am trying to flash stock android 4.4.4 in my xt1022 through mfastboot .. But it always show an error (bootloader-invalid signed image) .. Please help
dushyant.punk said:
I am trying to flash stock android 4.4.4 in my xt1022 through mfastboot .. But it always show an error (bootloader-invalid signed image) .. Please help
Click to expand...
Click to collapse
hey. Are you using a custom recovery to do that (TWRP)?
you can read this thread to find info on that, and a bunch other stuff.
http://forum.xda-developers.com/moto-e/general/guide-one-moto-e-beginners-guide-t2807891
Sir i am just trying to downgrade my phone but it show an error while downgrading (boot loader- invalid signed image) that problem i m facing
Sent from my Moto E using XDA Forums Pro.
Hi There.
Before I start I would like you to know that I'm new here and have little experience with flashing.
I just got my OnePlus X and it came with Oxygen OS installed. I want to install Hydrogen OS on it because of its wonderful UI. I downloaded the ROM zip file from the official site. I copied the Zip and placed it in the downloads folder on my phone's internal storage, however when I try to install it from the stock recovery it always says that it failed. Can anyone please help.
Thanks
how can we help you if you don't explain a little bit more ? have you try to flash with custom recovery ?
what is the error message? try placing the file in the main directory. not the download folder.
HamFury said:
Hi There.
Before I start I would like you to know that I'm new here and have little experience with flashing.
I just got my OnePlus X and it came with Oxygen OS installed. I want to install Hydrogen OS on it because of its wonderful UI. I downloaded the ROM zip file from the official site. I copied the Zip and placed it in the downloads folder on my phone's internal storage, however when I try to install it from the stock recovery it always says that it failed. Can anyone please help.
Thanks
Click to expand...
Click to collapse
First of all you should read all the threads here, for more information on flashing and custom recovery.
For flashing a custom rom on OPX:
- unlock bootloader (you're gonna lose all your data)
- flash a custom recovery (with this you can also make backups)
- flash custom rom (flash gapps if you want)
- reboot
I repait you should read everyrhing here, because you risk to damage your phone!
RWBY said:
how can we help you if you don't explain a little bit more ? have you try to flash with custom recovery ?
Click to expand...
Click to collapse
No, its running the stock recovery, however the bootloader is unlocked.
knauji said:
what is the error message? try placing the file in the main directory. not the download folder.
Click to expand...
Click to collapse
The error message is simply: "Install Failed". I tried placing the files in the main directory (root of the internal storage) however didn't work either.
HamFury said:
No, its running the stock recovery, however the bootloader is unlocked.
Click to expand...
Click to collapse
i think you should flash it using custom recovery since you already unlock bootloader.
HamFury said:
No, its running the stock recovery, however the bootloader is unlocked.
Click to expand...
Click to collapse
You need to flash custom roms with custom recoveries only.
You cannot flash them with stock recovery.
First install TWRP recovery then flash hydrogen OS
Adesh15 said:
You need to flash custom roms with custom recoveries only.
You cannot flash them with stock recovery.
First install TWRP recovery then flash hydrogen OS
Click to expand...
Click to collapse
Does Hydrogen OS count as custom ROM?? I haven't tried but it should work with stock recovery. Since it came like this out of the box...
I might try it this weekend!
knauji said:
Does Hydrogen OS count as custom ROM?? I haven't tried but it should work with stock recovery. Since it came like this out of the box...
I might try it this weekend!
Click to expand...
Click to collapse
Since your oneplus x came with oxygen os hydrogen os counts as a custom ROM for you
You should flash it with TWRP recovery
---------- Post added at 01:24 AM ---------- Previous post was at 01:16 AM ----------
knauji said:
Does Hydrogen OS count as custom ROM?? I haven't tried but it should work with stock recovery. Since it came like this out of the box...
I might try it this weekend!
Click to expand...
Click to collapse
Check this thread. http://forum.xda-developers.com/oneplus-x/general/roms-h2os-flyme-links-dropbox-one-plus-x-t3258031
Adesh15 said:
Since your oneplus x came with oxygen os hydrogen os counts as a custom ROM for you
You should flash it with TWRP recovery
---------- Post added at 01:24 AM ---------- Previous post was at 01:16 AM ----------
Check this thread. http://forum.xda-developers.com/oneplus-x/general/roms-h2os-flyme-links-dropbox-one-plus-x-t3258031
Click to expand...
Click to collapse
mine came with Hydrogen OS. it is stock. for chinese E1001. that's why I think it should work.
knauji said:
mine came with Hydrogen OS. it is stock. for chinese E1001. that's why I think it should work.
Click to expand...
Click to collapse
Yes Hydrogen OS is stock OS for you
But what are you trying to flash then?
the OP's phone came with OOS and wants to flash H2OS. he seems to have trouble doing that with stock recovery.
I'm done flashing for now^^
Hi I have SM-G850F and trying to install the custom rom Resurrection Remix. I am getting error code 7 when flashing through twrp. I have tried everything but i am unable to solve this please somebody help me.
Rom:
https://forum.xda-developers.com/galaxy-alpha/development/rom-resurrectionremix-v5-6-0-t3277521
mobeen_farhan25 said:
Hi I have SM-G850F and trying to install the custom rom Resurrection Remix. I am getting error code 7 when flashing through twrp. I have tried everything but i am unable to solve this please somebody help me.
Rom:
https://forum.xda-developers.com/galaxy-alpha/development/rom-resurrectionremix-v5-6-0-t3277521
Click to expand...
Click to collapse
Which version of recovery do you have?
Help
piotrekkoz said:
Which version of recovery do you have?
Click to expand...
Click to collapse
3.0.3
mobeen_farhan25 said:
3.0.3
Click to expand...
Click to collapse
Have you tried downgrading to 3.0.0 or 2.8.7.0 ?
Yes
mobeen_farhan25 said:
Yes
Click to expand...
Click to collapse
Well, Error 7 is basicly to protect you from flshing the wrong software (for ex. for wrong phone model), have you tried different cm based ROMs (cyanogen mod 14 by modpunk) if you cant install them either it's something wrong with your recovery. If you haven't try it yet, you may flash it again by odin.
piotrekkoz said:
Well, Error 7 is basicly to protect you from flshing the wrong software (for ex. for wrong phone model), have you tried different cm based ROMs (cyanogen mod 14 by modpunk) if you cant install them either it's something wrong with your recovery. If you haven't try it yet, you may flash it again by odin.
Click to expand...
Click to collapse
So can u flash roms through odin?
I cant install Linoege OS for Samsung galaxy alpha it gives me the same error.
Please somebody help me to get rid of error 7
I am a noob so if anyone can solve this for me i will be grateful.
mobeen_farhan25 said:
So can u flash roms through odin?
I cant install Linoege OS for Samsung galaxy alpha it gives me the same error.
Please somebody help me to get rid of error 7
I am a noob so if anyone can solve this for me i will be grateful.
Click to expand...
Click to collapse
I meant to flash twrp in odin again, if this won't help you might try flashing official firmware and then custom recovery again.
piotrekkoz said:
I meant to flash twrp in odin again, if this won't help you might try flashing official firmware and then custom recovery again.
Click to expand...
Click to collapse
I will try