When are these gonna get fixed..
No ETA's but I think Cyanogenmod is our only hope..
cm9 bugs
i also installed cm 9 and it works fine but theres a bug i notice
1. when i remove the bat and turned on only I will see is the battery charging and turned of again so I go to cwm and reboot then it turns on.
2. there is no file explorer so i need to flash it in cwm the explorer.zip i downloaded.
3. i dont receive a mobile internet config from the provider even i request. when im in 2.3 i can receive the config easily
4.some apps is force close. when i open. and i cant find the external sd in file explorer even it was mounted.
Hope it will fix my concern that is all i notice for now. but overall the cm9 is great.
muftiazan said:
I installed CM9 on my phone but now whenever I lock the phone by pressing the lock key it turns off and then it wont turn on until I remove the battery and put it in again.:crying::crying:
Click to expand...
Click to collapse
I did not experience any
Cyanogen 9 to Cyanogen 10
When will you release the Cyanogen 10 for LG OPTIMUS L3 E400? Reply please.
When you install a nightly ROM, you will have to bear some bugs because it's only an experimental product and is not stable at all.
My suggestion is to report your problem to CM asking the developers to solve it. Good luck.
I rooted my Moto E LTE 2015 from Virgin Mobile and installed CyanogenMod 13 Marshmallow. I have noticed a few problems.
1. Unable to write to internal or external storage.
2. Settings force close upon opening carrier settings in settings.
3. Performance settings don't always stick.
4. Battery settings sometimes force close in settings.
5. Random reboots.
When is a stable build going to be available? I'd like to know.
Meantime you can use
AICP 6.0 Rom
Chisty_143 said:
Meantime you can use
AICP 6.0 Rom
Click to expand...
Click to collapse
I've discovered why Battery Settings force close...
CM13 has bugs with it's builtin theme engine. Still have most of the other problems though.
Thanks for the suggestion, I'll check it out sometime.
Well cm13 is actually very stable and bugless for most users. I think something might have gone wrong with installation. The internal storage problem might be a kernel issue and not a cm13 one, I'd try updating the kernel and if that doesn't solve anything full wipe and install everything again.
Always Read Description First Before Flashing!!!!
CM13 BlitzRom For K3 Note Release V3.0
This Rom Is Updated From V2.0:- http://www.needrom.com/download/cm13-20161116-blitzrom-unofficial-v2-0/
Note:-
Please Use This Twrp Recovery :- http://www.needrom.com/download/twrp-3-0-2-7-2/?
Firmware new build
- Fixed all sensor
- Fixed audio call issue
- Fixed Bluetooth connection
- Fixed Wifi drops
- All updates from Cyanogenmod (incl. security updates)
-Bluetooth Speker
-Added OC Kernel (Thanks Sandeep G)
Multi Language
Working
1.Ril
2.Camera
3.Wifi
4.4G On Both Sim
5.Bluetooth
6.Sound loudspeaker
7.Led
8.Dt2w
9.Faster Charging Added (Special Thanks To Sandeep Sethi)
10.Fixed Video Zoom
11.Added Blitz Kernel
Bugs (Haven't Found Any Bug)
You Tell Me
How to install :
1. Reboot recovery
2. Full wipe (data,system,cache dalvik)
3. Install Rom
4. Wait and after done install gapps (Arm64->6.0->Pico)
5. Done reboot
6. Enjoy
Credits:-
1.Ninad Patil (Me) For Porting This Rom
2.Sandeep Sethi for rom porting tutorial and work on Kernel
3.Mohan CM For Cm 13 rom
4.Venkat Pinnamani
5.Risma Ermaya
6.Team AMT
7.Sandeep G (Overlock Kernel)
8.Ankur Raj for video fix
9.Beta Testers
Links:-
1. Rom
2. Gapps (Select Open Gapps ARM64->6.0->Pico)
3.Video Zoom Patch For CM13 Blitz
Press The Thanks Button
Hey, I couldnt test it myself but on needrom there are comments that bluetooth audio streaming doesnt work. Could you test it and if needed fix it
my internal storage has been decreased to 1.0 GB from from 12 GB after installing this rom. Help me please.
My internal storage is not showing up in explorer... Help please
externus said:
Hey, I couldnt test it myself but on needrom there are comments that bluetooth audio streaming doesnt work. Could you test it and if needed fix it
Click to expand...
Click to collapse
Yes Bluetooth audio is not working...also unable to connect to internet using mobile internet...although phone connects to network and can call without any problems....i tried flashing modem ,after that was able to connect to internet using 2g...no 3g or 4 g on both sims....and finally no screen cast...rest everything works... camera n battery is great.
Regards
No thumbnails in Gallery, delete button hides on selecting multiple files some bugs in gallery can someone do a patch for this bug
---------- Post added at 01:09 PM ---------- Previous post was at 01:07 PM ----------
Battery performance in low, lags a lot. Battery drain quickly
Guys New Update COme Fixed All Bug Clean Flash This Rom Please
Thx. but android security patch October 6, in me it seems.
on November 6, It looks in the picture.
which one is correct?
Gapps include.
when new update sir
Contacts app doesn't seem to be able to detect contacts from the SIM card. They are not displayed at all....
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
zbrix said:
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/k3-note/general/fix-3g-4g-fix-k3-note-t3415579
zbrix said:
I can't connect on 3g/4g on this one
Enviado do meu Lenovo K50a40 através de Tapatalk
Click to expand...
Click to collapse
livgrave said:
http://forum.xda-developers.com/k3-note/general/fix-3g-4g-fix-k3-note-t3415579
Click to expand...
Click to collapse
Thanks my friend now working fine
blitzfire3 said:
Always Read Description First Before Flashing!!!!
CM13 BlitzRom For K3 Note Release V3.0
This Rom Is Updated From V2.0:- http://www.needrom.com/download/cm13-20161116-blitzrom-unofficial-v2-0/
Note:-
Please Use This Twrp Recovery :- http://www.needrom.com/download/twrp-3-0-2-7-2/
Firmware new build
- Fixed all sensor
- Fixed audio call issue
- Fixed Bluetooth connection
- Fixed Wifi drops
- All updates from Cyanogenmod (incl. security updates)
-Bluetooth Speker
-Added OC Kernel (Thanks Sandeep G)
Multi Language
Working
1.Ril
2.Camera
3.Wifi
4.4G On Both Sim
5.Bluetooth
6.Sound loudspeaker
7.Led
8.Dt2w
9.Faster Charging Added (Special Thanks To Sandeep Sethi)
Bugs (Haven't Found Any Bug)
You Tell Me
Known Issue :-
Youtube video zoom (For Fix Lock the screen and unlock. Thanks To Ankur Raj For the Fix)
How to install :
1. Reboot recovery
2. Full wipe (data,system,cache dalvik)
3. Install Rom
4. Wait and after done install gapps (Arm64->6.0->Pico)
5. Done reboot
6. Enjoy
Credits:-
1.Ninad Patil (Me) For Porting This Rom
2.Sandeep Sethi for rom porting tutorial and work on Kernel
3.Mohan CM For Cm 13 rom
4.Venkat Pinnamani
5.Risma Ermaya
6.Team AMT
7.Sandeep G (Overlock Kernel)
8.Ankur Raj for video fix
9.Beta Testers
Links:-
1. Rom
2. Gapps (Select Open Gapps ARM64->6.0->Pico)
Press The Thanks Button
Click to expand...
Click to collapse
Bugs
1. Many Sensors Not working (magnetometer, gyroscope,gravity sensor)
2. NVRAM errors must be fixed by the devloper (Even though we can fix them)
3. I have some issue with jio SIM (but it appears to be from the network's side)
4. CAn you please tell me what fast charging is (I dont feel it,My phone charges like a snail)
But the rom is very smooth and a Very very thanks for it.
Anunay.j said:
Bugs
1. Many Sensors Not working (magnetometer, gyroscope,gravity sensor)
2. NVRAM errors must be fixed by the devloper (Even though we can fix them)
3. I have some issue with jio SIM (but it appears to be from the network's side)
4. CAn you please tell me what fast charging is (I dont feel it,My phone charges like a snail)
But the rom is very smooth and a Very very thanks for it.
Click to expand...
Click to collapse
Gyroscope doesn't work that well for me, not even on VIBE ROMs, it's because it's not an actual gyroscope but rather a virtual gyroscope sensor reading that's made by combining readings from accelerator and compass. Rest of the sensors work just fine for me. I didn't even get the NVRAM error (if you are referring to the NVRAM error in the list of available Wifi networks). Fast charging works but only if you use proper cables. Original k3 note micro USB cable and adapter work just fine for me, 2 amps charging, you can measure the current with an app like Ampere, but an actual inline ampmeter is more precise of course. In either case charging works fast as well.
This ROM can glitch out sometimes, apps crash, but for the most part everything works OK. I thought I might go back to Lollipop ROMS, but then I tried this and I think I'll stick with it for a little while longer, see how it fares on the long run...
Rom is really wonderful. Clean ui and fast.
livgrave said:
Gyroscope doesn't work that well for me, not even on VIBE ROMs, it's because it's not an actual gyroscope but rather a virtual gyroscope sensor reading that's made by combining readings from accelerator and compass. Rest of the sensors work just fine for me. I didn't even get the NVRAM error (if you are referring to the NVRAM error in the list of available Wifi networks). Fast charging works but only if you use proper cables. Original k3 note micro USB cable and adapter work just fine for me, 2 amps charging, you can measure the current with an app like Ampere, but an actual inline ampmeter is more precise of course. In either case charging works fast as well.
This ROM can glitch out sometimes, apps crash, but for the most part everything works OK. I thought I might go back to Lollipop ROMS, but then I tried this and I think I'll stick with it for a little while longer, see how it fares on the long run...
Click to expand...
Click to collapse
I already know that we have a virtual gyroscope, but the real problem is with magnetometer. It does not appear to work. NVRAM errors are mostly found in WIFI (We CAN FIX THEM BUT THIS MUST BE FROM DEVS SIDE ALSO). Last by fast charging i meant fast charging on software side which kills processes (like doze). because on stock the charging was a faster with same cable battery just before flashing the rom.
After a few days of additional use I think that there is a problem with the proximity sensor during calls. It's like the screen is blanked but still remains active. I keep pressing the screen during calls, activating "call on waiting", hanging up, or accessing menus, launching apps. There might be something in what @Anunay.j said that sensors are messed up. I'll try the new Vibe release for a few days, and see how it works...
livgrave said:
After a few days of additional use I think that there is a problem with the proximity sensor during calls. It's like the screen is blanked but still remains active. I keep pressing the screen during calls, activating "call on waiting", hanging up, or accessing menus, launching apps. There might be something in what @Anunay.j said that sensors are messed up. I'll try the new Vibe release for a few days, and see how it works...
Click to expand...
Click to collapse
try to turn off the dt2w. Problem might be there.
I'm having same issue. After ending call screen is a mess[emoji15]
This is a port of LineageOS 14.1 for the Samsung Galaxy Tab A 7.0 (2016) LTE SM-T285. LineageOS needs no introduction, it essentially a rename from CyanogenMod due to naming issues.
5.1.1 is the best that you can get from samsung right now and it is not known if they plan to do any upgrades. I have absolutely no idea why samsung chose to stay with the outdated 5.1.1 mid 2016 when we already got 7.1 coming out. This custom rom is probably the best you can get if you want an upgrade from Lollipop. Performance on the latest build is also better, you be the judge.
I don't recommend you use this as a daily driver, but it should be good enough for some. Make sure you read the pending issues below and decide if this is acceptable to you before you flash this rom.
Based off on LineageOS 14.1 sources which is based on Nougat 7.1.2
Device Tree:
=========
https://github.com/jedld/android
https://github.com/jedld/device_samsung_gtexslte.git
https://github.com/jedld/vendor_samsung_gtexslte.git
https://github.com/jedld/kernel_samsung_gtexslte.git
Note: June 27+ builds uses a special kernel that uses newer mali 400 libs https://github.com/jedld/kernel_samsung_gtexslte/tree/performance_2
Update October 17, 2018
====================
Released maintenance patch - Latest security patches + latest lineageos 14.1 patches
Update December 9, 2017
====================
- November Security Patches
- Latest changes from upstream Lineageos
Update October 5, 2017
==================
- Security updates (October 5 patches, blueborne fix)
- updated kernel to 3.10.107
Update September 27, 2017
======================
This is more of an upstream refresh release and some updates to graphics
- Latest upstream changes from Lineageos
- Using source compiled gralloc build. Seems to speed things up
- now using Android N audio policy config xml files. This should allow for a bit more options for tweakers
- Linux kernel now updated to 3.10.106
Update August 21, 2017
=================
hotfix release: fixed audio_policy.conf file which causes earphones not to register.
Update August 20, 2017
=================
Minor updates:
- alarm clock bug seems to have been fixed
- Update android build to NJH47F
- Added microG patches (https://github.com/microg/android_packages_apps_GmsCore/blob/master/patches/android_frameworks_base-N.patch)
Update June 27, 2017
================
Added a build with Substratum OMS support. Please visit the download section, OMS builds should have a -OMS in its archive name. Use this build if you are into themes and want to use Substratum. For details on substratum please visit the relevant forums.
Update June 26, 2017
================
- Enabled hw decoders (should speed up videos and reduce cpu usage), some glitches can still occur though
- Updated Mali userspace and kernel drivers, use updated gralloc and hwcomposer (Should speed up UX)
- Added NTP settings for GPS
- Updated to LineageOS build NJH47B with June 5 security patches
- Fixed KSM causing a battery drain
- A number of tweaks that I can't remember
- issues: Camera won't work with the stock camera app. Seems to work under third party apps. Video is still broken though.
As usual hit the download section for both the newest and oldest builds. This build also uses an experimental kernel under the performance_2 branch:
https://github.com/jedld/kernel_samsung_gtexslte/tree/performance_2
This build is still alpha so there might still be issues.
Update June 5, 2017
================
minor fixes
- Fix wifi hotspot
- Added GPS patches by @Vagr9K (gps should at least load in apps)
Update May 28, 2017
================
- Fix lock screen
- Incorporate kernel fixes c/o @Vagr9K
- Fix bluetooth
- Update to 7.1.2 Nougat N2G470
Update Feb 12, 2017
===============
- really fix mtp and usb connectivity
- There is a bug where pattern unlock won't show up even when you swipe up in the lockscreen. As a workaround make sure you select "Directly show pattern view" in the "pattern unlock settings" page (Click on the settings knob besides the Screen Lock option). If you somehow forget to do this, you can click on a notification to force pattern unlock to show up, if you don't have notifications, connect your device to USB and the charing notification should show up.
Update Feb 11, 2017
===============
- Improved graphics, HW composer, gralloc built from source and updated Mali drivers
- F2FS support for data partition
Update Jan 31, 2017
===============
Bundled with the new perf+ kernel that I am using for the CM-13 buids
Works:
- Wifi/SMS
- Mobile Data (Need to restart once after first boot)
- Audio
- Graphics
- Incoming/Outgoing Calls
- MTP
- Camera (Stills capture works with 3rd party apps)
- Bluetooth
- Wifi Hotspot
Does not work:
- video recording (sometimes works with 3rd party apps like open camera)
- GPS (no fix)
Issues
* Stability issues and some boot loops (Try to disable hardware GPS, or location services which may solve it)
* Wifi and network performance issues when both bluetooth and wifi is on and vice versa (needs confirmation from testers). I'm not sure if this problem also happens under stock. So if someone can give me feedback that would be appreciated.
* Setting alarms using the stock clock app will crash your tablet, use third party apps instead (this is a bug in upstream LineageOS and not related to this device)
Not essential but still needs to worked on
- HW encoders (06/26/2017 hw decoders now supported)
Other Notes:
- selinux permissive
Most of the issues are fixable, I just need more time and encouragement
SM-T280 Users: Unfortunately this rom would probably not work on it since the SM-T285 and SM-T280 have different kernels and slightly different hardware. I don't have access to this device so it would be hard for me to port it over. However I believe there are a lot of similiarities in the device tree that can be shared. If a dev with the SM-T280 is interested I can probably help.
Download
========
Remember flashing an unofficial ROM on your samsung device will probably void your warranty, Samsung representatives will probably not be able to help you as they are still stuck at 5.1.1 land as of now and have no idea how to handle a SM-T285 that is running 7.1.
As always flash this at your own risk. Make sure you have a copy of the stock ROM so that you have something to fall back to, which is highly the case when using an experimental rom.
See DevDB download section. Or get the latest version LINEAGE-OMS-14.1-20181117-UNOFFICIAL-SMT285-ALPHA.zip
For Older Versions/OMS builds see downloads sections:
All Downloads
Note that this rom is pure stock and does not come with the Play Store or any Gapps, I suggest you download a micro gapps package separately and install it via recovery.
There have been reports that recent versions of open gapps don't work properly, it is advised to use older versions instead (e.g. open_gapps-arm-7.1-nano-20161109.zip)
Installation Instructions
==================
Perform a backup of all of your important files. This ROM is experimental and I will not be responsible for your loss of data.
Download the zip file and extract the tar.
Use Odin/Heimdall to flash the tar file to your device. If you are coming from stock or another rom make sure you wipe first using TWRP. DO NOT USE twrp to flash these zip files, they are not configured for that.
Root and customization/ Build Guide
===================
LineageOS unlike Cyanogenmod does not come with root. However you can easily root it by using TWRP to install the latest version of SuperSU.
If you want to customize this ROM and/or repackage it you may use this guide as a reference.
XDA:DevDB Information
LineageOS-14.1 Samsung Galaxy Tab A 7.0 LTE (SM-T285), ROM for the Samsung Galaxy Tab A series
Contributors
jedld
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Alpha
Created 2017-01-31
Last Updated 2018-10-17
Awesome work!
wow! Thanks jedid!
EDIT 2 amazing...wifi, cellular data for internet, sms, mms, calls all work (and no echo!)
as you wrote...mms (data) and internet (data) work after the 1st reboot
not yet installed gapps
slower than cm13 but an incredible start! (compare with tab s, s2 that even have official marshmallow and even nougat coming or already there for the tab s2 that have all call and data issues...this one is simply a great feat!)
only thing for some reason it will not automatically get the time and day from the cellular network
EDIT 3
a TWRP backup would not restore properly-android.phone.com errors (no root no gapps just basic setup)
strange thing when I flashed gapps (full not pico from Oct for 7.1) had all kinds of google apps force-closes and the network would not connect easily-it did but the errors never ended so I ended up trying to go back to the twrp backup which is when I got the android. phone.com stopped error (repeatedly coming)
am redoing the installation now (maybe was a bad twrp backup cannot know for sure)
mac231us said:
wow! Thanks jedid!
EDIT 2 amazing...wifi, cellular data for internet, sms, mms, calls all work (and no echo!)
as you wrote...mms (data) and internet (data) work after the 1st reboot
not yet installed gapps
slower than cm13 but an incredible start! (compare with tab s, s2 that even have official marshmallow and even nougat coming or already there for the tab s2 that have all call and data issues...this one is simply a great feat!)
only thing for some reason it will not automatically get the time and day from the cellular network
EDIT 3
a TWRP backup would not restore properly-android.phone.com errors (no root no gapps just basic setup)
strange thing when I flashed gapps (full not pico from Oct for 7.1) had all kinds of google apps force-closes and the network would not connect easily-it did but the errors never ended so I ended up trying to go back to the twrp backup which is when I got the android. phone.com stopped error (repeatedly coming)
am redoing the installation now (maybe was a bad twrp backup cannot know for sure)
Click to expand...
Click to collapse
Also happened to me. What I did was to rewipe after Gapps and it worked OK after that. Also set GPS to power saving
issues just reporting...updates
by rewipe do you mean wipe dalvik and cache? thx
edit
for time i just unchecked the auto time zone and manually selected my time zone...the time and day are now correct (but it is an issue..understand way early)
few things
the file manager seems to be missing the root option in general settings and prompts to add root permissions when the option does not show up (maybe because it has no CM root? and that an SU root is secondary? even if cm root is not set?)
the clock has the similar type of error as in cm13 (extreme only?)..try setting up alarm and it freezes when tapping OK to set alarm and then reboots (bootloops just as getting to android is starting message) (need to delete clock data in twrp)
no speakerphone but that has been absent anyway in cm13 and omni as well and the previous cm14
also problem connecting to the computer choosing mtp protocol the usb debugging and the connection option notifications vanish (even if set to always show) (think it does not do anything and remains in charge mode) through dev menu in settings it appears picture transfer may be set
the above are minor irritants given all the other things that are working! thanks
EDIT3
gapps 7.1 pico 20161024 worked no need for dalvik and cache wipe
Hello
Can you fix GPS? The Rom is nice but i really Hard ned GPS. Or give IT nö Chance to fix GPS?
Kevinkuensken said:
Hello
Can you fix GPS? The Rom is nice but i really Hard ned GPS. Or give IT nö Chance to fix GPS?
Click to expand...
Click to collapse
I see a path forward to fix it, but it will require more time to do so.
mac231us said:
by rewipe do you mean wipe dalvik and cache? thx
Click to expand...
Click to collapse
I did a full data wipe after gapps, then it worked. Flashing gapps after going through a first boot seems to cause problems.
@jedid
Ok i hope IT give a fix for GPS. Then ist Use it as Daily.
jedld said:
I did a full data wipe after gapps, then it worked. Flashing gapps after going through a first boot seems to cause problems.
Click to expand...
Click to collapse
the gapps 7.1 pico 20161024 worked without any dalvik wipe (not sure what happened earlier but suspect it was because i used a full stock although of the recommended timeframe of oct 2016 (7.1 only goes back to that month anyway)
Used it the whole day..calls text mms browsing
root explorer would not work (blank screen upon opening)-am using Fx explorer (root which does a great job anyway especially if pasting entire folders into system app/priv-app folders-sets the permissions automatically and correctly)
camera does not work known anyway (was not coming up on 2nd/3rd try)
lte signal similar to cm13 (omni is still fastest to get on and stick)
but at times happened at least 5 times and in static position that the internet signal would drop and then come back (so somewhat finicky there)
lag is there when opening certain apps-just sits there
happens at times when pressing ok button in say some app where you have to accept or reject
but alpha...known and/or expected
don't about bluetooth headset, netflix, audio sophisticated stuff..not into these/kept up with the times
youtube works no issues
odd thing if some app or function fails for some reason it says browser stopped...will have to note down which ones gave that error that had nothing to do with the internet browser (opera beta that I use works no issues as does the built-in browser...unless the data signal drops for some reason-then have to turn off and on the data/or even toggle airplane mode to restart the radio)
Just like your other alpha builds, this is really good; great work! Subjectively, the ROM feels quite fast.
The bugs I noticed were:
1. MTP is not working for me
2. Scrolling was smooth, but slow, and eventually got jerky over time
3. The tablet can be detected by other devices when Bluetooth is on, but it cannot receive any files
4. For some reason, CM Transfer - I did not test other apps that use the same approach to transfer files - is not working
---------- Post added at 12:23 PM ---------- Previous post was at 12:17 PM ----------
Was this device made with Android 7.1 in mind? Some time last year, when I was trying to install a ROM using Flashfire, I noticed that this device seems to have two data partitions. After installing this ROM, the tablet reported that the total 'shared' internal memory was around 8GB, rather than the usual five-or-so gigabytes. I was very surprised
acornkenya said:
Just like your other alpha builds, this is really good; great work! Subjectively, the ROM feels quite fast.
The bugs I noticed were:
1. MTP is not working for me
2. Scrolling was smooth, but slow, and eventually got jerky over time
3. The tablet can be detected by other devices when Bluetooth is on, but it cannot receive any files
4. For some reason, CM Transfer - I did not test other apps that use the same approach to transfer files - is not working
Click to expand...
Click to collapse
Didn't notice MTP wasn't working will take a look at it.
As for bluetooth it is still essentially broken in this build.
---------- Post added at 12:23 PM ---------- Previous post was at 12:17 PM ----------
Click to expand...
Click to collapse
Was this device made with Android 7.1 in mind? Some time last year, when I was trying to install a ROM using Flashfire, I noticed that this device seems to have two data partitions. After installing this ROM, the tablet reported that the total 'shared' internal memory was around 8GB, rather than the usual five-or-so gigabytes. I was very surprised
Click to expand...
Click to collapse
There are changes to how /data is structured but it is still one partition from what I know. It is still a mystery to me how it computes storage especially if you set your external sd card as adoptable, it could probably combine the size of both system and data in that report.
jedld said:
Didn't notice MTP wasn't working will take a look at it.
As for bluetooth it is still essentially broken in this build.
There are changes to how /data is structured but it is still one partition from what I know. It is still a mystery to me how it computes storage especially if you set your external sd card as adoptable, it could probably combine the size of both system and data in that report.
Click to expand...
Click to collapse
.now on a 2nd installation..TWRP backup restore runs into issues (twice now) (only on lineage not cm14.1/13.1/omni) get android.phone stopped issue.
mtp issues..yes in #4 "also problem connecting to the computer choosing mtp protocol the usb debugging and the connection option notifications vanish (even if set to always show) (think it does not do anything and remains in charge mode) through dev menu in settings it appears picture transfer may be set"
it shows up for selection but does not work (sits in charge mode)...I think the picture transfer appears to get set...will check again and try to restore the backup without data
acornkenya said:
Just like your other alpha builds, this is really good; great work! Subjectively, the ROM feels quite fast.
The bugs I noticed were:
1. MTP is not working for me
2. Scrolling was smooth, but slow, and eventually got jerky over time
3. The tablet can be detected by other devices when Bluetooth is on, but it cannot receive any files
4. For some reason, CM Transfer - I did not test other apps that use the same approach to transfer files - is not working
---------- Post added at 12:23 PM ---------- Previous post was at 12:17 PM ----------
Was this device made with Android 7.1 in mind? Some time last year, when I was trying to install a ROM using Flashfire, I noticed that this device seems to have two data partitions. After installing this ROM, the tablet reported that the total 'shared' internal memory was around 8GB, rather than the usual five-or-so gigabytes. I was very surprised
Click to expand...
Click to collapse
anyone here having issues restoring from twrp backup (tried 3 times now each time it fails with looping android.phone crashes-muting the app then toggling airplane mode to restart the radio does not work) basically have to set it up and use it (the rom) but cannot try anything else (or have a backup that can be used in case things go wrong)...ran into the same clock issue as on cm13 (extreme only?) ...could not get out of the rebooting loop (tried deleting data for the desk clock) and then twrp backup would not work either
thanks
edit
I am able to restore without data (so have to set up again including supersu but at least it avoids the odin flashing part)
Seems the alarm clock issue happens on all LineageOS roms and not just mine. Their advice is to just get another app from the app store while they are fixing it.
Hi, thanks for continuing to work on this device.
Sadly, I have (or rather my granny does) a SM-T280... In the last thread there was someone who wanted to try to port to the T280, is there still work going on?
Also can I help? I am not really a developer, but a tinkerer; and I am fed up enough by the Samsung nonsense to try and help (as long as I can be reasonably certain to be able to restore the tablet to a working state even if I mess up, it's not mine after all^^)
SM-T285
:crying:
Just bought SM-T285 yesterday.
Last night I look in youtube on how to root my Samsung Tab A 7.0.
Me, as the stupid human followed the tutorial installing the img then poof! BOOTLOOP.
(looking for stock rom to flash it tru Odin)
Newbie here guys!
I know you can find ways to fix it.
We can wait..
Hello, can you port this for the T580? I kinda really hate CrapWiz
TrapCard said:
:crying:
Just bought SM-T285 yesterday.
Last night I look in youtube on how to root my Samsung Tab A 7.0.
Me, as the stupid human followed the tutorial installing the img then poof! BOOTLOOP.
(looking for stock rom to flash it tru Odin)
Newbie here guys!
I know you can find ways to fix it.
We can wait..
Click to expand...
Click to collapse
Search on the internet.. Several sites updato (very fast), Sammobile.com, Samsung-updates.com
Sent from my SM-T285 using XDA Free mobile app
build 02112017 LineageOS 7.1.1 just released. Hop over to the OP or Downloads section. Enjoy!
couple of issues?
jedld said:
build 02112017 LineageOS 7.1.1 just released. Hop over to the OP or Downloads section. Enjoy!
Click to expand...
Click to collapse
Awesome!
Sent from my SM-T285 using XDA Free mobile app
edit
sorry if not valid here..
jedid, it seems the ftp issue is still there? as before checking or selecting the ftp option simply removes the toggle from the notification (does not show up until next reboot) and does not connect the drives to the computer
also not sure if you were looking at this issue but need to manually select the network time zone (does not automatically detect)
automatic takes it to GMT