honor 7 in continuous reboot I tried to install all firmware 100-130 but when I go to press 3 keys vol + vol - to enter forced upgrades do not work, I used various methods the last one with tool to honor 7.
I used files
boot.img
recovery.img
cust.img
system.img
fw b100 but the cell goes into continuous reboot eie keys vol + vol- not work, but using the update recovery.img mm B313 keys vol + vol- work but does not load the firmware placed in the folder dload crashes 5% ... help me
have the same problems,
triggered by flash TWRP 2.8.7.0 in B170
same results in all tests as Raffaele
same **** here
We need HEEELP!!
Same as the others. Cant do sh*t about that.
raffaele0084 said:
honor 7 in continuous reboot I tried to install all firmware 100-130 but when I go to press 3 keys vol + vol - to enter forced upgrades do not work, I used various methods the last one with tool to honor 7.
I used files
boot.img
recovery.img
cust.img
system.img
fw b100 but the cell goes into continuous reboot eie keys vol + vol- not work, but using the update recovery.img mm B313 keys vol + vol- work but does not load the firmware placed in the folder dload crashes 5% ... help me
Click to expand...
Click to collapse
.img files can only be flashed from an unlocked bootloader.
Try this order (B100 Full Firmware):
Boot
System
Recovery
Cust
Cache
Userdata (deletes everything on internal SD, so be careful)
I also advise to stay away from the MM beta update for now since it's a no go for me too and for many more.
Just go up to B130 or B140 if you can for now. The full MM update is coming soon anyway.
Risolto grazie ad un angelo su xda grazie cmq a tutti ho installato dalla b130 i file system.IMG boot.IMG cust.IMG recovery.IMG dopo aver installato tutto ho scaricato la b170 e ho installato solo boot.IMG e recovery.IMG con fastboot ed e partito poi con i tasti vol+ vol- e power installare il file update completo da 3 giga
just a question, are you using a case that covers the power button?
in my case, i solved by bending the outer shell of the case
if you are not, then just ignore me....
edit:
can you boot to the homescreen?
raffaele0084 said:
honor 7 in continuous reboot I tried to install all firmware 100-130 but when I go to press 3 keys vol + vol - to enter forced upgrades do not work, I used various methods the last one with tool to honor 7.
I used files
boot.img
recovery.img
cust.img
system.img
fw b100 but the cell goes into continuous reboot eie keys vol + vol- not work, but using the update recovery.img mm B313 keys vol + vol- work but does not load the firmware placed in the folder dload crashes 5% ... help me
Click to expand...
Click to collapse
It is likely that your external SDCARD is not detected by system. I am suspecting that also low free space on SDCARD might cause problems. The format of external SDCARD should be FAT or FAT32.
if you have tried to flash twrp after updating to b170 you have to extract boot and recovery from b170 update.app and flash both with fastboot + flash system.img from full b121 > your system should start up now and you should be able to enter stock recovery.
after that you have to put udate.app from b313 downgrade package into your download folder and install it (it will fail at 95%, but the b300 system will boot) after that place the update.app from the full b121 into dload folder and start the update process. you should be back at a full working b121.
http://forum.xda-developers.com/showpost.php?p=64592849&postcount=9
This post is unexpected. Don't know how to delete it (can just do an edit)!
Bootloop solved
You can see the thread "Bootloop solved : My Honor 7 lives again".
Perhaps it could be help you to get the bootloop away.
Hi, I had the continuous restart issue and working fine when its connected to original charger. For this my kind advice is, change your battery.
In case if you need contact me - 9842184878.
Huawei Honor 6 - Bootloop Problem
Kesavan16 said:
Hi, I had the continuous restart issue and working fine when its connected to original charger. For this my kind advice is, change your battery.
In case if you need contact me - 9842184878.
Click to expand...
Click to collapse
My Huawei Honor 6 was working completely fine last night. Charger plugging my mobile normal working and unplugged it in the charger it will not turn on. I’ve tried multiple things to troubleshoot this issue; I have tried to my computer, and multiple wall outlets, using multiple chargers and cables. There are vibrations with Honor Logo that come on and auto Restart (Boot Loop) Problem… Do you have any other ideas? Please give me solution
if battery problem, i ll change it. battery cost? if you have new original honor 6 battery?
Related
Hello, I think I´ve got a serious problem with my Huawei Ascend Mate 7.
I bought it as software damaged and hoped to fix it, but it seems to be more difficult as expected.
When it attempts to boot up following error-message ist displayed:
Rescue-mode
Attention, please update System again.
Func No: 9 (FUNC_BOOT_KERNEL)
Error NO : 2
When I want to enter the recovery with power button and volume up, there is also a error message as following:
Func No : 10 (FUNC_BOOT_RECOVERY)
Error No: 2
Even the force update 3 buttons method doesn't work either.
When I put the UPDATE.APP in the dload folder in the root of the SD-card and attempt to perform the update its stuck at the Huawei "power on" logo.
I also tried to flash different recovery and boot.imgs (from different versions TL09, TL00 -->because I don´t exactly know which one I own -->the pre-owner replaced the battery-housing (which indicates the TL00 version, and the sticker of the original package shows the TL09 version.
It doesn't matter which recovery or boot img I flashed every time the same error-message ist displayed. Even i was not able to enter the recovery. (But fastboot recognition and executing commands like "flash" and so on works)
So I am out of ideas, every kind of help is appreciated.
Thread moved to proper forum.
Hello
Did you restore your phone to life?
Because I have the same problem and tried everything already.
Regards
Hello,
no i sold it as damaged.
what is the soltion????
i brought the phone back to life getting this error too.
look carefully at e error boot kernel msg,it says go to the website n download some files too,so i went ahead n downloaded some kernel files for my huawei mate 7.. i installed the firmware stock rom too for my huawei. note* this 2 files r impt to revive yr phone after getting this msg*
have yr fastboot downloaded n install twrp recovery.(pls download the correct version for yr huawei,mine is mate 7) & rename it recovery.img n place the file in the fastboot route, while e route file window is opened now, hold down shift n right click yr mouse n select edit command prompt here..
next.. plug usb into yr com n connect it to yr phone, now hold both vol - & power button key to get into fastboot mode n go ahead n flash the recovery.img by typing this command(fastboot flash recovery recovery.img)
after success of flashing,hold BOTH vol + & power button ,release both when you see boot logo. twrp teamwin shd show up (n went ahead wipe/factory reset.*note if u nd to backup,u should!* i reckon my batt is low,so i use the twrp(power off) option n viola it finally get charged up becos previously it wont charge at all. so i charged to 100% .
next..remember the 2 files i downloaded earlier? i throw them into my clean SD CARD(yes i formatted them incase there's too much rubbish n updating wont catch e files i downloaded) and slot into the phone n power off my phone. now, hold the 3 buttons, vol + vol - & powerkey, n VIOLA! updating should start n yr phone is back to life!!
previously my phone lags, after installing the stock firmware and the kernel. everything went so smoothly, i reckon the default rom is an old version. so in short ******just download a proper stock rom & kernel for yr huawei, dont unzip, just throw them into SD card n update by holding down all the buttons . or maybe full battery 100% does e trick if you already know how to revive them. try both! Good luck !
ITger_ling said:
i brought the phone back to life getting this error too.
look carefully at e error boot kernel msg,it says go to the website n download some files too,so i went ahead n downloaded some kernel files for my huawei mate 7.. i installed the firmware stock rom too for my huawei. note* this 2 files r impt to revive yr phone after getting this msg*
have yr fastboot downloaded n install twrp recovery.(pls download the correct version for yr huawei,mine is mate 7) & rename it recovery.img n place the file in the fastboot route, while e route file window is opened now, hold down shift n right click yr mouse n select edit command prompt here..
next.. plug usb into yr com n connect it to yr phone, now hold both vol - & power button key to get into fastboot mode n go ahead n flash the recovery.img by typing this command(fastboot flash recovery recovery.img)
after success of flashing,hold BOTH vol + & power button ,release both when you see boot logo. twrp teamwin shd show up (n went ahead wipe/factory reset.*note if u nd to backup,u should!* i reckon my batt is low,so i use the twrp(power off) option n viola it finally get charged up becos previously it wont charge at all. so i charged to 100% .
next..remember the 2 files i downloaded earlier? i throw them into my clean SD CARD(yes i formatted them incase there's too much rubbish n updating wont catch e files i downloaded) and slot into the phone n power off my phone. now, hold the 3 buttons, vol + vol - & powerkey, n VIOLA! updating should start n yr phone is back to life!!
previously my phone lags, after installing the stock firmware and the kernel. everything went so smoothly, i reckon the default rom is an old version. so in short ******just download a proper stock rom & kernel for yr huawei, dont unzip, just throw them into SD card n update by holding down all the buttons . or maybe full battery 100% does e trick if you already know how to revive them. try both! Good luck !
Click to expand...
Click to collapse
when i trying to flash this error each thime
Failed remorte: command not allowed
Hello everybody,
since saturday I have a really big problem. Until now I tried to find a similar problem from an other person in the internet in order to fix mine but that was not possible.
So in my last hope I am now writing it down here. Hopefully someone can help me:
The phone was/is rooted and has TWRP as recovery installed (v3.21). The software is still the original EMUI.
On saturday my Huawei Honor 5x (Model KIW-L21) gave me the notification that there is an software update avaible. So I backuped everything with TWRP to my sd-card and copied it to the computer. After this I ran th eupdate. The update downloaded the new software, then rebootet to the recovery, installed the update.zip automaticly and rebootet again. Then there was written on the screen "Huawei software installing ... DO NOT unplug usb or press any key!". Also there was "0%" all the time. It did nothing. also the phone was not connected with usb.
After an hour I long pressed the power button. after two seconds there was the text "Warning: The powerkey is long pressed, please release powerkey to avoid system crash" displayed. I pressed it longer and the phone turned off.
Now I have the following problem. When the phone is turned off, I can:
press the power button: the phone starts, the "honor ... android" logo is shown but nothing more happens. ("fastboot devices" -> no devices found, "adb devices" -> device found but no permission to enter commands)
press the power button and the volume up button and the volume down button at the same time: normally this should take me in the recovery mode, mut it doesn't anymore. Instead the "EMUI" update screen is shown (see above "huawei software installing ..." with "0%") ("fastboot devices" -> no devices found, "adb devices" -> no devices found)
press the power button and the volume up button at the same time: I get a huawei menu with three buttons: "reboot", "wipe user cache" and "factory reset". I tried both (wipe and reset) wich both finished without an error. But nothing changes ("fastboot devices" -> no devices found, "adb devices" -> no devices found)
press the power button and the volume down button at the same time: I get an "eRecovery" menu from huawei with three buttons: "Reboot", "power off" and "Recover with latest software". The last button lets me connect to my wifi and then "searching for packages", with failes all the time. ("fastboot devices" -> no devices found, "adb devices" -> no devices found)
This problem occures with and also without the sd-card. Also there is no "update.zip" or "update.app" on the sd-card.
I really hope somebody can help me. I only need to get into the recovery. If I am there I can recover the backup or install a new ROM. That would be no problem for me. But at the moment I get nothing :crying:
Or maybe a tool to reset the phone completly? to start over from the beginning?
greetings,
Christopher
PS.: Thanks for your efford.
PSS.: Sorry for my bad english, I really try my best and hope that you understand what I am trying to say.
Same problem here... Please help us :'(
christopher2007 said:
Hello everybody,
since saturday I have a really big problem. Until now I tried to find a similar problem from an other person in the internet in order to fix mine but that was not possible.
So in my last hope I am now writing it down here. Hopefully someone can help me:
The phone was/is rooted and has TWRP as recovery installed (v3.21). The software is still the original EMUI.
On saturday my Huawei Honor 5x (Model KIW-L21) gave me the notification that there is an software update avaible. So I backuped everything with TWRP to my sd-card and copied it to the computer. After this I ran th eupdate. The update downloaded the new software, then rebootet to the recovery, installed the update.zip automaticly and rebootet again. Then there was written on the screen "Huawei software installing ... DO NOT unplug usb or press any key!". Also there was "0%" all the time. It did nothing. also the phone was not connected with usb.
After an hour I long pressed the power button. after two seconds there was the text "Warning: The powerkey is long pressed, please release powerkey to avoid system crash" displayed. I pressed it longer and the phone turned off.
Now I have the following problem. When the phone is turned off, I can:
press the power button: the phone starts, the "honor ... android" logo is shown but nothing more happens. ("fastboot devices" -> no devices found, "adb devices" -> device found but no permission to enter commands)
press the power button and the volume up button and the volume down button at the same time: normally this should take me in the recovery mode, mut it doesn't anymore. Instead the "EMUI" update screen is shown (see above "huawei software installing ..." with "0%") ("fastboot devices" -> no devices found, "adb devices" -> no devices found)
press the power button and the volume up button at the same time: I get a huawei menu with three buttons: "reboot", "wipe user cache" and "factory reset". I tried both (wipe and reset) wich both finished without an error. But nothing changes ("fastboot devices" -> no devices found, "adb devices" -> no devices found)
press the power button and the volume down button at the same time: I get an "eRecovery" menu from huawei with three buttons: "Reboot", "power off" and "Recover with latest software". The last button lets me connect to my wifi and then "searching for packages", with failes all the time. ("fastboot devices" -> no devices found, "adb devices" -> no devices found)
This problem occures with and also without the sd-card. Also there is no "update.zip" or "update.app" on the sd-card.
I really hope somebody can help me. I only need to get into the recovery. If I am there I can recover the backup or install a new ROM. That would be no problem for me. But at the moment I get nothing :crying:
Or maybe a tool to reset the phone completly? to start over from the beginning?
greetings,
Christopher
PS.: Thanks for your efford.
PSS.: Sorry for my bad english, I really try my best and hope that you understand what I am trying to say.
Click to expand...
Click to collapse
suzushima said:
Same problem here... Please help us :'(
Click to expand...
Click to collapse
to enter fastboot mode
1. Place the device in fastboot mode:
Turn off the device. (then wait for at least 2 seconds) For a mobile phone, press and hold the volume down and power keys simultaneously for at least 10 seconds (for a tablet, press and hold the volume up and power keys).
2. If the above operations do not switch the device to fastboot mode, please try the following steps:
Turn off the device. (then wait for at least 2 seconds) Then insert the USB cable and press and hold the volume down and power keys simultaneously for at least 10 seconds.
Step 2 worked for me every time
Arobase40 said:
AGAIN AND AGAIN, when you receive an update notification you MUST first flash back to stock recovery or it won't update with TWRP !!!
- To recover a stock recovery you need to boot onto download mode/your bootloader mode (Power+Volume Down) : plug your phone to your computer and type "fastboot flash recovery recovery.img".
From there you will loose your connexion with your computer. So unplug your phone and reboot manually holding down the Power button for some seconds.
If the system ever update your phone, BE VERY PATIENT !
The above note should probably part of a sticky !!!
If you don't get back to your Home screen and if you need TWRP back, reboot again onto download mode/your bootloader mode (Power+Volume Down) : plug your phone to your computer and type "fastboot flash recovery twrp.img" (or whatever the custom recovery name).
Click to expand...
Click to collapse
The problem a lot of people were having is TWRP flashed enough of the update that they lost custom recovery and had no way to get to the bootloader / fastboot ... that's why I posted the instructions above and in about 4 other threads.
Did you ever get your phone updated ?
Arobase40 said:
AGAIN AND AGAIN, when you receive an update notification you MUST first flash back to stock recovery or it won't update with TWRP !!!
Click to expand...
Click to collapse
I did not knew this one. Thanks a lot.
Thanks to @clsA I found the stock recovery here and I will try it:
https://www.androidfilehost.com/?w=files&flid=49383
clsA said:
1.Turn off the device. (then wait for at least 2 seconds) For a mobile phone, press and hold the volume down and power keys simultaneously for at least 10 seconds (for a tablet, press and hold the volume up and power keys).
2. If the above operations do not switch the device to fastboot mode, please try the following steps:
Turn off the device. (then wait for at least 2 seconds) Then insert the USB cable and press and hold the volume down and power keys simultaneously for at least 10 seconds.
Click to expand...
Click to collapse
Working great thanks a lot!
"fastboot & rescue mode" with a working usb connection.
What is the next step? If I now flash the stock recovery, does the phone manages to finish the system update?
Or should I flash the twrp recovery and not the stock revocery?
greetings,
Christopher
EDIT:
I flashed the stock recovery and also the twrp recovery. both times i startet the phone and hoped the installation of the new software will go on. But it didn't.
So my problem is still resistant. so what can I do? How do I stop the update from blocking my recovery? I do not need the update. maybe I can reset my device with the fastboot access somehow?
christopher2007 said:
I did not knew this one. Thanks a lot.
Thanks to @clsA I found the stock recovery here and I will try it:
https://www.androidfilehost.com/?w=files&flid=49383
Working great thanks a lot!
"fastboot & rescue mode" with a working usb connection.
What is the next step? If I now flash the stock recovery, does the phone manages to finish the system update?
Or should I flash the twrp recovery and not the stock revocery?
greetings,
Christopher
EDIT:
I flashed the stock recovery and also the twrp recovery. both times i startet the phone and hoped the installation of the new software will go on. But it didn't.
So my problem is still resistant. so what can I do? How do I stop the update from blocking my recovery? I do not need the update. maybe I can reset my device with the fastboot access somehow?
Click to expand...
Click to collapse
All the full updates are in the file depot
Use stock recovery plus the full update for your version.
You have to hold volup + voldown + power to start the update
Refresh TWRP / Root and your good to go
Sent from my KIW-L24 using Tapatalk
clsA said:
All the full updates are in the file depot
Use stock recovery plus the full update for your version.
You have to hold volup + voldown + power to start the update
Refresh TWRP / Root and your good to go
Click to expand...
Click to collapse
I found the stock recovery at https://www.androidfilehost.com/?w=files&flid=51004 but I have no idea what update I must use and how to use it.
Could you please give me a concrete link with a little introduction? Do I have to copy the update file to my sd-card? or do I have to use the "fastboot update *" command?
(Most of the files are for "KIW-L24" but I have a "KIW-L21" ... is there a significant difference? Od do I can use also the other files?)
Also, don't I have to stop the wrong update first?
greetings,
Christopher
EDIT:
I tried these "UPDATE.APP":
http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684
http://www.androidvillaz.com/2016/0...honor-5x-to-stock-lollipop-firmware-b130.html
both did not work. I copied them into the "dload" folder in the root of the sd-card and started the phone with volup+coldown+power.
The only thing the phone said was "Software install failed! ... Press powerkey to conrifm ... Shutdown system now".
christopher2007 said:
I found the stock recovery at https://www.androidfilehost.com/?w=files&flid=51004 but I have no idea what update I must use and how to use it.
Could you please give me a concrete link with a little introduction? Do I have to copy the update file to my sd-card? or do I have to use the "fastboot update *" command?
(Most of the files are for "KIW-L24" but I have a "KIW-L21" ... is there a significant difference? Od do I can use also the other files?)
Also, don't I have to stop the wrong update first?
greetings,
Christopher
EDIT:
I tried these "UPDATE.APP":
http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684
http://www.androidvillaz.com/2016/0...honor-5x-to-stock-lollipop-firmware-b130.html
both did not work. I copied them into the "dload" folder in the root of the sd-card and started the phone with volup+coldown+power.
The only thing the phone said was "Software install failed! ... Press powerkey to conrifm ... Shutdown system now".
Click to expand...
Click to collapse
if the update.app doesn't work you'll have to flash TWRP and the Stock Rom and wait like everyone else that's stuck trying to update the L21
clsA said:
if the update.app doesn't work you'll have to flash TWRP and the Stock Rom and wait like everyone else that's stuck trying to update the L21
Click to expand...
Click to collapse
The only way I know to flash a ROM, is to go over TWRP.
So I now did the following:
Phone power off
connect to pc
voldown+power
in the fastboot flash the recovery from twrp
shutdown
copy the "customromtemplate-5x-plk21-b130-r3.zip" to the sd-card
volup+coldown+power what normally starts twrp, but only the huawei update manager is shown
I only need twrp, no update and nothing else.
What options do I have left, because "flash a ROM" is not working ...
How can I stop this terrible update that is blocking my twrp?
greetings,
Christopher
christopher2007 said:
The only way I know to flash a ROM, is to go over TWRP.
So I now did the following:
Phone power off
connect to pc
voldown+power
in the fastboot flash the recovery from twrp
shutdown
copy the "customromtemplate-5x-plk21-b130-r3.zip" to the sd-card
volup+coldown+power what normally starts twrp, but only the huawei update manager is shown
I only need twrp, no update and nothing else.
What options do I have left, because "flash a ROM" is not working ...
greetings,
Christopher
Click to expand...
Click to collapse
are you flashing TWRP ?
you enter recovery with Volume up and Power
in TWRP you choose Install then choose customromtemplate-5x-plk21-b130-r3.zip
swipe to flash when it's done reboot
and your rom should load
clsA said:
are you flashing TWRP ?
you enter recovery with Volume up and Power
in TWRP you choose Install then choose customromtemplate-5x-plk21-b130-r3.zip
swipe to flash when it's done reboot
and your rom should load
Click to expand...
Click to collapse
I flashed TWRP using "kiwi_twrp_3-21_recovery.img". I also used this one last time (one month ago) and it worked then and also now.
Flashing was successful, but when I press volup+power I get a huawei menu.
At the top there is the "EMUI" circle and below there are three buttons:
Reboot system now
Wipe data/factory reset
Wipe cache partition
I can move around in this little menu by using the volume keys.
But this is not TWRP.
And normally I enter the recovery by using volup+voldown+power. But this is currently blocked by the update progress from huawei.
greetings,
Christopher
christopher2007 said:
I flashed TWRP using "kiwi_twrp_3-21_recovery.img". I also used this one last time (one month ago) and it worked then and also now.
Flashing was successful, but when I press volup+power I get a huawei menu.
At the top there is the "EMUI" circle and below there are three buttons:
Reboot system now
Wipe data/factory reset
Wipe cache partition
I can move around in this little menu by using the volume keys.
But this is not TWRP.
And normally I enter the recovery by using volup+voldown+power. But this is currently blocked by the update progress from huawei.
greetings,
Christopher
Click to expand...
Click to collapse
You still have stock recovery
Flash TWRP -
fastboot flash recovery kiwi_twrp_3-21_recovery.img
Do not reboot the phone
Hold power plus volup and TWRP should load.
Now flash your rom
Sent from my KIW-L24 using Tapatalk
clsA said:
You still have stock recovery
Flash TWRP -
fastboot flash recovery kiwi_twrp_3-21_recovery.img
Do not reboot the phone
Hold power plus volup and TWRP should load.
Now flash your rom
Sent from my KIW-L24 using Tapatalk
Click to expand...
Click to collapse
C:\adb>fastboot flash recovery kiwi_twrp_3-21_recovery.img
target reported max download size of 266338304 bytes
sending 'recovery' (45196 KB)...
OKAY [ 1.442s]
writing 'recovery'...
OKAY [ 0.703s]
finished. total time: 2.148s
I now flashed this more then ten times ... but with power+volup I still get the EMUI menu.
christopher2007 said:
C:\adb>fastboot flash recovery kiwi_twrp_3-21_recovery.img
target reported max download size of 266338304 bytes
sending 'recovery' (45196 KB)...
OKAY [ 1.442s]
writing 'recovery'...
OKAY [ 0.703s]
finished. total time: 2.148s
I now flashed this more then ten times ... but with power+volup I still get the EMUI menu.
Click to expand...
Click to collapse
Are you rebooting from the fastboot screen?
From the white boot loader screen hold volume up and power for 15 seconds
Sent from my KIW-L24 using Tapatalk
clsA said:
Are you rebooting from the fastboot screen?
From the white boot loader screen hold volume up and power for 15 seconds
Click to expand...
Click to collapse
The last six hours I tried to fix my phone ... again. One thing I did really helped a little:
Target1920 said:
http://forum.android.com.pl/topic/205126-instalacjaodzyskiwanie-systemu-rom-za-pomoca-fastboot/
This is the polish version of manual, I will write you how to do it:
1. Download ADB and Fastboot
2. Extract to c:/adb
3. Download from this thread firmware for you (extracted version!) http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 If you have problem what firmware you have to install, take look at the back side of phone, at the down you will se KIW-L21 or 24 (or another). Copy all files to adb folder
4. Rund adb program
5. Write in the command line: cd c:/adb
6. Connect phone to usb to download mode (power and vol- combination)
7. Write in fastboot command: fastboot flash recovery recover.img (or recovrey .img, see the file and type it name) - wait for install
8. And now: If the flash is succesfull, reboot the phone to recovery (power and volume+) and wipe all data. Phone have to work.
But if flash is not succesfull, plug again usb with download mode
9. Write this commands: fastboot flash cust cust.img -wait for install
and: fastboot flash system system.img -also wait, system.img can took a while
10. Now you will enter recovery and wipe all data
11. Again plug usb cable and install firmware with those commands:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
Click to expand...
Click to collapse
With this I am not able to start my phone again. It will boot normally and I have a clean android. No userdata and no root.
So I now did the same like last month:
Unlock OEM -> not necessary, because it is already unlocked
install twrp with fastboot
reboot to twrp and there it is again
I did exactly what you said and also I did exactly the same thing I did last month but both times there is the same result: TWRP will not show up.
The "stock recovery" is blocking twrp in some sort of way. I can do whatever I whant ... volup+power out of the fastbook mode, or with "adb reboot recovery", or other ways ... twrp will not show up.
How is this possible? I also tried different twrp images. (The "kiwi_twrp_2-27_recovery.img" and "kiwi_twrp_3-21_recovery.img" out of your repository, and also the "twrp-3.0.0-0-kiwi.img" and "twrp-3.0.2-0-kiwi.img" from the twrp website itself ... always the same result: no twrp)
I am really at the end of my knollage
greetings,
Christopher
christopher2007 said:
The last six hours I tried to fix my phone ... again. One thing I did really helped a little:
With this I am not able to start my phone again. It will boot normally and I have a clean android. No userdata and no root.
So I now did the same like last month:
Unlock OEM -> not necessary, because it is already unlocked
install twrp with fastboot
reboot to twrp and there it is again
I did exactly what you said and also I did exactly the same thing I did last month but both times there is the same result: TWRP will not show up.
The "stock recovery" is blocking twrp in some sort of way. I can do whatever I whant ... volup+power out of the fastbook mode, or with "adb reboot recovery", or other ways ... twrp will not show up.
How is this possible? I also tried different twrp images. (The "kiwi_twrp_2-27_recovery.img" and "kiwi_twrp_3-21_recovery.img" out of your repository, and also the "twrp-3.0.0-0-kiwi.img" and "twrp-3.0.2-0-kiwi.img" from the twrp website itself ... always the same result: no twrp)
I am really at the end of my knollage
greetings,
Christopher
Click to expand...
Click to collapse
First off thanks for the very informative post.
Without actually having the phone in my hands I'm also stumped at what to try next.
After flashing TWRP and still in the boot loader unplug the USB before you reboot with power and volume up.
That's all I can think of right now
Sent from my KIW-L24 using Tapatalk
--
clsA said:
First off thanks for the very informative post.
Without actually having the phone in my hands I'm also stumped at what to try next.
After flashing TWRP and still in the boot loader unplug the USB before you reboot with power and volume up.
That's all I can think of right now
Sent from my KIW-L24 using Tapatalk
Click to expand...
Click to collapse
I must thank you for all your help
So I now read some more articles and tried some things. So there are old problems solved, but also new problems came up:
For me it is no longer possible to flash a recovery that is permanent. I have no idea why but I am ignoring it, because I can start the phone with voldown+power into bootloader and then use a usb-connection to enter the following command:
fastboot boot twrp-3.0.2-0-kiwi.img
Click to expand...
Click to collapse
So i can enter twrp temporary and because I do not need TWRP this often, that is ok for me.
BUT:
with the extracted "UPDATE.APP" and flashing some "*.img" files manually (see my last post), I have a more or less working "L21C432B130" version of android.
So now there is everything original (recovery, system, ...).
The update to "L21C432B140" is still not working. But that is also something I can live with.
So now I whant to restore my old system in order to have my old data/apps/... .
So I enter my temporary TWRP, go to Restore and select my old backup. Then the restore starts. Restoring EFS, Restoring efs2, Restoring Recovery, Wiping System and Formatting System using make_ext4fs. All of this in this order are successful. But the last operation "Restoring Data" failes with the following error message:
extractTarFork() process ended with error 255
Click to expand...
Click to collapse
So I searched on xda and found out, that this could be ANYTHING. I tried five or six different methods in order to fix it. In the end I am not sure what really fixxed it, but now I can restore my old update without any error. The phone now runs and I have all my old data.
There are four main differences on my phone to the time before I tried that damn update:
1. I have less internal storage
2. I have no TWRP permanently avaible
3. I can not Factory-Reset
4. I can not use a "UPDATE.APP" inside a "dload" folder on the sdcard
(the last two things always failes)
But as long as the android system now runs smooth again I can live with these things.
Is there maybe anything else I should be careful? maybe a known bug/problem that I have not seen yet?
The reason why I wanted to update in the first place was, that I have problems with my sd-card.
Some Apps do not allow to use the external storage. Easy Voice Recorder is the main problem. But also the Call Recorder has problems with it.
Is this a well known bug? Does a update helps? And if so, how do I update? (Now I know how to rescue my phone, so I could try it again xD )
Or does this problem gets solved with an custom ROM? If so, what good custom ROMs are out there for the honor 5x?
Or is this a problem that is not possible to fix on the honor 5x? Because these apps does not have this problem on my HTC One M9 ...
And thanks again so much for all your help
greetings,
Christopher
christopher2007 said:
I must thank you for all your help
So I now read some more articles and tried some things. So there are old problems solved, but also new problems came up:
For me it is no longer possible to flash a recovery that is permanent. I have no idea why but I am ignoring it, because I can start the phone with voldown+power into bootloader and then use a usb-connection to enter the following command:
So i can enter twrp temporary and because I do not need TWRP this often, that is ok for me.
BUT:
with the extracted "UPDATE.APP" and flashing some "*.img" files manually (see my last post), I have a more or less working "L21C432B130" version of android.
So now there is everything original (recovery, system, ...).
The update to "L21C432B140" is still not working. But that is also something I can live with.
So now I whant to restore my old system in order to have my old data/apps/... .
So I enter my temporary TWRP, go to Restore and select my old backup. Then the restore starts. Restoring EFS, Restoring efs2, Restoring Recovery, Wiping System and Formatting System using make_ext4fs. All of this in this order are successful. But the last operation "Restoring Data" failes with the following error message:
So I searched on xda and found out, that this could be ANYTHING. I tried five or six different methods in order to fix it. In the end I am not sure what really fixxed it, but now I can restore my old update without any error. The phone now runs and I have all my old data.
There are four main differences on my phone to the time before I tried that damn update:
1. I have less internal storage
2. I have no TWRP permanently avaible
3. I can not Factory-Reset
4. I can not use a "UPDATE.APP" inside a "dload" folder on the sdcard
(the last two things always failes)
But as long as the android system now runs smooth again I can live with these things.
Is there maybe anything else I should be careful? maybe a known bug/problem that I have not seen yet?
The reason why I wanted to update in the first place was, that I have problems with my sd-card.
Some Apps do not allow to use the external storage. Easy Voice Recorder is the main problem. But also the Call Recorder has problems with it.
Is this a well known bug? Does a update helps? And if so, how do I update? (Now I know how to rescue my phone, so I could try it again xD )
Or does this problem gets solved with an custom ROM? If so, what good custom ROMs are out there for the honor 5x?
Or is this a problem that is not possible to fix on the honor 5x? Because these apps does not have this problem on my HTC One M9 ...
And thanks again so much for all your help
greetings,
Christopher
Click to expand...
Click to collapse
from your current state you can try flash recovery with TWRP by choosing install / image / your version of TWRP / choose recovery / swipe to flash
Now choose reboot / recovery
As for the sdcard try the sdcard fix for kit Kat in the play store. It works for some older apps.
Sent from my KIW-L24 using Tapatalk
Arobase40 said:
If you mean getting my phone updated to KIW-L21 B140, no I still don't get it !
But I did try with KIW-L24 B151 with the result I already mentioned previously : almost bricked... ^^
But I always managed to get into Bootloader/Fastboot to flash back any kind of recovery...
Click to expand...
Click to collapse
clsA said:
All the full updates are in the file depot
Use stock recovery plus the full update for your version.
You have to hold volup + voldown + power to start the update
Refresh TWRP / Root and your good to go
Sent from my KIW-L24 using Tapatalk
Click to expand...
Click to collapse
So i have this issue too. im so stupid for doing this. I can go into fastboot mode and i flashed stock recovery and when i rebooted into recovery it still said that it was updating the firmware. I flashed twrp after that and it had the same message. am i doing something wrong or is it my phone? I tried rebooting into bootloader using adb but only fastboot will reconize my phone so adb also wont work. could you guys maybe help me?
Edit: Yessss. i got it using the temporary command. Thank you guys all for your help. it was so stupid of me to flash it with twrp still on it. Thank you all very much
I've found a way to boot directly into bootloader/fastboot mode.
Press simultaniously the Vol+ and the power button until the red light lit up. Then instantly leave the two buttons and press the Vol- button until you see the fastboot menu. You're done!!
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Boutchoo said:
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Click to expand...
Click to collapse
I see you don't get it. Up to now the only way to get into fastboot was via "adb reboot bootloader". Or from a successfully installed TWRP.
The "for years" known combinations will get you only into Recovery (Power + Vol up), FTM (Power + Vol down), or into EDL respective the useless DFU mode (Power + Vol up + Vol down). In case you've killed your recovery and your bootimg you now have a additional option to come back to a functional system. Especially for the A2017g with the useless DFU mode.
Can anyone with bricked A2017G confirm?
Controllerboy said:
Can anyone with bricked A2017G confirm?
Click to expand...
Click to collapse
Confirmed NOT WORKING .
It doesn't matter if it's working or not. Thanks for the info anyway.
Neither stock recovery nor fastboot will help if you're stuck in DFU mode for G model. You can't do anything to recover the device in neither mode. All what helps is previously had enabled "allow BL unlock" in developer options. This gives you the possibilty to flash a stock ROM from external SD card. It still needs to be aproved from a bricked "DFU" user!
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
Would you kindly tell us what is not working? Don't you see the menu? Or don't you know what to do with fastboot?
In case you managed it to get into fastboot the next step would be to get into edl by using this trick. -->
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
@tron1, all this does not work. I tried cause I had a bricked (DFU) device. I needed to send it in for repair. And gues: they changed the motherboard.
Even the fastboot_edl results in "remote unknown command". Nearly all commands in fastboot for Axon 7 are disabled bei ZTE.
I will try if it's possible to reboot to edl with the fastboot from the unlock procedure from drakenfx.
forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
ZTE crippled the loader in a bad ass way. But they left the flash command inside. So it should be possible to flash at least a working recovery to the system if you manage it to get into bootloader. As long as my phone is working I won't try it on it. So volunteers!!
Hint -->
fastboot flash <partition> [ <filename> ] write a file to a flash partition
fastboot erase <partition> erase a flash partition
I there a way recover such a bricked device?
I could only boot into bootloader. If i choose boot recovery the phone only shows a red light.
If i choose start its the same red light.
Or should i contact ZTE for a new phone?
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
I have bricked my Axon 7 several times this weekend, but new Qualcomm chipsets are unbrickable!!!!
1. There is a way to enter directly to EDL on most Qualcomm devices and works also in the Axon 7. Just ensure your phone is off, then press the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, otherwise the phone will turn on.
2. Plug your phone to your computer. Windows 10 should detect a new USB device QUSB_BULK without any warning message. Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TWRP).
After that, you will be able to enter into recovery, do a factory reset and then you will be able to restore de initial image from an SD formatted as FAT32 (no, exFAT is not supported by stock recovery) in case of stock recovery. Sideload will not work, always stop before finishing the transmission.
Oki, this is fine for you because you have the US version of the Axon the rest of the axon World is f..ed up with an useless so called DFU mode. Happy Birthday for your Axon.
Sent from my ZTE A2017G using XDA Free mobile app
Oki said:
... unbrickable!!!! ...
... ress the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, o ...
... Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TW ...
Click to expand...
Click to collapse
That did the trick. Thanks
Any idea on why when i tried to enter bootloader mode on my Axon 7 (that i received 1 week ago), it stays on ZTE logo and nothing else happens... What is weirder is that there's a red light and my computer detect it when i do "fastboot devices" but i can't unlock the bootloader...
I tried to downgrade on B02 firmware and nothing... i'm beyond going insane right now.... :-/ It's like ZTE blocked on purpose the access to the bootloader mode...
I restored full backup from TWRP because my phone is bootloop.
However Restore error
"extractTarFork() process ended with ERROR=255" at "modem_fw" partition.
I don't have other full backup, so I try to reboot.
Then my phone never response.
I connected USB and pushed Vol- Power button more than 30 sec to go to bootloader, but no response.
Pushing Vol+ Power button and Vol+- Power button is same.
LED next to front camera is also no response.
I tried dload method that I place UPDATE.APP in "dload" folder at the root of external SD card and push Vol+- Power button but no response.
To sum up, no adb no fastboot.
Can anyone fix my phone?
Sorry for my bad English.
Hey, I have a similar problem to you. Badly uploaded modem_fw and the phone only starts to fastboot. I tried to upload every possible partitions through fastboot without success
Any help?
i had something similar. tried to restore an backup with a encrypted data partition. try to boot erecovery somehow. usually wait until screen comes that says the device has been unlocked, and there are several boot modes for you to select. choose option 1 (volume up) to boot eRecovery, do a full factory reset (that erecovery will download the firmware via wifi. never seen something great like this). after it finished downloading and flashing you should be able to boot android. the erecovery also appears if it detects something strange, for example when you restore a valid backup. but then you can just choose reboot and it will be fine.
in order to make a valid twrp backup, you have to disable force encryption. get/extract the stock ramdisk on your system, open magisk manager, untick both checkboxes, tap install magisk and choose to patch your ramdisk image. once done, flash the patched file via fastboot to the "ramdisk" partiton. then you will never ever have any trouble with twrp again.
Gesendet von meinem ANE-LX1 mit Tapatalk
Hey FalkorTV, How do you start fastboot?
What button do you press?
If you can start fastboot, you can boot recovery.
fastboot reboot recovery
As gordon0001 said, you can do factoryreset.
you can also try dload method.
My phone starts immediately in fastboot mode. I can't boot recovery using this command. This command not found on my version fastboot.exe
Phone not booting to huawei logo, only fastboot mode when connecting the cable to the telephone.
Any help method?
if u have fastboot working, then extract stock recovery from updater.app flash stock recovery to recovery_ramdisk u need stock recovery first, then u can use the fastboot command mentioned above fastboot reboot recovery, then wipe all, then make a restore tru wifi .
---------- Post added at 11:08 AM ---------- Previous post was at 11:06 AM ----------
spmz1234 said:
I restored full backup from TWRP because my phone is bootloop.
However Restore error
"extractTarFork() process ended with ERROR=255" at "modem_fw" partition.
I don't have other full backup, so I try to reboot.
Then my phone never response.
I connected USB and pushed Vol- Power button more than 30 sec to go to bootloader, but no response.
Pushing Vol+ Power button and Vol+- Power button is same.
LED next to front camera is also no response.
I tried dload method that I place UPDATE.APP in "dload" folder at the root of external SD card and push Vol+- Power button but no response.
To sum up, no adb no fastboot.
Can anyone fix my phone?
Sorry for my bad English.
Click to expand...
Click to collapse
hold power button for 115sec. so its definnetly powerd off, then hold vol - and while holding insert usb cable, if that doesnt bring u into fastboot ur pretty much f*****
Don't Work, i try flash any file from update.app And i can't turn on to show Huawei logo. Phone only booting to fastboot when plug the cable to pc
gordon0001 said:
i had something similar. tried to restore an backup with a encrypted data partition. try to boot erecovery somehow. usually wait until screen comes that says the device has been unlocked, and there are several boot modes for you to select. choose option 1 (volume up) to boot eRecovery, do a full factory reset (that erecovery will download the firmware via wifi. never seen something great like this). after it finished downloading and flashing you should be able to boot android. the erecovery also appears if it detects something strange, for example when you restore a valid backup. but then you can just choose reboot and it will be fine.
in order to make a valid twrp backup, you have to disable force encryption. get/extract the stock ramdisk on your system, open magisk manager, untick both checkboxes, tap install magisk and choose to patch your ramdisk image. once done, flash the patched file via fastboot to the "ramdisk" partiton. then you will never ever have any trouble with twrp again.
Gesendet von meinem ANE-LX1 mit Tapatalk
Click to expand...
Click to collapse
I had a similar problem and using the eRecovery to do a full factory reset that you mentioned didn't fix the problem my device just gets sent back to the eRecovery still. By the way my device is not the Huawei P20 Lite, it's the Huawei MediaPad T5.
nofx161 said:
if u have fastboot working, then extract stock recovery from updater.app flash stock recovery to recovery_ramdisk u need stock recovery first, then u can use the fastboot command mentioned above fastboot reboot recovery, then wipe all, then make a restore tru wifi .
---------- Post added at 11:08 AM ---------- Previous post was at 11:06 AM ----------
hold power button for 115sec. so its definnetly powerd off, then hold vol - and while holding insert usb cable, if that doesnt bring u into fastboot ur pretty much f*****
Click to expand...
Click to collapse
Hi to everyone..i need a great help..after a forced reboot (hold power button for 15 sec) my huawei p20 lite has gone in boot loop..i can see only the huawei logo, and sometimes it reboot for see the huawei logo again..don't want go into recovery and in others mode..the only mode that works it's fastboot..i don't want lose my data, can i reflash the firmware without wipe data? really thanks..sorry for my bad english.. ps. the phone is total stock with bootloader locked...thanks..
After flashing my phone back to stock using TWRP and LG-H85030a-Flashable.COMPLETE.zip, I tried to install magisk. Unfortunately TWRP crashed at that moment.
Since then every time I do ADB reboot recovery from my phone, I get the No command screen with the android on its back.
I tried to following things to solve this:
- Press the volume up (15 sec) + power in recovery
- Press the power 3 sec + volume up in recovery
- Reflash the phone using LGUP and multiple KDZ using upgrade with multiple versions (6.0 - 7.0 -8.0)
- hard resetting phone (clear all user data)
Unfortunately LGUP does not let me choose the refurbish option. I checked my phones IMEI and I'm supposed to have ITA region, but even with the the ITA 6.0 rom H85010i_00_OPEN_EU_OP_0923.kdz I cannot choose refurbish.
I tried LGUP 1.11 with the dlls and LGUP1.14 with UPPERCUT.
I would really like to root this phone but without fast boot this seems now impossible. Does anybody have any suggestion on how to resolve this issue?
Hey guys,
Not sure how I can delete this message, I found a way around my problem.
Turn off device.
Press volume down, put USB cable into power plug.
And it booted in fastboot. From there I could install TWRP.