I kept on downloading the software. After 100%, it's says its installing but after that a few seconds it says "Could not verify."
Has someone experienced this also?
Can someone help to fix this?
Thanks
God bless!
have you done anything with your phone - like flashing, unlocking the bootloader?
if not, try to repeat installing.
if that does not work, try the SONY trademark thing: PCC reset of the phone.
Related
I need to know before I go to Sprint tomorrow... Thanks
(Oh, and I have a Hero)
Hard Resetting on a Official ROM, don't know if it would work.
But you could try to install some apps that needs root to work, to test if you either have it or not.
If you want to be on the safe side, download a RUU updater that installs your phone all over again.
Then it becomes like the day you bought it.
I don't think it will. If you flash an official RUU from your carrier that will get rid of it. (look on the Sprint site)
I tried that.. with this one..
http://forum.ppcgeeks.com/showthread.php?t=103776
but it would not work.. had the same problem other people had (through the comments).. but no fix was ever suggested, so I just hard reset it..
PROBLEM: "hey got a questions for anyone that could help me out. i cant get the RUU to see my Hero...? it just gives this error: "ERROR[170]: USB CONNECTION ERROR" but its conneted. and ive tried it both just plugging it in and by mounting it. but both dont work. any help would be greatly appreciated."
Does anyone know a different link to one or how to get this one to work?
http://support.sprint.com/support/a...n_your_HTC_Hero/case-gb746811-20091009-155624
Will this one work, then?
The 170 error is when the RUU updater can't get a connection to the Phone.
Have you installed HTC Sync? Or some other drivers for the Hero?
I had the same problem with the Sprint RUU download... kept telling me it wasn't connected.
Then I was messing with it and I manually pressed sync on the phone and then tried to install the RUU and it worked perfect.
So, I guess it was just that I needed to manually press sync.
Anyway, I did it.. it's on my phone... so does that mean the root is off?
If the RUU installation went fine, and finished.
Then you don't got root on your hero anymore.
lol ok.. just making sure!
Thanks for the help
No problem.
I recently received an X10 mini, but it can't seem to boot - it'll usually just remain with the SE boot logo. It was working fine before, but was kept in a drawer for a period of time till the battery was totally flat.
Sometimes it'll boot up, and display the date/time as 11:00 1 May 2011; the clock doesn't move, and the buttons are unresponsive, before it reboots and doesn't do much else again.
I've tried swapping various SIM cards, but it doesn't change anything.
I've tried installing PC Companion, and used the 'repair' feature, as well as the 'update service' software. Both of them report "No software available".
Can anyone advise if there is anything else I can do to get this phone working again?
Edited to add: I couldn't get it into 'flash' mode (green light) until I allowed the battery become totally drained first.
Use SEUS, it'll give a prompt ''you're phone seems to be up-to-date, update anyway?''
click on update anyway and then choose wipe all personal data update or something like that!
well as long as I think its a hardware issue that every electronic device suffers from when used after a long period abandonment! Best for u is to give it to customer care!
galvic said:
Use SEUS, it'll give a prompt ''you're phone seems to be up-to-date, update anyway?''
click on update anyway and then choose wipe all personal data update or something like that!
Click to expand...
Click to collapse
Unfortunately SEUS doesn't give me such a prompt.
SEUS: No new software is available for your phone. Your phone already has the latest available software installed. [Exit]
PC Companion: No software available. There is no software available for your phone yet. Please try again later. [OK]
Thats kinda odd?
There should be an option "update anyway" in SEUS?
Otherwise use bin4ry's flashtool! Google it!
So, i have this one tab which is rebooting all the time. It starts ok but after like 10 sec it freezes and reboots. And it does that again and again. Tried to reset it from recovery but it doesn't clear the device. It said that reset succeeded but nothing is wiped.
Then i tried to flash it with odin but it gives an error every time. Tried even with all 4 files and it flash it if don't pic any bootloader file to flash but it still doesn't get wiped. So is it somehow corrupted that bootloader area or smth?
Any suggestions? Or is it just gone.
Really, no help at all?? Is that bootloader damaged?
Or is bootloader locked somehow??
I have the same problem too, any body know the solution!!
It would be great to know it!
Many tahnks
hello classmates, I have a problem with my motorcycle z, it happens that I can not enter the system, and in fastboot I see a legend "failed to load kernel", I tried to install twrp but I have not been successful, I tried to install a rom and neither It worked for me, I did downgrade and neither did anyone have an idea of what I can do? I also get a message "start up failed! your device did not start up succesfully, use the software repair assistant on computer to repair device", sincerely I have not had a rooted device for a long time, I just acquired it yesterday and the seller did not tell me about it, I do not know what to do, also, sorry for my bad english
Give it back and get your cash back.
Since the seller didn't tell you the defect, he has to take it back.
Oh guys, I badly need your experties. Just as I have in the title, I have a rooted Meizu M5 Note. I rooted the phone believing that I can do much more if it is rooted. But in 6 months of trying to understand what I can do with this said rooted phone, I realized now that there are not much to do with it... Probably because of the brand, so I decided to unroot
The rooting process was from here: giving me error so if requested, i'll give the link.
I have an Android build 7.0.0.0
So here is my issue:
In the same site, I found that I can unroot.. yes, UNROOT the rooted model of phone using superSU by going to its Settings and clicking unroot (or Unroot all something..). It took a bit while, so I decided to restart the device. Yes, while SuperSU was trying to unroot my phone.
Upon restart, it now could not boot.
I allowed 30 minutes, the screen only shows Flyme logo with a spinning circle. So from here, I made up my mind to perform the factory reset/restore:
Turned off Phone > Press and hold Power key + Volume Up... until I reach the screen with options to:
-Update system.
-Wipe data.
I selected Wipe data, for it will reset the system settings. It will now show the
"Wiping data.
Please dont turn off the phone, or it may fail to boot"
It will only last for 2 seconds - and will then again reboot and stop in Flyme logo with a never ending spin below.
_________________
It was already the factory reset, which I thought should help, but it wont work.
_________________
Things I tried:
- Used ADB to flash an offcial update rom from the flymeos.com, but the ADB Flashtool would not read the device because the USB Debugging is turned OFF.
- Googling any possible solutions, but cannot find any - nor any known programs that will allow me to read the not booting phone.
- Fast boot or safe mode, which only wont proceed.
- The Recovery Menu (the un-clickable one) must be locked by the manufacturer.
Can anyone please tell me:
- Is there anyway I can access the phone's drive so I can put the Update zip folder, which will help me to use the 1st recovery option "Update system"??
- Do you have any software that can help me enable the USB debugging when the phone wont boot at all??
Thanks guys..
All the help I can get will be best appreciated.
I tried posting this to forum.FlymeOS, but no one seems to have any interest on helping.
It is now you, that i think can help.
This is my Only phone, and cant afford to lose it...
Same issue with my Meizu M5 Note. I tried a tutorial on how to unlock it's bootloader. But after going through the first step, the SP Flash tool showed some error on how it does not turn on our go recover mode or anything... In really sad
Somebody please help!
RogueDiamond195 said:
Same issue with my Meizu M5 Note. I tried a tutorial on how to unlock it's bootloader. But after going through the first step, the SP Flash tool showed some error on how it does not turn on our go recover mode or anything... In really sad
Somebody please help!
Click to expand...
Click to collapse
Looks to me that you've bricked the phone.
jwoegerbauer said:
Looks to me that you've bricked the phone.
Click to expand...
Click to collapse
Yeah... Well, atleast I can ask for new phone now! LMAO