[Q] Acer A700 bricked ? - Android Q&A, Help & Troubleshooting

Hi,
I have a problem with my A700 I can not solve.
At beginning, my tablet became to bootloop without reason (everything worked well so far). I was in CM 11.
I entered in recovery mode and I figured out that my internal sd card was disappeared (it was written Internal Storage 0mb).
After, I decided to flash again my rom without success.
After that, my tablet don't reboot into recovery anymore and I have only the possibility too use fastboot mode.
My tablet is recognized by fastboot but I can't flash a recovery (I have access denied error message).
Do you think that my table is dead ?
someone can help me ?
Thanks in advance and sorry for my bad english

Nobody has an idea please ?

Related

[Q] Android Q8 Tablet stuck in CWM 6.0.1.2

Greetings,
I recently acquired an Android Q8 Tablet and proceeded to successfully root it. After looking up compatible recoveries on these forums, I flashed CWM version 6.0.1.2 (turned out to be the wrong one). Now, my tablet only boots into recovery and is unable to mount anything (internal). It can't mount neither /cache nor the internal sdcard. I do believe it ought to be able to mount an external card, as there is a slot but I haven't tried it yet. ADB barely works - while it detects my device (it displays that the device is in recovery mode), any command simply results in a " <waiting for device> ". I tried the button combination to boot into download mode, but that does not work either. I'm all out of ideas - any help would be greatly appreciated!
Thanks!
Almost forgot - the tablet is running Android 4.1, and I accidentally flashed a CWM for Android 4.2. My laptop is currently running Windows 7.
Q8 rooted?
Would you post how you rooted it please? My Q8 is running 4.2.2 do you have working Win7 flash util drivers?
If you"re in recovery, It should mount an external SD, On you PC copy the correct cwm mod root.zip to the micro SD , mount the card in Q8 and re-root it.
or
This may work:
Do you have a usb debug connection and flash utility? If you do:
on your PC unzip the correct cwm root.zip file
flash the .img file from the zip to the tablet.
This worked when I bricked my Samsung t679,
Good Luck!
Shyshan said:
Greetings,
I recently acquired an Android Q8 Tablet and proceeded to successfully root it. After looking up compatible recoveries on these forums, I flashed CWM version 6.0.1.2 (turned out to be the wrong one). Now, my tablet only boots into recovery and is unable to mount anything (internal). It can't mount neither /cache nor the internal sdcard. I do believe it ought to be able to mount an external card, as there is a slot but I haven't tried it yet. ADB barely works - while it detects my device (it displays that the device is in recovery mode), any command simply results in a " <waiting for device> ". I tried the button combination to boot into download mode, but that does not work either. I'm all out of ideas - any help would be greatly appreciated!
Thanks!
Almost forgot - the tablet is running Android 4.1, and I accidentally flashed a CWM for Android 4.2. My laptop is currently running Windows 7.
Click to expand...
Click to collapse

Jiayu S3 Bricked MTK6752?

Hello guys. I need your help. I think i somehow soft bricked my dad's s3 3gb ram version.
What i have done is flashing a TWRP img. Twrp was just fine. After that i wiped and installed a rom. I think the zip was broken or something because after the processes is done twrp said there is no OS (operation system). I clicked on reboot anyway by mistake i guess...
And at this point my phone only restarts itself. I can get in FASTBOOT mode. I have the drivers and all but i dont know what can i do with the fastboot mode.. But fastboot seems stable. The phone is not restarting when it is on fasboot mode. Yet as i say again. Is there ANYTHING i can do with fastboot commands? i tried to flash a recovery twrp img it said recovery partition doesnt support flashing..
When i try to boot in recovery the phone seems to start booting to recovery but after a while it restarts itself as it does always...
I tried SP flash tool mode too. My driver is fine, i can see preloader driver on my device manager but as always phone restarts itself to boot in normal mode... If only i can stop the phone from restarting.. I have twrp backup... Or i can flash stock rom...
Please help... Any reply will be appreciated.
I mentioned my problem on the main topic of jiayu s3 but since there is so little user attention there i wanted to open a thread here as well.. Sorry if its out of rule.

Flashed wrong recovery.img - bootloop

Hello!
I have a general problem right now.
I flashed a wrong recovery.img and now my tablet is stuck in a bootloop. :crying:
I cant boot it into recovery and my pc is not recognizing it.
In device manager its visible only one second calling it unknown device.
I can not reach it with adb.
I was previously stuck in fastboot mode, because it wasnt possible to find the right fastboot interface driver. After the battery ran dry it rebooted normalyl. Hope this will be the case again.
But what if not? :crying:
Its an Allwinner a33 cheap china tablet. It will be very hard to find the correct firmware. I think, in the best case i find a very similar firmware, but want to avoid this step.
What could i try?

Vernee Apollo stuck in bootloop, what to do?

Guys, in need of desperate help here!
I've heard my friends joking that girls are not good with tech so I decided to prove them wrong by flashing a custom ROM on my newly acquired Vernee Apollo phone. Well, that ended badly - I succeeded rooting it and installing SuperSU, but I bricked it when I tried flashing a ROM so now when I turn it on it stays on the Vernee logo.
I suppose I have to open TWRP recovery and reset my phone with the backup I created earlier but I can't access it - I can only access Recovery Mode and FastBoot Mode
In FastBoot mode I try to connect the phone to my PC and get to TWRP but adb doesn't find my device anymore...
And In Recovery mode, when I try to flash the ROM, it using 'Apply update from SD card' it says 'Opening update package...' and right after that 'Installation aborted' (and my battery is almost full).
Any help is appreciated! <3

Help for zh960 china tablet

Hi to all! I bought a tablet from wish and i discover that is fake its hardware. On my tries to upgrade it i brick it. The motherboard is zh960 mb v4.1 20180508.
So i found around after lot of search this rom. I think is the same. i have install it and shows message 'boot error!!!!!!!' PC don't recognize tablet it opens recovery menu but dont work.
thank you first and sorry for my bad English.
https://drive.google.com/drive/folders/1CbOKvggktmVdU4mBq6CVnkCsyv9jcqv7
Anyone help please? also my recovery don't work. it enters into menu and when selected recovery reboot when enters normal same error screen and when enters into fastboot mode pc recognize only tablet interface and adb don't see device or unlock bootloader or other commands.
Hello
Hello,
I am struggling for a recovery.img for this tablet.
Can someone please upload one for me so i could help the 2 gentleman above by creating an image from my rom?
hi !!, i need this rom too, if any of you have this ROM please send it to this email. [email protected]

Categories

Resources