Hi all i recently installed the kg3 firmware and ever since doing so i cannot get any pc to recognise the device. i have tried in all ports and 3 pc's.
I have bought a new cable but same issue.
I tried doing a factory reset. and a reset through the manual mode.
I have reinstalled kies and uninstalled and put just the drivers on but same issue.
I think it's firmware as it happened as soon as i did the update ?
is there any way i can manually do a firmware update onto a ofial release stock if i can get it into the phones memory, I don't have a micro sd at this time?
Please help or any suggestions otherwise i may send back as faulty unit for warranty just incase the usb bit internally some how broke.
thanks in advance
Also for got to mention i tried it in usb dev mode and not
Also i tried now usb dev mode on to see of the development tools will pick it up and they also do not.
Anyway to recover the firmware on the phone with out access to usb ?
You can try flashing firmware with Odin. Read Chainfire thread in Original Development section.
Sent from GT-I9100
Do you have CWMrecovery?
If so boot into it, plug your phone in, select mounts, select mount usb storage.
If that works its firmware, if not its hardware.
If you have CWM recovery take your sd card out and copy a rom zip to it, boot into your rom, copy that rom into internal storage, reboot into CWM recovery, wipe data/cache and flash the rom from the apply zip from sd card menu item.
hi, I don't have cwmrecovery installed and it can be only installed via odin right?
In regards to ODIN i cannot get it to detect the handset to flash anything.
hi, need help rooting Alcatel t10 tab. i already tried both superoneclick and unlockroot but to no avail.
thanks
http://forum.xda-developers.com/showthread.php?t=1886460
Work for my Alcatel OT T10
:good:
unfortunately, it didn't. how did you do it?
after so many attempts, it finally did it. i have to unroot to root again. tnx
Root for Alcatel OT T10
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
are you experiencing problems with time? such as time not updating when the screen is off?
kosio2002 said:
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
Click to expand...
Click to collapse
Hi,
I have a problem with point 4 "install the drivers, ADB"
I followed this guide
http://forums.acsyndicate.net/showt...LINUX-MAC-WINDOWS-Knives-amp-Forks-v-12-02-04
but does not work
the command "adb devices" respond with "device not found"
How do you install adb driver?
Thank you
How to install Android ADB/USB Drivers
http://www.youtube.com/watch?v=6IEdJZGQVI4
---------- Post added at 11:49 PM ---------- Previous post was at 11:44 PM ----------
maglev0730 said:
are you experiencing problems with time? such as time not updating when the screen is off?
Click to expand...
Click to collapse
For me there was no problem with the clock.
If you use an application, such as HD widgets, there is a setting in the options to save the battery, then when the tablet sleep, time does not change. Check it.
:good: Thank you so much. Works!!:laugh:
the link for the adb driver seems to be down. (
maglev0730 said:
the link for the adb driver seems to be down. (
Click to expand...
Click to collapse
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
kosio2002 said:
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
Click to expand...
Click to collapse
thanks a lot! youve been a great help
---------- Post added at 05:49 AM ---------- Previous post was at 05:18 AM ----------
will this work for 32 bit windows?
driver problem
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
help
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
DMLRNDLL said:
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
Click to expand...
Click to collapse
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
giotzkie05 said:
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
Click to expand...
Click to collapse
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
kosio2002 said:
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
Click to expand...
Click to collapse
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
DMLRNDLL said:
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
Click to expand...
Click to collapse
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
kosio2002 said:
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
Click to expand...
Click to collapse
yes, i unzip the file file first then rename it with update.zip then turn off my tab via pinhole then turn it on. no dialog showede up..
thank you! it works perfect
I'm really not sure where to ask this question but I need some help so thought I'd try posting on a forum (so please forgive noobishness)
I have a Sumvision Cyclone Voyager and it doesn't seem to boot into recovery, I've tried every combination I can think of:
Power+VolUp / Power+VolDown / Power+Both / VolDown+Reset / VolUp+Reset
I've even tried using Novo7 Tools and Arctools to try and boot to recovery from software but there just doesn't seem to be one, which is strange because I've rooted the device (using Arctools - Rockchip 3066 Root), I thought all root firmware came with custom recovery? Regardless there should be a stock android recovery anyway right??
Ps. I thought I should mention that my laptop recognizes the filesystems on the tablet and even shows "Cyclone" under Device Manager>Disk Drives but neither adb nor anything else (eg SausageScript) recognise a connected device (and Yes I did enable USB Debugging)
Would a factory reset help anything?
Please help! Any suggestions would be appreciated!
Thanks
[HELP] Bootloop after flashing: recovery-clockwork-6.0.3.1-p4.zip -> NOOB!!!!
I`ve just tried everything related to this issue of the forum!!
Before the bootloop i had access to the adb and fastboot features by usb debbugging (sdk manager) and stock recovery, etc...
With the Bootloop, now i can´t access to the stock recovery with the 1001 combinations of the buttons, removing the battery, pressing the volume button and then connect to the pc via usb, adb reboot, and so on and so on.... nothing works!!
The pc only recognizes via usb the Tab (1 second) asking for MT65xxPreloader, like a bootlooping asking for this controller. I´ve installed this controller and the bootloop remains - 1 second each boot...
Anyone can help me to solve this dead brick? Is is not possible make a startup disk via sd card like exists for windows, for example??
Without PC connection i don't see the solution.....
Thanks in advance!!
Anyone can help me, plz?
I have the same problem are you solved ? thanks
hmartins02 said:
Anyone can help me, plz?
Click to expand...
Click to collapse
Thanks.
Hi
I have A1-810 with KitKat Acer_AV0K0_A1-810_RV0BRC01_WW_GEN1, with CWM recovery 6.0.5.0, received notification to update.
How can I install stock recovery to update properly.
thanks!
Hi all,
I'm trying to get my old s2 to a point where I can think about flashing one of the Lineage roms 14 or 15.
First hurdle is that i need to replace the current custom recovery (Philz 3) with TWRP. Ordinarily I'd do this through Odin and not think twice about it. However I cannot get my windows machine to recognise the USB connection to the phone. It will charge and nothing more. The phone obviously used to connect, many years ago.
Device : Samsung Galaxy sII - GT-I9100 (has root)
Recovery : Philz Touch 3 - CWM Base 6.0.1.8
OS : Jellybean 4.1.2 (stock unbranded)
PCs : Win 7 ent x64, Win 10 ent x64, Win 10 ent x64
I've scoured the forums here and have tried the following to get the usb connection working.
Tried 4 different usb cables across 3 different PCs
Tried with USB debugging on and off
The phone does not have any options to choose the type of USB connection I want (MTP etc)
Tried installing kies and drivers
Tried installing device drivers only (specifically for this model)
Tried installing device drivers (whole package)
Tried switching engineering mode to modem and back to usb through *#7284#
Tried a recovery flashable zip version of twrp 3.0, through Philz (it fails)
Tried cleaning the contacts on the port on the device.
Have stripped out the old device usb port and installed a new one.
Have tried to install mobile odin but it fails to get update (addon package from xda, and will not run)
Have tried various timings of plugging usb into the phone when entering download mode
Have factory reset the phone from OS
Have factory reset the phone from recovery
Have tried clearing the various caches and wiping pretty much everything.
The phone reliably boots into OS, recovery and download modes.
Other android and samsung devices are seen by all the PCs I've tested on
At no point are the PC and the s2 connected
Is there another way to flash twrp to recovery?
Is there another way to flash a complete stock rom including stock recovery, to start from scratch.
What else can I try? Any help greatly appreciated.
Cheers P
Ptolamy said:
(...)Is there another way to flash twrp to recovery?
Is there another way to flash a complete stock rom including stock recovery, to start from scratch.(...)
Click to expand...
Click to collapse
A safe method to start with. Place twrp-3.0.3-0-i9100-signed.zip and the recovery.img extracted from it and lineage-11-20191223-UNOFFICIAL-i9100.zip in the SD memory.
Run the current recovery and select the recovery zip or img installation from the external SD memory.
I don't know PhilZ Touch so I don't know where to choose zip or img.
Restart recovery mode and make a backup in TWRP to the external SD memory.
Only then wipe the Cache, System, Data, Dalvik and install ROM.
Many thanks. I'm gonna give that a go this evening. Will report back on how it goes.
I feel like my usb connection woes will disappear if i get a new rom on it.
Cheers.
Manages to update to Philz to version 6 ...I after which I did get the lineage Rom onto the phone but it booted once then went into a boot loop.
I gave up
Thanks for those who helped anyway though.