Related
Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
Hi guys, I have a st17i bricked phone, it won't boot, when I connect it to usb it is recognized as mpc and not msc, so it can't enter in flashmode. Can someone help me here? Thanks in advance
Have you unlocked bootloader or something? How did you bricked your phone, I need more informations..
Sent from my WT19i using XDA
tenea said:
Hi guys, I have a st17i bricked phone, it won't boot, when I connect it to usb it is recognized as mpc and not msc, so it can't enter in flashmode. Can someone help me here? Thanks in advance
Click to expand...
Click to collapse
Are you reffering to MTP?
What you you done before getting this issue?
Sent from my ST17i using Tapatalk
Thanks for responses, frankly I don't know what happend to it, it came to me already broken, trying to flash but it won't enter it in msc mode (@ puppet13th: yes, I was reffering to mtp), and I don't know how to switch to msc because it doesn't boot. Thanks a lot for your help
Is there a way to switch it to msc with adb push or something? Anyone can help me?
Sent from my LG-P500 using Tapatalk
Enter flashmode for flashtool
Hey....i don't think you need to switch it to MSC mode for flashing.... did you try to enter flashmode by holding "Volume down" button while inserting the USB cable into the phone ? Are you trying to flash it via Flashtool ( it is the easiest way ) ?
crazy_4_and1 said:
Hey....i don't think you need to switch it to MSC mode for flashing.... did you try to enter flashmode by holding "Volume down" button while inserting the USB cable into the phone ? Are you trying to flash it via Flashtool ( it is the easiest way ) ?
Click to expand...
Click to collapse
Yes, I tried to flash it with flashtool, but it won't recognize the phone, holding volume down while inserting usb, and the mini led light up orange, so... what else can I do? .. thanks
Did You switch the phone off before that?
Procedure is:
1) Switch off the phone (remove battery if needed)
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Yes, I did exactly the same, but it doesn't install the drivers
Sent from my LG-P500 using Tapatalk
Then You need to install either Sony PC companion or form the Sony develeoper site the proper drivers.
Sony PC Companion You find here
Pc companion will install all the SE xperia drivers You need.
tenea said:
Yes, I did exactly the same, but it doesn't install the drivers
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
You have drivers in Flashtool folder under : \flashtool\drivers install them , and accept all of the installation requests by Windows . Or install official drivers from Sony or from Google's SDK source .
:Flash a new kernel via FASTBOOT and install a rom or reflash the firmware with wotan client that worked for me
---------- Post added at 07:43 PM ---------- Previous post was at 07:37 PM ----------
zariin said:
Did You switch the phone off before that?
Procedure is:
1) Switch off the phone (remove battery if needed)
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Click to expand...
Click to collapse
I did it like this: connect phone in fastboot mode, then i installed the drivers manually when this is not working plug out your phone install PDA net on your computer, connect your phone in fast boot mode and the program will install the drivers
Sorry for my bad english
when you plug in your usb while holding volume down key the led should be green not orange.
green led means the phone is in flashmode.
Hi Guys i have this same problem whith my Xperia Active, when i on the tell its only vibrate.... i flashing this phone whith flashtool and new fw but still bricked , please help me!!
remove battery and put it again .... thn try to enter flashmode ... thn flash whatever you want.
prateek_gemini said:
remove battery and put it again .... thn try to enter flashmode ... thn flash whatever you want.
Click to expand...
Click to collapse
hi this not help ,any idea?
This may help you 90%... just try it
I also have bricked up my Xperia Neo V
I tried many tools but no one helped.....
Finally I got back my bricked phone back by doing following things....
download all the needed things you need to update phone with wotan X tool unlock, you will need
1. X_Unlock_Tool_Setup_Wotan
2. WotanClient
3. USBFlashDriver
you can get all these from wotan website.
also create an account on wotan website. NO NEED TO BUY ANY CREDITS
install all above mentioned tools.
then run X UNLOCK TOOL
then follow on screen instructions untill you get an error that you don't have sufficient credits.
NOTE THAT NOW YOUR PHONE HAS GOT A SIM LOCK CERTIFICATE FROM THIS TOOL. BUT THE POSITIVE ASPECT IS THAT YOU CAN NOW FLASH ANY ftf FILE USING FLASH TOOL. SIM LOCK WILL BE REMOVED AFTER THE WHOLE PROCESS.
now flash the desired firmware on your phone.
power up your phone
if it power ups successfully, then your phone will not detect your SIM card.
finally use S1 tool to remove SIM LOCK CERTIFICATE.
CLICK THANKS IF IT WORKS
BEST OF LUCK
Same issue
I am using an Unlocked Bootloader Xperia Ray and it got bricked when I tried to flash in Cyanogen mod 7 for Xperia Ray...
Now I am trying to flash stock roms using Flashtool but it is requiring me to be in Flasmode which obviously I can't do it. I have done the steps but it wont recognize my phone.
I am also trying to figure how to flash a kernel but every kernel that I download comes in an *.img format but FLASH TOOLs require FTF file to flash the kernel.. how can I do it?
spoinkyness said:
I am using an Unlocked Bootloader Xperia Ray and it got bricked when I tried to flash in Cyanogen mod 7 for Xperia Ray...
Now I am trying to flash stock roms using Flashtool but it is requiring me to be in Flasmode which obviously I can't do it. I have done the steps but it wont recognize my phone.
I am also trying to figure how to flash a kernel but every kernel that I download comes in an *.img format but FLASH TOOLs require FTF file to flash the kernel.. how can I do it?
Click to expand...
Click to collapse
Use fastboot mode instead of flashtool mode in flashtool
pikpok said:
Use fastboot mode instead of flashtool mode in flashtool
Click to expand...
Click to collapse
Do i have to change the file name of the kernels to boot.img to make it run in fast boot?
This post contains how to root Xperia Ray ST18i ICS 4.0.4 (4.1.B.587) with the use of DooMLoRD Toolkit.
Instructions
Flash the Kernel of 4.1.A.0.562
Download the Kernel - Go to Following Link
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.
Select Ray and Press OK.
Then follow the instruction give by the software to connect the phone to the PC.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Root your device with DooMLoRD’s Tool – Go to Following Link
Re flash the kernel (4.1.B.0.587)
Download the Kernel - Go to Following Link
Now flash the kernel by Follow 3 to 6 in the 1st step.
Now your device is rooted.
Thank You.
For all download Links - winandtips.blogspot.com/2012/09/how-to-root-xperia-ray-st18i-ics-404.html
Special Thanks to - DoomLoRD, OverLo4d (for his tutorial in Arc/S section)
Rooting Xperia Ray St18i
Hi, I have followed the instructions word by word, but its not downgrading to ***562****, after flashing when i restart the phone it still shows ***587""".
Any help with this??????
Regards,
Junaid
danudmw said:
This post contains how to root Xperia Ray ST18i ICS 4.0.4 (4.1.B.587) with the use of DooMLoRD Toolkit.
Instructions
Flash the Kernel of 4.1.A.0.562
Download the Kernel - Go to Following Link
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.
Select Ray and Press OK.
Then follow the instruction give by the software to connect the phone to the PC.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Root your device with DooMLoRD’s Tool – Go to Following Link
Re flash the kernel (4.1.B.0.587)
Download the Kernel - Go to Following Link
Now flash the kernel by Follow 3 to 6 in the 1st step.
Now your device is rooted.
Thank You.
For all download Links - winandtips.blogspot.com/2012/09/how-to-root-xperia-ray-st18i-ics-404.html
Special Thanks to - DoomLoRD, OverLo4d (for his tutorial in Arc/S section)
Click to expand...
Click to collapse
Sorry for my question.
Can I use this steps for my Ray with Android 4.04. but Built is 4.1.B.0.431 ?
where is link?!!!!!!
---
Help
I press the back button after i turnoff the phone and nothing happen . I am nab in the job with rooting,is my first attempt of this type.!!!
adidoareu said:
I press the back button after i turnoff the phone and nothing happen . I am nab in the job with rooting,is my first attempt of this type.!!!
Click to expand...
Click to collapse
Try to press volume down when phone is turned off and while holding it down connect it to the pc. Be sure the drivers from the "flashtool installation folder > drivers" are installed :good:
rooting xperia ray
Hello
My name is Ambrose
I want to update my xperia ray to ics android 4
what do i have to do ?....ive allready tried pc companion repair and it doesnt work....please help!
Anbrosius34 said:
Hello
My name is Ambrose
I want to update my xperia ray to ics android 4
what do i have to do ?....ive allready tried pc companion repair and it doesnt work....please help!
Click to expand...
Click to collapse
Try with sony update service...
Sent from my GT-I9100 using xda premium
Anbrosius34 said:
Hello
My name is Ambrose
I want to update my xperia ray to ics android 4
what do i have to do ?....ive allready tried pc companion repair and it doesnt work....please help!
Click to expand...
Click to collapse
you must relock bootloader and use stock rom
still no ICS on xperia ray
m4nz said:
Try with sony update service...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
hello again....thanks for your reply but i still cant update my xperia ray to ics,it says i allready have my phone up to date and when i update it just blanks all my data and stays on android 2....im so confused....is there any other way i can update my xperia ray to ics? please help me! :crying:
---------- Post added at 07:47 PM ---------- Previous post was at 07:40 PM ----------
V4mpjr3 said:
you must relock bootloader and use stock rom
Click to expand...
Click to collapse
hello
thanks for your reply....i would like to know how to relock my bootloader...please could you tell me?
You can just flash ics ftf with flashtool and flash a prerooted kernel for ics
You needn't relock bootloader!
Sent from my SK17i running MIUI 2.11.16
Usb debugging off
i conntect the device and flash via flashtool
I follow the instructions, but flashtool says
'usb debugging off' but i actually turned on weeks ago and still it is.
any idea?
ackid32 said:
i conntect the device and flash via flashtool
I follow the instructions, but flashtool says
'usb debugging off' but i actually turned on weeks ago and still it is.
any idea?
Click to expand...
Click to collapse
But if you flash a rom, you don't need usb debuggin turned on. Just connect in flashmode, not turned on! Power off, take out battery (optional), hold volume down, connect the usb cable and hold volume down, green led will light up and flashing will start
mihahn said:
But if you flash a rom, you don't need usb debuggin turned on. Just connect in flashmode, not turned on! Power off, take out battery (optional), hold volume down, connect the usb cable and hold volume down, green led will light up and flashing will start
Click to expand...
Click to collapse
I follow these instructions
Download the Kernel - Go to Following Link - done
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )- done
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares- done
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.- done
Select Ray and Press OK.- done
Then follow the instruction give by the software to connect the phone to the PC.
Here i follow the instructions on flashtools - unplus / power off /press the back key and hold / plus the cable
here flashtool says the usb debugging off and stalled
When i follow the below rules.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Xperia ray 4.0.4 to jellybean
Nice and simple trick. But I already updated it with sony pc companion and want to ugrade to jelly bean. How can i get the news regarding its update.
Or do you ahve any updates?
danudmw said:
This post contains how to root Xperia Ray ST18i ICS 4.0.4 (4.1.B.587) with the use of DooMLoRD Toolkit.
Instructions
Flash the Kernel of 4.1.A.0.562
Download the Kernel - Go to Following Link
Download the Flash-Tool and Install (If you have not install flash-Tool drivers first you have to install it - \FlashTool\drivers\ FlashTool-drivers.exe )
Then, put ST18i_4.1.A.0.562_kernel.ftf (Downloaded in 1) into the \FlashTool\Firmwares
Then open FlashTool.exe, Click on the Flash Button and select Flash Mode.
Select Ray and Press OK.
Then follow the instruction give by the software to connect the phone to the PC.
Then you have to connect the device to PC (Make sure that device is switched off [remove battery may be]. First Plug the cable to the device and then plug USB to the PC while press and hold volume down key) (If the device connected correctly, a green led will show up)
After finishing flashing kernel, disconnect the cable and restart the Device. (You might get some errors after rebooting, it is normal, and it will be fixed after next step.
Root your device with DooMLoRD’s Tool – Go to Following Link
Re flash the kernel (4.1.B.0.587)
Download the Kernel - Go to Following Link
Now flash the kernel by Follow 3 to 6 in the 1st step.
Now your device is rooted.
Thank You.
For all download Links - winandtips.blogspot.com/2012/09/how-to-root-xperia-ray-st18i-ics-404.html
Special Thanks to - DoomLoRD, OverLo4d (for his tutorial in Arc/S section)
Click to expand...
Click to collapse
I do not see any links !!!
faizkazi4u said:
Nice and simple trick. But I already updated it with sony pc companion and want to ugrade to jelly bean. How can i get the news regarding its update.
Or do you ahve any updates?
Click to expand...
Click to collapse
You want to update to jellybean? There's no official sony jelly bean update. You can just use Cyanogenmod 10/10.1 for android 4.1.2/4.2.1. But for Cyanogenmod you need to unlock your bootloader
impossible root
junaidzs said:
Hi, I have followed the instructions word by word, but its not downgrading to ***562****, after flashing when i restart the phone it still shows ***587""".
Any help with this??????
Regards,
Junaid
Click to expand...
Click to collapse
i've the same problem... someone help us??
Xperia st18i .587 with 4.0.4
Elius93 said:
i've the same problem... someone help us??
Xperia st18i .587 with 4.0.4
Click to expand...
Click to collapse
same problem!
I am trying to unlock bootloader at my xperia sola bug i get stuck at step 13(i am using the official way).I connect my sola to the computer,led becomes green as it should but then pc doesnt ask me for drivers as this step says and i cant go on!Please help!My bootloader can be unlocked and i tried once rooted,with cwm and stock rom and once with everything stock(no root no nothing)
Help me please!Sorry for my bad einglish!
plutonas1 said:
I am trying to unlock bootloader at my xperia sola bug i get stuck at step 13(i am using the official way).I connect my sola to the computer,led becomes green as it should but then pc doesnt ask me for drivers as this step says and i cant go on!Please help!My bootloader can be unlocked and i tried once rooted,with cwm and stock rom and once with everything stock(no root no nothing)
Help me please!Sorry for my bad einglish!
Click to expand...
Click to collapse
even if nt askd u could point it
Need Help.I too stuck at this point.
I am trying to unlock my boot locker.I followed the sony official guide. i am stuck at the point were my computer should ask for fastboot driver when i am pluging the usb cable,holding fastboot key(Volume up key) simultaneously.I tried to locate driver manually using device manager utility.But not successful . I dont know how to point the driver manually.
XperiasolaArul said:
I am trying to unlock my boot locker.I followed the sony official guide. i am stuck at the point were my computer should ask for fastboot driver when i am pluging the usb cable,holding fastboot key(Volume up key) simultaneously.I tried to locate driver manually using device manager utility.But not successful . I dont know how to point the driver manually.
Click to expand...
Click to collapse
Once you connect your phone via usb and while you are pressing volume up button, on windows go start-> right click on computer->devices manager. Now you should see your device. Right click and install drivers manually from the folder of the drivers you downloaded.
Notice that you have to be fast since and that maybe you will have to repeat this procedure several times since firsts times phone remains on fastboot for really few seconds.
You can also try another way. Download and install latest flashtool. After that go to Computer-> C:/-> Flashtool-> Drivers-> run Flashtool-drivers. Install the drivers for your device.
DaRk-L0rD said:
Once you connect your phone via usb and while you are pressing volume up button, on windows go start-> right click on computer->devices manager. Now you should see your device. Right click and install drivers manually from the folder of the drivers you downloaded.
Notice that you have to be fast since and that maybe you will have to repeat this procedure several times since firsts times phone remains on fastboot for really few seconds.
You can also try another way. Download and install latest flashtool. After that go to Computer-> C:/-> Flashtool-> Drivers-> run Flashtool-drivers. Install the drivers for your device.
Click to expand...
Click to collapse
Thank u DaRk-L0rD. Its working fine :good:
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
BTW my battery was 25%
Bump
Help
Sal7_one said:
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
Click to expand...
Click to collapse
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Thank you si much for replaying I will send it I'm an idiot for not seeing unlocked bootloader
I will fix USB and again thanks bro
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Bro I fixed the usb please it's flashing red what do I do
Sal7_one said:
Bro I fixed the usb please it's flashing red what do I do
Click to expand...
Click to collapse
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
You're really awesome iknow how to use flash tool but it's says drivers are not installed and they are and what should I choice from the wipe menu
I solved the problem with the drivers when I try to flash ftf it's says preparing then it's says device disconnected should I put it on fastbot or flash mod
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
I don't know why but my only problem is the device automatically disconnectes from flash tool after a minute I can't flash !!!! Please help
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Sal7_one said:
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Click to expand...
Click to collapse
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
ptmaniac said:
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
Click to expand...
Click to collapse
Nope after 1 minute flash mode turns off automatically soo now here is what I did
Step 1 downloaded sony c s
Step 2 installed supprot
Step3 press update device without contcing to pc
Step 4 chose repair
Step 5 go with it and put it in flash mode
Step 6 before it finishs it will take a long time
Then it will only charge you can't press the power button for some reason
Step 7 go to flash tool start flash mode and it will reboot automatically
Step8 you will be in safe mode go to settings and format the phone
Step 9 it will reboot and into normal mode
Step 10 root through king root and termanil to make it a real root not temporarliy
Step 11 enable usb debugging and install recovery
Step 12 copy the rom from pc to recovery
Step 13 installed the rom everything is amazing except for one problem
I still can't press the power button I don't think it's hardware help me
That's it thanks for everything tell me if you know anything about the power button
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
ptmaniac said:
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
Click to expand...
Click to collapse
Wtffffffff it's working again. I don't know how bro !!!! I just tested and it's start working again.
But one more problem sim card does not work yes I went to repir it thanks
@Sal7_one humm pwr button working when it wants and sim card problems... that sounds like a bad repair job they probably left a cable / connector loose inside your phone :| i would take it to the same place and make them check / repair the phone again