Related
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
tcoker79 said:
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
Click to expand...
Click to collapse
Nope, its got nothing to do with the rom you are running. The G-Tab is hardware limited to wireless G, no N. I was a little dissapointed by that too when I researched it to buy, but frankly G is fine for streaming vids, music, etc.
Most N routers support dual mode for legacy G devices so I'd suggest turning this on. Additionally if your router does not broadcast its SSID you'll have to manually type it in when setting up the wireless connection on your tab...
tcoker79 said:
Does the Gtab not support wireless N? Or is it Vegan5.1? I have a linksys WRT610N and I have my b/g on the 2.4Ghz and N on the 5Ghz but my Gtab doesn't pick the N SSID. Anyone know why this is?
Click to expand...
Click to collapse
My upstairs router is a WRT610N. My GTab works fine with it. The Gtab comes with a single wireless radio (does not support MIMO) that supports the Wireless-N (802.11n) draft standard.
The Gtab will only see the 2.4GHz band, not the 5GHz band.
Butch1326 said:
My upstairs router is a WRT610N. My GTab works fine with it. The Gtab comes with a single wireless radio (does not support MIMO) that supports the Wireless-N (802.11n) draft standard.
The Gtab will only see the 2.4GHz band, not the 5GHz band.
Click to expand...
Click to collapse
Oops, you're right, thats what I was trying to say, no 5Ghz frequency.... While it connects fine to my N router, it really isn't true N or any speed near it.
powercrazy said:
Nope, its got nothing to do with the rom you are running. The G-Tab is hardware limited to wireless G, no N. I was a little dissapointed by that too when I researched it to buy, but frankly G is fine for streaming vids, music, etc.
Most N routers support dual mode for legacy G devices so I'd suggest turning this on. Additionally if your router does not broadcast its SSID you'll have to manually type it in when setting up the wireless connection on your tab...
Click to expand...
Click to collapse
I have my routers on the 2.4GHz band setup for Wireless-N only, and my Gtab connects to them just fine. Both on my E4200 and my WRT610N.
powercrazy said:
Oops, you're right, thats what I was trying to say, no 5Ghz frequency.... While it connects fine to my N router, it really isn't true N or any speed near it.
Click to expand...
Click to collapse
Yeah, I only see 72Mbit/second, but someone else reported that they saw 270 Mbit/second connecting to their Netgear router.
I agree with you. I haven't seen the throughput, especially during large file transfers.
So once again the marketing monster strikes. Clearly states wireless N but only in the 2.4 Ghz range. That's fine just wanted to be sure there wasn't something I was missing. Thanks to everyone who replied.
tcoker79 said:
So once again the marketing monster strikes. Clearly states wireless N but only in the 2.4 Ghz range. That's fine just wanted to be sure there wasn't something I was missing. Thanks to everyone who replied.
Click to expand...
Click to collapse
N doesnt specify any frequency.
True but when anyone sets up a wireless N router on the 5GHz band only...it will not be found by the G-Tablet. I have mine set up with both 2.4GHz and 5GHz so all of my equipment is covered.
I'm using the WRT310N and I have mine set to Wireless N only.
Standard 20MHz Channel @ 2.412GHz
GTAB Connects.
Hell, if you live in an area where you can use all 14 2.4GHz channels you can even connect on channel 14. A lot less interference.
My gTab can see my N-network but it disconnect immideatly after I try to connect. I have 2 routers; 1 upstairs with N only, an done downstairs with both N & G. I'm mostly upstairs but I have to connect to the G-router which only gives me one bar.. But it works just fine, although full speed N would have been nice for Winamp Wifi-sync and transfering Movies etc
Mine connects to DLink Dir655 2.4Ghz rounter using N protocol but gTab radio definitely not a MIMO one.
Best download speed is about 2.7 - 3.0 MByte per second when using FTP, and only 1.9 - 2.0 MByte per second when using SMB protocol.
My laptop can get upload/download speeds around 9-10 MByte per second using same router and 2.4Ghz MIMO N wireless card.
I was wondering if any prime owners tryed to connect on a N-Only wifi?? on the box it says a/b,g,n wireless but when i try to set my wifi to N-Only, i can see the network but theirs no way the prime is connecting to it. I have to switch it back to either Mixed or G/N Mixed, and then im able to connect with a max connectivity with router of 54mbps. This problem was present before and after ICS update, my router is a Asus RT-N12 (tryed with stock firmware, updated stock firmware and with DDWRT). I Would like to know if any of you guys tryed this out I feel i'v been kinda scammed
PS. (I checked out on Q&A for the prime and couldnt find any post related to this if you guys know there is already one, please just give me the link i'll continu posting on the other thread thanks)
I can't connect to my "N" router either. Mine doesn't even show up in my TF.
is it a TF prime or the first one?
N-5ghz is not supported, putting it in 2.4Ghz mode should work (at least, it does on mine... whether there's a difference or not is another thing)
I can connect my prime to my router with N only as long as its on 2.4GHZ and between channels 1-11. I wish I could pick up 12-14 because I live in an apartment complex with crowded wifi. Router is Cisco E2000 with DDWRT firmware...
The link speed showing on the network signal app only maxes at 54 mbps though. I can stream 1080p mp4s from my network drive though so its fast enough for me...
RT-N12 is operating on 2.4ghz and does not support 5ghz. Are you sure you are in "N-Only" mode or are you in "Mixed"??
This has been discussed in great detail in general section. Its known Prime can't connect to 5Ghz. set it to 2.5 or G only. G only seems tl yield best results. also check this article out..might help.
www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
Yes, it connects 2.5 N only but the performance is pathetic. Prior to ICS, I got curious changing my 2.5 GHz band to strictly G. Saw an immediate boost in performance + speeds.
Yes so far I am very disappointed. I just got the Prime today and it immediately updated to ICS. Once that was done I started checking out the wifi ability right away, because of all the bad reports all over the internet. Much to my surprise, mine doesn't see my wireless N either. I had the TF101 prior and it worked fine with my router. My Samsung E4GT phone sees it just fine, and what really hurts is my wife's iPad 2 sees it, connects to it and pulls just under 20mbps speeds.
To say this sucks is an understatement. I hate losing to Apple in any way, and here I am with the latest and greatest Android tablet, and being punked by a nearly year old IOS device.
Crap
I have no wifi issues with my N router... Performance can be a little better (speed wise) but no issues connecting at all, my router is cisco
Sent from my Transformer Prime TF201 using xda premium
wherestheanykey said:
Yes so far I am very disappointed. I just got the Prime today and it immediately updated to ICS. Once that was done I started checking out the wifi ability right away, because of all the bad reports all over the internet. Much to my surprise, mine doesn't see my wireless N either. I had the TF101 prior and it worked fine with my router. My Samsung E4GT phone sees it just fine, and what really hurts is my wife's iPad 2 sees it, connects to it and pulls just under 20mbps speeds.
To say this sucks is an understatement. I hate losing to Apple in any way, and here I am with the latest and greatest Android tablet, and being punked by a nearly year old IOS device.
Crap
Click to expand...
Click to collapse
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
jedi5diah said:
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
Click to expand...
Click to collapse
Exactly, the prime doesn't support the 5Ghz frequency. Only supports 2.5ghz N or whatever. There's only a few tablets that do actually support 5ghz. All it takes is a simple change n it'll work. THE whole argument that it should work on any network is b.s. Especially if you have it set to something not supported. Doesn't take a genius to figure that out.
I've always used N-Only. I get a decent connection to my Transformer Prime with it too.
Mines is the cheap Belkin N150 router so I doubt it does that 5Ghz range as that seem like a setting for a higher priced N router.
Scott1620 said:
I can connect my prime to my router with N only as long as its on 2.4GHZ and between channels 1-11. I wish I could pick up 12-14 because I live in an apartment complex with crowded wifi. Router is Cisco E2000 with DDWRT firmware...
The link speed showing on the network signal app only maxes at 54 mbps though. I can stream 1080p mp4s from my network drive though so its fast enough for me...
Click to expand...
Click to collapse
Point 1: Your are in the US, so you are not allowed using anything except 1-11 by FCC regulations.
Point 2: N-Only often turns on channel bonding in soho equipment like yours, so it needs 8 full channels to use it properly. Each channel is 5 MHz apart from the other and a WiFi device uses channels in a/b/g that are 20 MHz wide, in 11n with channel bonding (which is an optional feature for the high data rates) they use channels of 40 MHz. So dividing the 40 Mhz by 5 Mhz makes using of channel 14, 13, 12, 11, 10, 9, 8, 7. If you would live in Japan, on only country that is allowed to use channel 14. So for US it would be channel 11-4. This explains why channel bonding in the 2.4 GHz band is a band ides unless you are living in a big ranch 500 feet away from the next WiFi router.
---------- Post added at 11:28 PM ---------- Previous post was at 11:24 PM ----------
the_game_master said:
I've always used N-Only. I get a decent connection to my Transformer Prime with it too.
Mines is the cheap Belkin N150 router so I doubt it does that 5Ghz range as that seem like a setting for a higher priced N router.
Click to expand...
Click to collapse
Cool device, taken from the specs page of belkin.com:
Security: Wi-Fi Protected Setup, 256-bit WEP (64-128bit), WPA-PSK (TKIP), WPA2- PSK (AES) with WPS Push Button
Range of up to 1,000 ft.
Link Rate: Up to 150Mbps in 40MHz Channel Mode Bandwidth 20 MHz & 20/40 MHz auto
ISP Protocols Supported Dynamic, Static, PPPoE, PPTP, Telstra Bigpond, L2TP
Compliant Standard IEEE 802.11b, 802.11g
So no 11n support per specs, but the Overview page tells 150 MBits are supported, so it can run 75 Mbits without channel bonding and 150 with.
Try out the WiFi Widget it tells you the data rate to the WiFi router.
jedi5diah said:
What do you stream over 5ghz network to iPad? 1080p movies? It redundant...just turn down to 2.4 and everyone is happy.
Having a technically higher spec which does not improve on daily usage is redundant.
Click to expand...
Click to collapse
I spent the extra money to purchase a dual band router, so I could broadcast N and G as two separate signals. As I understand it, if you broadcast both on a single signal, and you have some older devices that require and connect to the G band, it will automatically cut the speed back, to whatever the slowest device connected is capable of. At least that is the way it was explained to me. So the N was on 5ghz and G was on 2.4ghz. It has always worked with any other wireless N device I have had, until I got this "latest and greatest" tablet. So yes now I have downgraded my wireless network to only 1 band, to accommodate the Prime.
wherestheanykey said:
I spent the extra money to purchase a dual band router, so I could broadcast N and G as two separate signals. As I understand it, if you broadcast both on a single signal, and you have some older devices that require and connect to the G band, it will automatically cut the speed back, to whatever the slowest device connected is capable of. At least that is the way it was explained to me. So the N was on 5ghz and G was on 2.4ghz. It has always worked with any other wireless N device I have had, until I got this "latest and greatest" tablet. So yes now I have downgraded my wireless network to only 1 band, to accommodate the Prime.
Click to expand...
Click to collapse
If you have 2.4ghz g network, prime should be able to detect it. Check if your dual band is working properly...
Wireless n is impt only if you stream HD movies. I stream music on g with no problem at all.
I know you feel frustrated, and I know it sucks as prime is supposed to be PRIME. If you intend to stream HD movies to prime you may have to "down grade" to 2.4ghz if not wireless N is kind of overrated or "miss used" as I see no use of having to stream HD to non HD devices. If you are a home theater enthusiastic or business it then wireless n 5mhz is a must.
Hope you can move on to appreciate the quad core of prime than dwelling on this issue.
Cheers!
dagrim1 said:
N-5ghz is not supported, putting it in 2.4Ghz mode should work (at least, it does on mine... whether there's a difference or not is another thing)
Click to expand...
Click to collapse
Dah!!
I just open a new thread for this very issue.... I'm sure I'm going to get ding for it.
any way...
Mine doesn't connect to the "N" wireless
My router hosts "N" and "a/b/g" modes cisco 3200
it only connects to the 2.4 Ghz a/b/g mode...
Desn't work even if I set the "N" mode to 2.4 Ghz channel and turn OFF the a/b/g mode.
PuroKaibil said:
Dah!!
I just open a new thread for this very issue.... I'm sure I'm going to get ding for it.
any way...
Mine doesn't connect to the "N" wireless
My router hosts "N" and "a/b/g" modes cisco 3200
it only connects to the 2.4 Ghz a/b/g mode...
Desn't work even if I set the "N" mode to 2.4 Ghz channel and turn OFF the a/b/g mode.
Click to expand...
Click to collapse
You right about getting ringed..lmao. I just posted to your thread. 5Ghz N range is marketing b.s. its way overhyped n not as good as people think anyways. Read this tech article to get the real scoop on it and tips.
Www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
demandarin said:
You right about getting ringed..lmao. I just posted to your thread. 5Ghz N range is marketing b.s. its way overhyped n not as good as people think anyways. Read this tech article to get the real scoop on it and tips.
Www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed
Click to expand...
Click to collapse
I did read it and thank you at the other thread....
Great Read...
Thanks again.
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
i thought wifi was only 2.4ghz on this phone. my 5ghz network doesnt even show on my phone.
5ghz seems to be working fine for me
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
grad20_09 said:
only certain 5ghz channels are supported. see if ur router is on channel 36 for 5ghz.
Click to expand...
Click to collapse
I have been able to use channels 140 and 149 as well as 36. What I did notice is that the first time I connect to (the very first time or if I make a change to the router) the wifi signal will drop and start several times.....I find if I just turn off wifi and turn it back on and reconnect it will hold.
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
dagnasty said:
Actually, I have it running on 144 and working now. I had to set the mode from N only to NA mixed.
Sent from my EVO using XDA
Click to expand...
Click to collapse
Hmmm...mine is set to N only...being its the only device on my 5G connection.
Yea, the only thing on mine is my other router setup as a bridge for my downstairs. I guess ill leave it since its working
Sent from my EVO using XDA
I've got an apple airport extreme. my evo connects just fine on 5ghz
I have a Cisco ISR wireless router and I use strictly 5Ghz. It's wireless-A, not wireless-N, but it's strictly 5Ghz and it scan and uses whatever channel it wants. No issues so far.
I tried N network a while ago on my older phones (not 5Ghz N) and noticed more battery drain VS G. Since then I have switched my N to 5Ghz and just use my ipad3 for it. My phone I keep on G network. I don't see any real point to having it on a N network. G I still pull 10+ megabits down which is more than enough for pretty much anything the phone can do. Not really worth the extra battery drain in my opinion. My ipad I like on higher speed since I stream MKV files but the phone I think is pointless at least for me.
Sprint HTC Evo 4G LTE 5Ghz WiFi
dagnasty said:
I was surprised to find that this phone supports bot 2.4GHz and 5GHz for wifi. However, I am having a problem getting it to connect to my 5GHz N radio. It will see it and says that the signal is excellent. I type in my WPA key and hit connect. It attempts to connect then goes back to disconnected. If I click on the name of it, it show signal as poor and link speed as -1Mbps. It connects fine to the 2.4GHz radio. The router is a Buffalo WZR-HP-AG300H running DD-WRT. Has anyone else had this issue?
Click to expand...
Click to collapse
I actually had the exact same problem as you mentioned. The one thing I wanted to add to your excellent description of problem symptoms is that it says "Authenticating", and that is when it drops the signal to -1Mbps. Something during the authentication process seems to kill the radio connectivity. This has not happened on any of my other 802.11n devices. It connects fine on the same router's 802.11g. I had no issues with my previous phone (Samsung Epic Galaxy S).
Interestingly my router is a different brand but perhaps it shares some similar chipset. My equipment as follows:
Bone stock Sprint HTC Evo 4g LTE (on Ice Cream Sandwich, duhh)
Belkin Play N600 HD Wireless Dual-Band N+ Router (F7D8301 v1)
After reading the other posts here it inspired me to play with my Router configs for 802.11N. Turns out after making some adjustments I was able to get connected.
-I had the following selected:
Wireless Channel: Auto
Extension Channel: 40 (grayed out)
Wireless Mode: 802.11a&n -Worked after changed to 802.11n
Bandwidth: 20/40MHz
Protected Mode: OFF -Worked after changed to On
802.11e/WMM QoS: On
I honestly think it was the Protected Mode that made the difference. Here is what the router help page says about that feature: Protected Mode
NOTE: In most situations, best performance (throughput) is achieved with Protected Mode OFF. If you are operating in an environment with HEAVY 802.11b traffic or interference, best performance may be achieved with Protected Mode ON.
So long story short, try turning Protected Mode ON in your 802.11n configs first and see if that gets it going for you. Hope that helps!
P.S. After changes above I ran some Speedtest.net for Android tests (back to back) and got the following from the next room over (about 20 feet from router):
Test 1: On 802.11n: 17024kbps down, 5857kbps up, 27ms ping
Test 2: On 802.11n: 18134kbps down, 6266kbps up, 39ms ping
Test 3: On 802.11g: 15385kbps down, 6091kbps up, 25ms ping
Test 4: On 802.11g: 22212kbps down, 5785kbps up, 43ms ping
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
kevinrstruck said:
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
Click to expand...
Click to collapse
What router do you have? Also what kind of connection speed are you getting?
I checked freq and it was on auto, tried just 5ghz, also tried Best wifi but it still cant connect to the internet. I gets a connection with the router according to the phone but my 6300 doesnt show it as a connected device.
no problem here i can connect to my 5Ghz network with my a/n capable Time Capsule router. speeds are 55..27 Mbps download / 35.95 Mbps upload. my One wifi settings are set to Auto (vs. setting to 2.5 or 5 Ghz).
I have a Netgear WNDR4500. Speeds are 40 Mbps down and 28 Mbps up. That is with the router 2 floors above me in my house. My settings are also set to "Auto" as well. I connected immediately when I got home on Thursday after getting the device. I have had no problems at all with WiFi. Sorry I cannot be of more assistance.
I have no problem when connecting to my R6300 in AC mode ...
mine connects just fine
No connection at 5ghz, can only connect at 2ghz
I have d-link dr-825 rev B router with [DD-WRT v24-sp2 (04/01/13) std - build 21153] firmware. It has dual 2ghz and 5ghz radios.
I can only connect at 2ghz and unable to connect at 5ghz.
I have a dell latitude laptop and my old Galaxy SII has no problem connecting.
Howvever Htc-One lists the access point, correctly determines what kind of security is on (like wpa/wpa2 etc) but is unable to connect. I think once I saw a brief flash saying authentication failure on my phone when trying to connect to 5ghz. So I removed all security and made it completely open just to try. Again no connection without any error.
I am thinking of returning it if it is going to be a problem.
---------- Post added at 12:17 PM ---------- Previous post was at 11:40 AM ----------
Ok, I have solved the problem, now it is connecting. I made two changes in the wirless setup. Enable RTS/CTS protection and also enabled short preamble. After these two changes it is connecting as expected.
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
I'm having the same issue with mine and the same router, can not quiet figure out what is going on.
Just quick update i just did an update on my router and it seems to connect completely fine
For those who have router issues, check for a firmware update! Most routers have a few updates while sitting on the shelf. I used to always update and properly configure routers (with out the software disc) for customers at my old job and we rarely had problems of customers bribing it back. And throw out the disc that comes with the router. The software can cause headaches down the road. All security settings can be done inside the router through any web browser and router IP.
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Connects to my linksys ea6500 5ghz ac just fine link speed around 400 mbps
Sent from my HTC One using XDA Premium HD app
Added an Airport Express, and 5ghz works fine from that...
cq_ said:
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Click to expand...
Click to collapse
Prefers 2.4
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
Correct. The 2.4 GHz network should travel further. Its all about that sweet sweet 5 GHz speed though! Mine connects to my Asus RT-AC66U router just fine.
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
no preferred option?
godfirst said:
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
doxy-LS said:
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
Click to expand...
Click to collapse
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
godfirst said:
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Well I want to be able to use the 2.4 GHz networks when available, so I'll leave it on auto. I guess the speed isn't a huge deal when the wireless connection is so much faster than my internet connection.
And yes, I know that there are lots of differences between stock & custom ROMs (my last phone was a Nexus S & I was always changing ROMs). What I meant to ask was if there was a difference with that specific option.
wifi 2.4GHz connection problems
Welcome
I have silver One for 3 weeks now, but it was 2 weeks in service - they reinstalled software and returned phone. No change.
I can't connect to any 2.4 Ghz network (G/N) ending Authentication Error. Only 5GHz works.
I tried it with Netgreat WNDR4700 (Gargoyle custom software), CISCO access point @ work, also random WiFi open networks in shops/malls, etc. Other devices i know and have at home ( Samsung Note II, htc Sensation, Acer Iconia tab, Dell Latitude laptop) works fine. Just the One cosing problems.
I run stock rom, how can I turn on more verbose logging or see what is happening in the Operation system while connecting? I must prove to Regenersis Poland service that my phone does not work. Otherwise they will say phone works within parameters.
So I am on t-mobile, and I also have one of the routers provided to me by t-mobile (I believe it's an Asus) , and I have noticed recently that my wifi calling has been sucking big time. It cuts in and out and says I need to connect to a wifi network, when I am connected. It's like it doesn't notice that there is a wifi connection. Anyone have suggestions as to what might help?
What is your isp bandwidth (down/up)?
DarkManX4lf said:
What is your isp bandwidth (down/up)?
Click to expand...
Click to collapse
100 down 20 up
WiFi calling on Android is hit and miss. I wish it was as stable as Blackberry UMA calling.
I tried the old turn it on and off again on the modem and router and it seems to have helped quite a bit.
Unfortunately, I have this issue for a quite while. Funny thing wifi calling works smoothly on pixel or essential phone!
How old is the router?
The router's WiFi radio maybe showing its age by being intermittent with its throughput's strength and/or signal's strength.
Try with newer router or access point. If there is a coffee shop with very good throughput strength (this is most important) you can do a test with that hotspot.