hi.i try to root my phone .i follow the steps everything its ok bootloader unlock but after fastboot flash boot rootboot.img when i reboot my phone the phone stucks at google and doesn'n open.then i try to flash custom rom from recovery.my pc recognize my phone show the hard disk at my computer but i can't open the hard disc to transfer files.i can transfer files only from sdk.i transfer the update zip to sdcard and from recovery i press install zip from sdcard but cant find the file.i press aply update from sdcard too but cant find file too.after 5-6 tmes i did this i try to flash the rom from sdk programm.it makes something after 2-3 minutes i saw a ramp for 1-2 second at my phone and then a yellow triangle with android down and the phone did not do something it stucks.
tell me please what can i do to work my phone again?thank you
Hello , I have an Huawei Ascend Y500-L01. Recently , I send a email to Huawei company to give me the 16 digits code to unlock my bootloader. Is work fine , i rooted with Supersu and install TWRP recovery. After this things , my mistake was to install gapps for android (5.1.x). That gapps.zip wasn't for my version , i run 4.4.4 kit kat. After this , i turn on the device and is telling me the following "Your ID network was altered , you can not use a network." I press "OK" , and the device restart , and make me 3 colours (blue ,red ) - this in little squares and the background green. Few seconds later , tell me I must download the recovery and update to authorized image, and stuck in my boot-loader (now is locked but unlocked ). I try to sort it out , to insert again the code that Huawei company give it to me , but in fast boot say "command not allowed". I found a program who unlock my bootloader , but that program tell me my bootloader is already unlock. Now i am stuck in fastboot&rescue mode , without any OS or recovery , and bootloader is not working.
How can i repair ?
Please HELP ME ! :crying:
Which country is your phone from?
IF it is western europe, download this (click Scarica subito):
http://consumer.huawei.com/it/support/downloads/detail/index.htm?id=30669
else try to find the firmware for your region.
Then:
Copy the folder "dload" from the zip to a SDcard, and put it in the phone.
Turn on phone while pressing all buttons.
Your phone will be cleanly flashed.
There is also a more detailed instruction in the downloaded file.
I try it already, i have the firewall ,but i can't do nothing. I try many times , i don't have any recovery or system install in my phone.:crying:
Flash your phone using sp flash
I try it already , doesn't work.But thank you for involve , if you give me that sp tools for my phone i will be great. I attached images with what happened with my phone.
Or if you have the scatter file for this model or you know how o be created, or if you can create for me with MTK droid tools if you are kind?
The Y550 does NOT use a MTK Chipset, so Mtkdroidtools and SPflash won't work.
Try again what i wrote, read the instructions in the download file.
Hi all, i want to unblock bootloader for my Che2-L11 and I already get the 16-digit code from huawei website.
Unfortunately I fail in the first step because even the fastboot mode also cannot enter even I tried to use different method to enter the fastboot mode but still failed. .Anyone face this problem before ?
volume down + power button = no vibrate and straight enter system.
volume down + up+power = error message"no UPDATE.APP found".
After done research and I get know the UPDATE.APP is the file inside the dload folder that I was downloaded from hua wei website last few day for upgrade to 5.1.1 lollipop and yet now I copy the whole dload folder to sd card and try again see.
*will update if I can get in the fastmode
okay.........volume up+down+power is just upgrade the phone system and does not enter to fastboot mode.
Hello everyone.
So I decided to update my device as i find out that there is a new default ROM available for my device that is Infocus m530.
I downloaded the ROM and i was flashing it through Software Update Tool (SUT) in Normal mode. The installation process got stuck at 16% for like 10 or 15 minutes so I removed the USB (I know its a dumb move ) . And I rebooted the device and got stuck into a boot loop.
I can access the default 3e recovery mode only but because my ROM was in format ob .nb0 I am not able to Flash it using stock recovery, I can no longer access the FastBoot mode,
When i try to boot the device up it goes into One or two loops and the a windows pop up saying no command. In that window if I press power button the stock recovery shows up.
I tried to flash the ROM again using SUT in emergency mode but the device is getting disconnected automatically. In device manager its showing up as Mediatek Pre Loader USB VCOM for a second or 2 and then automatically getting disconnected and then same No Command menu.
For a minute a new device is also popping in the Explorer which usually contains all the default driver of the phone.
Any way I can recover my Bricked Device
Any help or advice would be much appreciated.
Hi , try to flash this firmware from normal Recovery , once you download rename to update now put firmware inside empty formatted sd card and put inside your phone to start flashing from recovery .
https://www.kriztekblog.com/2016/06...=o67JcQ2b1GjkodlJa9ULilWJwoqb1xZxq6CkVi5D960=
I didn't checked it is for zip or for flash tool so test it first . Good luck .
FIXED
Teddy Lo said:
Hi , try to flash this firmware from normal Recovery , once you download rename to update now put firmware inside empty formatted sd card and put inside your phone to start flashing from recovery .
I didn't checked it is for zip or for flash tool so test it first . Good luck .
Click to expand...
Click to collapse
I already tried it but it didnt work.
So finally I was able to fix the device. The META Mode ain't a myth. Flashed the ROM correctly in META mode and the device booted up properly.
Hello,
I own Huawei Y6 Prime 2018. The model is - ATU-L31.
I downloaded firmware by using firmware finder.
I made a dload folder in SD CARD then I put there the files (with update.app of course), turn on phone by pressing volume down and power button (tried more variations of powering on). The install starts but at 5% it ends with "Software Install Failed" error. I tried like 10 firmwares for ATU-L31 model no ones works.
PS: Cant update with another method - no access to mobile phone because I cant get out of eRecovery mode.
Can you help me please?
Kindest regads
Derka.
Put your update zip on an external SD card try to flash from there or if i were you i would put my phone into fastboot mode and flash using SP Flashtool on my laptop.