Hey Guys!
I used SuperAOSP on my P780 phone, 2 days ago, my phone drained at night 10% (without wifi and mobile data), so i restarted it, then it showed encryption failed reset phone (i never used encryption), so i clicked it, it didnt worked, so i tried to factory reset, it said some cache error, so it didnt worked too, then i tried to flash it with LiFe_v02_for_P780, its the simplest rom for the phone, and it always flashed sucesfully, but now it showed this error message: gyazo.com/27e71b262a134979b6d25a9efd25f972
s_dl_pmt_err_no_space(5069)
I could flash this rom always when my phone was half bricked etc, but at this time i cant flash any of these rom. I think the phone hard bricked himself.
Any suggession? I used the same pc, same drivers, i installed Mediatek drivers, lenovo drivers, used the same method, same USB cable, so i have no idea what is the problem with it.
Please help us! :crying: :crying: :crying: :crying: :crying:
Thanks for the answers!
Pucur said:
Hey Guys!
I used SuperAOSP on my P780 phone, 2 days ago, my phone drained at night 10% (without wifi and mobile data), so i restarted it, then it showed encryption failed reset phone (i never used encryption), so i clicked it, it didnt worked, so i tried to factory reset, it said some cache error, so it didnt worked too, then i tried to flash it with LiFe_v02_for_P780, its the simplest rom for the phone, and it always flashed sucesfully, but now it showed this error message: gyazo.com/27e71b262a134979b6d25a9efd25f972
s_dl_pmt_err_no_space(5069)
I could flash this rom always when my phone was half bricked etc, but at this time i cant flash any of these rom. I think the phone hard bricked himself.
Any suggession? I used the same pc, same drivers, i installed Mediatek drivers, lenovo drivers, used the same method, same USB cable, so i have no idea what is the problem with it.
Please help us! :crying: :crying: :crying: :crying: :crying:
Thanks for the answers!
Click to expand...
Click to collapse
Did you tried to power off the phone for at least 1 minute before flash?
Did you tried to press the red button for at least 20 secconds befire flash?
stympy said:
Did you tried to power off the phone for at least 1 minute before flash?
Did you tried to press the red button for at least 20 secconds befire flash?
Click to expand...
Click to collapse
Yes i tried atm but still the same error
stympy said:
Did you tried to power off the phone for at least 1 minute before flash?
Did you tried to press the red button for at least 20 secconds befire flash?
Click to expand...
Click to collapse
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
Another question: with what sp flash tool did you tried to flash? V5 or v 3 ? To cross from kitkat to jellybean you must use v5. Use only those 2 tools from my post: rooting tutorial for kitkat, from q&a section.
stympy said:
Another question: with what sp flash tool did you tried to flash? V5 or v 3 ? To cross from kitkat to jellybean you must use v5. Use only those 2 tools from my post: rooting tutorial for kitkat, from q&a section.
Click to expand...
Click to collapse
I created a video how i tried to flash the rom https://www.youtube.com/watch?v=FAiW_nqEZTo
I tried v3 and v5 several kind of versions
presented exactly the same problem
:crying: :crying: :crying: :crying: :crying:
SlimDarkness1 said:
presented exactly the same problem
:crying: :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Try to format first !
If you want to install JellyBean over KitKat you must use only V5 of SP Flash Tool.
stympy said:
Try to format first !
If you want to install JellyBean over KitKat you must use only V5 of SP Flash Tool.
Click to expand...
Click to collapse
It gives me
Brom error: s_dl_read_pt_fail ( 5073 )
Thank you for your trouble
:llorando:
SlimDarkness1 said:
It gives me
Brom error: s_dl_read_pt_fail ( 5073 )
Thank you for your trouble
:llorando:
Click to expand...
Click to collapse
What windows do you use?
Windows 7 or XP are recommended.
stympy said:
What windows do you use?
Windows 7 or XP are recommended.
Click to expand...
Click to collapse
windows xp
:risa:
windows xp
stympy said:
What windows do you use?
Windows 7 or XP are recommended.
Click to expand...
Click to collapse
windows xp
:bueno:
SlimDarkness1 said:
windows xp
:bueno:
Click to expand...
Click to collapse
Hi. Sory for the delay.
I am very busy this time of the year.
If you want to do a team viewer session just to see what is going on PM me!
? I have that same problem. You can solve
Mx0xda said:
? I have that same problem. You can solve
Click to expand...
Click to collapse
Can you be more specific?
Related
Rooted P769 V20D.
After flashing CWM using Nandroid Manager I am stuck with the LG logo with "security error" written underneath.
I am able to get into s/w upgrade mode, but adb does not show up in device manager. Tried to reflash KDZ but failed at around 16% (error message showing phone is not connected).
I saw some people with the security error on the P760, but their problem seemed to stem from different issues. I've got fastboot working. I just don't know exactly how to proceed from here. Any ideas?
Nash Deluxe said:
Rooted P769 V20D.
After flashing CWM using Nandroid Manager I am stuck with the LG logo with "security error" written underneath.
I am able to get into s/w upgrade mode, but adb does not show up in device manager. Tried to reflash KDZ but failed at around 16% (error message showing phone is not connected).
I saw some people with the security error on the P760, but their problem seemed to stem from different issues. I've got fastboot working. I just don't know exactly how to proceed from here. Any ideas?
Click to expand...
Click to collapse
Stock recovery
Code:
fastboot flash recovery p4_769.img
update : try now
Lelus said:
Stock recovery
Code:
fastboot flash recovery p4_769.img
Click to expand...
Click to collapse
Thanks Lelus, I'll give it a try.
Edit: Dropbox link is dead.
Edit2: That did the trick. I was really hoping the solution was that simple. Thanks again for this and all the work you've done helping out the L9 community.
Nash Deluxe said:
Thanks Lelus, I'll give it a try.
Edit: Dropbox link is dead.
Edit2: That did the trick. I was really hoping the solution was that simple. Thanks again for this and all the work you've done helping out the L9 community.
Click to expand...
Click to collapse
Nash/Lelus,
I had the same security error after being stupid and flashing CWM with Nandroid Manager. adb does not detect the device in SW upgrade mode for me to reflash KDZ or even try the fastboot option above
Can you guys help me on how you were able to fix recovery image back to stock? Would greatly appreciate it guys. Thanks in advance.
P769 V20D.
Edit: Working now! Thanks to your fastboot script Lelus I was able to flash it with the stock p4_769.img. For a minute there I thought I won't be able to get out of this mess. Thanks to your effort in helping the community. You are a saviour
PS. Is there a safe CWM version that I could flash on my P769 in OTA V20D 4.1.2? I think what happened I used a wrong version. Nandroid Manager showed the CWM version for Android 4.2.2 but I still tried to flash it and that bricked it.
zerologicxxx said:
Nash/Lelus,
I had the same security error after being stupid and flashing CWM with Nandroid Manager. adb does not detect the device in SW upgrade mode for me to reflash KDZ or even try the fastboot option above
Can you guys help me on how you were able to fix recovery image back to stock? Would greatly appreciate it guys. Thanks in advance.
P769 V20D.
Edit: Working now! Thanks to your fastboot script Lelus I was able to flash it with the stock p4_769.img. For a minute there I thought I won't be able to get out of this mess. Thanks to your effort in helping the community. You are a saviour
PS. Is there a safe CWM version that I could flash on my P769 in OTA V20D 4.1.2? I think what happened I used a wrong version. Nandroid Manager showed the CWM version for Android 4.2.2 but I still tried to flash it and that bricked it.
Click to expand...
Click to collapse
you can use 2nd init cwm
Nash Deluxe said:
Thanks Lelus, I'll give it a try.
Edit: Dropbox link is dead.
Edit2: That did the trick. I was really hoping the solution was that simple. Thanks again for this and all the work you've done helping out the L9 community.
Click to expand...
Click to collapse
I have the exactly issue, but my ADB did not appear in device manager any more and I found myself stuck here. The LGMobile Software Tool stull can see my phone, Not the USB-ADB, and the tool says I have the latest version (20F) so I cannot update through the tool. Neither the fastboot, Anyone have other solution?
I tried the "Recovery" in the option of the tool, it stuck in the step 2 (download) forever.
twinwoods said:
I have the exactly issue, but my ADB did not appear in device manager any more and I found myself stuck here. The LGMobile Software Tool stull can see my phone, Not the USB-ADB, and the tool says I have the latest version (20F) so I cannot update through the tool. Neither the fastboot, Anyone have other solution?
I tried the "Recovery" in the option of the tool, it stuck in the step 2 (download) forever.
Click to expand...
Click to collapse
Found a solution!
http://forum.xda-developers.com/showthread.php?t=2050764
the script did give the ADB back! My L9 is back to life. :good:
twinwoods said:
Found a solution!
http://forum.xda-developers.com/showthread.php?t=2050764
the script did give the ADB back! My L9 is back to life. :good:
Click to expand...
Click to collapse
can someone please help me iam stuck i got fast boot and omap but i dont know where to point the recovery image i downloaded i really need help please!
maso321 said:
can someone please help me iam stuck i got fast boot and omap but i dont know where to point the recovery image i downloaded i really need help please!
Click to expand...
Click to collapse
Your phone boot loader is unlocked? If yes, please place recovery.img in fastboot\yours\ folder. If you use Lelus fastboot tool it will redirect you to that folder.
PS. You cannot flash custom recovery if your bootloader is locked.
artit said:
Your phone boot loader is unlocked? If yes, please place recovery.img in fastboot\yours\ folder. If you use Lelus fastboot tool it will redirect you to that folder.
PS. You cannot flash custom recovery if your bootloader is locked.
Click to expand...
Click to collapse
also i thought i had unlocked my loader then i installed pac man rom via clock work and when my phone rebooted i was stuck with the lg security error.. the image i pushed across was a stock img.. i really hope you can help and again
thank you so much i got the image to push across
ECHO is off.
Plug USB cable
wait 4 seconds and put battery back in.
waiting for OMAP44xx device...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
reading ASIC ID
usb_write 4
usb_read 81
[*] read 0 bytes
NumOfSubblocks: 0x5
Subblock ID: 0x1
Subblock Size: 0x5
CH enabled: 0x7
ROM revision: 0x4
Checksum Subblock: 0x15
CHIP: 4430
IDEN: cf020b45827bea3084d9da85d4582be5e62137a8
MPKH: 5f4092eccddf90fa43f546adf89508b31b9c74795e9516194c0ea6412fdcb7f6
CRC0: 9c669ad9
CRC1: 682adccf
sending 2ndstage to target... f0030002
usb_write 4
usb_write 4
wait 5-lelelel...
[*] msg size = 4
usb_write 21552
[*] data size = 21552
usb_close
Reopen usb...
Device descriptor:
bLength = 18
bDescriptorType = 1
bcdUSB = 528
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
bMaxPacketSize0 = 64
idVendor = 451
idProduct = D00F
bcdDevice = 0
iManufacturer = 33
iProduct = 37
iSerialNumber = 0
bNumConfigurations = 1
waiting for 2ndstage response...
usb_read 4
usb read = aabbccdd
accepted 2ndstage response
sending image to target...
size = 246272
usb_write 4
usb_write 246272
** Done **
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\fastboot\yours>fastboot flash recovery p4_769.img
sending 'recovery' (10240 KB)...
OKAY [ 5.253s]
writing 'recovery'...
OKAY [ 1.499s]
finished. total time: 6.753s
C:\fastboot\yours>
then i restarted and still had the same security error .. i then tried to go to the lg support tool and connect via s/w mode it errored out told me to select the upgrade recovery i do that it starts hits 35% then the elapsed time just hangs and the only option i can click on is exit... any ideas ?
---------- Post added at 07:54 AM ---------- Previous post was at 07:49 AM ----------
i also was thinking if maybe you can post the commands maybe it didnt take cause i might need to point it to a partition i am new to fastboot..
maso321 said:
also i thought i had unlocked my loader then i installed pac man rom via clock work and when my phone rebooted i was stuck with the lg security error.. the image i pushed across was a stock img.. i really hope you can help and again
..
Click to expand...
Click to collapse
You did nothing wrong. I've read in some thread that update may seem to stop or hang but it still downloading rom. Please try to wait about 2 hours.
If that don't work, did you try to flash P769 ICS u-boot / x-loader in fastboot? It should allow you to offline flash kdz pass 15% (phone not found error).
artit said:
You did nothing wrong. I've read in some thread that update may seem to stop or hang but it still downloading rom. Please try to wait about 2 hours.
If that don't work, did you try to flash P769 ICS u-boot / x-loader in fastboot? It should allow you to offline flash kdz pass 15% (phone not found error).
Click to expand...
Click to collapse
IT hung for 3 hours and nothing and yes i have it hits 15% freezes drios down 20 10% then back up to 35% and says analyzing phone under progress bar then it say it was halted cause of an error
artit said:
You did nothing wrong. I've read in some thread that update may seem to stop or hang but it still downloading rom. Please try to wait about 2 hours.
If that don't work, did you try to flash P769 ICS u-boot / x-loader in fastboot? It should allow you to offline flash kdz pass 15% (phone not found error).
Click to expand...
Click to collapse
agAIn i cant thank you enough for all your help i was thinking i am almost positive that i didnt have the usb debugging option checked minor step i forgot so i am assuming iam bricked ...
Fix for download mode
maso321 said:
agAIn i cant thank you enough for all your help i was thinking i am almost positive that i didnt have the usb debugging option checked minor step i forgot so i am assuming iam bricked ...[/QUO
you need to get a cable with a 910k micro usb for lg like the p990 with that you can put your phone in download mode i have test it works
Click to expand...
Click to collapse
SMOOTHWIRELESS said:
maso321 said:
agAIn i cant thank you enough for all your help i was thinking i am almost positive that i didnt have the usb debugging option checked minor step i forgot so i am assuming iam bricked ...[/QUO
you need to get a cable with a 910k micro usb for lg like the p990 with that you can put your phone in download mode i have test it works
Click to expand...
Click to collapse
wish i woula talked to you sooner its a good thought to keep in mind i will pass this on too someone i know is bricked at the moment thanks again smooth
Click to expand...
Click to collapse
help
Rooted P768g V20a.
After flashing CWM using Nandroid Manager I am stuck with the LG logo with "security error" written underneath.
I am able to get into s/w upgrade mode, but adb does not show up in device manager. Tried to reflash KDZ but failed at around 16% (error message showing phone is not connected).
I saw some people with the security error on the P760, but their problem seemed to stem from different issues. I've got fastboot working. I just don't know exactly how to proceed from here. Any ideas?
fastboot flash de recuperación p4_768.img ?
auxilio :crying::crying::crying:
Unlock your bootloader first. That would avoid security error.
More problems (new?)
Okay, so I have been playing with my p769 for months now, and I have been able to get rid of the "security error" screen previously. This time, when I go to flash the latest using the LG update tool, it goes from analysis to download to update, but on the update phase it stops at 4%, and won't move for hours.
I tried the fastboot fash, but the command prompt says, "waiting for device" and does nothing. I have no devices appearing in ADB, and I have hit a wall. I had previously installed the p769_20H update, rooted and customized to my liking, so I am speculating that the 20H update or the latest update tool is the cause of the problem. I have been at this for over 12 hours now to no avail. Any help would be greatly appreciated at this point.
I have attached a screen shot of both status screens
this worked for me in getting rid of my security error after trying to flash CWM..
this phone is like fort knox man.. i hate it lol
themitch said:
Okay, so I have been playing with my p769 for months now, and I have been able to get rid of the "security error" screen previously. This time, when I go to flash the latest using the LG update tool, it goes from analysis to download to update, but on the update phase it stops at 4%, and won't move for hours.
I tried the fastboot fash, but the command prompt says, "waiting for device" and does nothing. I have no devices appearing in ADB, and I have hit a wall. I had previously installed the p769_20H update, rooted and customized to my liking, so I am speculating that the 20H update or the latest update tool is the cause of the problem. I have been at this for over 12 hours now to no avail. Any help would be greatly appreciated at this point.
I have attached a screen shot of both status screens
Click to expand...
Click to collapse
i have the same problem with waiting for device, but my phone reboots into the security error screen after about 2 minutes, how can i get fastboot to flash the recovery?????
I am trying to unbrick a mtk 6589 device on spflash tools but i keep coming across a BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069) error, can anyone help with a solution? i would be so grateful.
thanks in adv
plsssssssssssssssssssssss
this shows because your phone has no space left try hard reset
hard reset your android and if it not works tell me what is model and version of your phone
Michael Joseph said:
hard reset your android and if it not works tell me what is model and version of your phone
Click to expand...
Click to collapse
thanks for ur response, here is the thing, the phone cant even come on at all, not even the led light comes on when a charger is plugged or how are u suggesting i perform a hard reset if i cant even go into recovery?
and its a tecno A2 (MTK 6589)
anyone pls helpp?
hello
thablazor said:
anyone pls helpp?
Click to expand...
Click to collapse
just got same situation..my mtk6589 occurs same situation...still cant get any answers....jsut search all entire forum...
mine too. A878 DUO same error when flashing full dump rom
emmc problem 4 sure
I had problem encryption unsucessful screen everytime i reebot and I cannot pass through it the phone kept on that screen even the reset button didn't worked.
So I decided to flash my phone with micromax official stocked image jb 1.11 with sp flash tool.
After the tool proceeded i got stuck at error:
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
help me ASAP please
_frak__ said:
I had problem encryption unsucessful screen everytime i reebot and I cannot pass through it the phone kept on that screen even the reset button didn't worked.
So I decided to flash my phone with micromax official stocked image jb 1.11 with sp flash tool.
After the tool proceeded i got stuck at error:
BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
help me ASAP please
Click to expand...
Click to collapse
From what i see in your picture you should use Firmware Upgrade not Download. If you use Download format first your flash memory.
Waiting for reply...
Sent from my Lenovo P780
i have done that too but no success as i know internal memory is damaged
is there any way if i can make a partition in memory card as internal memory to load ROM
_NODL_PRO_INFO: failed to get PMT info
this is what i am getting while upgrading
Dear -frak- i have the same problem. Any solution if you have been solved these problem?
Thanks
antozz said:
Dear -frak- i have the same problem. Any solution if you have been solved these problem?
Thanks
Click to expand...
Click to collapse
BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069) – BROM Error 5069
BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069) meant that the file which you are trying to flash is larger than the available space or your mobile device partition. Ensure that the file that you are trying to flashing is exact for your model, also try another ROM.
Maybe you are trying to flash 8 GB ROM?
Can someone give me a 4gb rom for mmx a116?
maniche0201 said:
Can someone give me a 4gb rom for mmx a116?
Click to expand...
Click to collapse
Did you tried here : http://forum.xda-developers.com/micromax-a116
Hello !!!
I have problem with my android phone device: MultiPhone PSP5453 DUO
I Have a Stock ROM But i cant flash it.Problem with SPTool.
Every time i flash my phone i get this eror: [EMI] Enable DRAM Failed 4032
My Phone cant turn on.
-------------------
-------------------
What i can To Do?
Phone rooted
swarmachine said:
Hello !!!
I have problem with my android phone device: MultiPhone PSP5453 DUO
I Have a Stock ROM But i cant flash it.Problem with SPTool.
Every time i flash my phone i get this eror: [EMI] Enable DRAM Failed 4032
My Phone cant turn on.
-------------------
-------------------
What i can To Do?
Click to expand...
Click to collapse
U sure your device driver okay??
Jup but still nothing happens - Problem not solved...
i download drivers from here : http://hexamob.com/news/download-android-usb-drivers-for-prestigio/
Dark Knight Begins said:
U sure your device driver okay??
Click to expand...
Click to collapse
Still need help
update : problem not solved.
So I've got this P780 from a friend. He got it for his kid, but the seller tricked him it was in working condition. Turns out the phone is in a bootloop. I've managed to access recovery and found out it has TWRP installed, but that's it. There's absolutely nothing else on the phone. My guess is the seller soft bricked it and couldn't fix it so he got rid of it.
I'm not used to flashing Lenovo phones, I've always had Samsungs and Nexuses, so I was a bit confused at first, but I found a couple of threads here and tried to flash a stock rom using SP Flash Tools, but there was a problem. My laptop couldn't recognize the phone. I found drivers here and installed everything, but I still can't connect the phone on first try. I have to unplug it and then plug it again every time.
I followed these instructions - https://forum.xda-developers.com/le.../rom-lenovo-p780-pre-rooted-official-t2553725 using the sp tools and drivers from the thread, but I've got an error - readback fail (4009)
I'm really stuck right now, I've been browsing the forum for 4 hours and tried everything I found, but nothing seems to work...
I could really use some advice.
topdawg89 said:
I could really use some advice.
Click to expand...
Click to collapse
Hi. Look here in this post. Tell me if this helped you.
https://forum.xda-developers.com/lenovo-p780/help/row-cn-how-to-check-t3333532/page2
Here is one post for + Layout.
From now one all custom firmware is made for this layout.
https://forum.xda-developers.com/lenovo-p780/development/firmware-row-cn-layout-t3550801
This are stock official firmware transformed in + layout.
If you still want normal layout take the stock official firmware from here.
https://forum.xda-developers.com/lenovo-p780/development/p780-row-s226-flash-flashtool-t2909202
stympy said:
Hi. Look here in this post. Tell me if this helped you.
https://forum.xda-developers.com/lenovo-p780/help/row-cn-how-to-check-t3333532/page2
Here is one post for + Layout.
From now one all custom firmware is made for this layout.
https://forum.xda-developers.com/lenovo-p780/development/firmware-row-cn-layout-t3550801
This are stock official firmware transformed in + layout.
If you still want normal layout take the stock official firmware from here.
https://forum.xda-developers.com/lenovo-p780/development/p780-row-s226-flash-flashtool-t2909202
Click to expand...
Click to collapse
first of all, thank you. the drivers provided by you in the first post worked perfectly.
i tried flashing with sp tools v3 and got nowhere, then i swtiched the preloader with the one i found on google drive (it said preloader 2014 or something) and the flash started but after a few seconds i got BROM_ERROR : S_FT_DOWNLOAD_FAIL (4008)
after that i tried the same thing with flash tools v5 and got a different error - BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
edit: i forgot to mention that i did all that following the instructions and using the rom in that same post from the first thread
any ideas as to what went wrong ?
topdawg89 said:
first of all, thank you. the drivers provided by you in the first post worked perfectly.
i tried flashing with sp tools v3 and got nowhere, then i swtiched the preloader with the one i found on google drive (it said preloader 2014 or something) and the flash started but after a few seconds i got BROM_ERROR : S_FT_DOWNLOAD_FAIL (4008)
after that i tried the same thing with flash tools v5 and got a different error - BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
edit: i forgot to mention that i did all that following the instructions and using the rom in that same post from the first thread
any ideas as to what went wrong ?
Click to expand...
Click to collapse
Sooo.... Brom error.
Ok repeat the flash procedure.
But.... When you plug the cable to flash, before insert the cable, press the small red button for 20 seconds and before release plug the cable and release the button. In that order. Finger crossed. ?
stympy said:
Sooo.... Brom error.
Ok repeat the flash procedure.
But.... When you plug the cable to flash, before insert the cable, press the small red button for 20 seconds and before release plug the cable and release the button. In that order. Finger crossed.
Click to expand...
Click to collapse
i think i made a bigger mess... i read somewhere here that i should format using flash tools and i did that just to see what would happen. now i get a "Failed to get PMT info" error ?
did i totally screw it or can i fix this ?
topdawg89 said:
i think i made a bigger mess... i read somewhere here that i should format using flash tools and i did that just to see what would happen. now i get a "Failed to get PMT info" error ?
did i totally screw it or can i fix this ?
Click to expand...
Click to collapse
Try the same procedure with the red button.
stympy said:
Try the same procedure with the red button.
Click to expand...
Click to collapse
i tried and it said there was no partition management table (PMT) and that i should download first.
i tried that and i got another brom error - S_DL_PMT_ERR_NO_SPACE (5069)
topdawg89 said:
i tried and it said there was no partition management table (PMT) and that i should download first.
i tried that and i got another brom error - S_DL_PMT_ERR_NO_SPACE (5069)
Click to expand...
Click to collapse
Ok. Try to do this:
1. Prepare all to flash
2. After that setup SP Flash Tool v.5 to download, not firmware upgrade.
3. Deselect all except preloader.
4. Press download and wait that the preloader to be loaded.
5. After all that is done try to flash again your firmware.
6. Tell me what is going on.
stympy said:
Ok. Try to do this:
1. Prepare all to flash
2. After that setup SP Flash Tool v.5 to download, not firmware upgrade.
3. Deselect all except preloader.
4. Press download and wait that the preloader to be loaded.
5. After all that is done try to flash again your firmware.
6. Tell me what is going on.
Click to expand...
Click to collapse
it loaded. i got the green circle, but when i tried to flash again i've got the same message - "failed to get pmt info"
topdawg89 said:
it loaded. i got the green circle, but when i tried to flash again i've got the same message - "failed to get pmt info"
Click to expand...
Click to collapse
Try this.
1. start sp flash tool v.5
2. go to memory test
3. select ram TEST, NAND test, EMMC test.
4. tell me what it shows.
i selected everything to see what would happen and this is what i've got
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
OK!!
Increment/Decrement Test:
Writing...
OK!!
Click to expand...
Click to collapse
when it got to the emmc test i've got another brom error - S_DA_SDMMC_WRITE_FAILED(3149)
topdawg89 said:
i selected everything to see what would happen and this is what i've got
when it got to the emmc test i've got another brom error - S_DA_SDMMC_WRITE_FAILED(3149)
Click to expand...
Click to collapse
Soo NAND problem.
That is bad.
I want you to try to flash the firmware from this link:
https://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
Try to flash with both sp flash tools.
By the way. You did not tell me what phone it is 4 gb or 8 gb ?
honestly, i have no idea if it's 4 or 8gb and i don't even know if there's a way to check. i think it's the 4gb version, but there's no way to confirm. the owner doesn't know, everything on the original box is in chinese and sadly there's not a single digit that would indicate what version it is. or maybe there is, but i don't know what to look for is there a way to find out ? like something written on the back cover or on the battery ?
topdawg89 said:
honestly, i have no idea if it's 4 or 8gb and i don't even know if there's a way to check. i think it's the 4gb version, but there's no way to confirm. the owner doesn't know, everything on the original box is in chinese and sadly there's not a single digit that would indicate what version it is. or maybe there is, but i don't know what to look for is there a way to find out ? like something written on the back cover or on the battery ?
Click to expand...
Click to collapse
If the phone was buyed from India, for sure is 8Gb. If was buyed from Europa, the phone is 80% 4 Gb.
In this moment you have nothing to lose. Try both.
I'm almost a 100% sure it was bought in Europe, so it's the 4gb version.
I've been trying everything I could think of and nothing seems to work. I still get the PMT info error when I try to flash.
By the way, I forgot to mention earlier - when you told me to download the preloader and then try to flash - the only preloader that worked was the one I downloaded from here https://drive.google.com/drive/fold...l4MXlWT1ctQ3dSUGFVWW4tazdIVlROaVp2aS1DSXk5b2M
I only got the green circle with that one, but whatever firmware I tried to flash with it I got the pmt info error.
topdawg89 said:
I'm almost a 100% sure it was bought in Europe, so it's the 4gb version.
I've been trying everything I could think of and nothing seems to work. I still get the PMT info error when I try to flash.
By the way, I forgot to mention earlier - when you told me to download the preloader and then try to flash - the only preloader that worked was the one I downloaded from here https://drive.google.com/drive/fold...l4MXlWT1ctQ3dSUGFVWW4tazdIVlROaVp2aS1DSXk5b2M
I only got the green circle with that one, but whatever firmware I tried to flash with it I got the pmt info error.
Click to expand...
Click to collapse
Did you tried to flash that firmware?
stympy said:
Did you tried to flash that firmware?
Click to expand...
Click to collapse
yep, multiple times sadly, nothing happened. either i'm doing something wrong or the phone is totally screwed. but it's weird, because it had twrp on it, so the chip was working. maybe if i haven't done the format beforehand and just tried again to flash like you told me it could of worked, but now all i get is the pmt info error and that's it.
topdawg89 said:
yep, multiple times sadly, nothing happened. either i'm doing something wrong or the phone is totally screwed. but it's weird, because it had twrp on it, so the chip was working. maybe if i haven't done the format beforehand and just tried again to flash like you told me it could of worked, but now all i get is the pmt info error and that's it.
Click to expand...
Click to collapse
Yep
Maybe some service store will do the trick....