Related
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
Hey guys,
I've been reading on forums (reading comments here and there) and getting some infos, that I need to flash a custom boot.img and xposed apk for xPosed to work on Honor 7.
Can someone get me the exact info and links where I can get the files? I've read that with Honor 7 we can get bootloop, is it fixed yet?
Also, why is the custom boot.img needed for this?
I currently have Stock ROM B380 (Android 6.0, EMUI 4) with Root and TWRP.
Thank you alot,
joaom
joaomPT said:
Hey guys,
I've been reading on forums (reading comments here and there) and getting some infos, that I need to flash a custom boot.img and xposed apk for xPosed to work on Honor 7.
Can someone get me the exact info and links where I can get the files? I've read that with Honor 7 we can get bootloop, is it fixed yet?
Also, why is the custom boot.img needed for this?
I currently have Stock ROM B380 (Android 6.0, EMUI 4) with Root and TWRP.
Thank you alot,
joaom
Click to expand...
Click to collapse
With stock firmware you will face problems. I have tried everything to make it work including custom boot and Xposed, supersu and systemless Xposed, magisk and Xposed and other stuff. It always has some problem.
Only solution as stated by @DigiGoon in his modded rom thread and verified by @HonorCasper is to use Pure Rom by DogiGoon. (I only came across this solution, may be there are others)
muradulislam said:
With stock firmware you will face problems. I have tried everything to make it work including custom boot and Xposed, supersu and systemless Xposed, magisk and Xposed and other stuff. It always has some problem.
Only solution as stated by @DigiGoon in his modded rom thread and verified by @HonorCasper is to use Pure Rom by DogiGoon. (I only came across this solution, may be there are others)
Click to expand...
Click to collapse
Hey,
Thanks for your reply. That doesnt seem to be a problem for me... 2 days ago I had to do a clean install of the stock ROM, because I had a soft-brick.
Do you know if is possible to flash that modded rom without loosing all my apps? I didnt want to install everything from zero again.
Thank you again
joaomPT said:
Hey,
Thanks for your reply. That doesnt seem to be a problem for me... 2 days ago I had to do a clean install of the stock ROM, because I had a soft-brick.
Do you know if is possible to flash that modded rom without loosing all my apps? I didnt want to install everything from zero again.
Thank you again
Click to expand...
Click to collapse
You can install any Marshmallow based ROM over your current 6.0 stock ROM, you'll not loose your apps.
Sent from my PLK-L01 using Tapatalk
joaomPT said:
Hey,
Thanks for your reply. That doesnt seem to be a problem for me... 2 days ago I had to do a clean install of the stock ROM, because I had a soft-brick.
Do you know if is possible to flash that modded rom without loosing all my apps? I didnt want to install everything from zero again.
Thank you again
Click to expand...
Click to collapse
Nope, you can dirty flash it over your existing firmware, remember to choose DigiKernel over stock kernel as that is the main thing.
Go ahead and let us know how did it go for you.
joaomPT said:
Hey guys,
I've been reading on forums (reading comments here and there) and getting some infos, that I need to flash a custom boot.img and xposed apk for xPosed to work on Honor 7.
Can someone get me the exact info and links where I can get the files? I've read that with Honor 7 we can get bootloop, is it fixed yet?
Also, why is the custom boot.img needed for this?
I currently have Stock ROM B380 (Android 6.0, EMUI 4) with Root and TWRP.
Thank you alot,
joaom
Click to expand...
Click to collapse
Custom boot.img like the one in DigiKernel, is patched for rooting and Xposed framework, in short it is made unsecure to get to work with SuperSU flashable zip, unlike the stock boot.img, so it is required to use the patched boot.img, you can also use patched stock's boot.img.
Sent from my PLK-L01 using Tapatalk
Thank you for the replies. So I gotta use patched boot.img, alright.
What do I need to flash first? Modded rom or custom boot?
1) I still get official OTA updates with modded rom? (I know if I got TWRP, I gotta flash stock recovery to install updates. is it the same with custom rom?)
2) Do I need to re-flash again SuperSU after flashing yhe new rom, or does that rom come with SU by default?
Thank you both
joaomPT said:
Thank you for the replies. So I gotta use patched boot.img, alright.
What do I need to flash first? Modded rom or custom boot?
1) I still get official OTA updates with modded rom? (I know if I got TWRP, I gotta flash stock recovery to install updates. is it the same with custom rom?)
2) Do I need to re-flash again SuperSU after flashing yhe new rom, or does that rom come with SU by default?
Thank you both
Click to expand...
Click to collapse
You can read the features on the ROM's respective threads. And all the ROMs will have patched boot.img to my knowledge.
Sent from my PLK-L01 using Tapatalk
DigiGoon said:
You can read the features on the ROM's respective threads. And all the ROMs will have patched boot.img to my knowledge.
Sent from my PLK-L01 using Tapatalk
Click to expand...
Click to collapse
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
joaomPT said:
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
Click to expand...
Click to collapse
Aroma gives u the option to install apps, install apps in system, even can pre-under and pre-over clock your cpu
joaomPT said:
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
Click to expand...
Click to collapse
After flashing the ROM flash this and then install this. Then you'll be able to use Xposed Modules.
And yes flash zip and the Aroma installer will pop up.
Good Luck!
DigiGoon said:
After flashing the ROM flash this and then install this. Then you'll be able to use Xposed Modules.
And yes flash zip and the Aroma installer will pop up.
Good Luck!
Click to expand...
Click to collapse
Hey!
I installed your ROM and flashed the xposed sdk23, but now it doesnt go past "HONOR" splashscreen.
What should I do? I already cleaned dalvik cache
Thanks!
joaomPT said:
Hello, and Thank you
Can you please confirm is this is the file I need to download after flashing your custom ROM?
http://forum.xda-developers.com/showthread.php?t=3034811
» XposedInstaller_3.1.apk «
Also, how does Aroma installer work? I never used it.
I flash the zip of your ROM, and Aroma installer pops up?
Thanks in advance!
Click to expand...
Click to collapse
You will need both installer file and framework file
HonorCasper said:
You will need both installer file and framework file
Click to expand...
Click to collapse
I already did some steps
1) Dirty flashed Pure EMUI ROM v2.2 (Worked fine)
2) flashed framework file (sdk23) > Now doesnt boot after flashing this (stuck on splashscreen)
joaomPT said:
Hey!
I installed your ROM and flashed the xposed sdk23, but now it doesnt go past "HONOR" splashscreen.
What should I do? I already cleaned dalvik cache
Thanks!
Click to expand...
Click to collapse
joaomPT said:
I already did some steps
1) Dirty flashed Pure EMUI ROM v2.2 (Worked fine)
2) flashed framework file (sdk23) > Now doesnt boot after flashing this (stuck on splashscreen)
Click to expand...
Click to collapse
Oh, yeah u flashed in wrong order mate if I where u I would reflash Pure to start over, then flash installer file and in the end u just flash framework file and then it should work but u can expect some longer boot time
HonorCasper said:
Oh, yeah u flashed in wrong order mate if I where u I would reflash Pure to start over, then flash installer file and in the end u just flash framework file and then it should work but u can expect some longer boot time
Click to expand...
Click to collapse
"Flash the installer file", is that the xposed APK or?
joaomPT said:
"Flash the installer file", is that the xposed APK or?
Click to expand...
Click to collapse
Its the One Called xposed Installer alpha 3.1 as i remember
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
joaomPT said:
"Flash the installer file", is that the xposed APK or?
Click to expand...
Click to collapse
And after that the framework file and then good to go
HonorCasper said:
Its the One Called xposed Installer alpha 3.1 as i remember
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
And after that the framework file and then good to go
Click to expand...
Click to collapse
Ok, so that's the APK . I thought I had something to "flash". an APK is only installable.
I'll try it out now
joaomPT said:
Ok, so that's the APK . I thought I had something to "flash". an APK is only installable.
I'll try it out now
Click to expand...
Click to collapse
HonorCasper said:
Its the One Called xposed Installer alpha 3.1 as i remember
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
And after that the framework file and then good to go
Click to expand...
Click to collapse
Either im being quite dumb or I dont know..
This is that I did now:
1) Dirty install Pure EMUI ROM v2.2
2) Install xposed apk 3.1
3) flash xposed framework
4) doesn't boot anymore
joaomPT said:
Either im being quite dumb or I dont know..
This is that I did now:
1) Dirty install Pure EMUI ROM v2.2
2) Install xposed apk 3.1
3) flash xposed framework
4) doesn't boot anymore
Click to expand...
Click to collapse
How Long have u waited for boot? Sorry im going to bed now, but Hope it Works, maybe a wipe og cache and dalvik after Flash og framework
---------- Post added at 11:21 PM ---------- Previous post was at 11:21 PM ----------
Otherwise i Will help u in the morning
Adapted oficial ROM with @mparus kernel
Flash this recovery ( only work whit this)
https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
Flash rom
Flash adaptation zip
Flash navbar
Flash gapps
For update ThE shame operation with wipes cache and dalvik,system
Adaptation zip
Enable navbar
ROM
https://download.lineageos.org/cherry
Bugs
Nfc
Are you maintaining official builds of lineage for G7? Does this mean that we'll be getting updates?
Enviado desde mi Moto G4 Plus mediante Tapatalk
can i flash it to g7-l11 its on android 6.0.1 and i unlocked the bootloader and install twrp 3.0.0 and root with magisk
Can you please reupload Adaptation zip and navbar somewhere, where registration is not required?
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
luistro said:
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
Click to expand...
Click to collapse
One question bro... Does the rom support F2FS?
Sent from my Moto G4 Plus using Tapatalk
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
no problema here
can you plz redownload the navbar enabling ?
can i flash it using twrp cause i have problem with philz
Folueadeux said:
can i flash it using twrp cause i have problem with philz
Click to expand...
Click to collapse
of course
GessaNNN said:
of course
Click to expand...
Click to collapse
well actually, as op mentioned it works with philz only.
i tried installing with twrp, it failed and the error message was something like this rom is not compatible with your device.
then i tried the recovery op linked, worked a charm.
mhanp said:
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
Click to expand...
Click to collapse
Hi.first register on htcmania to download files and install rom and other tools and gapp and clean cach/delvik and restart...with philz recovery...
Excuseme my english not good..
Personally, I inject an install script made by me in which there's G760-L01 as compatible device everytime I download a new nightly, then it flashes with TWRP without problems.
updated firts post
Can someone help me with an issue i have?
my headphone jack stopped working and the only way it works again is with an app called SoundAbout but i'm very tired of switching modes everytime..
is my headphone jack damaged or is it the system not correctly routing the sounds?
I've flashed many ROMs and still no fix, have to use this stupid app please help!
Hello, I was trying to install this custom rom from TWRP 2.8.7.0 but when i try to flash this file i get the following error
E3004: This package is for device : c8817d,g620s,C8817D,C8817E,G621-TL00,G620S-UL00,G620-L01,Che1-CL20,Che1-L04:
this device is .
Click to expand...
Click to collapse
along with the following error messages (that i think they are related to twrp):
E: unknown command [log]
E:Error executing updater binary in zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Error flashing zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Click to expand...
Click to collapse
I don't have that much skills in rom flashing for android (I've only flashed almost successfully another rom for a lg g7-01), so can someone please help me with this?
Thanks in advance, Spinoni31.
Edit: I decided to switch to philz and it worked. The only things that don't seem to work are the NFC, and with it, my flip cover. If soemone can help me on this matter, i would really appreciate it. Thaks, Spinoni31
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Vodes said:
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Click to expand...
Click to collapse
Magisk link please :highfive:
Alanryav said:
Magisk link please :highfive:
Click to expand...
Click to collapse
Works perfectly fine with the official Magiskv14.0.zip
NEW miui_MINote2Global_8.9.13(8.0)MIUI10 Global-Developer for twrp
Multilanguaje
FOR TWRP 8.9.6 – miui_MINote2Global_8.9.13(8.0): http://bigota.d.miui.com/8.9.13/miui_MINote2Global_8.9.13_4cc99774f3_8.0.zip
Regards
Got it via official channel
kmanilpillai said:
Got it via official channel
Click to expand...
Click to collapse
Isn't it shut down yet? That's what i see at least
Andrikkos said:
Isn't it shut down yet? That's what i see at least
Click to expand...
Click to collapse
Yes.. I got it through OTA.
Sorry for the confusion...
also
can get it through:
http://en.miui.com/getrom.php?m=yes
Installed. Works Great . Nothing better than an official stock.
Hi, I have pixel expirience installed and I got erorr when trying install this image wia TWRP:
"Updater process ended with ERROR: 7
Any ideas how to fix this?
Thanks in advance.
You need to flash fastboot rom.. will lose all your data if done.
think so..
kmanilpillai said:
You need to flash fastboot rom.. will lose all your data if done.
think so..
Click to expand...
Click to collapse
I am tried. But got another error. "Length can't be less than zero" From MiFlash.
I think this flash might require another version of firmware than my. What version is needed for this rom?
Good morning friends!
I installed Rom Beta MIUI 10 Global 8.7.5 in TWRP 3.2.2
However, the system does not boot even though I'm formatting with TWRP.
Would there be some other method for ROM to reboot?
kmanilpillai said:
You need to flash fastboot rom.. will lose all your data if done.
think so..
Click to expand...
Click to collapse
do you have any notification sound issues? It doesn't really ring when a notification arrive. And its not on silence..
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
OnlyGreen said:
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
Click to expand...
Click to collapse
MIUI10 yes...Global-Developer
Update From 9.5.4.0..? Nooooooo
Alexurso said:
Good morning friends!
I installed Rom Beta MIUI 10 Global 8.7.5 in TWRP 3.2.2
However, the system does not boot even though I'm formatting with TWRP.
Would there be some other method for ROM to reboot?
Click to expand...
Click to collapse
Can anyone help me with this question?
---------- Post added at 05:42 PM ---------- Previous post was at 05:38 PM ----------
I install MIUI 10, do the procedure by installing TWRP, restart Smatphone via TWRP, install SuperSU, format the System. But when I restart my Smartphone, it does not leave the startup screen
Can I dirty flash it over global stable?
jaran.x said:
Can I dirty flash it over global stable?
Click to expand...
Click to collapse
You will encounter some problems... The recommended way is to clean flash it
Can we flash this with miflash without unlocking bootloader?
NEW miui_MINote2Global_8.7.12(8.0)MIUI10 Download in first post
OnlyGreen said:
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
Click to expand...
Click to collapse
Not REDMI!!
Andrikkos said:
do you have any notification sound issues? It doesn't really ring when a notification arrive. And its not on silence..
Click to expand...
Click to collapse
No issues yet.. so far so good..
vcx77 said:
NEW miui_MINote2Global_8.7.12(8.0)MIUI10 Global-Developer
Multilanguaje
FOR TWRP 8.7.5 – miui_MINote2Global_8.7.12(8.0):
Regards
Click to expand...
Click to collapse
Can anybody help me ?
TWRP return errors,
1) this package is for scorpio devices, this device is " " .
2) twrp no digest file found.
Now Installed MiUI9.5 developer edition.
Hi guys,
it's not my work, i'm just sharing.
https://drive.google.com/open?id=1TSGqgarTA8yDfH0KUYSgZkGyRA_qm_vF
this is the fixed version of the TWRP from 4PDA Russian forum.
It's a very good job. Work with last EU.DEV 9.7.25 and also Stable ROM.
If you rom is encrypted : it will ask the password
if your rom is not encrypted : it will not ask any password.
It's a different one from the RED SS one or the chinese one (that we all tried because it was the 1st one available)
For noob user, there is a autoinstallation script to launch from the PC, you just have to put your phone into fastboot mode, and double click on the bat.file.
There is also the vbmeta.img.
Have a nice day!
SOURCE : https://4pda.ru/forum/index.php?showtopic=955101
nesquix said:
Hi guys,
it's not my work, i'm just sharing.
https://drive.google.com/open?id=1TSGqgarTA8yDfH0KUYSgZkGyRA_qm_vF
this is the fixed version of the TWRP from 4PDA Russian forum.
It's a very good job. Work with last EU.DEV 9.7.25 and also Stable ROM.
If you rom is encrypted : it will ask the password
if your rom is not encrypted : it will not ask any password.
It's a different one from the RED SS one or the chinese one (that we all tried because it was the 1st one available)
For noob user, there is a autoinstallation script to launch from the PC, you just have to put your phone into fastboot mode, and double click on the bat.file.
There is also the vbmeta.img.
Have a nice day!
Click to expand...
Click to collapse
Can this be used on indian global rom K20?
manan001 said:
Can this be used on indian global rom K20?
Click to expand...
Click to collapse
normaly yes
btw this recovery dont **** anything, if it just dont work, flash back your previous twrp.
Thanks a lot! it works! Knew if i waited long enough there would be a fix without me having to format everything
Yeah thanks Russian people and my girlfriend who is Russian and can read all to register a account hahaha
Works perfectly. No need to wipe data :good:
works perfectly on EU 9.7.25, OTG is Ok, great graphic, not tested the backup but thanks to the developers
regards
What the vbmeta do ? Is it necessary to flash too ?
was just trying to figure out what happened to my twrp after installing latest dev rom. all versions failed.
this one works great just as twrp should work without too many unnecessary full wipes.
thanks for pointing us to the right direction.
tlf55 said:
What the vbmeta do ? Is it necessary to flash too ?
Click to expand...
Click to collapse
Disable the verified boot.
Not needed, you can flash only the twrp.img.
@nesquix could you link the source please?
Guys,
Do we first have to install de original chinese twrp and after this russian one? Or, we may install only de russian twrp?
I asked that because i though strange that the russian twrp has the half size (30mb) of the chinese one (67mb)!!
yes and also peoples who dont use windows as OS, please make universal instalation for windows, linux and os ox.
What should I Format loading twrp and xiami eu Ron or any other custom when they'll be available ?
This work nice perfect.
Sent from my MI 6 using Tapatalk
jacobobbo said:
What should I Format loading twrp and xiami eu Ron or any other custom when they'll be available ?
Click to expand...
Click to collapse
Data, dalvik and cache = Factory reset
Guys,
Sorry, but i Still did not understand. I need First to flash the chinese (or greek) twrp and after flash this one...or, i can Just flash this twrp?
mauriciocardoso said:
Guys,
Sorry, but i Still did not understand. I need First to flash the chinese (or greek) twrp and after flash this one...or, i can Just flash this twrp?
Click to expand...
Click to collapse
Not needed, just flash this one.
Ok, thank you, my friend!
---------- Post added at 10:34 PM ---------- Previous post was at 10:26 PM ----------
Guys,
May I flash this twrp, to after that pass from my actual miui global 10.3.10 in a europe device to a Mi-globe 10.3.12?
Or, I risk to Brick something?
Anybody knows?
mauriciocardoso said:
Guys,
May I flash this twrp, to after that pass from my actual miui global 10.3.10 in a europe device to a Mi-globe 10.3.12?
Or, I risk to Brick something?
Anybody knows?
Click to expand...
Click to collapse
There should be no problem, I'd do a back up and a clean install.