Hi all, I need help, I've change my screen LG Stylus and when I went to try the screen without putting the screws it looked good, without any problem. When I put the screws began to darken the color of the screen. I realized that was where the screen is connected to the cell, was interfering not know why, but now the problem is that it does not give any color, the screen now.
help :s
Related
Hello everybody,
Since yesterday my Xda doesn't work anymore. I tried to sync an image to my Xda, and then i got a strange stripe over my screen. I reset the device, and then the screen went blank and faded into blue stripes. When i put it in my docking it gives the noice of synchronizing. But i see nothing ... I already made a back-up and tried to reset it, soft and hard.
I doesn't work, who can help me?
Thanks!
Dennis
looks like a screen connector problem ... have you dropped it or something ?
No... what do then???
there are VERY few virus's out for pocketpc's
even non of them would ever be able to stray there
after a hardreset
i would say that it's a hardware issue
Maybe something with my bios? I can approach my Pocket pc through my computer. The screen goes from white until a white screen with stripes...
What to do?
Hi,
I dropped my Galaxy S2 Yesterday (have no idea if this relates to it) But i plugged it into the charger this morning and everything was blue & some of the screen had turned black and some icons had burnt into the screen it looked like.
After taking it with me because it was still usable, Its not completely black except for maybe the faintest part of blue.
Im running Lite'ning rom, The newest one im pretty sure.
Just wondering if this is a virus? Or the screen is dead. I just cant see how it could suddenly die when it was flat and not turned on.
Phones not under warranty by the way. So maybe you could give me some options?
Thanks heaps guys
Probably the problem is hardware related due to the fall, but you could back all your data and try to do a factory reset to see if it fixes or not. If it doesn't fix maybe you should check your screen hardware.
Thanks for the reply,
I just reflashed Litening with Odin 1.85 and still nothing, I get the vibrations, touch lights, sound ect, But only occasionally a tiny little strip of blue along the top.
How would i check my screen hardware? Because i pulled apart my galaxy s after it died and accidently cracked the screen & Glass
How would i do a factory reset by the way? Since i cant see anything
I'd imagine it's dead. I'd take it to your local store and ask for an estimate on how much it would cost to fix it. If you can't see anything, then the screen is either broken or it got disconnected (or maybe some of the ribbons did at least).
Yeah, I just dont really wanna take the phone apart unless i know its likley to fix it.
When i first got it, I noticed it had black splotches on the screen in very dim light on a white background. Nd im guessing id have to almost buy a whole front screen assembly to replace the front screen D:.
Would i be better just to sell the phone how it is? Or repair it?
Hey guys, so I had dropped my phone and shattered the screen on the top left and there was a crack down the middle. Anyways, I ordered a replacement and replaced it..and low and behold, either I did a bad job or somethings up with the ribbon from the replacement screen. When I turn it on, the screen will display this weird static and I can see the mikmik splash screen (Newts RLS6.0), then it'll go black. I guess once the phone goes into sleep mode I can turn the screen back on with no problems. But, here's my main problem..I can't get into amon ra without the screen completely being messed up. I'm a flashaholic and this is terrible for me. Does anyone know how to fix the problem itself, or is there a way I can flash ROMs through PC? (S-Off). Thank you guys in advance
hi guys
yesterday i bought second-hand s3 device , and i have this problem in screen
if you see the attachment below you will notice shadow icons and they stick all the time .however, there is no problem in screen touching
please help me
You have screen burn, where the phone has been left on for many hundreds of hours and the dock icons have made a permanent mark.
There is no way to cure it.
Hello!
My phone fell from a high place some weeks ago and the screen shattered. Touch was unresponsive, clicking everywehere, but LCD was fine, i could see everything on screen normally.
Ordered a new screen. Changed it, but when I turned it on, only backlight of the LCD was visible, but it was displaying nothing. I thought it was a defective screen (either way, it was, lots of stuck pixels), sent it back and bought another from the same seller. When I changed it and turned it on, again, no video output, lcd would light on but woundn't display nothing on screen. Googled a bit, found out it could be a defective fuse on the motherboard, and that soldering it again would solve. I know nothing about this kind of stuff, so I picked up a tweezers and apllied a little force on every fuse, because I thougth that way I could try to solve it. Well, it worked, kinda. I put the screen above that blue plastic glue only for testing, and it worked, I felt reliefed for seeing sony boot logo again. Figuring out it had worked, i took out the screen, took out the blue plastic, and glued the screen back on. For my surprise, it had the same problem as before, and it doesn't matter what I do now, it wont work anymore, only displays a black backlight with no video.
Could anyone help me out with this? Give me a hint of why it worked once but not anymore. Could it be there's really a defective fuse, or it was just a coincidence that it worked after it had force apllied? Also, the Screen flex is kinda loose, it keeps coming off all the time, and it's really hard to plug it to the LCD sometimes, is it supposed to be like that, or could it be the culprit? Also, touch is working normally, i can't see nothing on screen but i can click and feel it vibrating.
It's kind of a big text, but that's the way I could explain it. Sorry for the bad english, it's not my native language.
And thanks in advance if anyone can help!