does anyone have a method to unbrick lg volt in dead state with usb "Qualcomm HS-USB QDLoader 9008"? I have the tot file for it and have tried BoardDiag3.99c with MSM8926 but it does not work.
Same issue here, I haven't found anything yet to fix it. Any help would be appreciated
solution
I was able to solve the problem after a long time of not been able to find a working MSM8926 flash programmer and 8926_msimage.mbn files for the phone. I post the solution here in case someone needs it. The process is below.
I use an identical working lg volt phone and extract the whole /dev/block/mmcblk0 partition of 8GB (ref http://forum.xda-developers.com/showthread.php?t=1818321) of the phone to an image file and then write the image to a 8GB microsd card using Win32DiskImager. Put the microsd card back to the phone and plug it into the usb port of my computer (need to include the battery in the phone) are enough to make the phone appear as "Qualcomm MMC Storage USB device." From there, I use MiniTool Partition Wizard to delete all existing partitions, format it temporarily as a fat32 usb device to assign a drive letter to it, and then use Win32DiskImager to write the 8GB image file of the working phone to it. When done, I'm able to revive the phone and boot it up to download mode by pressing the up volume key and hooking up the usb cable. In the download mode, I use the usual LG flash tool and the .TOT file to restore the phone.
Note: below is the image file which I use Ubuntu to format the /system, /data partitions, it still works as I test it again with the phone.
copy of the mmcblk0 image file:
https://drive.google.com/file/d/0BwA7HCSnWa5TdnhkN3lrMW04Rlk/view?usp=sharing
Can you share your backup of /dev/block/mmcblk0 partition. Thanks
------------------------------------------------------------------------------------------------
whathappened said:
I was able to solve the problem after a long time of not been able to find a working MSM8926 flash programmer and 8926_msimage.mbn files for the phone. I post the solution here in case someone needs it. The process is below.
I use an identical working lg volt phone and extract the whole /dev/block/mmcblk0 partition of 8GB (ref http://forum.xda-developers.com/showthread.php?t=1818321) of the phone to an image file and then write the image to a 8GB microsd card using Win32DiskImager. Put the microsd card back to the phone and plug it into the usb port of my computer are enough to make the phone appear as "Qualcomm MMC Storage USB device." From there, I use MiniTool Partition Wizard to delete all existing partitions, format it temporarily as a fat32 usb device to assign a drive letter to it, and then use Win32DiskImager to write the 8GB image file of the working phone to it. When done, I'm able to revive the phone and boot it up to download mode by pressing the up volume key and hooking up the usb cable. In the download mode, I use the usual LG flash tool and the .TOT file to restore the phone.
Click to expand...
Click to collapse
shawnwang said:
Can you share your backup of /dev/block/mmcblk0 partition. Thanks
------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
i have updated to include the download link for the image
As for q You did it connect to Qualcomm MMC USB Storage device need your help urgentl
As for q You did it connect to Qualcomm MMC USB Storage device need your help urgentl
explain to me my brother as you do for the volt lg desbrickear that use programs or drivers Usas
whathappened said:
I was able to solve the problem after a long time of not been able to find a working MSM8926 flash programmer and 8926_msimage.mbn files for the phone. I post the solution here in case someone needs it. The process is below.
I use an identical working lg volt phone and extract the whole /dev/block/mmcblk0 partition of 8GB (ref http://forum.xda-developers.com/showthread.php?t=1818321) of the phone to an image file and then write the image to a 8GB microsd card using Win32DiskImager. Put the microsd card back to the phone and plug it into the usb port of my computer (need to include the battery in the phone) are enough to make the phone appear as "Qualcomm MMC Storage USB device." From there, I use MiniTool Partition Wizard to delete all existing partitions, format it temporarily as a fat32 usb device to assign a drive letter to it, and then use Win32DiskImager to write the 8GB image file of the working phone to it. When done, I'm able to revive the phone and boot it up to download mode by pressing the up volume key and hooking up the usb cable. In the download mode, I use the usual LG flash tool and the .TOT file to restore the phone.
Note: below is the image file which I use Ubuntu to format the /system, /data partitions, it still works as I test it again with the phone.
copy of the mmcblk0 image file:
https://drive.google.com/file/d/0BwA7HCSnWa5TdnhkN3lrMW04Rlk/view?usp=sharing
Click to expand...
Click to collapse
Almost Giving Up
Same here searched alot.... Hoping to try this one out....
Thanks ...
failed to send programmer ..... Lg volt ls740
Related
Hi, I'm looking for original recovery image for folio so i can return my folio for warranty repair due to the "damaged internal storage" and SD card not detected problem. Other people have that problem but no one got a solution.
There was only one link from dexter
but it does not work for me (maybe due to sd card not correctly detected? sd card can be detected for some other mod though). Also when i open the zip file i notice the files types and location in the "folio stock image" is different from the mod that works on my folio.
Someone seems to have a Folio Original Recovery(apply via recovery).....how to do that actually?
Can it be fixed by fastboot (never done this and not sure what it is about actually) as done here http://forum.xda-developers.com/showthread.php?t=1012980#12482544
http://bb2k.org/folio100wiki/index.php/FolioMod_Issues#Internal_storage_give_problems_.2F_no_enough_space_.2F_internal_storage_results_damaged
If you have sd damage or something like that it must be the mbr .At the end of lost partition method 2 , use this file mbr.mbr inside zip http://www.box.net/shared/suinl2fzqb63jkqaispj with adb
Hope this can help you but you need to install sdk and adb shell on you computer with the correct folio driver to connect your tablet in fastboot
Warning if you re not sure of what you do you should not do this but if it "bricked" it Will not be worst
if you are with Windows seven sometimes it s hard to install proper driver for folio try to use pdanet to do that if you still have waiting for device in adb shell
I bought a cheap A-13 MID of the internet and flashed a firmware for another variant common problem with these devices so i have no touchscreen and the usb has snapped of tried soldering it but was unsuccessful
I have recovery installed but only way i can use it is through novotools but need touch screen
So i need a way to flash firmware through sdcard on boot (Can be done, can't find guide though)
Or a script that will run reboot-recovery.sh on boot from sd or maybe emmc
Or that will run when the sd is mounted so that if i insert an sd card into the device with reboot-recovery.sh script on it it will reboot to recovery
Must be a way to fix this
Neurom707 said:
I bought a cheap A-13 MID of the internet and flashed a firmware for another variant common problem with these devices so i have no touchscreen and the usb has snapped of tried soldering it but was unsuccessful
I have recovery installed but only way i can use it is through novotools but need touch screen
So i need a way to flash firmware through sdcard on boot (Can be done, can't find guide though)
Or a script that will run reboot-recovery.sh on boot from sd or maybe emmc
Or that will run when the sd is mounted so that if i insert an sd card into the device with reboot-recovery.sh script on it it will reboot to recovery
Must be a way to fix this
Click to expand...
Click to collapse
Uppp
hello
SM-G7102( Grand 2) SDCARD Un-Bricker Files
http://www.4shared.com/file/xaasWKQcce/SM-G7102_43_8GB_G7102XXUANE2.html​
Atf Side:
- only select SDC,
- Insert micro sd (just formatted fat 32), in M.sd reader of BIG atf or adaptor
- select you .img file
- click in "write" button, wait and when ready get out,
-------------------------------
Phone side:
1) insert Micro sd in slot of Samsung, wait a little, (5 min.s),
2) connect any Uart Cable of BOX samsung or if have the "JIG UNBRICK" in Usb port of the Samsung and waith that enter in D.Mode,
3) Download and insert Full Flash pack whith Single file, Csc.. Phone..Pda + Mx-Pit file, (this is important), in Odin or if you want, can use any Samsung BOX, (i use Odin), wait when is ready and click START,
4) Now in you phone will be write Full Fw and will be ready for use,
ISSUES:
a) in D.Mode you have Product NULL, any model showing,
b) phone know message like: "efs impossible mount itc.."
c) after too much time phone Not enter in D.Mode whith JIG UNBRICK or UART CABLE,
SOLUTION:
a1) can be that you eMMc is damaged and have need replace it, this method work only if is Sw problem no work whith HW problem, replace you eMMc,
b1) easy solve this, search and Finf FULL EFS for you model and write it whith Odin or Box Samsung that support it, (i use Odin), wait end process and you phone is alive and working,
c1) in this case, ceck: 1) if you have download and used correct sdc .img file,
2) if you have used right "size" of micro sd card" ad file .img is not wrote for half, remember that for I9300/N7100/I9500 you can use also 2gb of Msc, (for sure use 4gb), 3) reformat Msc and write other time sdc .img file and repeat full procedure, 4) to be shure that UART cable or JIG Unbrick is working, Test whith other phone, from power off connect Uart or JIG and wait 3/5 sec.s if phone goes in D.Mode, if NO, then change Uart cable or Repair Jig, never you phone damaged can enter in D.Mode if you use wrong Uart Cable or Jig Unbrick not working!!!!
If you device NOT respond for nothingh after all these steps, please ceck you HW problem, short circuit, Power ic, Usb connector itc... shure you device have other type of problems....
Best regards
You can not use this file coz u need to have atf to flash and extract this sdc file to your sd card.
Sent from my MT11i using XDA Premium 4 mobile app
microchip88 said:
You can not use this file coz u need to have atf to flash and extract this sdc file to your sd card.
Sent from my MT11i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This file is ready
It is through the program ATF
Copy it to your memory card and try
But I expect that you need to USB Jig
You dont get it.. The file is .SDC secure digital container and its encrypted with security key. Only atf tool and program can extract and write the dump image to sdcard.
Sent from my MT11i using XDA Premium 4 mobile app
I have an iBall Slide i701 running Windows 10. So, I wanted to try RemixOS on my tablet after seeing a thread on some site. So, I downloaded the zip and tried to use the USB option but my USB was not detected at all. I tried everything like formatting the pendrive to different formats, but still no luck. Then, I tried the Hard Disk installation, but here's the problem. My tablet has 16GB of internal storage of which right now about 7GB is free (which isn't enough to repartition). But, I do have a 16GB SD Card on the tablet but it's being shown as Secure SD Storage and I am unable to create a normal bootable partition with the SD Card. So, when I try the hard disk installation option, the SD Card doesn't show up among the hard drives, instead it shows among USB. Anyways, I tried USB installation to the SD Card, but it won't boot into the USB though I have set UEFI as boot option #1 and disabled secure boot.
Please help me out!
Well i have tried everything from booting linux to win7 win 8.1 installers with and without efi installers it just doesn't boot from any flash drive. There is a lock in the bios on boot option that forces it to boot from internal and yes i also tried via its sd slot, the prob is the sd card can only be accessed after it boots up, so thats a bummer,
vistatech9895927087 said:
I have an iBall Slide i701 running Windows 10. So, I wanted to try RemixOS on my tablet after seeing a thread on some site. So, I downloaded the zip and tried to use the USB option but my USB was not detected at all. I tried everything like formatting the pendrive to different formats, but still no luck. Then, I tried the Hard Disk installation, but here's the problem. My tablet has 16GB of internal storage of which right now about 7GB is free (which isn't enough to repartition). But, I do have a 16GB SD Card on the tablet but it's being shown as Secure SD Storage and I am unable to create a normal bootable partition with the SD Card. So, when I try the hard disk installation option, the SD Card doesn't show up among the hard drives, instead it shows among USB. Anyways, I tried USB installation to the SD Card, but it won't boot into the USB though I have set UEFI as boot option #1 and disabled secure boot.
Please help me out!
Click to expand...
Click to collapse
hello, ive had similar problems with the iball marvel 6 and ive contacted iball for it and they sent me this email
With reference to your below mail, iBall compbook Marvel 6 comes with pre-installed OS 64 bit Windows 10 Home Ver. Customer cannot Upgrade or downgrade the OS through online or with any other external devices. Compbook works on tablet technology it will not support any other OS except the OS which is preinstalled in it, therefore there is no any separate drivers available for that..
i dont know if this is similar to yours but your slide also works on tablet technology so it might be the crux of the problem.
It is possible to load from USB
I had the same problem with my iball i701, during win10 upgrade it went into blank screen of death. Heres what i did.
0. Make efi shell as first boot in bios.
1. Go into efi shell, type map. It lists the drives, usb is not listed.
2. Unplug usb, type map -r
3. Plug in usb drive (my usb was win10 efi bootable drive), type map -r
4. Voila now the last entry is usb drive.
5. Type reset, press esc to go into bios. Usb is now listed in boot options.
Done.
As title suggest I was rooted unlocked boot loader and accidentally formatted it the internal storage to fat32 using the aparted tool i clicked on the wrong partition and wiped the internal instanal storage card to fat32 it now refuses to connect hisuite adb fastboot you name it anyone know of a way to reformat the internal storage and get any type of recovery twrp or erecocery on there to restore an os partitions again .
I've got Linux as I heard Linux utilities c an reformat the partitions the real problem is when i plug the phone in it beeps meaning its connecting in hi-suite but nothing comes up I've tried to adb fastboot connect to the phone neither tool works any ideas?
The phone light doesn't show a charge light either and no screen comes up at all on the phone its blank despite the beeping meaning its still alive!
Button combos don't work the screen is totally showing nothing yet it still beeps on connecting
Please help as this is becoming a major issues not having a phone
Regards Muzzer
Suggestions
Tried dload forced method on windows 7 64bit the phone shows up as USB ser drivers are installed too even beeps on connecting someone know how to put an erecovery on there or twrp anyway to format the internal storage through adb or faatboot it won't come up as a device in Windows I use Linux too any ideas please
How do you got the Unlock code?
Buy a code from a website there is threads on how to get them use search
Does anyone know how to repartition a blank internal storage using Linux or Windows when the device is not working properly through says device null not found