I am trying to fix a S6 edge. The problem is that when i boot it up it shows me "an error has occurred while updating the device software"
Odin, newest version, does not see the phone. I have searched around and downloaded the G9250ZTU2COKB_G9250ZZT2COKB_BRI firmware for my SM-G9250 and trying to flash it with Odin 3.10.7
It starts but soon after starting it shows me the following error. Any help please? I have searched and found a thread where it says that i need to remove the hidden image from the file but there is no hidden image in it after extracting the tar file.
TIA
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
try flashing the XEU or BTU firmware.
mikey_sk said:
try flashing the XEU or BTU firmware.
Click to expand...
Click to collapse
DON'T do this ^ - your 9250 is a different hardware variant to the 925F/I/T etc models and if you flash a non-9250 firmware you'll likely end up with a paperweight.
Anyone else with any ideas?
Related
Ok so after looking everywhere for a solution and screaming like a mad man in the process i decided to make a thread here and see if someone can help me.
I was running the leaked Android 4.0.3 (got the files from software2tech.com/2012/01/26/complete-guide-update-android-4-0-3-i9100xxlp6-for-samsung-galaxy-s2-video/) and i was running fine. Now i decided to root my phone using software2tech.com/2012/01/27/how-to-root-samsung-galaxy-s2-android-ics-4-0-3-i9100xxlp6/#more-16920
When Odin restarted my Phone all i got was that yellow triangle and i wasn't able to do anything at all but go into download mode (recovery mode is not working) so i thought i could just flash the 4.0.3 Android again and it will all be fine right?....WRONG. Got an error in Odin and after that my phone just said "Firmware Upgrade encountered an error. Please select recovery mode in Kies and try again". Tried it but Kies is not recognizing my phone (neither on the "Firmware upgrade error" screen nor in download mode).
Tried Pistachios Recovery guide but the recovery is not working...i can flash the kernel (which sends me back to the yellow triange) but when i try to flash the recovery files or the bootloader i just get more errors. Also read that flashing a stock kernel could be able to fix a problem like this but how am i supposed to find out what my kernel version is, and choose the right one for my phone if i can't start my phone?
Edit: Ok so here are the errors i get when i try to flash
Recovery files:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bootloader:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS: My Provider is Alice
bump bump bump
tried with stock files....error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried the stock files again with the recovery kernel as pda (yeah probably not a good idea but i'm at the point where i don't really care anymore) got this error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Miigi said:
Ok so after looking everywhere for a solution and screaming like a mad man in the process i decided to make a thread here and see if someone can help me.
I was running the leaked Android 4.0.3 (got the files from software2tech.com/2012/01/26/complete-guide-update-android-4-0-3-i9100xxlp6-for-samsung-galaxy-s2-video/) and i was running fine. Now i decided to root my phone using software2tech.com/2012/01/27/how-to-root-samsung-galaxy-s2-android-ics-4-0-3-i9100xxlp6/#more-16920
When Odin restarted my Phone all i got was that yellow triangle and i wasn't able to do anything at all but go into download mode (recovery mode is not working) so i thought i could just flash the 4.0.3 Android again and it will all be fine right?....WRONG. Got an error in Odin and after that my phone just said "Firmware Upgrade encountered an error. Please select recovery mode in Kies and try again". Tried it but Kies is not recognizing my phone (neither on the "Firmware upgrade error" screen nor in download mode).
Tried Pistachios Recovery guide but the recovery is not working...i can flash the kernel (which sends me back to the yellow triange) but when i try to flash the recovery files or the bootloader i just get more errors. Also read that flashing a stock kernel could be able to fix a problem like this but how am i supposed to find out what my kernel version is, and choose the right one for my phone if i can't start my phone?
Edit: Ok so here are the errors i get when i try to flash
Recovery files:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bootloader:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS: My Provider is Alice
Click to expand...
Click to collapse
my friend
if u don't use software from xda forum, why u make posts here. go to software2tech.com and make posts there. u asked us to give a solution to something we never used and we don't know nothing about.
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Jet5195 said:
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Click to expand...
Click to collapse
I went through this last month and check these things:
- Try a different USB cord
- Try a different USB port
- Disable your antivirus
- May have to reboot your computer
When I softbricked a few weeks ago I went through this process for the first time, and I found I had to keep trying over and over but it finally ended up working.
Remember to unlock your bootloader after this process - which I did not and had to redo everything after rooting and flashing and getting the Verizon discovered unauthorized software etc.
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Jet5195 said:
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Click to expand...
Click to collapse
Did you try looking through the top stickied post about how to recover from a soft brick? I would go there and see if the info helps and post there. I do think it is strange about the product name but there's got to be a fix so keep on...
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Sent from my SGH-M919 using xda app-developers app
Problem fixed
richardlg1 said:
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Sent from my SGH-M919 using xda app-developers app
Problem fixed
Click to expand...
Click to collapse
OMG YES IM HAVING THE SAME ISSUE i was able to get back into the os but i tried to root again and it didnt stick so im back in the soft brick SOMEONE PLEASE HELP
Bump! I would appreciate if someone would help with this issue, as I am also having the same problem.
Odin fails to flash even a stock rom.. please help.
skay301 said:
Bump! I would appreciate if someone would help with this issue, as I am also having the same problem.
Odin fails to flash even a stock rom.. please help.
Click to expand...
Click to collapse
bump. I am having the same issue. stuck in a soft brick with odin unable to successfully load stock or a custom rom. tried different PIT files. tried different roms, tried pushing via adb, tried on windows, osx, and Linux. im seriously gasping as straws here.
odin mode
product name: sgh-m919
current binary: samsung official
system status: custom
knox kernel lock: 0x0
knox warrenty void: 0x1
cso-config-lsb:0x30
write protection enabled:
emmc burst mode enabled
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
toosweetnitemare said:
bump. I am having the same issue. stuck in a soft brick with odin unable to successfully load stock or a custom rom. tried different PIT files. tried different roms, tried pushing via adb, tried on windows, osx, and Linux. im seriously gasping as straws here.
Click to expand...
Click to collapse
You need to create your own thread and describe in detail :
Can you get to Download Mode?
Can you get into Recovery? If so, custom (version>) or stock?
What version of the software / firmware WERE you on?
What did you do to cause it to soft brick?
What versions of the software / firmware have you tried?
Why were you trying different PIT files??
What errors are you having?
es0tericcha0s said:
You need to create your own thread and describe in detail :
Click to expand...
Click to collapse
Thanks in advance for the help!
Can you get to Download Mode?
yes
Can you get into Recovery? If so, custom (version>) or stock?
yes. I just flashed twp on it.
What version of the software / firmware WERE you on?
I was on 4.4.2 from tmobile stock but it was rooted.
What did you do to cause it to soft brick?
I have been getting prompted for an OTA update for a while and kept putting it off. let my wife use my phone and she clicked approve for the update. The phone then rebooted and never booted back up. I originally thought it was a knox issue but after trying a few different recovery methods, all my errors seem to be directed to the PIT. I am currently downloading the Samsung firmware for 4.4.4 from the Samsung website to try sending over to the phone from odin.
Model: SGH-M919
Model name: GALAXY S4
Country: USA (T-Mobile)
PDA: M919UVUFNH7
What versions of the software / firmware have you tried?
4.2.2, 4.4.2, about to try 4.4.4 when it finishes downloading.
Why were you trying different PIT files??
because the current error is "secure check fail: PIT"
What errors are you having?
from which location? odin or the device?
from the device:
secure check fail: PIT
from odin:
big red FAIL in the first box. message output is below.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello everybody. I have a Samsung Galaxy S4 factory unlocked.
A week ago I rooted my phone and changed the firmware to an Android Google Play Edition 4.4 Kitkat. Now, I would like to return to the official stock version. I downloaded the firmware from sammobile and other sources. When I try to flash using Odin, always get a FAIL. This is the ODIN messages history.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505VFGEMK2_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
I tried changing the USB port, uninstalling and instaling Kies, I used different root files, even I used a PIT file, following the steps in this thread (http://forum.xda-developers.com/showthread.php?t=1727443). I already check kies is not running on background. I tried with different Odin version (1.85, 3.04, 3.07 & 3.09)
I dont know how to fix this problem. Please if anyone can help me I really appreciate.
Thank you so much for all your replies.
Guys I flashed my SM-G531H / DL whit this Fiemware (G531HVJU0APC2_G531HZTO0APC1_G531HUBU0APC1)
and now I have this problem,my Phone is brick can you tell me what Firmware can I use to Desbrick my phone?
thx in advance.
It say that After the flash with odin and this Rom
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> SPRDCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
pacoelo said:
Guys I flashed my SM-G531H / DL whit this Fiemware (G531HVJU0APC2_G531HZTO0APC1_G531HUBU0APC1)
and now I have this problem,my Phone is brick can you tell me what Firmware can I use to Desbrick my phone?
thx in advance.
Click to expand...
Click to collapse
Are you sure it is the correct firmware?
You can try this link i created a thread about fail after hidden.img but u can try the something instead of doing steps on hidden.img do for SPRDCP.img. if u dont understand ask me
https://forum.xda-developers.com/grand-prime/help/guide-odin-failed-flashing-stock-t3514810
Becareful
Maybe is baseband G531HUBUAOJ2