I've been trying to find a OTG powered hub that doesn't suck for basically ever.
Assuming this works in USB2 mode I might be in love. Something like monoprice should have a USB C to USB2 A cable.
Chromecast ethernet adapter
Hi
I have also tried to find a good solution for a wired Ethernet solution, without any luck.
I tried the Chromecast Ethernet adapter, but without luck.
Following this thread to see if you have any luck with the compute stick hub.
\Sorenjul
Related
I've successfully made an OTG cable. It works fine.
I have also rewrired my monoprice 11pin to 5pin MHL adapter directly to my MHL output with a 40.2Ohm resistor. The phone recognizes it as a smartdock and the MHL/charging is all working. I am running TW rooted...
However when I add the proper connections to another OTG adapter, I don't get any USB enumeration. I can post pics and pinouts if anyone cares..
Monoprice part of the 9-5 adapter is 9716... I can't post links yet.
Anyone have an idea of how or why USB enumeration isn't working? I get power to said USB device, but nothing shows up on the phone side that a USB device is connected or working... I verified the device with the original OTG cable I made, so I know the mouse works just fine there.
SOB
Hi!
It looks like it's possible to use some USB Ethernet adapters with some Android tablets, but is it possible to have it running on AC power at the same time?
I suppose that this can be achieved with some special OTG cable, if it is possible at all. Have anyone been successful with this?
Please share what's your setup, i.e what tablet do you have, what Ethernet adapter works with it, and what kind of OTG cable are you using.
Direct links (Amazon, eBay, etc...) are very welcome for Ethernet adapters and OTG cables.
Thanks in advance!
PS: Hopefully this is the right forum to post these type of questions.
Hi, I tried with a otg cable which had an additional port for power but it's just for when u use hdds who needs more power then 450 mA to run. Android is not allowing to charge the phone during USB otg usage.
Hello all, I'm trying to use a usb-c to rj45 lan adapter to connect directly instead of wireless for XZP but so far the one use (b elkin) does not work or I just don't know how to set it up in Android N. Any suggestion on one that would work would be great. thx:fingers-crossed:
Did you make sure that the adapter u got was compatible with android? I haven't come across one that is
Did you have any joy with getting the adapter to work ?
Regards,
Kevin
I bought another adapter from Amazon - Smays 3 Port 3.0 Hub and USB 3.0 to Gigabit Ethernet Adaptor target Ultrabook, Tablet, IPC, and Motherboard Applications (Realtek RTL8153 Controller, Black), unfortunately it does the same thing. Christmas lights on the LAN but no connectivity. Other post suggest that Sony turn off certain capability that could make USB-C work the way it suppose to for LAN and HDMI. I think I would have gone with the Note 8 if not for the 4K and Tim the Tool Man like for chrome color. Arr ARrrr arr
Is there even any kind of USB-C hub or adapter that works with this phone?
https://github.com/sonyxperiadev/ke...x/arch/arm64/configs/msmcortex-perf_defconfig
Sony hasn't enabled a single ethernet device in the kernel config, of course nothing will work on the stock rom. But hardware wise, as long as you can plug it to the phone everything should work as long as you can get load modules.
EDIT: https://forum.xda-developers.com/t/...eys-implemented.3795510/page-53#post-80071598
hello guys. can i connect a Ethernet LAN to mate 10 pro by USB c to Ethernet adapter?
does it support wire internet?
Yes you can. You need something similar to this :
https://www.amazon.com/gp/product/B00ZZ6NW5E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
numbnutsuk said:
Yes you can. You need something similar to this :
https://www.amazon.com/gp/product/B00ZZ6NW5E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Funny, I have the Anker one, but with a USB-B port. Connected in a USB-C hub, that provides HDMI out, USB-C to charge and USB-B, in which I plugged this. While the lights flicker, nothing works. I tried plugging a USB memory stick, won't read it (my Anker adapter has USB 3.0 and gigabit ethernet). But, if I plug the key directly in the USB-B port of the USB-C hub, no problem. So somehow, that one does not work for me. Anyone else been able to get an adapter to work? At best, I want something like the Dell WD15. It's an overkill, but any alternative providing ethernet, hdmi, usb-b and a mean to charge like usb-c. A mix of video ports is even better, but not required.
Hi guys,
I wonder if it would be possible to connect my 8.4 inch m5 via ethernet. As far as I know there should be support for usb to ethernet cables in Android 6.1 (not sure with the version should be around 6) and higher.
Thanmk you for your time.
As far as I have seen in the forum people tried it with hubs but weren't successful. Same story as the hdmi output :/
Yes you can, I've tried usb Ethernet adapter connected with type-c OTG and the tablet happily connected to the wired network (WiFi off).
That's nice to hear. Thanks
I've tried usb Ethernet adapter connected with adapter USB <-> microUSB <-> typeC, did not work.
WoW!
Now it's working with Total Commander!