Help! As what the title says, my computer can't recognize the phone after, and I can't flash through spft and my phone doesn't boot up. I looked through the device manager, and it says "Unknown Device". I tried uninstalling the mtk driver and restarting the pc, but its no use I also tried updating the mtk driver again with the same mtk driver, but the pc says it is up to date.
Is there any way to recover my phone?
Related
Hello
Last week I became my Star x26i. Its quite a very good phone, but because of WiFi and Battery issues i tried to update it to a newer version, like in this tutorial :
http://forum.xda-developers.com/showthread.php?t=1680338
So I used a program, calles SPmultiPortFlashDownloadProject
Everything went fine, but after the program erased the emmc Windows tried to install a new driver and failed. The program stopped and now the phone cant boot anymore (understandable with an formatted eemc...) The Pc detects the phone anyway, first as an unknown device and after installing a new chipset driver as "MediaTek DA USB VCOM Port (COM6)" If I try to reflash with the same program it gives me following issue like on this picture: http://imageshack.us/f/856/erroroly.png/ (Error: No Bootrom USB Port was found! COM6 is not a Bootrom (preloader) USB Port. Auto polling Number0.
Are there any Chances to rescue this device or is it totally bricked? Thanks in advance...
I bricked my phone while installing official update from system update. I tried to flash it with SP flash tool, loaded the scatter, formatted it and then clicked Download with Da Dl...
my phone was detected and started downloading but it wasn't writting the preloader, it was stuck in 0%.
So I reattached the USB cable but alas, My computer culdn't recognize it. Windows says "USB Device not recognized"
I tried 3 different computers, uninstalled every driver with USBdeview. reinstalled them. But nothing changed. Tried pressing power and volume buttons combo. Nothing happened.
What to do now?
N.B. I flashed it with same scatter & firmware before. It was ok then, but last time it bricked.
Device: Lenovo S850
MT6582
I have the MTK drivers installed, when I plug in my phone, it pops up in device manager as "MediaTek preloader usb vcom (android) (com3)" which I believe is exactly what it should say, but there is a yellow caution sign next to it as well as an error on my taskbar stating the device is not recognized.
I have tried to flash anyway and the flash tool just refuses to find it. Ive uninstalled the drivers and reinstalled 100 times, manually pointed to the drivers, tried power+vol up, which gives the most action in the flash tool followed by an error.
upon inspection of the driver under device manager I am presented with an error under the log which I believe is the reason it is saying it is unrecognizable the error is "The USB device returned an invalid serial number string descriptor."
I been at this thing for 2 hours now... any help is appreciated!!!
problem solved.... I just booted up Ubuntu and flashed twrp from there. no problems whatsoever.
Hey guys.
I've tried to downgrade the flyme os version on my m3s with FlashFire and the procces got stuck in the middle.
The phone turned off and there is no sign of life coming from it.
There is no recovery mode, and no sound when connecting device via usb.
Now i'm trying to flash a new rom with Flash tool.
I've downloaded MediaTek drivers, and the phone get recognized only when pressing VOL- button and connecting usb.
After that proccedure the device is detected as "MediaTek USB Port", altough the tutorial saying it should be detected as "USB VCOM PORT".
img: i68.tinypic.com/2eyj9fo.pn
(Sorry for not embedding the pictures in the post, i'm still a newbie here so xda won't allow that for me.)
Flash tool is trying to download the rom's but i keep getting this error: "STATUS_BROM_CMD_FAIL"
img: i67.tinypic.com/2f08zgn.png
Googling that error already a half day. Tried all suggested solutions execpt removing the battery.
What do you about that guys?
Is there any chance of survival for me g2s?
s6n said:
Hey guys.
I've tried to downgrade the flyme os version on my m3s with FlashFire and the procces got stuck in the middle.
The phone turned off and there is no sign of life coming from it.
There is no recovery mode, and no sound when connecting device via usb.
Now i'm trying to flash a new rom with Flash tool.
I've downloaded MediaTek drivers, and the phone get recognized only when pressing VOL- button and connecting usb.
After that proccedure the device is detected as "MediaTek USB Port", altough the tutorial saying it should be detected as "USB VCOM PORT".
img: i68.tinypic.com/2eyj9fo.pn
(Sorry for not embedding the pictures in the post, i'm still a newbie here so xda won't allow that for me.)
Flash tool is trying to download the rom's but i keep getting this error: "STATUS_BROM_CMD_FAIL"
img: i67.tinypic.com/2f08zgn.png
Googling that error already a half day. Tried all suggested solutions execpt removing the battery.
What do you about that guys?
Is there any chance of survival for me g2s?
Click to expand...
Click to collapse
Your PC did not recognized your device because of improper driver installation try after flashing proper driver:-
-Here is the link of drivers of m3s install your required driver from this site:-
http://gsmusbdriver.com/meizu-m3s
Before installing this driver "disable driver signature verification" in your pc and then install this driver....ok...
Sent from my SM-A710F using Tapatalk
AshTechsoft said:
Your PC did not recognized your device because of improper driver installation try after flashing proper driver:-
-Here is the link of drivers of m3s install your required driver from this site:-
Before installing this driver "disable driver signature verification" in your pc and then install this driver....ok...
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
I already did that, couple of times.
The device being detected only when pressing VOL- button and simultaneously connetcting USB.
All tutorials says that it should be detected without pressing any button - just connecting the phone with USB.
I Think that what cause the ERROR in flash tool.
I've spent hours trying to find a working driver for a Vizio XR6m10 mini tablet. I can access it for files via USB on windows, but I'm trying to root it using and under device manager, it still shows "Android Device" with an exclamation point and problem. I've installed the Qualcom drivers multiple times, but no dice and it won't show up on a port in QFIL without the proper driver.
mlfc52 said:
I've spent hours trying to find a working driver for a Vizio XR6m10 mini tablet. I can access it for files via USB on windows, but I'm trying to root it using and under device manager, it still shows "Android Device" with an exclamation point and problem. I've installed the Qualcom drivers multiple times, but no dice and it won't show up on a port in QFIL without the proper driver.
Click to expand...
Click to collapse
Use
Qualcomm HS-USB QDloader 9008 driver for Windows
because without installing this Qualcomm USB Driver on your Windows PC, your PC won’t be able to detect your Android device.
jwoegerbauer said:
Use
because without installing this Qualcomm USB Driver on your Windows PC, your PC won’t be able to detect your Android device.
Click to expand...
Click to collapse
Thanks for the quick reply. I've tried that one multiple times by both downloading and doing the automatic install of those Qualcomm HS-USB QDloader 9008 driver for Windows and also extracting the zip version and using Device Manager. When I go to Device Manager, select update driver/Browse and point to the extracted folder where the drivers are, I just get "Windows could not find drivers for your device,
The device shows up in device manager as "Android" and there must be some kind of communication because I can open a command window in Platform tools and give the command "adb reboot bootloader" and the device will reboot into the bootloader with the little penguin icon on the screen.
I even installed the Android Studio and SDK tools and used the settings in there to install USB drivers and that doesn't work either.
jwoegerbauer said:
Use
Qualcomm HS-USB QDloader 9008 driver for Windows
because without installing this Qualcomm USB Driver on your Windows PC, your PC won’t be able to detect your Android device.
Click to expand...
Click to collapse
Okay, I sorta got the driver working. I had to put the tablet into EDL mode and id does now show up in Device manager and looking at the properties it shows the driver is indeed the QDloader 9008 driver and it now shows as COM 4. There is still an exclamation point on it, but that may be just because it says the driver is unsigned maybe? Anyway, it also shows up in QFIL as com 4, but I get an error communicating with Com 4 when trying to download, so it may be something else with the tablet.
Thanks for your help with the driver!