Related
Dears,
I have a generic chinese tablet related to my friend, and don't exactly what firmware version was included after its original has been crashed by somehow, i decided to flash it with other firmware...
The problem that i can't find compatible a10 with 8 Inch rom, most of roms are 7inch and 9.7 inch, i have found 2 roms of 8 inch; they seems very great but unfortuantly the touch is not working...
On other hand; the other firmware 7 inch firmwares is working with touch ok but the screen seems sliding up as it is repeated twice on screen.
Can someone guide me what to do, i have flashed those firmwares with livesuit
Thanks
raedhosny said:
Dears,
I have a generic chinese tablet related to my friend, and don't exactly what firmware version was included after its original has been crashed by somehow, i decided to flash it with other firmware...
The problem that i can't find compatible a10 with 8 Inch rom, most of roms are 7inch and 9.7 inch, i have found 2 roms of 8 inch; they seems very great but unfortuantly the touch is not working...
On other hand; the other firmware 7 inch firmwares is working with touch ok but the screen seems sliding up as it is repeated twice on screen.
Can someone guide me what to do, i have flashed those firmwares with livesuit
Thanks
Click to expand...
Click to collapse
Here is a list of Firmwares 7 inch compatible that i have tried:
F1-4.1.1-20130319.2.0.6-A721_V4.2.img
F1HD-4.1.1-20130319.2.0.6-A721_V4.2.img
G9_A4.03_V4.20.02_CHS_1.5V_OCV.img
novo7_v2.0_feiyu_mod.img
pfd_android4.0.10_ctp7_public_en_0319.img ( Touch is working )
Vi30P_Android4.0.3_v0.5.img
And here is a list of 8 inch roms compatible with a10 chipset, however touch is not working at all :
momo8S_4.0_20120115.img
pfd_android4.0.10_ctp7_public_en_0319.img
I have same problem:
Hi, i have a mid tabler model HBD-Mid-708G like that http://marcopolocompany.fucsio.com/e...oducts/MC-708G . This is a Boxchip a10 with 11 partitions, i get this info throw ADB.
My problem was try to install CWM getting the error Can´t Mount / Read!!!!!
I have been used this roms:
F1-4.1.1-20130319.2.0.6-A721_v4.2
pdf_android4.0.10_ctp7_public_en_0319
Q7_512M+flash+Gmail
rom_woo_comet_404_291112_0cd4d
RSH-A10-C2
speed.1.1.1
sun4i_crane_t01a-linsay-20120411
and only rom_woo_comet where some Ok! .
Solved this CWM problem flashing a rom_woo_comet using LiveSuit but the result is an screen resolution problem: (the image attach) .
So please any can say me a correct rom?
Thanks
Hi!
I need a little help here. I have Allwinner a10 tablet with a firmware problem. I have opened it and I searched all the numbers on the board and it gives me a result that my tablet is MOMO 8 Bird,but its not! I have tried alot of firmwares but it only accepts those for LY-F1.
Thanks in advance!
Received my Ulefone U7 yesterday and so far impressed.
Intention is to use in my car to replace the OEM satnav.
To do this, I need to enable the softkeys/navigation bar as the physical buttons will be behind the dash.
I've rooted OK and have so far tried what I thought would work..
qemu.hw.mainkeys=0 in build.prop
Xposed and as many modules as I can find!
Play store apps like softkeys enabler
So far, no soft keys
To enable softkeys on my Samsung Note 10.1 2014 I had to install a custom ROM
Any advice welcome.
Do I need a custom ROM?
Thee Ulefone U7 is the same as other MTK6592 phones I believe, can I use one of those ROMs?
Evans_jd said:
Received my Ulefone U7 yesterday and so far impressed.
Intention is to use in my car to replace the OEM satnav.
To do this, I need to enable the softkeys/navigation bar as the physical buttons will be behind the dash.
I've rooted OK and have so far tried what I thought would work..
qemu.hw.mainkeys=0 in build.prop
Xposed and as many modules as I can find!
Play store apps like softkeys enabler
So far, no soft keys
To enable softkeys on my Samsung Note 10.1 2014 I had to install a custom ROM
Any advice welcome.
Do I need a custom ROM?
Thee Ulefone U7 is the same as other MTK6592 phones I believe, can I use one of those ROMs?
Click to expand...
Click to collapse
Hey bro i want to ask you if you have problems with the camera ? it keep flickering purple ?! for me
I have a Tronsmart PS7 incoming which is the same device as far as I can tell with different branding, I'll see what I can work out for you, I'll be working on a clockwork build for it eventually.
Have you considered rooting it and installing https://play.google.com/store/apps/details?id=com.mrbimc.udn
there is another program https://play.google.com/store/apps/details?id=com.smart.swkey
Button Savior I do not particularly like, because personally I think its ugly, but it is functional as far as I can tell when I have used it on a device with broken buttons, it is not strictly speaking a navbar, but it has home and back etc on it, so it may work without needing the rom to be navbar aware.
There is also a mod for xposed that allows you to complete navbar functions using swipes for example swipe left to right = home, swipe right to left = back, see more here http://forum.xda-developers.com/xposed/modules/app-gesture-navigation-multitouch-t2690180
There is a factory image here http://www.needrom.com/mobile/ulefone-u69u7/ it may be possible to edit that image to include the navbar
DO NOT FLASH IMAGES FOR OTHER PHONES
Yes the SoC is the same, but the button config, screen, camera, usb/otg functions hdmi output are likely to be different and so the driver sets will most likely not match and leave you with either a device with broken features or a device that will not even boot, so be VERY careful with that.
davidcampbell said:
I have a Tronsmart PS7 incoming which is the same device as far as I can tell with different branding, I'll see what I can work out for you, I'll be working on a clockwork build for it eventually.
Have you considered rooting it and installing https://play.google.com/store/apps/details?id=com.mrbimc.udn
there is another program https://play.google.com/store/apps/details?id=com.smart.swkey
Button Savior I do not particularly like, because personally I think its ugly, but it is functional as far as I can tell when I have used it on a device with broken buttons, it is not strictly speaking a navbar, but it has home and back etc on it, so it may work without needing the rom to be navbar aware.
There is also a mod for xposed that allows you to complete navbar functions using swipes for example swipe left to right = home, swipe right to left = back, see more here http://forum.xda-developers.com/xposed/modules/app-gesture-navigation-multitouch-t2690180
There is a factory image here http://www.needrom.com/mobile/ulefone-u69u7/ it may be possible to edit that image to include the navbar
DO NOT FLASH IMAGES FOR OTHER PHONES
Yes the SoC is the same, but the button config, screen, camera, usb/otg functions hdmi output are likely to be different and so the driver sets will most likely not match and leave you with either a device with broken features or a device that will not even boot, so be VERY careful with that.
Click to expand...
Click to collapse
I ended up rooting and installing softkeys
Working great
I can't post external links, but if you checkout you tube video yWdD8Guf0U0 you will see it installed in my car
ulefone u7 phablet kitkat 4.4.2 is available
if you bought the U7 this may 2014, i advise to upgrade the ROM to new upgrade
ulefone said:
if you bought the U7 this may 2014, i advise to upgrade the ROM to new upgrade
Click to expand...
Click to collapse
Hi, i got he tronsmart ps7. Seems all same same to me. Can i use the new ulefone rom? If so, where can i find it and how too upgrade an MTK rom.
Tnx in advance
Regards
Axelman
Sent from my PS7 using XDA Free mobile app
Ulefone u7 firmware
Axelman8 said:
Hi, i got he tronsmart ps7. Seems all same same to me. Can i use the new ulefone rom? If so, where can i find it and how too upgrade an MTK rom.
You device ps7, maybe OEM model,then check your phone's information firstly . setting->about devices->(1.Kernel version:? 2.Build number: ? ) ,or press volum- and power button together to get factory version details. After the information be confirmed, you can download ulefone u7 firmware at ule-fone dot com
Tnx in advance
Regards
sam
Click to expand...
Click to collapse
ulefone said:
if you bought the U7 this may 2014, i advise to upgrade the ROM to new upgrade
Click to expand...
Click to collapse
could we get a link to the KitKat ROM, I can't find it online
hi david,
you can download the ulefone u7 firmare here: http://www.ule-fone.com/downloads/ulefone-7-0-inch/
before upgrade,you have to check the sensor types firstly,to get cameras 100% work..
s view
Hello,
I bought the 'created N7' that is like the ulefone u7/tronsmart ps7/luftco a onex/orientphone mega pro 7 etc..., and is sold by the factory with 4.4.2 installed
I found a bug in this product
The bug is about the bad working of the s-view window.
I link here a video where is possible to see how it should work:
http://youtu.be/lk1P9jziw64
The problem is that with the created N7 it is not possible to answer
to the calls without opening the flip cover:
when the N7 receive a call, the s-view window is not sensitive, so it
is not possible to answer
The sview with cover closed is sensitive only for a few seconds after the cover has ben closed, specifically only before the sview goes in standby (black screen)...after the standby, wakening the phone by a call or simply pressing the power button (without opening the cover) the sview seems not sensitive
These are two videos that shows the problem:
https://www.youtube.com/watch?v=EG6DMPL5ImE&feature=youtube_gdata_player
https://www.youtube.com/watch?v=-By6dqV3xrk&feature=youtube_gdata_player
This should be fixed, because is an important feature that is missing:
the phones like N7 of other brands (like ulefone u7/u69, luftco a-one
x, tronsmart ps7, orientphone mega pro 7) instead have a fully
functional s-view window
I already informed some created online sellers (kent wang, peter
yang... ) about this bug,
they told me that they will contact the engineer... but i have
not answer yet...i think they are not able to solve this problemi...
A seller told me that they send the leather case for free,
Its a gift , so i cannot ask them to fix this problem ��
Can someone help me to fix this problem?
I tried installing firmware of other device (luftco a onex 4.4.2)
But nothing has changed ...(and by the way i found that the luftco firmware
does not fit with my n7...the camera does not work with it)
Any hint?
Any suggestion?
I did some tests i found that actually the sview is sensitive also after the standby, but not enought to feel the touches through the screen...
in the settings there is an option 'increase touch sensitivity to allow the control through sview screen',
seems that this high sensitivity status is not reactivated if the cover is not opened after the phone goes to standby...
How can i fix this problem? perhaps some fix on touch drivers is needed?
Please help me!
Thank you!
ulefone said:
hi david,
you can download the ulefone u7 firmare here: http://www.ule-fone.com/downloads/ulefone-7-0-inch/
before upgrade,you have to check the sensor types firstly,to get cameras 100% work..
Click to expand...
Click to collapse
Thank you very much!
Hello,
why don't you just take a look at the Ulefone U69/U7+ Support Homepage?
I would post a link but i am not allowed :crying:
cya
ulefone said:
Axelman8 said:
Hi, i got he tronsmart ps7. Seems all same same to me. Can i use the new ulefone rom? If so, where can i find it and how too upgrade an MTK rom.
You device ps7, maybe OEM model,then check your phone's information firstly . setting->about devices->(1.Kernel version:? 2.Build number: ? ) ,or press volum- and power button together to get factory version details. After the information be confirmed, you can download ulefone u7 firmware at ule-fone dot com
Tnx in advance
Regards
sam
Click to expand...
Click to collapse
Please check my version can I install u7 ROM . see the attachment. Camera stated as 13 Mp but I could see only 8 mp.
Click to expand...
Click to collapse
Q&A for RK3066 Tab Genio by Oma rocks !
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hey, I am new here. (I apologise for my bad english)
I have an a Xvision 101p11c i wanted to know if is there a kernel for this tablet.
res: 1280*752
rk3066
same wifi chip
screen and touch chips i can find it
please =/
Good time of day. Possible to alter the firmware for the installation of the recovery?
@oma
The latest CM10.1 v. 1.4 include HW accellaration?
Thanks
Thanks OMA!!
You made my day, my two Pipo S2 works like a charm now!
Thanks for your great work!
I also have an Measy stick based on RK3066, is there any firmware for this gadget to?
Regards // Cyberott
Dear sir i need this tablet rom
Dear boss
i need this tablet rom
Ds733-v3.0 2012.10.08
please sahre this rom
i need very very urgtently
thanks you very much
YuanDao N101II
Hello Oma, first of all thanks for your work. I flashed ROM for my Yuandao N101 II tab based ono your work I got from VonDroid - unfortunately the touch screen didn't work. It worked neither with your rom nor with the newes original firmware. As this was described by some other folks there - for some specific sub-model maybe - and as the touchscreen works with an older stock-rom - this seems to be software-related.
Is there any possibility to overcome this issue? The firmware that is working gives me infrequent hangs for no reason and was described as buggy by other users, too.
Thanks a lot in advance for your help
pmp 5780d_duo
HI to all . i am new here ,i have this tablet prestigio 5780d_duo .i wanted to flash other rom then this official s..... can some one plz tell me which rom is best for this tablet,and plz give me link for rom and kernel. ty in advance
HELP :C
Hi Sir Oma good day
im using your CM10.1 for rk30
i have only one bug the brightness i already reflash the boot.img on your page
and flashed the brightness fix via CWM
but the thing is it doesnt work my tab has full brightness and my battery is
too fast to drain can you make a fix for me?
im using oplus 9.76 from philippines
if you need my kernel here it is
Again the unresponsive touch screen
Hi @ all, as specified in my last post there is a difficulty with the touchscreen with a version of omars great fw that has been ported to VonDroid with minour changes. So, to find out if my tablet's touchscreen can work with this fw, I dug a bit deeper and located the touch screen driver.
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
The only documentation I could find so far is that documentation for this device is lousy and chaotic as is supply with drivers... seems to be quite a fair description. Until now, I found no way to locate additional hints about what touch screen might be built in my tab. Neither online nor on the tablet itself.
Anyhow, some questions came to my mind on and on again, as the last fw supporting the touchscreen is a tiny little bit buggy:
Might there be a chance that the specified touch screen works with the fw? If no: Is there a possibility to configure the fw in a way that it will work?
It would be very nice to find out more on that as I don't want to simply do the same procedure as I did last time: spending about two days to install the same old buggy fw in the end. This is definitely not satisfying.
Thanks a lot for any hint - I tested the fw with mouse and keyboard, but that's no way for working long time if you know you've got a touchpad. Nonetheless, it was long enough to get quite surprised what my tablet is capable to do - and willing to do some work for having these capabilities
Meanwhile, I'll dig deeper
[edit] Guess I found some metal - hope, it's silver at least...
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/gt968.c
Goodix driver Version 1.0 .
Is there a possibility to add that to the rom? Woud be great...[/edit]
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
help me with my screen rotation
heres my new sensor reading
- tab vertical, landscape (y=+9.4)
- turn left to portrait (x=+9.7)
- turn right to portrait (x=-9.6)
- tab horizontal screen up (z=+10.0)
when i tilt my tab to +y my screen got reverted to -y same with x axis. ive dscovered that my y axis is portrait not landscape just like phones axis direction
Icoo d90pro
How can i use your firmware on my device ICOO D90PRO ? I would like to get OC kernel compatible on my device and other . . . Thanks !
USB Host Modem
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1. It works flawlesly, but there is one thing that bothers me. With stock 4.2.2 chinese rom I've been using usb modem(HUAWEI) to connect to the internet, which I've been connecting to HOST port.
After flashing OmniRom, the usb modem does not work. It does show up in USB Host Controller app, the storage in stick, works too, but it won't find mobile network. It gives me an error when searching for network.
Is there some setting that I should set or anything else to get it to work?
lazyNeighbour said:
Hello
I'm using OmniRom 4.4.4. v1.3 on my rk3066 PiPo Max M1.
Click to expand...
Click to collapse
Could you post the link of this ROM? I'm very interested.
Petitgibus said:
Could you post the link of this ROM? I'm very interested.
Click to expand...
Click to collapse
Here http://forum.xda-developers.com/showpost.php?p=54300296&postcount=1118
Does anyone has a discolored yellow screen when using AOSP JB 3.4 for RK3066?? If yes is there a solution for this ??
Sent from my WT19i using xda premium
Multiple Tablet Supported or Specific
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
ahtisham200 said:
Sir
This ROM is specific for PIPO tab or I can use it with other RK3066 Tablet ? I have APPTAB And no firmware is available on internet . So Can i Upload your Custom ROM, ?
Click to expand...
Click to collapse
Before flashing anything do a backup from your stock firmware. You can google about how.
Usually changing the kernel.img for the stock of your tablet and flashing the ROM it might work (sometimes wifi, etc. Not). Also is important to know if your kernel is 3.0.8+ or 3.0.36+.
Cheers
I have a problem
Hi Oma! I have an Manta MID702 , but when i install your cm 10.1 on it, it boots, but i cant use the tablet cause there is a message: android.com.phone process has stopped. It reappears every time i close it. What can i do? Thanks in advice
To sum it up once more: I've got a touch screen that works with the original firmware but won't respond on the other roms. Problem: The original firmware is lagging and quite frequently simply coming to a halt.
Loewe_78 said:
input: Goodix Capacitive TouchScreen as
/devices/virtual/input/input3
<<-GTP-INFO->> GTP Driver Version:V1.0<2012/05/01>
<<-GTP-INFO->> GTP chip version:GT81XNI_3R19_000
[edit2] maybe it's rather one of these drivers - at least the build date is the same my machine specifies.
github.com/Ceastel/CeXstel-kernel-msm8x25/blob/master/drivers/input/touchscreen/goodix_tool.c
github.com/crewrktablets/rk30_kernel/blob/master/drivers/input/touchscreen/gt801plus_819_8105_8110_update.c
Click to expand...
Click to collapse
Is there a possibilitäy to built a firmware that has the driver for the digitizer I specified? Would be great. I've got the orignal firmware.
Hello guys.
I bought a Chinese phone it suppose to be ( Lenovo A8) but when i got the phone i found it where totally different on the Lenovo A8. and it come with android 4.2.2 so i tried to upgrade the phone to 4.4.2. and i found a ROM for CUBOT s208 run on my phone with some problems.
* Camera Not working, even there was no icon for camera.
* No wakeup and air gesture in this ROM but i was have them in my Original ROM.
* Notification light keep working all the time.
MY PHONE SPECS are( 1.3 cpu MTK 6582, 5 inch screen qHD, 8 gb ROM).
is there any programming way to make the phone working 100%.
Or can i get the Camera source code/driver from my Original ROM.
Regards and thanks.
Dose any body have the answer ?
Sent from my iPhone using Tapatalk
Camera is not working because you are using ROM designed for some other device. I dont know what type of ROM you flashed, but you can find out about porting Cynagenmod ROM to your device at Cynagenmod's website :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
BTW Jumping from one Android version to another just by flashing the ROM is risky business. If the preloader gets overwritten with mismatched type, you can hard-brick the phone.
sudeshkmr said:
Camera is not working because you are using ROM designed for some other device. I dont know what type of ROM you flashed, but you can find out about porting Cynagenmod ROM to your device at Cynagenmod's website :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
BTW Jumping from one Android version to another just by flashing the ROM is risky business. If the preloader gets overwritten with mismatched type, you can hard-brick the phone.
Click to expand...
Click to collapse
Thanks, i already broke my device and i fixed again. And i don't know what is exactly my device because it is just a Chinese clone.
I am asking a bout a kind of programming way to fix these issues.
Sent from my iPhone using Tapatalk
Hello all,
I recently bought an allcall rio from gearbest and like any smartphone that comes from gearbest it arrived with some bloatware (google admob) which made the phone terribly slow. Because i had some experience flashing roms on my OPO. I tried to flash a ROM that I found on allcall forum (in which they said was updated and didn't contain any bloatware). I followed their tutorial but touch became unresponsive so now I have to use an optical mouse with OTG cable in order to operate the phone. Later I tried to flash again another ROM, an older one that i found on needROM site but somehow ended having to de-solder the battery to flash "official" rom again. After flashing this last ROM, I was able to use the phone (with optical mouse only) and applied the OTA update available hoping that would solve the touch problem, but it didn't.
This is a MT6580A based phone, with android 7.0.
Appreciate any help
I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !
NMPG said:
Hello all,
allcall rio MT6580A based phone, with android 7.0.
Appreciate any help
Click to expand...
Click to collapse
Hi this is for sure firmware problem so try this one to flush but before that Wipe cache partition from recovery .
http://www.mediafire.com/file/cks7q7saekoosc0/AllCall_Rio_MT6580_20170808_7.0.zip
Good luck
---------- Post added at 12:35 PM ---------- Previous post was at 12:32 PM ----------
G_0phy said:
I have similar problem but my LCD is black on my ALLCALL S1 - also after flashing official firmware :/
So i think that for both of us is allcall big NO !
Click to expand...
Click to collapse
Also you can try with another firmware :
http://www.mediafire.com/file/fm6wto42klr4w4d/AllCall_S1_MT6580_20180817_8.1.0.zip
Good Luck
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
I also flashed Teddy Lo ROM with success, but with same result, everything boots fine but still no touch screen... I think I may have messed up the partitions... maybe something persists on some dark corner of phone that doesn't allow to overwrite when flashing new ROMs to get LCD and touch screen drivers...
G_0phy said:
Yeah, that's the one i tried to flash, there aren't any newer versions on internet. I need rom for allcall s1 X <- that X version has newer/different display - uses different drivers, so most likely that's the reason why i have black screen...
Only version on internet : V1.10_20180817 (Don't supports S1 X)
Version i had : V1.3_20180912 (Isn't on the internet, still trying to contact allcall support)
Device name ALLCALL_S1_X (Only in settings-about device, didn't know that it is different than S1, on the box and everywhere else it says S1 without X... )
If there is anybody who could upload that firmware somewhere that would be AWESOME !
Click to expand...
Click to collapse
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck
I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.
nkomarn said:
I am assuming you flashed an incorrect/corrupt version of the ROM and the touch drivers might be different in that version. Try finding another version and see if it fixes it.
Click to expand...
Click to collapse
I flashed almost every allcall rio mt6580 ROMs I could find out there with the same result... Don't know what to do anymore
Teddy Lo said:
Hi dude probably your device use MT6582 chip instead MT6580 so try this firmware for MT6582
https://drive.google.com/file/d/1vxACZ6SSpRi-uSsVVWgqvjF3gGEjGBZj/view
password : https://mega.nz/#!2nZGkZAI!-TrXlG1iU0-g7yZkcZGU0FdR68Gw7nUp-5J2bBcKAqY
Hope this is the right one bacause I didn't find any for S1 x so that X sign I think is for S1 clone version which use MT6582 but I'm not sure ...
Let me updated what you have done ... Good Luck
Click to expand...
Click to collapse
No, it's MT6580, phone works, even touchscreen works (talking about S1 X) but LCD drivers are different...