Hello guys, I have recently found this out but as I use XInternal SD to switch Internal and External Storages, when i connect my device to PC the MTP Device doesnt show up, The OnePlus Drivers does work however, this has been going on since a long time, but i just thought that it was probably broken drivers, but recently as I formatted and clean installed my Windows (8.1 x64) and installed the OnePlus drivers, but the problem has still persisted. I relized that it was the module when i was clean flashing my Stock ROM, i forgot to copy Xposed & SuperSU zips therefore i connected my device to PC *after booting in Stock Oxygen OS* and sure enough now MTP did work.
Well the obvious solution is to not use the module but I cannot keep all my data in the Internal Storage, i need everything in my SD Card, so can anyone think of a workaround or something for this ?
Thanks
http://forum.xda-developers.com/showthread.php?p=64765463 it probably might solve it but I don't know
Related
I have a nook that had 1.4.1 on it before I put the Nook Zergy root and patch on, about a year ago. The other day I installed cm-7-TEAM-B-BETA1-signed and gapps, and then cm-10-20130123-UNOFFICIAL-acclaim and gapps. Everything seems to be going well except the PC does not see the internal nook sd card (My Nook) or the external SD card. There was also a broken driver in the device manager that said Barnes and Noble Nook, so I reinstalled the Android Composite ABD Interface driver in the device manager, but nothing seems to get the PC to see the nook or sd cards that I put in. The computer drive list shows Removable Disk (E) and Removable Disk (F) and when they are clicked it prompts to insert a disk. My computer is Windows 7. Somewhere along the way I must have done something wrong. It doesn't say My Nook or show the sd card. I have tried reformatting the external SD card.
Is there a way to get the PC to recognize the nook - have it show up on the PC when connected via usb? Will I have to revert back to stock or should I try reflashing the Rom I have, or installing a new Rom? I forgot to make a backup of my 1.4.1 version before I started custom Roms. oops. :silly: :crying:
Are you getting prompt on the tablet notification bar? It should give a message like 'touch to transfer files to computer ' or something like that.
Also try disabling USB debugging mode in settings > developer options
And if you're considering flashing new ROM, go to cm10, no need to revert to stock to fix USB issue.
Edit - missed that you were already on cm10. Usb works fine for me though on cm10
Your Tablet might be set to work as MTP device. Included is a picture of what i looks like in my Windows file explorer. You may need to disconnect and reconnect, close and re-open the file explorer for it to show up.
Thank You satan and asawi - It's working now. Unchecking the developer options and going into the storage options to mount the usb fixed it. I also reformatted the card after I saw that root card would work, but not the one I had in the nook. Everything is working, yay! You saved me from a lot of frustration trying to figure it out.
Hey all, I know this has been asked a ton of times, but I couldn't find an answer for my problem... so maybe someone could help me out.
I'm having issues connecting my SG3 to my PCs.
I've tried with USB debugging on/off, restarting the phone, removing the battery, download mode and recovery mode. On three PCs, Windows 8 and 7.
The odd thing is that it does connect sometimes, maybe for 10 seconds and then I get the windows sound like the device was removed. Sometimes it only connects as charging, sometimes it doesn't even do that.
I'm wondering if the OS could be a problem (I bought it unlocked, looks like they rooted it and installed a custom OS though):
Model number:
GT-19300
Android version:
4.2.2
Baseband:
I9300XXUFME7
Kernel:
3.0.31-702147
[email protected] #1
Build:
JDQ39.I9300XXEFME7
I also have CWN Manager 3.5 (though it gives me an error that it should be used with CF-CWM 1.1 or higher, don't know my version)
SuperSu is also installed.
Is there any way to figure out what ROM was installed?
I tried changing my external SD to mass storage with SGS3 Easy UMS, but that didn't help either.
Also, tomorrow I'm going to see if I can test with a different cable (though I've been using the factory one).
Can I maybe change my OS without PC (I can send files over Airdroid)?
Any ideas?
Don't you have a sd card adapter to use to transfer files to your card from pc? If you do or can transfer files onto the sd card read this thread http://forum.xda-developers.com/showthread.php?t=2002953 install recovery as per instructions in thread...Download a rom put it on your sd card and flash with PhilZ recovery (from the thread)..That was a quick guide!! Before flashing a rom read as much as you can on the subject to make sure you know what you are doing This might not cure your usb problem but it will install another rom if that's what you want
tallman43 said:
Don't you have a sd card adapter to use to transfer files to your card from pc? If you do or can transfer files onto the sd card read this thread http://forum.xda-developers.com/showthread.php?t=2002953 install recovery as per instructions in thread...Download a rom put it on your sd card and flash with PhilZ recovery (from the thread)..That was a quick guide!! Before flashing a rom read as much as you can on the subject to make sure you know what you are doing This might not cure your usb problem but it will install another rom if that's what you want
Click to expand...
Click to collapse
Ah, good idea. Yeah, I have an adapter. I'm going to do some reading before doing anything. Thanks.
Hey, just wanted to follow up that it was simply a bad cable. Odd because it came with the device, but a friend's cable worked right way with these drivers:
http://forum.xda-developers.com/showthread.php?t=2038555
Anyways, thanks for the help.
Hi,
This is my first time rooting my HTC One (T-Mobile) and have managed to unlock my bootloader and install TWRP Recovery. Long story short, while attempting to install the latest Android Revolution HD Custom ROM, I seemed to have wiped my whole phone clean and don't even have an operating system anymore.
How can I get the Custom ROM file from my computer to my phone if I don't even have an operating system to boot into? It would be no problem if this phone had an SD card slot, but it doesn't . The only thing I can boot into now is the TWRP Recovery.
I have tried using the MOUNT option in TWRP Recovery, but to no avail. I have also tried to download HTC Sync Manager and the computer still does not recognize my HTC One. All I need is for my computer to recognize my phone and pop up in Windows Explorer so I can copy it into my phone's internal memory and use TWRP Recovery to install the ROM.
P.S. I am using Windows 8.1 64-bit.
PLEASE HELP ME! :'(
I am in the same situation, i have no operating system and can't access the internal storage.
How do I enable usb debugging?
USB OTG
Hi guys,
I just had this same problem. I formatted internal storage and had no OS at all.
I bought a USB OTG wire from Amazon. I put the ROM I wanted to install on a regular USB Drive and connected it using the USB OTG wire.
http://www.amazon.com/StarTech-com-...e=UTF8&qid=1398213984&sr=8-2&keywords=usb+otg
In TWRP I went to the Mount function and unchecked all boxes except USB OTG. Make sure that's checked. Then, go to install and navigate up folders to the top level folder. Scroll down and the bottom folder will be called USB OTG. Look in there for your ROM.
Install and enjoy!
Now if someone could help me figure out why ADB won't connect: http://forum.xda-developers.com/showthread.php?t=2727881
Hello guys. So I've been recently using my Canvas HD with the Unoffical Cyanogenmod 11 (4.4.4). Here are the issues I face -
1. - My computer does not detect a USB Connection. I mean after connecting the USB the phone charges well enough, but neither the PC detects the phone nor is there an option of USB Mass Storage in the phone. Although I can still Tether internet or enable Debugging. I checked device manager and after connecting the device the mtk preloader comes up for a second and then disappears.
2 - I tried to use the Expand Phone Storage thing on my device for the A116. Now what has happened is that while I did it, SP Flash Tools could not locate my device (this is either due to USB not working or me not having VCOM drivers. And I need to be connected by USB phone to install VCOM Drivers. I use Win 8.1). So, while my internal storage is now 2.46 GB, my Internal SD Card has gone corrupt and no longer shows anything. I can't even start the Gallery now. External SD works just fine.
So these are the issues I face. I'm kind of new to these things so if anyone could help me, I would highly appreciate it. Thankyou.
Flash the ebr files...
If this is not the correct thread, please advise.
Samsung GT-P5113
Rooted successfully
Previous - Android Jellybean 4.2.2
Current - Lineage 6.0.1 - Version 13.0.20170826-NIGHTLY-expressowifi
The Lineage install modified external SD card to be the dedicated internal storage installed platform with OS running on the SD card. I can no longer see the SD card as an external device in USB Windows connection. Basically it is messed up. Unfortunately backup is no longer avail. CWM is now installed.
Please please advise how to correct.
Thanks ahead of time
Steve
I will reply to myself since no one else will
Steve,
Android JellyBean 4.2.2 is gone since your initial backup is corrupted. If you want to re-install that ROM, you can take the gamble on finding it on the internet but the amount of malicious sites falsely stating it is on their site is too high to take gamble. Go find a stable official custom ROM.
You have two options available for using an SD card. Use it as part of the system memory or use it as portable memory. Either way, I have not found a successful way of connecting a usb cable and directly reading\writing to the portable memory. You can remove and place in a memory reader with another device but the USB connection has failed miserably with the custom ROMs. ADB is supposedly an option but I did not get it to work via USB cable.
Your on your own here.
Good Fortune
Your buddy
Steve