Hello Guys,
Got an android tablet (Sencor Element 8D101) from a close friend, with the message, that if fails to boot.
Indeed, when i try to switch it on, only the beginning splash screen (the word "element" in front of cloudy background) is visible, and the tablet does nothing more.
We believe it had stock 4.1.1 Jelly Bean, and as far as i know, the device was not rooted.
I read that pushing some phyiscal buttons during boot may bring up a recovery boot menu that may help. Hardreset.info said for this model, that should be Volume up + Power. Sadly i do not seem to do it right, because at best i am only getting an infinite loop of the "element" screen and big green android logo (but not the lying down android with it open chest) - but nothing resembling a menu. I tried pushing all the buttons during the android logo being visible, but nothig happened.
I got adb.exe and tried "adb wait-for-device reboot recovery", but that also does not seem to recognize the device.
Do you have some ideas or suggestions how to proceed?
Thanks in advance,
Toti
Related
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
charlieenz said:
Hi guys,
I have an Aoson M30 (rockchip 3066) and it now won't boot to the home screen.
It Just turns on to the company logo boot up screen (which is normal) but stays at this screen. It flashes the pattern over and over so the processor is obviously still running .
It should then go to the home screen but just continues to flash the boot screen.
I tried to reload the firmware but the Rockchips batch tool doesn't work either. It sees the tablet but stays at "pink" on the indicator screen. It doesn't turn green (which it needs to) so the firmware will not transfer to the tablet.
I have reset via the reset button, flattened and recharged etc but it wont start up
.
I tried booting holding the volume + and power buttons and it comes up with an image of 2 penguins? Then it shows a vertical android bot for a second before showing one lying down with a " !" symbol above it.
I guess the firmware is corrupted but without the ability to reload I fear I may have a brick!!!!
Any ideas?
Cheers
Charlie in New Zealand
Click to expand...
Click to collapse
Hi,
i had the same problem some time ago and the way I solved it was by flashing again the original rom.
Your issue might be the driver installatin on the PC to recognize the tablet as a M30. I had to use an XP to be sble to install properly the RK3066 drivers.
Also try tomuse another usb cable. The one it comes with the tablet is quite patchy and I had to use a good quañity one.
Dont give up, if you ger the endless logo loop I dont think it is bricked.
Good luck.
Just bought this as a replacement for another tablet. When I got it, the wifi would not turn on properly so I flashed this rom going through the recovery menu. Now upon booting, the screen with the android robot comes up, and then switches to a black screen with the backlight on and nothing happens. What I've tried:
-adb devices does show that it sees the devices
-abd reboot recovery results in a restart and nothing else (that I can see)
-abd reboot bootloader also results in nothing
-adb shell results in " - exec '/system/bin/sh' failed: no such file or directory (2) -"
-allowing the tablet to die and then recharging it does nothing
Trying to flash via livesuit results in device not found error, and I can't boot into recovery via the hardware buttons. Should I just give up and send it back to the manufacturer?
This tablet comes rooted. CWM is not installed. Pretty much everything I've found involves either CWM or the recovery menu, neither which I can access. Any other ideas, or is it time to give up?
HELP!!!! bricked trio stealth 4.0
Ok so I havE the exact same tablet as you and have done the exact same thing and come to the exact same finally. No luck get passed the backlit screen. Have you been able to bring yours back yet
ftkatyowser said:
Just bought this as a replacement for another tablet. When I got it, the wifi would not turn on properly so I flashed this rom going through the recovery menu. Now upon booting, the screen with the android robot comes up, and then switches to a black screen with the backlight on and nothing happens. What I've tried:
-adb devices does show that it sees the devices
-abd reboot recovery results in a restart and nothing else (that I can see)
-abd reboot bootloader also results in nothing
-adb shell results in " - exec '/system/bin/sh' failed: no such file or directory (2) -"
-allowing the tablet to die and then recharging it does nothing
Trying to flash via livesuit results in device not found error, and I can't boot into recovery via the hardware buttons. Should I just give up and send it back to the manufacturer?
This tablet comes rooted. CWM is not installed. Pretty much everything I've found involves either CWM or the recovery menu, neither which I can access. Any other ideas, or is it time to give up?
Click to expand...
Click to collapse
Thanks in advance for your help! So today I successfully rooted my Droid Razr M. I attempted to install the custom ROM Slim Bean. Unfortunately, it doesn't seem that installation completed properly and when the phone tried to reset after the installation, the fastboot screen came on and it said "boot failure." I was able (by pressing the power, volume + and volume - buttons) to get to a screen where I got a few options, one of them being
"Recovery." I clicked on this, and the screen went to an android robot lying on its back with a red triangle above it and an explanation mark (I believe this might be Android attempting to enter recovery mode). However, the phone gets stuck in this screen and I get no where.
I'm afraid I might have bricked my Razr M. Any help on where to start would be much appreciated.
Hi!
I was trying to root my "titan pc8008" tablet the other day. Being a noob i ended up screwing it up and now it when i turn it on i always gets stuck in the loading screen android os.
When it worked i managed to have adb working properly (that's how i was doing the rooting).
It never occurred to me to install cwm or make any kind of back up before tinkering with the device.
I've done some research and manage to boot into a screen with a green android laying with a red triangle over it' belly. I think this is the stock recovery.
The thing is the tablet doesn't have vol keys and the stock recovery screen doesn't show any options.
I've tried pressing all kind of combinations with the keys the tablet has but nothing happens.
Also, when im in the recovery screen i can do some adb commands like "adb reboot recovery" ,which takes me to the same screen, and "adb reboot-bootloader" which just powers off the device. "adb shell" says something about like it can't mount the file system.
How can i flash cwm (or do anything) from this point?
Btw, sorry for the long post but i wanted to give as much info as posible
btw this is all i get in the recovery screen
....//i.imgur.com/ZTpo5CC.jpg (sorry can't post links yet)
Hi, first of, this is my first post on this forum, so sorry if this is by chance in the wrong place...
Right, now the issue;
I got a Lenovo Tab A10 (model: Lenovo A7600-F. There is another set of code that goes like Lenovo A7600-F TAB A16GBE-DE)
and I have a serious feeling its bricked.
I turned it on today (at time of writing) and it gave the "Lenovo FOR THOSE WHO DO" logo like normal, and stayed like that...
forever...
So after I pushed the little white reset button besides the micro-sim slot I boot up in recovery mode by holding the volume up and power button till the black screen with the white letters pop up, and I select [Recovery Mode].
Then the Lenovo logo pops up again, and after a second or two an Android looking like he's playing very dead comes on screen with a "!" exclamation mark
above and the text "No command" under it.
I tried a reboot with the same splash screen hangning as before.
I looked up on the internet and found that clearing the cache helped a person, so I did that by pushing the power button with the dead Android and scrolled to "clear chache" with the volume buttons.
I did that, tried a reboot, but nothing happened, same result as the previous reboot.
I went as far as restoring the factory settings and rebooting but to no avail.
I go digging.
I found it could b the rom, the os or both that is totally f%#@ed up somehow and that it is in fact repairable.
Some more digging about and I find this: forum.frandroid.com/topic/203630-clockworkmod-recoveryroot-pour-lenovo-a10-70-a7600f/
Those links are very useful, because they bring me to a bunch of downloads that contain the flashing tool I need and recovery images along with a link to
Lenovo Smart Assistant. Also I can read French, so following the instructions wouldn't be a problem.
The first thing I do is connect the tab and start up Lenovo Smart Assistant (with the tab off). The computer (win8.1 Packard Bell Easynote LE) makes the chime of something
being connected, but I cannot see the device between My Computer like I normally do.
Neither does the Lenovo Smart Assistant recognise anything plugged in after a scan.
Following the instructions on how to recover with the Flash Tool also is fruitless because the Flash Tool doesn't recognise anything plugged in either.
I've now completely run out of options and don't know what to do.
Is there any way at all to save the tab and get it back up and running?