PLEASE HELP ME for latest TWRP for lenovo p780 .
i can found only till version 2.7.1 . In this i am unable to flash new roms.
can i get information about the higher version ?
hinguparth23 said:
PLEASE HELP ME for latest TWRP for lenovo p780 .
i can found only till version 2.7.1 . In this i am unable to flash new roms.
can i get information about the higher version ?
Click to expand...
Click to collapse
Hi. Here is the link for latest TWRP for ROW edition.
http://forum.xda-developers.com/attachment.php?attachmentid=3391260&d=1436077810
After download go to recovery 2.7.1.1 and install from there. DO NOT WIPE.
To flash ROW firmware watch carefuly for the one with ROW mark. Do not flash the ones with CN mark.
Flashing is relatively simple.
1. Download your desired firmware.
2. Copy that zip file on your sd card
3. Reboot in recovery or download one reboot to recovery app from google market and give root rights. That kind of app is mutch better for rebooting directly in recovery.
4. In TWRP go to backup. NOT OPTIONAL. And do a full backup.
5. Now after full backup go to wipe and swipe to wipe.
6. After wipe go to install.
7. Install your firmware.
8 Reboot and wait to firmware to install. This will take longer then usual. Do not be scared.
9. Good Luck.
stympy said:
Hi. Here is the link for latest TWRP for ROW edition.
http://forum.xda-developers.com/attachment.php?attachmentid=3391260&d=1436077810
After download go to recovery 2.7.1.1 and install from there. DO NOT WIPE.
To flash ROW firmware watch carefuly for the one with ROW mark. Do not flash the ones with CN mark.
Flashing is relatively simple.
1. Download your desired firmware.
2. Copy that zip file on your sd card
3. Reboot in recovery or download one reboot to recovery app from google market and give root rights. That kind of app is mutch better for rebooting directly in recovery.
4. In TWRP go to backup. NOT OPTIONAL. And do a full backup.
5. Now after full backup go to wipe and swipe to wipe.
6. After wipe go to install.
7. Install your firmware.
8 Reboot and wait to firmware to install. This will take longer then usual. Do not be scared.
9. Good Luck.
Click to expand...
Click to collapse
this latest twrp is to be flashed same as 2.7.1 was done ryt?
hinguparth23 said:
this latest twrp is to be flashed same as 2.7.1 was done ryt?
Click to expand...
Click to collapse
Yes.
stympy said:
Yes.
Click to expand...
Click to collapse
thank you...!! :good::good:
After installing custom firmware which is the next process to do ?
hinguparth23 said:
After installing custom firmware which is the next process to do ?
Click to expand...
Click to collapse
The next step is to see if you like what you installed . Install apps, test, etc etc
stympy said:
The next step is to see if you like what you installed . Install apps, test, etc etc
Click to expand...
Click to collapse
i mean after installing rom , do i need to flash Google apps package from Gapps Manager?
hinguparth23 said:
i mean after installing rom , do i need to flash Google apps package from Gapps Manager?
Click to expand...
Click to collapse
Gapps are installed. Just enjoy
stympy said:
Gapps are installed. Just enjoy
Click to expand...
Click to collapse
i am from india
i have installed Android - M Preview is there any issues of modem?
if yes what should i do ?
hinguparth23 said:
i am from india
i have installed Android - M Preview is there any issues of modem?
if yes what should i do ?
Click to expand...
Click to collapse
You should know what modem software works in your country and go to this post, download and flash.
hinguparth23 said:
i am from india
i have installed Android - M Preview is there any issues of modem?
if yes what should i do ?
Click to expand...
Click to collapse
After installing android m preview flash s228 modem for KitKat
Related
Hello guys,
I yesterday updated to CM13(from cm11),found as an update in CyanogenMod Updates 18.12.2015.
I firstly thought that it wouldnt need new gapps or wipe data/cache,till i find out that after install my i9300 couldnt leave Boot.
After that i tried to do a factory reset/wipe cache partition/wipe dalvik and then reinstall cm13 update only to find out that the problem hasn't been resolved....
Should i try to install CM13 and Gapps 6.0 through ODIN?
what will fix my problem?
Thanks in advance for your time.
I also,tried to factory reset/etc. to install the previous update that i had (cm11 ) but the problem persists!
SOLUTION
So finally I resolved the issue!
Thanks very much for help v7!
I 'll write here all the steps that i did to find the solution in case someone in the future straggle with the same problem.
1)I ve incorrectly tried to install the CM13 as an CM update (previous version: CM11)
2)After the install I couldnt get pass the CM Boot icon and i could only access the recovery mode.
3)Tried to flash previous CM11 versions (also did factory reset,cache and dalvik) but it didn't help.
So the steps to the solution to the problem were:
1)Factory reset and power off the phone
2)Found (as v7 pointed) the stock firmware through here: http://samsung-updates.com/device/ (be carefull to choose the right hardware!)
3)Connect I9300 to Odin software While phone is in download mode (you can enter by pressing HOME Button+Power Button+Volume Down)
4)Choose through the PDA option in Odin the firmware that you 've downloaded (the file type will be in MD5 form so u might need to unzip first)
5)Hit Start Button and leave all the other features intact in ODIN!
6)after installation boot into the stock firmware that you ve just installed.
7)If the boot finished succesfully then continue:
8)Find an Software or a .tar file to REROOT your phone (i ve used CF-autoroot file,which i installed through odin -as you did with the stock firmware)
9)After installing the Root,Boot again the phone,download SuperSU (through playstore), then download root checker and finally flashify so you will be able to install TWRP recovery.
10)Approve Root checker and flashify through SuperSU(in order to verify your root and later flash TWRP)
11)Download latest TWRP (v7 suggested https://dl.twrp.me/i9300/twrp-2.8.7.3-i9300.img ) and copy it to your ext.SD Card.
12)Open Flashify and choose "Boot Image",select the twrp version you've copied in your SD Card and let it flash it.
13)After a succesfull flash,Power off your phone and press Home Button+Power Button+Volume Up to enter the TWRP recovery mode.
14)Through there you ll be able to install the latest CM13 followed by the GAPPS (which are needed in order to have access to Playstore)
You can download the latest Nightly version through here: http://get.cm/?device=i9300&type=nightly
and the latest GAPPS through here: https://www.androidfilehost.com/?w=files&flid=41043 *(i ve used the latest version of mini GAPPS just to be more precise).
PanosR. said:
Hello guys,
I yesterday updated to CM13(from cm11),found as an update in CyanogenMod Updates 18.12.2015.
I firstly thought that it wouldnt need new gapps or wipe data/cache,till i find out that after install my i9300 couldnt leave Boot.
After that i tried to do a factory reset/wipe cache partition/wipe dalvik and then reinstall cm13 update only to find out that the problem hasn't been resolved....
Should i try to install CM13 and Gapps 6.0 through ODIN?
what will fix my problem?
Thanks in advance for your time.
I also,tried to factory reset/etc. to install the previous update that i had (cm11 ) but the problem persists!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
What's your recovery version?Update to latest TWRP 2.8.7.3 abd flash the ROM.Make sure you use Slim GAPPS.
___
v7
XDA Assist
v7 said:
Hello,
Thanks for using XDA Assist.
What's your recovery version?Update to latest TWRP 2.8.7.3 abd flash the ROM.Make sure you use Slim GAPPS.
___
v7
XDA Assist
Click to expand...
Click to collapse
Hello,and thanks for your time!
i have ClockworkMod Recovery v6.0.4.6 (if thats what you mean).Should i update?and if yes,how?(through Odin?)
Any Link for the correct GAPPS?
Cause i ve downloaded "open.gapps-arm-6.0-full-20151113"
Should i install Cm13 and GAPPS through odin? cause i cant go back to cm11,as i ve edited.
Also,should be the kernel updated to boeffla?
PanosR. said:
Hello,and thanks for your time!
i have ClockworkMod Recovery v6.0.4.6 (if thats what you mean).Should i update?and if yes,how?(through Odin?)
Any Link for the correct GAPPS?
Cause i ve downloaded "open.gapps-arm-6.0-full-20151113"
Should i install Cm13 and GAPPS through odin? cause i cant go back to cm11,as i ve edited.
Also,should be the kernel updated to boeffla?
Click to expand...
Click to collapse
Moving your thread to S III Q&A,Help and Troubleshooting
Yes.Update the recovery to TWRP 2.8.6.0+.
You can find the .tar file here TWRP-I9300.Flash it from Odin.
Now from TWRP,flash CM13 followed by SLIM GAPPS.Make sure you flash both together else you'll face freezes.
___
v7
XDA Assist
v7 said:
Moving your thread to S III Q&A,Help and Troubleshooting
Yes.Update the recovery to TWRP 2.8.6.0+.
You can find the .tar file here TWRP-I9300.Flash it from Odin.
Now from TWRP,flash CM13 followed by SLIM GAPPS.Make sure you flash both together else you'll face freezes.
___
v7
XDA Assist
Click to expand...
Click to collapse
Ok!i ll download immidiately and keep you up to date if anything changes!
Btw Slim Mini or Zero GAPPS?
Hello again..
I ve downloaded the twrp file that you suggested "twrp-2.8.6.1-i9300.tar 7.7M",installed it throught ODIN (i got a Pass) but now i cant enter Recovery mode!
PanosR. said:
Hello again..
I ve downloaded the twrp file that you suggested "twrp-2.8.6.1-i9300.tar 7.7M",installed it throught ODIN (i got a Pass) but now i cant enter Recovery mode!
Click to expand...
Click to collapse
Hardware key combo isn't working?
___
v7
XDA Assist
v7 said:
Hardware key combo isn't working?
___
v7
XDA Assist
Click to expand...
Click to collapse
No,it stucks where "Samsung Galaxy I9300" appears and doesnt enter in recovery..
Nevertheless i reinstalled CWM,updated it and now and can re-enter recovery..
I tried to do again factory reset etc. etc.
installed the latest version of cm13 with the gapps that you suggested but i get stucked again in the boot..
I ve w8ed for 20minutes but it s still loading...
PanosR. said:
No,it stucks where "Samsung Galaxy I9300" appears and doesnt enter in recovery..
Nevertheless i reinstalled CWM,updated it and now and can re-enter recovery..
I tried to do again factory reset etc. etc.
installed the latest version of cm13 with the gapps that you suggested but i get stucked again in the boot..
I ve w8ed for 20minutes but it s still loading...
Click to expand...
Click to collapse
Did you try flashing the latest TWRP from CWM?
___
v7
XDA Assist
v7 said:
Did you try flashing the latest TWRP from CWM?
___
v7
XDA Assist
Click to expand...
Click to collapse
No,will this work?
Do i surely need twrp to install CM13?
Can't make it work through the latest CWM?
PanosR. said:
No,will this work?
Do i surely need twrp to install CM13?
Can't make it work through the latest CWM?
Click to expand...
Click to collapse
Flash the CM11 once and flash TWRP using Flashify app/TWRP Manager.
Link to latest TWRP 2.8.7.3.img
___
v7
XDA Assist
v7 said:
Flash the CM11 once and flash TWRP using Flashify app/TWRP Manager.
Link to latest TWRP 2.8.7.3.img
___
v7
XDA Assist
Click to expand...
Click to collapse
Flashed CM11 and again stucked at boot... 15mins since I boot..Should i wait more or is there a problem?
PanosR. said:
Flashed CM11 and again stucked at boot... 15mins since I boot..Should i wait more or is there a problem?
Click to expand...
Click to collapse
This is weird.Wait for 5-10 minutes.If it doesn't work,flash your stock firmware or restore a backup is you have one.
___
v7
XDA Assist
v7 said:
This is weird.Wait for 5-10 minutes.If it doesn't work,flash your stock firmware or restore a backup is you have one.
___
v7
XDA Assist
Click to expand...
Click to collapse
Hello again,finally!I ve been downloading with 50kb/s the stock firmware and i ve managed to install it.
So what do i do now? the phone boot up normally..
How do i finally install twrp and the cm13?
PanosR. said:
Hello again,finally!I ve been downloading with 50kb/s the stock firmware and i ve managed to install it.
So what do i do now? the phone boot up normally..
How do i finally install twrp and the cm13?
Click to expand...
Click to collapse
Root your phone via odin
Install twrp via odin
Flash cm13 with gapps via twrp
Enjoy
Note:backup your efs(for bad days)
SOLVED
So finally I resolved the issue!
Thanks very much for help v7!
I 'll write here all the steps that i did to find the solution in case someone in the future straggle with the same problem.
1)I ve incorrectly tried to install the CM13 as an CM update (previous version: CM11)
2)After the install I couldnt get pass the CM Boot icon and i could only access the recovery mode.
3)Tried to flash previous CM11 versions (also did factory reset,cache and dalvik) but it didn't help.
So the steps to the solution to the problem were:
1)Factory reset and power off the phone
2)Found (as v7 pointed) the stock firmware through here: http://samsung-updates.com/device/ (be carefull to choose the right hardware!)
3)Connect I9300 to Odin software While phone is in download mode (you can enter by pressing HOME Button+Power Button+Volume Down)
4)Choose through the PDA option in Odin the firmware that you 've downloaded (the file type will be in MD5 form so u might need to unzip first)
5)Hit Start Button and leave all the other features intact in ODIN!
6)after installation boot into the stock firmware that you ve just installed.
7)If the boot finished succesfully then continue:
8)Find an Software or a .tar file to REROOT your phone (i ve used CF-autoroot file,which i installed through odin -as you did with the stock firmware)
9)After installing the Root,Boot again the phone,download SuperSU (through playstore), then download root checker and finally flashify so you will be able to install TWRP recovery.
10)Approve Root checker and flashify through SuperSU(in order to verify your root and later flash TWRP)
11)Download latest TWRP (v7 suggested https://dl.twrp.me/i9300/twrp-2.8.7.3-i9300.img ) and copy it to your ext.SD Card.
12)Open Flashify and choose "Boot Image",select the twrp version you've copied in your SD Card and let it flash it.
13)After a succesfull flash,Power off your phone and press Home Button+Power Button+Volume Up to enter the TWRP recovery mode.
14)Through there you ll be able to install the latest CM13 followed by the GAPPS (which are needed in order to have access to Playstore)
You can download the latest Nightly version through here: http://get.cm/?device=i9300&type=nightly
and the latest GAPPS through here: https://www.androidfilehost.com/?w=files&flid=41043 *(i ve used the latest version of mini GAPPS just to be more precise).
Heykır said:
Root your phone via odin
Install twrp via odin
Flash cm13 with gapps via twrp
Enjoy
Note:backup your efs(for bad days)
Click to expand...
Click to collapse
Yeah already done mate!
Thanks,I just though that i wouldnt have to do the whole process again,but i find out few hours ago that this would be the only solution!
Thanks both of you for your time!
I had flashed cm13 in my moto e and installed superSU. When i open superSU , it asks me to select the method to update the binary. I chose "normal". It failed. And asked me to try again after reboot. That too failed. Due to this issue i am unable to use foldermount . Is there any solution?
haribalaji said:
I had flashed cm13 in my moto e and installed superSU. When i open superSU , it asks me to select the method to update the binary. I chose "normal". It failed. And asked me to try again after reboot. That too failed. Due to this issue i am unable to use foldermount . Is there any solution?
Click to expand...
Click to collapse
Use version 2.65 or 2.67 (BETA) - It will use the system-less install (means it can be uninstalled from the Apps list).
Also when you flash the new nightlies, be sure to flash the SuperSU zip in recovery again, or else the error which u said earlier might crop up again.
NB: Do Not click on update binaries (normal or any other method, because that might cause issues which prevents the device from booting... I know this, because I myself have faced such problems earlier)
Bootloop while flashing superSU update zip
I tried flashing UPDATE-SuperSU-v2.46.zip using TWRP(checked mount-> system)
which made the device in the bootloop. Then i had to restore my backup to unbrick the device. So can you explain step by step how to update su binary?
haribalaji said:
I tried flashing UPDATE-SuperSU-v2.46.zip using TWRP(checked mount-> system)
which made the device in the bootloop. Then i had to restore my backup to unbrick the device. So can you explain step by step how to update su binary?
Click to expand...
Click to collapse
Super SU 2.46 was built only for Lollipop ROMs.
Use SuperSU 2.65 or higher
Steps to install after a clean flash of the ROM:
In the Recovery, flash the SuperSU zip
First the phone will boot incompletely (not for all users though), then will boot normally... don't be afraid
You're done!!!
Steps to be followed while flashing new nightlies:
DON'T update automatically from CM Updater
Download the new zip of CM 13, and go to recovery
Wipe Dalvik/ART Cache and Cache only (Nohting else)
Flash the ROM
Flash the SuperSU zip
You're ready to reboot to the new nightly
Hope this helps
Rohitagni said:
Super SU 2.46 was built only for Lollipop ROMs.
Use SuperSU 2.65 or higher
Steps to install after a clean flash of the ROM:
In the Recovery, flash the SuperSU zip
First the phone will boot incompletely (not for all users though), then will boot normally... don't be afraid
You're done!!!
Steps to be followed while flashing new nightlies:
DON'T update automatically from CM Updater
Download the new zip of CM 13, and go to recovery
Wipe Dalvik/ART Cache and Cache only (Nohting else)
Flash the ROM
You're ready to reboot to the new nightly
Hope this helps
Click to expand...
Click to collapse
I've installed superSU 2.65 from play store. Since you insist i will try flashing the latest version. Should i tick "mount->system" in twrp before flashing?
haribalaji said:
I've installed superSU 2.65 from play store. Since you insist i will try flashing the latest version. Should i tick "mount->system" in twrp before flashing?
Click to expand...
Click to collapse
Don't install from Play Store....
I'm sorry... I forgot to mention that
Always flash the zip.... and u donot need to mount system
Rohitagni said:
Don't install from Play Store....
I'm sorry... I forgot to mention that
Always flash the zip.... and u donot need to mount system
Click to expand...
Click to collapse
Thanks Rohitagni . I will follow your instructions and get back to you after flashing the zip.
Rohitagni said:
Don't install from Play Store....
I'm sorry... I forgot to mention that
Always flash the zip.... and u donot need to mount system
Click to expand...
Click to collapse
Wow.. I followed your instructions and it worked like a charm. Thanks.
haribalaji said:
Wow.. I followed your instructions and it worked like a charm. Thanks.
Click to expand...
Click to collapse
No worries bro... Glad it worked
Hello guys, I recently rooted my moto e 5.1 using "theunlockr.com" site's method, and used cwm recovery mod! now I downloaded cm13 for my phone, I noticed that there is no method installing cm 13 with cwm method! Please help me on how to install cm 13 with cwm! My phone is now just rooted! I'm totally noob to cm 13, I also saw an .IMG file on cyanogenmod's moto e page, what's the use of it? I now currently have a cm zip file and an IMG file, and have cwm recovery, please help me installing cm 13 on my phone!
lionking5202 said:
Hello guys, I recently rooted my moto e 5.1 using "theunlockr.com" site's method, and used cwm recovery mod! now I downloaded cm13 for my phone, I noticed that there
Click to expand...
Click to collapse
Cwm is not supported. Flash twrp
About .img file, it's CyanogenMod recovery. There is no need to flash that .IMG file which you downloaded from cm website. Just flash twrp
drs22 said:
Cwm is not supported. Flash twrp
About .img file, it's CyanogenMod recovery. There is no need to flash that .IMG file which you downloaded from cm website. Just flash twrp
Click to expand...
Click to collapse
if you please give me the link of twrp recovery method that'll be helpful!
lionking5202 said:
if you please give me the link of twrp recovery method that'll be helpful!
Click to expand...
Click to collapse
Here
Or if your phone is rooted, you can also use flashify (search on play store)
drs22 said:
Here
Or if your phone is rooted, you can also use flashify (search on play store)
Click to expand...
Click to collapse
its rooted with cwm recovery already
lionking5202 said:
its rooted with cwm recovery already
Click to expand...
Click to collapse
Then install flashify. Select recovery from flashify's main screen>download twrp >select moto e > twrp 3.0.2
drs22 said:
Then install flashify. Select recovery from flashify's main screen>download twrp >select moto e > twrp 3.0.2
Click to expand...
Click to collapse
is it possible to flash twrp if thers already cwm installed in my phone? i will face any problem or not?
lionking5202 said:
is it possible to flash twrp if thers already cwm installed in my phone? i will face any problem or not?
Click to expand...
Click to collapse
Nope. Well, first make a backup from cwm for safety
lionking5202 said:
is it possible to flash twrp if thers already cwm installed in my phone? i will face any problem or not?
Click to expand...
Click to collapse
Download the app "twrp manager" from playstore
Open the app
Grant superuser acces
Select an device (moto e, not moto e 2015)
Install and wait
When the process is finished you can reboot to recovery and flash cyanogenmod 13
This method is totally safe
And you need flash gapps if you want the playstore and other apps of google, use open gapps project
hetor99 said:
Download the app "twrp manager" from playstore
Open the app
Grant superuser acces
Select an device (moto e, not moto e 2015)
Install and wait
When the process is finished you can reboot to recovery and flash cyanogenmod 13
This method is totally safe
And you need flash gapps if you want the playstore and other apps of google, use open gapps project
Click to expand...
Click to collapse
Are you sure bro? Because I already have cwm recovery installed in my phone! Will it work? I don't wanna brick my phone!!!
lionking5202 said:
Are you sure bro? Because I already have cwm recovery installed in my phone! Will it work? I don't wanna brick my phone!!!
Click to expand...
Click to collapse
I have already said it. First make a nandroid backup from cwm and then flash twrp
drs22 said:
I have already said it. First make a nandroid backup from cwm and then flash twrp
Click to expand...
Click to collapse
I went into cwm recovery mode and selected backup, but it failed i think because of low storage in my phone which was 699 mb!
and now my internal storage is running out of space! i only have uc browser, supersu, rom manager installed in my phone! should i factory reset my phone?
lionking5202 said:
I went into cwm recovery mode and selected backup, but it failed i think because of low storage in my phone which was 699 mb!
and now my internal storage is running out of space! i only have uc browser, supersu, rom manager installed in my phone! should i factory reset my phone?
Click to expand...
Click to collapse
You could have backed it up in external storage. Anyways, you may do factory reset but all your data will be deleted.
Or you may try to free up at least 100 mb by clearing cache and deleting unnecessary data so that you can install flashify and flash twrp from it.
lionking5202 said:
Are you sure bro? Because I already have cwm recovery installed in my phone! Will it work? I don't wanna brick my phone!!!
Click to expand...
Click to collapse
This process is fully safe bro and the cwm recovery dont are supported anymore by cyanogenmod and is abandoned, if you want install cyanogenmod 13 install twrp 3.0.2
And if something brick your device, it can be fixed easy
thanks guys i'll let ya know if i got success
drs22 said:
You could have backed it up in external storage. Anyways, you may do factory reset but all your data will be deleted.
Or you may try to free up at least 100 mb by clearing cache and deleting unnecessary data so that you can install flashify and flash twrp from it.
Click to expand...
Click to collapse
hey guys now which one to use flashify or twrp manager
lionking5202 said:
hey guys now which one to use flashify or twrp manager
Click to expand...
Click to collapse
You can chose either of them
lionking5202 said:
Are you sure bro? Because I already have cwm recovery installed in my phone! Will it work? I don't wanna brick my phone!!!
Click to expand...
Click to collapse
this dont brick the device, the changes are aplied to the recovery partition, doesn`t make changes to boot.img partition or system partition, its 100% safe.
And twrp is best, cwm are abandoned by their comunity and dont are supported by too much roms
sorry for my english
Thanks guys, successfully installed cm 13, but now I'm facing a problem, i flashed gapps zip and now Google play services is now showing "unfortunately Google play services has been stopped" gave all the permissions! But still it's coming again and again! I'm not able to track my location in Google maps!!!!!
I have got an update so I downloaded it but when I ask it to install it says "unable to reboot into recovery" !!
Which Version of OS I using CM 14.1 previous Build or CM 13 ?
Sent from my Pixel XL* using Tapatalk
Cm14.1 is dead what you want is to check out GZR ROMs on google plus.
divonika said:
I have got an update so I downloaded it but when I ask it to install it says "unable to reboot into recovery" !!
Click to expand...
Click to collapse
You should have read the rom thread instead of creating a new thread for this. Solution is there: boot to recovery manually, search for the zip file and flash.
pwild said:
You should have read the rom thread instead of creating a new thread for this. Solution is there: boot to recovery manually, search for the zip file and flash.
Click to expand...
Click to collapse
If I just go the recovery n flash it, my user data will be lost right?
divonika said:
If I just go the recovery n flash it, my user data will be lost right?
Click to expand...
Click to collapse
If you are using cm 13 you need to clean flash it...to save your data backup it first using titanium backup.
Hello xda developers
I have an SGS2 (i9100), i tested many custom roms like cm13(official/unofficial), lineage 13(unofficial), resurrection remix(lollipop and marshmallow), aicp (marshmallow), aokp (marshmallow) and more... . the problem that my i9100 always entering to bootloop when i restart the phone or reboot by himself and the only solution is to make data/factory reset to gain access to my phone another time, after 3 or 4 days i should do the same process to remove this terrible bootloop, tested with another battery but no luck.
Please tell me what should i do to make my phone stabe? Is it software or hardware issue?
And thanks.
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Abels2 said:
make clean install with all wipes with TWRP or zip flashable cleaner scripts
Click to expand...
Click to collapse
thanks for reply.
can you provide me flashable zip?
djamiirr said:
thanks for reply.
can you provide me flashable zip?
Click to expand...
Click to collapse
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Abels2 said:
https://mega.nz/#F!gdxEFbzZ!b66K7QoVhWshwUV7L-mgHg
gs2ROMNuke
Click to expand...
Click to collapse
Thank you dude but the SGS2 is still in a bootloop cycle.
djamiirr said:
Thank you dude but the SGS2 is still in a bootloop cycle.
Click to expand...
Click to collapse
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Thank you i will try this solution using my old stockrom (one .tar.md5 file) and a pit with 1GB System, 4GB Data and 512MB Preload .
i hope that will make a difference.
one more question:
can bad repartitioning cause this problem?
Abels2 said:
even after installing a system? return back to rom stock from 4.1.2
Rom:
https://www.mediafire.com/file/ds4xn2jv0exntvx/I9100XWMS3_I9100FOPLS6_FOP_PDA_PHONE_CSC.zip
Odin:
https://www.mediafire.com/file/py55qjre4i96li2/Odin_1.85.zip
chose PIT,PDA,PHONE and CSC and flash after this your phone return stock without bootloops but need root and install TWRP, easy way flash on normal recovery this zip:
https://app.box.com/s/bp9vm6i0vuq1c0x4d8x3y9253b8i38q6/file/52065481861
after this from the TWRP performs the necessary wipes and you can go to the preferred ROM
Click to expand...
Click to collapse
Sorry but no luck
bootlooping again
oh please is there no one can help me??