[Not sure if I am in the right spot in XDA. I am still trying to learn how to navigate the forms: p ]
I have a blank IMEI. I was running CM 12.1 and then I went back to the stock ROM thinking that would work. I tried to get into the service mode via the keypad but it's blank. I do not have the proper cables to connect my phone to my PC.
Model Number SAMSUNG-SGH-I747
Android Version 4.1.1
Baseband Version Unknown
Kernel Version 3.0.31-274808 [email protected] #1 SMP PREEMPT Thu Nov 15 16:12:42:KST 2012
Build Number JRO03L.I747UCDLK3
Related
So I inherited this wonderful phone not knowing anything about it. Basically I wanted to put ICS on it but I can't...
- Computers do not detect it via USB when plugged in now (it did before). It does charge perfectly though so it's not a connection issue
- Can connect to KIES via Wi-Fi
- Download mode gets stuck. It just says Downloading... and stays there
The phone was originally Bell Canada but it's unlocked and works with my Rogers SIM.
It's currently running Android Version 2.3.3 on Baseband I9100MUGKG2
Kernel Version 2.6.35.7-I9100MUGKG2-CL371789 [email protected] #2
Build Number GINGERBREAD.UGKG2
*#1234*
PDA: I9100MUGKG2
PHONE: I91000MUGK2
CSC: I9100MBMCKG2
BUILD INFO: TUE JUL 12 10:19:43 KST 2011
The phone actually runs fine and all the regular cellular services work just fine. I just can update it to ICS or connect it to a computer USB (to transfer files etc. or do whatever).
What can I do to correct this? Or is this thing stuck on this OS version and the way it is forever?
Thanks in advance
I'd like to add that in upload mode the custom binary count is set to 1. I think whoever unlocked it before did a doozy on it
Hello guys i have a big problem i deleted the efs backup folder and now i am on 4.0.4 stock nordic and i have a wrong imei,i am making all wipes and after that the phone begins normaly but when it's open it doesn't show the tutorial when you begin your android for first time after restore,my sim card doesn't works no pin asked and everything that has to do with the sim doesn't work,the power button when you press it more than 1 sec. the phone turns off(no boot menu shown)and the lock screen doesn't works,the phone as a tablet works fine but not as a cell phone,
Phone information
Baseband version I9100XXLQ6
Kernel version 3.0.15-1068762
[email protected]#3
snp preempt wed Aug 29 13:40:41 KST 2012
Build number
IMM76D.XWLPX
IMEI(WRONG) 004999010640000
Sory for my English if anyone can help because i don't know what to do Thanks!!!
Everything ok i dialed *#87976633#
poison21 said:
Hello guys i have a big problem i deleted the efs backup folder and now i am on 4.0.4 stock nordic and i have a wrong imei,i am making all wipes and after that the phone begins normaly but when it's open it doesn't show the tutorial when you begin your android for first time after restore,my sim card doesn't works no pin asked and everything that has to do with the sim doesn't work,the power button when you press it more than 1 sec. the phone turns off(no boot menu shown)and the lock screen doesn't works,the phone as a tablet works fine but not as a cell phone,
Phone information
Baseband version I9100XXLQ6
Kernel version 3.0.15-1068762
[email protected]#3
snp preempt wed Aug 29 13:40:41 KST 2012
Build number
IMM76D.XWLPX
IMEI(WRONG) 004999010640000
Sory for my English if anyone can help because i don't know what to do Thanks!!!
Everything ok i dialed *#87976633#
Click to expand...
Click to collapse
so the kernel says to me, you arent rooted or are you ?
did you try a firmware from sammobile ?
get a firmware from sammobile and connect your phone via usb and go to download mode
flash it via Odin3 v3.04, drop the one file to PDA
I am rooted and the firmware i am using is 4.0.4 nordic.
send from space using Tapatalk
Hi there
Hopefully someone can help me I broke the screen on my Samsung galaxy SIII i9300.
I ordered a new screen off ebay it arrived I installed it, everything worked accept the center button so I opened the phone back up and adjusted the tabs up a bit to make the connection re assembled the phone to find the middle button worked but I now had no baseband or IMEI number .
The process I have tried so far is:
Factory reset
Tried new logical board (actually tried 3 different boards)
cleaned all connectors
But still no IMEI or Baseband and doesn't recognised sim
ABOUT DEVICE READS
Model Number
GT-I9300
Android version
4.1.2
Baseband
Unknown
Kernel version
3.0.31-1287119
[email protected] #1
SMP PREEMPT fri Jun 28 00:40:06 KST
2013
Build Number
JZO54K.I9300XXEMF6
Network
Unknown
Signal strength
0 dBm 99 asu
Mobile network type
unknown
Service status
out of service
Moble network state
disconnected
ERI version
not available
IMEI
Unknown
IMEI SV
unknown
Device status
Normal
sorry for the long post but if anyone has any ideas I would be most appreciative
Regards
Shannon
Shannon_NZ said:
Hi there
Hopefully someone can help me I broke the screen on my Samsung galaxy SIII i9300.
I ordered a new screen off ebay it arrived I installed it, everything worked accept the center button so I opened the phone back up and adjusted the tabs up a bit to make the connection re assembled the phone to find the middle button worked but I now had no baseband or IMEI number .
The process I have tried so far is:
Factory reset
Tried new logical board (actually tried 3 different boards)
cleaned all connectors
But still no IMEI or Baseband and doesn't recognised sim
ABOUT DEVICE READS
Model Number
GT-I9300
Android version
4.1.2
Baseband
Unknown
Kernel version
3.0.31-1287119
[email protected] #1
SMP PREEMPT fri Jun 28 00:40:06 KST
2013
Build Number
JZO54K.I9300XXEMF6
Network
Unknown
Signal strength
0 dBm 99 asu
Mobile network type
unknown
Service status
out of service
Moble network state
disconnected
ERI version
not available
IMEI
Unknown
IMEI SV
unknown
Device status
Normal
sorry for the long post but if anyone has any ideas I would be most appreciative
Regards
Shannon
Click to expand...
Click to collapse
try restore efs backup and maybe change sim reader?
nduresee saw
naathaanb96 said:
try restore efs backup and maybe change sim reader?
Click to expand...
Click to collapse
I don't have an EFS backup if I get it working im going to get one haha
Dids your baseband and imei disappear as a result of you repairing the screen ? Have you tried to flash a stock rom via odin?
Hi,
I purchased a MT6575 S4 Clone from abroad.
I noticed that with supplied IMEI number restricted access changed message would appear and there would be no connection to my UK mobile network.
Afters pending numerous hours researching and failed attempts to change to change from GSM to WCDMA only - even using apps such as mobileuncle etc.
I changed the IMEI number to another S4 clone I purchased and this appeared to have temporarily resolved the problem.
It connected to my UK mobile network and the phones voice calls etc worked.
However 24 hours later I noticed that every 3 minutes or so it would revert back to restricted access changed message and no network and then back again to the mobile network.
I don't want to have to keep entering new IMEI numbers every 24 hours or so for the mobile to work.
Although I noticed the other S4 clone appears to do something with auto generates new IMEI numbers by itself.
Can someone help me resolve this with a permanent fix please?
I would be willing to install a new firmware etc if basic instructions are provided which include backing up?
Ideally keeping the workable S4 theme and features.
I did briefly try MTKdroidTools and backing up did not appear to work on there.
Hardware : MT6575 (SAMSUNG is Fake!)
Model : Galaxy-S4
Build number : ALPS.ICS2.MP.V1.20
Build date UTC : 20130810-063931
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/21 10:39
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #5 Wed Aug 28 17:04:36 CST 2013
Thanks in advance
Hi
Its been 5 years that i have not used my Samsung galaxy s3, because i did some rooting thing and i was broke . Now after 5 years i have found my Galaxy s3 under a drawer and i seriously want to use it again.
Info i have -- 1) Model number - GT-I9300
2) Andriod Verson - 4.1.1
3) Baseband Version - Unknown
4) build Number - JRO03C.I9300XXDLH6
5) Kernel Version - 3.0.31-61691
[email protected] #1
SMP PREEMPT Tue Aug 21 00:06:17 KST 2012
6) IMEI- Null/ Null
7) ServiceMode - Empty (blank Screen with servicemode written on the top)
I have read few posts from here and there and tried doing the servicemode thing but i was unable to do any thing as my servicemode screen was blank.
when i type *7465625*638*# It prompts me to "personalization" screen where it says " Network Lock MCC/MNC [Space to write] and Control Key [space to write]"
If some one can help that would be so great. I think i did a poor job in explaining. Please ask me what ever is required and ill get onto it.. But trust me i read most of the threads and was unable to understand what to do.
I did a factory reset to get that "servicemode" screen to work but it did not work
You're in the wrong forum This one is about the Tab S3, tablet and not phone... You're looking for this one:
https://forum.xda-developers.com/galaxy-s3
Good luck