Related
Where can I get stock firmware for the at&t Tablet P? I might have bricked my device after trying to use the flasher
I also need one original rom 3.2.1 r4a pleazzz
Greenarcher707 said:
Where can I get stock firmware for the at&t Tablet P? I might have bricked my device after trying to use the flasher
Click to expand...
Click to collapse
My signature links
stifilz said:
My signature links
Click to expand...
Click to collapse
your links not have 3.2.1 OS Sony TABLET P AT&T(SGPT211US/S),it only have 3.2 hixhix.
wanmap said:
your links not have 3.2.1 OS Sony TABLET P AT&T(SGPT211US/S),it only have 3.2 hixhix.
Click to expand...
Click to collapse
signed-nbx02_001-ota-0045.010.zip is the one you need. Not online that I can find btw
stifilz said:
signed-nbx02_001-ota-0045.010.zip is the one you need. Not online that I can find btw
Click to expand...
Click to collapse
I was looking for and did not see anything (
alo_tongdaiday said:
I was looking for and did not see anything (
Click to expand...
Click to collapse
Will have to hope that someone has it and can upload it.... I have been looking for a long time
Now, we look 1 machines at&t then back full backup to up is not feasible?
to P users - most cases (99%) of bricks can be fixed.
I will prepare guide how to fix P tab after failure flash.
Today or tomorrow I think I will have some time.
Just wait
br
condi
condi said:
to P users - most cases (99%) of bricks can be fixed.
I will prepare guide how to fix P tab after failure flash.
Today or tomorrow I think I will have some time.
Just wait
br
condi
Click to expand...
Click to collapse
I hope you soon have guidelines
my phone
http://forum.xda-developers.com/showthread.php?t=2131779
Hi,
I've got fix for P users who updated from 3.2 fw without hidden (kernel etc.),
and used FLASHER.
Download:
_hack_recovery.zip
custom_prerooted_R1A-nbx02_002.zip
How-To:
1. Put that two files on SD.
2. Run AiO - choose 'Custom ROM and Flashing', and 'Flash signed zip [straight from recovery]'.
3. Be sure to have installed correctly adb driver in recovery mode.
4. Follow AiO instructions and flash fw.
5. After successfull fix, you can switch to R5A - just reflash via FLASHER like before,
now it will work for sure
Post results.
br
condi
cann't update mtp driver for win 7 (
@condi : please guide me how to install the driver, I did refer to the way but failed
condi said:
Hi,
I've got fix for P users who updated from 3.2 fw without hidden (kernel etc.),
and used FLASHER.
Download:
_hack_recovery.zip
custom_prerooted_R1A-nbx02_002.zip
How-To:
1. Put that two files on SD.
2. Run AiO - choose 'Custom ROM and Flashing', and 'Flash signed zip [straight from recovery]'.
3. Be sure to have installed correctly adb driver in recovery mode.
4. Follow AiO instructions and flash fw.
5. After successfull fix, you can switch to R5A - just reflash via FLASHER like before,
now it will work for sure
Post results.
br
condi
Click to expand...
Click to collapse
file download is corrupt,when i extract ,it erro.
wanmap said:
file download is corrupt,when i extract ,it erro.
Click to expand...
Click to collapse
its not supposed to be extracted . .
wanmap said:
file download is corrupt,when i extract ,it erro.
Click to expand...
Click to collapse
You say corrupt.... We know ENCRYPTED
AIO instruction said to enable usb debugged but I can't enable it since my tablet is bricked. I can only go to recovery mode using vol + and power combo. And when I tried to run hack recovery from recovery it gives me "Prohibit update as a result of checking version or base sku". Please help!!
phoangkhoae said:
AIO instruction said to enable usb debugged but I can't enable it since my tablet is bricked. I can only go to recovery mode using vol + and power combo. And when I tried to run hack recovery from recovery it gives me "Prohibit update as a result of checking version or base sku". Please help!!
Click to expand...
Click to collapse
Use _hack_recovery, then wait 1-2min, and copy recovery.log from device via adb,
and post it here. We need to see your SKU/incremental values, and what exactly error you have.
br
condi
condi said:
Use _hack_recovery, then wait 1-2min, and copy recovery.log from device via adb,
and post it here. We need to see your SKU/incremental values, and what exactly error you have.
br
condi
Click to expand...
Click to collapse
cann't update mtp driver for win 7
please guide me how to install the driver, I did refer to the way but failed
ps : my tab orror http://forum.xda-developers.com/showthread.php?t=2131779
How can I fix without the rom ship ( sony tablet p at&t )??
condi said:
Use _hack_recovery, then wait 1-2min, and copy recovery.log from device via adb,
and post it here. We need to see your SKU/incremental values, and what exactly error you have.
br
condi
Click to expand...
Click to collapse
how do I get the recovery.log via adb?
phoangkhoae said:
how do I get the recovery.log via adb?
Click to expand...
Click to collapse
Adb pull /tmp/recovery.log
hello to all...i am new to this developing. i have a rom file in .zip format....inside it there is system folder. i want to convert this .zip into a system img file. is it possible?? actually i hav a phone on which sdcard is not getting detected. so cwm recovery wont work, niether adb is detecting that device, so i want to make a system img file from this rom so that i can flash it using fastboot. Plz help me
niranjand147 said:
hello to all...i am new to this developing. i have a rom file in .zip format....inside it there is system folder. i want to convert this .zip into a system img file. is it possible?? actually i hav a phone on which sdcard is not getting detected. so cwm recovery wont work, niether adb is detecting that device, so i want to make a system img file from this rom so that i can flash it using fastboot. Plz help me
Click to expand...
Click to collapse
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
bill.weckel said:
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
Click to expand...
Click to collapse
i am trying it for huawei u8180
shinobisoft said:
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
Click to expand...
Click to collapse
I tried this using Livesuit 1.11 for a softwinerEvb a13 tablet (no other known device specs) and it said the image file was invalid. Situation is I soft bricked my tablet by flashing the wrong cwm zip. Finally found out how to connect via Livesuit (kinda like fastboot or bootloader mode or something? like Odin?) to flash stuff to it. I decided to use an erase img .img because where I found how to connect it suggested that to the OP (on techknow). So now instead of the tablet just being stuck on the first screen when trying to boot (normal or recovery), it doesn't do anything at all since there's no boot.img. Which I'm not worried about since It connects to my laptop just fine via livesuit still so I can get a boot on it (ADB won't detect it - pretty positive it's not ADB user error [I run cmd "adb root" when the tablet is connect in whatever mode its in - the way livesuit detects it - and adb says no device found]. BUT I can't find a stock firmware/rom/boot.img for it anywhere (mainly since there's a bunch of clones of this tablet). I'm downloading a few roms (in boot.img format? - .7z files) that I found for "this" tablet (meaning the devs don't know which clones which roms work on lol).
ANYWAY haha, my question is, is there a way to do what you said in the above quote that will work in my situation? I'm not advanced enough to know why livesuit says the image is invalid. I tried it with a cm10.1 zip made for this tablet and a cwm zip made for this tablet (for both I extracted the files and then tried flashing the boot.img I found in the directory(extracted folder right?) via livesuit. livesuit said image file invalid for both .img's.
Please help me and THANK YOU in advance.
I'm open to anyone's help and any help is much appreciated! Thanks buttons will be pressed!!!
Same situation
Same Situation but I know the Specs,, It is allwinner A10 .and Stuck in the soft brick
could you solved this problem? i need a help too, the same problem
---------- Post added at 09:21 PM ---------- Previous post was at 09:13 PM ----------
vennkis said:
Same Situation but I know the Specs,, It is allwinner A10 .and Stuck in the soft brick
Click to expand...
Click to collapse
Hi, could you solved that?
i have a Chinese tablet a10, i have repaired different tablets and android phone trough ADB, but this devices is not detected, i have download some software to help me download the tablet drivers, but hasn't possible that.
finally the only source i have, is charge the firmware again, i use phoenix , and i have some rooms in zip format, what can i do for convert to IMG format?
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
how to convert?
m.morcielago said:
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
Click to expand...
Click to collapse
m.morcielago said:
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
Click to expand...
Click to collapse
hahaha...no answer....i am still waiting for this software
doelwit.sunny said:
hahaha...no answer....i am still waiting for this software
Click to expand...
Click to collapse
You know just converting is not enough
I can convert it
But you need "partition table" for making .IMG
So we don't have it
check sdat2img and imgpatchtools
Hi all, i made a terrible mistake and installed cyanogen 10 for nexus 7 on my protab2xxl tablet.
Is there any way to save my tablet?
Cant use touchscreen so im using mouse/keyboard, but i tried 100 ways to fix it and cant do it.
Recovery mode always goes to Android 3e and not CWM, so im getting "signature verification failed" error
and i cant install the correct cyanogen mod.
Also tried with nexus tool without any luck.
If anybody can help, it would be much appreciated. I will PayPal $10 if somebody helps me to fix this tablet.
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
yash.pranjale86 said:
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
Click to expand...
Click to collapse
i have no idea how to do steps 2 and 3
do i need now drivers for nexus 7 or protab2xxl?
how to install them? i tried with live suite but its not recognizing the tablet.
how to boot into download mode?
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
yash.pranjale86 said:
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
I downloaded the drivers, but there is no exe files:
i50.tinypic.com/bi0zvd.png
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
yash.pranjale86 said:
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
Click to expand...
Click to collapse
I use Windows 7 64
I downloaded the lates firmware: 10 inch TAB-PROTAB2XXL(4.1)-Android 4.0-20120409.zip
Inside there are 3 folders: LiveSuite, 10 inch TAB-PROTAB2XXL(4.1)20120409, UsbDriver
In UsbDriver there are 7 files and non of them is .exe:
usbdrv.inf
usbdrv.sys
usbdrv_AMD64.sys
usbdrv_IA64.sys
usbdrvi64.cat
usbdrvx64.cat
usbdrvx86.cat
I also tried to install with "Device Manager", but when i click on UsbDriver it gives me empty folder.
Sorry i cant post image links. I dont have 10 posts yet.
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
yash.pranjale86 said:
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
Click to expand...
Click to collapse
I think im going to break the fking thing. Im on the edge of my nerves.
I manage to reset it to its original android 4.03 and touchscreen is working now, but
still getting the same "signature verification failed" error when in recovery mode 3e.
Also, tablet is not recognized by ROM Manager CWM, so booting to that recovery and
toggle between signature verification option is not an option.
I think there is no "download mode" on this tablet.
Anything else that you suggest? Im running out of options and the tablet already
received couple of punches. Not sure how long is going to last.
i guess download mode is the recovery mode? When android is on his back?
Anybody got any advice?
SuperOneClick says that my tablet is rooted, but SuperUser cant gain root access. Also i installed Titanium Backup and its same, cant gain access to the root.
What else can i try? Is this tablet lost?
Did u tried to install the USB drivers from the method given in PDF file
Use z4root to root ur tablet.
Thank You Yash for all your help. Finally managed to install Cyanogenmod.
So wow ur done ......
Sent from my A60 using xda app-developers app
Hey please can someone give me a link to the newest twrp wit scatter file for flashing? I've been on the official site and for it but there was no scatter file... Seems impossible to find, thanks anyone who can help =)
Pikachu666 said:
Hey please can someone give me a link to the newest twrp wit scatter file for flashing? I've been on the official site and for it but there was no scatter file... Seems impossible to find, thanks anyone who can help =)
Click to expand...
Click to collapse
scatter file is the one included in every stock rom that is flashable to sp flash tools, when you load the scatter file, it loads a list of partitions and it allows you to flash files onto those partition, in thus case you needed the partition table to flash the recovery, so you need to load the scatter file that is found on any stock rom made for flash tools
haidar123 said:
scatter file is the one included in every stock rom that is flashable to sp flash tools, when you load the scatter file, it loads a list of partitions and it allows you to flash files onto those partition, in thus case you needed the partition table to flash the recovery, so you need to load the scatter file that is found on any stock rom made for flash tools
Click to expand...
Click to collapse
Sorry I don't get it, well do you have link for the zip file for that then?
Pikachu666 said:
Sorry I don't get it, well do you have link for the zip file for that then?
Click to expand...
Click to collapse
twrp can be found here: https://twrp.me/devices/elephonep9000.html
for the scatter file you need to download the rom you are currently on unzip it and in the rom there will be a file called MT6755_Android_scatter.txt or something along the lines of that
haidar123 said:
twrp can be found here:
for the scatter file you need to download the rom you are currently on unzip it and in the rom there will be a file called MT6755_Android_scatter.txt or something along the lines of that
Click to expand...
Click to collapse
I have tried a different way no via cmd with adb...
And I followed the steps meticulously - unlocked bootloader etc, but I get to the "writing recovery part" -
And it says FAILED (remote not allowed in locked state)
I don't get it! =(
I have unlocked bootloader, I have installed drivers, I did EVERYTHING...
Any advice?
Pikachu666 said:
I have tried a different way no via cmd with adb...
And I followed the steps meticulously - unlocked bootloader etc, but I get to the "writing recovery part" -
And it says FAILED (remote not allowed in locked state)
I don't get it! =(
I have unlocked bootloader, I have installed drivers, I did EVERYTHING...
Any advice?
Click to expand...
Click to collapse
Go to spflash tools click scatter loading file and find the file in the rom you have downloaded then select it. Then uncheck everything and click on recovery and select the twrp.img. turn your phone off press download and connect your phone
haidar123 said:
Go to spflash tools click scatter loading file and find the file in the rom you have downloaded then select it. Then uncheck everything and click on recovery and select the twrp.img. turn your phone off press download and connect your phone
Click to expand...
Click to collapse
I only have a twrp img file
I don't have anything that is a scatter file - When I downloaded twrp img from the official site it came with no scatter file and I don't know how to obtain it =(
Pikachu666 said:
I only have a twrp img file
I don't have anything that is a scatter file - When I downloaded twrp img from the official site it came with no scatter file and I don't know how to obtain it =(
Click to expand...
Click to collapse
for the scatter file you need to download the rom you are currently on unzip it and in the rom there will be a file called MT6755_Android_scatter.txt or something along the lines of that
Go to settings > about phone and tell me build number and i will find you a link to the rom which will contain scatter file
haidar123 said:
for the scatter file you need to download the rom you are currently on unzip it and in the rom there will be a file called MT6755_Android_scatter.txt or something along the lines of that
Go to settings > about phone and tell me build number and i will find you a link to the rom which will contain scatter file
Click to expand...
Click to collapse
I don't have a rom, sorry i'm abit of a noob...
but my phone build Elephone_P9000_20170904
Pikachu666 said:
I don't have a rom, sorry i'm abit of a noob...
but my phone build Elephone_P9000_20170904
Click to expand...
Click to collapse
http://bbs.elephone.hk/thread-13874-1-1.html#.WbE_GKhSyUl
this link contains the rom you require and instructions
haidar123 said:
http://bbs.elephone.hk/thread-13874-1-1.html#.WbE_GKhSyUl
this link contains the rom you require and instructions
Click to expand...
Click to collapse
Thank you, if I do manage to install twrp and supersu,
will it factory reset my phone?
Or do I keep all apps settings amd just carry on, with the only difference being root?
Pikachu666 said:
Thank you, if I do manage to install twrp and supersu,
will it factory reset my phone?
Or do I keep all apps settings amd just carry on, with the only difference being root?
Click to expand...
Click to collapse
If you uncheck everything and change the recovery to twrp then it will keep everything if you leave all boxes checked then everything will be deleted.
haidar123 said:
http://bbs.elephone.hk/thread-13874-1-1.html#.WbE_GKhSyUl
this link contains the rom you require and instructions
Click to expand...
Click to collapse
haidar123 said:
If you uncheck everything and change the recovery to twrp then it will keep everything if you leave all boxes checked then everything will be deleted.
Click to expand...
Click to collapse
Okay so got all that. now on sp tools when i plug phone in after download, it doesnt do anything...
Ive tried it with phone off and phone on. Doesnt acknowledge its plugged in on the flash tool
Pikachu666 said:
Okay so got all that. now on sp tools when i plug phone in after download, it doesnt do anything...
Ive tried it with phone off and phone on. Doesnt acknowledge its plugged in on the flash tool
Click to expand...
Click to collapse
The drivers havent been installed correctly. The link i sent before will show how to install them.
haidar123 said:
The drivers havent been installed correctly. The link i sent before will show how to install them.
Click to expand...
Click to collapse
Im following the tutorial but it doesnt work for me how it did on the tutorial, when I install nothing happens, and when I plug in turned off phone nothing happens.
Pikachu666 said:
Im following the tutorial but it doesnt work for me how it did on the tutorial, when I install nothing happens, and when I plug in turned off phone nothing happens.
Click to expand...
Click to collapse
If your're on windows 10 try finding a machine with windows 7 or xp. If not search the internet and there will be other guides. It took me quite a while to get the drivers to work on windows 10 i cant remember how i did it
haidar123 said:
If your're on windows 10 try finding a machine with windows 7 or xp. If not search the internet and there will be other guides. It took me quite a while to get the drivers to work on windows 10 i cant remember how i did it
Click to expand...
Click to collapse
I ran the installer and it stated that it had installed the mediatek drivers, but in device manager it is not there. SO frustrating lol, gonna try manually install from legacy
haidar123 said:
If your're on windows 10 try finding a machine with windows 7 or xp. If not search the internet and there will be other guides. It took me quite a while to get the drivers to work on windows 10 i cant remember how i did it
Click to expand...
Click to collapse
Still no luck, I get a device cannot start code 10
Pikachu666 said:
Still no luck, I get a device cannot start code 10
Click to expand...
Click to collapse
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
haidar123 said:
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Click to expand...
Click to collapse
Okay so, I have now got twrp downloaded.
I have supersu on my internal storage.
Now I press volup + power to enter twrp recovery - no does not work I just get elephone logo, then I release power and get no command?
Ive came so far and now am stuck again lol
I try to flash Oxygen Os rom for my device mi 8 (a idiot youtuber said that can be flash in all devices) and result that my devices stuck on miui with android 8 and can't upload or flash any rom than android 8. Can someone tell me what i have to do or have a guide
Sorry for my bad English
Can you acess TWRP?
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatible ROM with this tool.
HugoSilva said:
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatib
Click to expand...
Click to collapse
HugoSilva said:
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatible ROM with this tool.
Click to expand...
Click to collapse
HugoSilva said:
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatible ROM with this too
Click to expand...
Click to collapse
Thanks bro, but actually i have to solve my problem follow this guy https://forum.xda-developers.com/t/for-people-stuck-on-oreo-firmware-poco-f1.4233085/ and well, it not working, i don't know what i have to do with your guide, your program, can u explain me how to use this pls
Mkuong said:
Thanks bro, but actually i have to solve my problem follow this guy https://forum.xda-developers.com/t/for-people-stuck-on-oreo-firmware-poco-f1.4233085/ and well, it not working, i don't know what i have to do with your guide, your program, can u explain me how to use this pls
Click to expand...
Click to collapse
the link you provide is for Poco F1
With the program i sent you you can flash original firmware to your phone.
Just plug your phone to PC then open fastboot mode ( POWER + DOWN) and then open the program, than flash original firmware!
Should work