Hello,
I have a Wiko Jimmy (MTK MT6582) but an update with OTA just bricked my android phone.
I have acces to the recovery menu ( Android system recovery < KOT49H).
I tried the wipe data/factory reset , wipe cache partition and then reboot system but it didn't work.
When I tried to mount my device on my computer , it just didn't work like I thought ( ADB works but I cannot access to the device) :
so I cannot flash the phone : even with SP_Flash_Tool (It didn't detect the phone) or Wiko official program (It didn't detect the phone)
When I tried commands like adb shell , I got the error : closed.
The best choice is thus the option "apply update from ADB".
The only problem is I didn't have a flashable rom to try. No dev has developped a custom rom
Any idea ? I think I would become crazy XD ( I have installed the drivers)
Related
well, i was clean installing Xperia STE CM 11 pepper ROM. I was already using the same earlier , but wanted to do a fresh install
Anyways, i entered TWRP, and Advanced WIPE everything , including sd-card, Android Secure , data, system , cache & alll .
well , then i thought after rebooting i would just flash the ROM. ZIP as usual, but my phone is now stuch at SONY logo, and i am unable to enter TWRP.
So i tried to fastboot boot.img , and it was successful , but still when i try to flash directly the ROM.zip , using
fastboot flash zip <rom.zip>
it sends , but then returns with an error
FAILURE <remote : Partition not found>
then i tried to use this recovery http://forum.xda-developers.com/xperia-u/sola-development/recovery-twrp-2-7-0-0-touch-recovery-t2683495
this returns me with error " daemon not running, starting it now on port 5037"
I also cant use ADB properly , my device isn't listed when i command adb devices
error : device not found.
( however lter on while doing the same via Flashtool , it does clarifies the reason that USB Debugging is turned off..so maybe that's why ADB is not working)
My laptop has win 7 , i double checked that i have all the necessary ADB and device specific usb drivers, and Under DEVICE MAnager Tab ,
so please tell me how to solve this...Android ADB Composote device is listed working properly.
So after that , i flashed this Kernel via fastboot Out Of desparation http://forum.xda-developers.com/xperia-u/sola-development/kernel-t2075093 [Sola] [CWM Touch] [6.1.1.B.1.54] [Unlocked Bootloader
and it worked , i mean i was able to enter CWM and navigate properly there, but i dont want to run stock firmware ICS again.
(also there i Explored my Internal SD Card , and it's completely empty)
So then i again flashed the boot.img from http://forum.xda-developers.com/xperia-u/sola-development/rom-cyanogenmod-11-t2743059 [ROM] [UB] [XperiaSTE] CyanogenMod 11
And well , the result is yet the same, my phone boots up and stays at SONY Logo, no LEDs flashing changing colors as it did earlier, and i cant enter TWRP , Neither can't i flash cm.11.0-12-pepper.zip via fastboot, it returns with error regarding messed up partitions.
also , i tried to explore/open Decompile the provided "boot.img" with PowerISo , ImgBurn , etc. and each says that the file is either damaged or corrupted.
MAYBE , that's the reason why me & many others aren't able to boot into recovery, there is something wrong with the boot.img of this rom , however i will try flashing Other ROM's Boot.img tomorrow.
I urge the developers to please look into that as you are our only saviors.
So my Questions now are
1. what should i do get a working CM 11 kk ROM for my device ?
2. Is my device Bricked ( because i am doubtful on that one, as i can connect it in fastboot as well as flashmode) ?
3. How to Create/repair the partitions , that CMD says are euther damaged or not found ?
4.Will flashing my stock firmware 6.1....54 , via FLashtool , solve all this & by solving i mean getting CM11 to work again . ?
PLease someone do reply , as i live in a remote town and i am all on my own completely. ThankS.
Try to use Xperia Sola AOSX ROM boot.img, then install cm11.
Try new version
Hello community ! (Sorry for my english) = (^ _-) =
Is there an expert in Android here ? ...
I expose my problem.
A friend of mine handed me his family tablet (Lenovo S6000 Android 4.2.2 Jellybean, Kernel 3.4.5, MT 6589, 16Gb)
According to her, it did not seem to want to normally boot.
No backup, no update, no bootloader ... no root ...
So I took the animal home and I check and try the following ....
1) Power ON the device ==> OK
2) Result device ==> frozen on the logo "Lenovo" indefinitely
3) Recovery Mode Android (3rd) ==> Reboot system (the same as the line 2)
4) Recovery Mode Android (3rd) ==> Wipe Data / Factory Reset Wipe Cache Partition + Reboot System
5) Android Logo slept with exclamation point (no command )
6) Recovery Mode Android ==> Reboot System
7) Android Logo standing with "Effacement en cours" (erasing data ) and boot in loop
8) Factory Menu in Chinese ==> All tests buttons, displays and touch are OK (except the WIFI) + Technical information of the device Reboot System
That's where I am right now!
To date I have access has three kinds of pages on the tablet:
1_ Android Recovery Mode <3>: Reboot, ADB, sdcard, Wipe Data, Factory Reset, Wipe Partition
* Reboot system ==> After Reboot, Android Logo standing with "current Erase" then reboot in loop
* Upadate ADB ==>Tablet not recognized on my computer ... So no interaction between the tablet and the PC
* Update sdcard ==> Only possibility to inject anything on this tablet
* Update from Cache ==> No data
* Wipe Data / Factory Mode ==> Display ok => YES - delete all user data (no change)
* Wipe Cache Partition ==> OK (No change)
2_ Page "META MODE": What and how is it ????
3_ factory Chinese Menu: All test performed successfully +/- (except wifi)
No recognition of the device when connected to the PC .... Device Manager does not detect anything ... Yet Lenovo drivers & android USB drivres are installed!
No possibility to install drivers "Android_CDC_Driver" because again nothing appears in the Device Manager!
... From obliged to drop the tablet resting on the USB cable just for to power ...
Is it possible to do everything via the SD card if the tablet was not "prepared" before ???
I own the firmware, the ROM and the Open Source Code s6000.
The difficulty for me is going to be Android Jellybean 4.2.2 reinject power via "Apply update from Sdcard" because there seems to also be a problem as with the USB jack on the tablet: /
So exit the ADB or Fastboot ... the Root, ect ... well I think ...
The only problem is that my skills stop there!
Allo Doctor ???
Thanks in advance !
Hi there,
Probably you won't see that but... I was in this situation as well, finally I fixed installing again a new ROM. Take a look to this link
https://forum.xda-developers.com/showpost.php?p=73351701&postcount=166
Kindly iam asking for xda help
I hav Archos 50c Platinum
Android ver lollipop 5.1
Builde number ( [email protected] )
It comes with chines menu in recovery mode ... i tried to install English cwm recovery img by flash tool named (flashify) ... the phon made restart to get into recovry mode and failed to install the img then it has been restarted and the phon working normaly but with two issues .... first is every time after system starts up it shows error messege (update failed this should be a temporary issue .. we'll retry later) .....the second issue is that i can't enter recovery mode any more ... even withe hard method or software tools from the android system ... whenever i try to enter recovery mode it freezs in startup logo ... then i have to reboot it and it starts successfully .
i would like any help by pc or through apk app ... but pc not available for me now ... please try to make help without pc .
And thank you in advance .
If you can get to fastboot, just grab a rom from NeedRom, flash it and away you go.
Hi there,
I have a problem with my wiko rainbow 4G, it's soft-bricked.
This happend while i was trying to update the software (normal notification, official update). It just rebooted into recovery.
I'm stuck there now and tried several thing like: adb side-load (transfers files, but always returns: intallation aborted, Updating from sd card (same error), factory reset and clear cache did nothing.
While in recovery my phone only shows up as an sideload adb device (in adb interface). I don't know how to get into fastboot to install custom recovery either, tried both power + up and/or down volume buttons.
Also most guides ask me to use a flash tool, but these don't do anything. The official software doesn't detect the phone (neither in normal, sideload or recovery state.
I am left clueless, please help
Thanks
Welcome dear xda_dev user,
Model:Prestigio Multiphone 5451 DUO
My device in the past months stuck in a boot-loop, and.. I googled for loads of threads to read,but they don't really help.
This is what the phone do, and not do:
Can/Works:
ADB sideload (PC see the device!)
Stock Recovery Menu
Can turn off/on the device,screen vibration,etc. works.
No/Not Works:
Can't listen to ADB while booting.
NO TWRP and other Recovery menus installed, only the stock android one.
NO official ROMs available from this company.
Click to expand...
Click to collapse
This is what I tried:
Tried to load 1-5Mb "firmware" updates via ADB Sideload /throwing permission problems/
Tried to Wipe data/cache /didn't boot after this/
Tried to unplug battery <- make it 0% (uncharge)
Tried to load non-company driven ROMs via ADB /permission problems/
Click to expand...
Click to collapse
NO official ROMs available from this company, I asked them to share, but they said I need to go a city (200km) away from me who have "authorized access"..
I kept this thread as simple as possible, BTW I have bought a new device, I still need this mobile because it still worth $50 I think..
Thank you if you can help, and ignore the grammar problems.
Not sure if these are legit firmware files for the duo but seeing you are in this fix it is worth a look i think
https://androidmm6.com/deviceinfo_1701.html
http://www.needrom.com/download/prestigio-pap-5451-duo/
Probably Scam/fake.
The file (rar) is locked via password and it's nowhere published, and it's only 1.65Mb so not really a ROM.
Anyways, I star you up for first and probably last replyer.
If you are able to sideload , then i think you can recover your phone in no time.
First I need you need to know that this procedure is complicated but You can recover your device.
go to mtkroms.com and Download any rom from there as per your wish.
-Remove boot.img from zip file and save it else where
-Sideload the rom
-After sideloading ,reboot device into fastboot by pressing power and both volume keys together until Boot Menu appears where you have the choice to Normal Boot , Boot into Fastboot(Bootloader) and Boot into recovery.
-Use Volume Down to navigate to Fastboot and press Volume Up (or Power button in some devices)
-After booting into fastboot , extract boot.img from .zip file to C:
-type in , fastboot flash boot "C:\boot.img"
-type fastboot reboot
If you are lucky , your device might boot (very slight chance to actually boot)
If it doesnt , no issues , this is where you show your skills as rom porter xD
You wont have access to Android OS , but after dalvik cache has been build , access to adb will be granted.
In the same above mentioned website , there is a tool which can port cwm for any mediatek device.
Download it in your PC , PC should not be windows 10 , Compatibility mode wont work.
Make sure you have Drivers necessary to proceed.
Use the tool and Click automatic porting and follow on screen option to Complete Porting recovery , once the recovery has been ported , reboot into recovery.
Now you will have complete access to adb without any problem.
Once you have a proper working recovery , with adb shell , do the following,
Code:
-adb shell
-df
-cat /proc/partitions
Once you have access to the mount points , you can start DeCompiling kernel and do the necessary changes in fstab
To decompile kernel , there are many tools for Windows and Linux
Google it , if you have any problem , PM me or reply back , I'll be happy to assist you