i want my xolo x1000 to auto boot when charger is connected - Android Q&A, Help & Troubleshooting

my xolo x1000 has broken power button i want it to reboot automatically when charger is connected

Related

[Q] ampe A10 power problems

i have ampe A10 tablet .. 4.0.4 firmware ,,after i root with ROOT WITH RESTORE BY BIN4RY ..My device cannot charge even i plug the power adapter or usb via pc..and now even i enter the recovery also will reboot again because the power matter..help me!!!:crying:

[Q] Micromax A92 Canvas Lite Keeps on connecting And Disconnecting with USB

Mine micromax A92 Canvas Lite is not rebooting and is stuck on the boot animation of canvas.
I have tried to recover it by pressing volume up + volume down + power button but to no use.So i read somewhere to flash cwm recovery onto it.So for doing so i connected it to my pc and installed the driver.But whenever i connect it via usb it disconnects automatically and shows device is not connected.
Please Help!!!!!!!
Cannot figure out even a single answer on the internet.
PLEASE SOLVE IT!!!!!

Unbrick Bricked ASUS Zenfone 5 (A501CG T00J Kitkat 4.4.2)

When i go to Bootloader (Hold Physical Power + Vol Up) this will show up an Empty Battery Logo
When i go to Recovery (Hold Physical Power + Vol Down) NOTHING will show up on the screen not even a vibrate from the phone
When i just turn on ASUS Zenfone 5 it will show the White USB Logo then it will Bootloop
When i plug ASUS Zenfone 5 to Wall Power Outlet for charging it LED Indicator will not light up
When you turn on ASUS Zenfone 5 while its plugged to the PC the USB Logo is stucked on the screen and it toggles from White to Red Colored Buffer by itself sometimes
When i plug it to my PC while its powered on "Cloverview" will be recognized by my PC's devmgmt.msc but phone screen will shut on and off by itself and "Cloverview" from devmgmt.msc will appear and dissapear the same time that the screen goes on and off
When i plug it to my PC while having an Empty Battery Logo (Bootloader) "Cloverview" will not show up from devmgmt.msc
I need help Badly Please help me :crying: :crying: :crying: :crying: :crying:
jinconstantine said:
When i go to Bootloader (Hold Physical Power + Vol Up) this will show up an Empty Battery Logo
When i go to Recovery (Hold Physical Power + Vol Down) NOTHING will show up on the screen not even a vibrate from the phone
When i just turn on ASUS Zenfone 5 it will show the White USB Logo then it will Bootloop
When i plug ASUS Zenfone 5 to Wall Power Outlet for charging it LED Indicator will not light up
When you turn on ASUS Zenfone 5 while its plugged to the PC the USB Logo is stucked on the screen and it toggles from White to Red Colored Buffer by itself sometimes
When i plug it to my PC while its powered on "Cloverview" will be recognized by my PC's devmgmt.msc but phone screen will shut on and off by itself and "Cloverview" from devmgmt.msc will appear and dissapear the same time that the screen goes on and off
When i plug it to my PC while having an Empty Battery Logo (Bootloader) "Cloverview" will not show up from devmgmt.msc
I need help Badly Please help me :crying: :crying: :crying: :crying: :crying:
Click to expand...
Click to collapse
Sounds like you've bricked it good. RMA it and ASUS should take care of it.
same problem here.
it happens when i tried to downgrade firmware using this guide.
http://www.asus-zenfone.com/2014/09/how-to-downgrade-from-442-kitkat-to-43-Jellybean-Zenfone.html
but i successfully downgraded it. and my phone can boot on home screen only when connected to a charger but it doesn't charging at all..
my only problem is when i try to press power and volume up. an empty battery appears with a question mark at the middle.
and my phone doesn't charge anymore.
did you try to flash stock firmare using adb?
hi there! just want to ask if zenfone 5 wont turn on, not charging, and it is not detected by pc with necessary drivers for the phone installed mean "unrepairable"?

mediapad x1 stopped

i have mediapad x1 .when try to install kitkat 4.4.2 from cwm recovery after restart tablet not power on.
when try to power on it , just turn on led fro 10 second and power off led.(led trun on as red and green)
recovery and fastboot not accessible from pc.just show as unknown device with China name in device manager.
vol up + power and other ways not work.
please help me.

Fire Tablet HD 10 does't start after downgrade

Hi, I have downgraded my Kindle Fire HD 10 (2017) FireOS 5.6.4 to Fire OS 5.3.6.8 and after downgrade it does't turn on. Recovery mode does't turn on either, as if tablet is dead, but when i use USB cable to connect tablet with PC, it recognizes (sound for device plug in and after 2 sec. sound for device plug out) and what can I do? Can someone help me? (((
P.S. I tried click volume down and power buttons together + volume up and power... but nothing.... tried charge device but led does't work and device does't start

Categories

Resources