[Q] Has anyone upgraded to Xposed 80? - T-Mobile LG V10 Q&A, Help & Troubleshooting

Just wondering if we should update to the newest version of Xposed now that it takes LG devices into account.

Yup. Everything works fine.

Does it still break wifi calling?

I don't know, why don't you test and let us know? I'm running my own ROM on wich WiFi Calling works with Xposed, so I can't test it.

rawdikrik said:
Just wondering if we should update to the newest version of Xposed now that it takes LG devices into account.
Click to expand...
Click to collapse
Yes I have, haven't noticed any difference yet... 79 & 80 both ran/running great.
Common sense isn't all that common

Had issues with my camera and lagging.. Reverted back for now.

Zero issues here. Must be the ROM you're running.

No problems here at all, everything works as it should including wifi calling.

On stock rom. Was getting trusted face fc's too.

That's likely why. Xposed breaks some things (like WiFi Calling) on odexed ROMs. Switch to my ROM.

Yeah I know, but I really don't like rom flashing.. I just went back to 78 since I no longer have a copy of 79.. I have all of my mods done on stock and really don't have anytime for remodding atm..

You can flash my ROM over stock with no issues. Make a TWRP backup and if it doesn't work out, you can just restore.

I know but I have my personal unreleased system mods that flashing would overwrite and then I'd have to remod all the deodexed apps I have modded.. Thanks, I may try it in the future if I get time to work on my phone hobbies again..

Related

[Q] Wifi problems

my wifi doesnt work right. it will connect for a few minutes then it just stops working. i have cm 7.0.3., radio 7.08.35 and kernel 2.6.32.17 by miguel. i have done wipes and have tried a few different kernels. wifi will work for a few minutes then just stop. if i turn off wifi for a while and turn it back on it will work for a few minutes again. anybody have any advice?
As an update I flashed the salsa rom and its required kernel and wifi works fine now. However, I don't like this rom very much. I like CM. Does anyone know of a good working cm rom and kernel combination? I also have updated my radio to 7.15... Thanks
tried cm again and the same issue is back. cm 7.0.3-slide rom, 2.6.32.17-cyanogen mod-g46ca326 [email protected] #1 kernel, 7.15.35.16 radio. i cant understand what is going on
try the old CM6 and its variations? if you don't like Sense roms, then the froyo roms are the only one i had no wifi problems (other than Sense roms).
Try one of the newer CM roms (7.1 RC1 for instance). I used to have this problem all the time on CM7, but after HTC released the drivers for this device out to the community and then it was incorporated into CM7 I have not had problems with Wifi since.
I don't honestly know when that actually happened, but I bellieve it was after 7.0.3. I have been running 7.1 RC1 ever since the day it came out and have not had the problem at all. It is possible that may work for you.
Here is a link to it, which I just got from the main thread. CM7.1RC1
i will try it now. thank you for your help.
tried it. same problems
I've also had this same problem with both roms. I don't know much but I would say this isn't just a CM7.1 or Salsa problem, it seems to be a problem with either 2.3 or kernel compatibility with our beloved MT3G.
I think you are definitely right that it is a problem with 2.3 and how it works with the slide but it is a VERY hit and miss issue. Like I say, I had the problem with every CM7 nightly up through like 80 something and then those drivers were released and it started working for me. I am not sure if I did something different when I flashed the ROM or not but I was ecstatic when it did start working. Hopefully you guys are able to get it worked out, I know how frustrating it is. I went without Wifi for quite some time just because I liked CM7 that much but I am much happier with it working.
One other thing to try (again since I am no longer having this problem I am trying to think of things that I have done) is to be sure you have the latest radio flashed that was pulled from the 2.2.1 build. I have always had that radio so it is not something I often consider, but be sure you have flashed that. I will let you know if I can think of anything else.
There were two issues opened for this since the CM7 nightlies have been coming out. They are
http://code.google.com/p/cyanogenmod/issues/detail?id=3304
and
http://code.google.com/p/cyanogenmod/issues/detail?id=2153
It may be worth your noting in them that you have problems with the newer builds. I am not sure if they have fallen off the map yet as problems, but if so you may need to resurface in order for CM to fix them.
I had this same issue back on CM.
I was able to resolve it by installing S-Off through AlphaRev. Once this was done there are two wifi files that need to be replaced. They are ripped straight from the OTA rom.
I'm currently running CM7 nightly 124 and have not had an issue.
Sent from my T-Mobile myTouch 3G Slide using XDA App
poormanq45 said:
I had this same issue back on CM.
I was able to resolve it by installing S-Off through AlphaRev. Once this was done there are two wifi files that need to be replaced. They are ripped straight from the OTA rom.
I'm currently running CM7 nightly 124 and have not had an issue.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Can you please expand? I am interested.
i flashed cm 6 and it is working now. i have the latest radio. i would also like some more info on these wifi files. also i tried to s off the other day but it said my hboot wasnt supported?
Kevc44485 said:
i flashed cm 6 and it is working now. i have the latest radio. i would also like some more info on these wifi files. also i tried to s off the other day but it said my hboot wasnt supported?
Click to expand...
Click to collapse
Did you do the official T-Mobile 2.2 update? That updates the hboot and the latest hboot isn't supported. You can push these files in recovery. You just got to mount system in recovery and push using adb.

facebook not working over wifi (but works over 3g)

firefox and a few other apps on my phone dont seem to work on wifi but work fine on 3g.
I am running a flashed (to cricket) and rooted tbolt (with all the proxies for cricket service on the 35 dollar plan) currently running
sky raider zeus 1.3
android 2.3.4
sense version 2.1
2.6.35.10 kernel
pri version 1.41.02 1.64_002
friend stream works fine over wifi, as well as all but a few apps (one comes to mind)
I have tried it on a few networks and no difference, also i have updated the facebook app as well
any ideas?
You could try to reflash or reinstall those apps
i forgot to say,
I have reinstalled roms, apps, cleared the cache, tried different roms, radios, networks..... I am baffled
anyone???
apps soo far are
Facebook (app only)
Craigsphone (craigslist app)
DH (datehookup, dating website app)
Sorry I can't answer your question, but I have a question of my own.
Was the custom rom on your phone when you flashed it successfully, or was it the stock rom at the time?
Thanks, and I hope you find your solution.
joarce said:
Sorry I can't answer your question, but I have a question of my own.
Was the custom rom on your phone when you flashed it successfully, or was it the stock rom at the time?
Thanks, and I hope you find your solution.
Click to expand...
Click to collapse
My phone was completely stock when i got it
I rooted it and flashed it to cricket and started loading roms
Jester1614 said:
My phone was completely stock when i got it
I rooted it and flashed it to cricket and started loading roms
Click to expand...
Click to collapse
sorry just re-read your post. The phone was rooted prior to the flash to cricket and during the process I flashed the synergy infected rom.
I have now restored the synergy infected rom and it had a working (over wifi) version of facebook.
So I now know it is a facebook app issue and not an issue with my phone
Several other folks (unrooted) are having similar issues; just check the Facebook app reviews. I've been having similar difficulty with a handful of other apps (just Wikipedia and Google Reader so far, though Wikipedia's last update resolved it).

[Q] Disable ongoing wifi notification with root?

I have searched and have been unable to find anything about a permanent fix for the ongoing wifi notification (not the popup, which is easy to disable). The SQLite fix doesn't work after a reboot, and killing the android system process doesn't work after any wifi status change, either. Is there a way to remove this on an otherwise stock rooted rom (the latest OTA)? I don't mind flashing a patch or editing system files....
I don't think that there is any way to permanently remove this without flashing a ROM. I would just pull the trigger and unlock the bootloader...then you can flash ROMs and benefit from all the features they offer.
Yea if you like the stock look there is always cleanrom but I think a rom is the only way to remove it.
Sent from my SCH-I605 using Tapatalk 2
This on going notification was the one annoyance that made me finally flash a ROM. Nearly every other issue I had with stock rooted could be fixed with small modifications to either FlashBar or SystemUI.apk. Was really hoping someone would release a MOD to fix it, but eventually gave up waiting and flashed a ROM.
Sent from my SCH-I605 using Tapatalk 2
No rom is needed. A mod can be flashed, and/or Xposed can be used, although a module will need to be built if it doesn't exist.
adrynalyne said:
No rom is needed. A mod can be flashed, and/or Xposed can be used, although a module will need to be built if it doesn't exist.
Click to expand...
Click to collapse
Are you aware of one that exists that I can flash over my stock rom?
How is it almost October 2013 and we still don't have a fix for this? There's not even an Xposed module! :crying:
I am looking for this too? Can anyone help me out? I flashed jedi rom x20, but for reason it make my 3d games play a tad slower. I would like to stay on the stock rom.
MasonRyan said:
I am looking for this too? Can anyone help me out? I flashed jedi rom x20, but for reason it make my 3d games play a tad slower. I would like to stay on the stock rom.
Click to expand...
Click to collapse
I gave up and went back to AOSP based ROM. When I switched to the Note II from the S3 (not by choice), I didn't realize there would be so fewer devs working on this device, comparatively. :\
can't you disable this in tweakbox? i forget since i haven't used that module in a long time

[Q] kit-kat rom with working wifi?

So I've been working on my dna for about 4 days now trying to get a kit-kat rom that has working wifi on it. But as I've read I don't think one exist. Can anyone confirm this? I was on a NOS rom before that worked perfectly.
Also, been trying to update my baseband (to fix wifi?) but nothing seems to work. I keep getting a fail message when the tool kits try push the zip through.
Error messages and phone details are attached.
Thank you in advance for any help and suggestions you guys can offer.
tommynox said:
So I've been working on my dna for about 4 days now trying to get a kit-kat rom that has working wifi on it. But as I've read I don't think one exist. Can anyone confirm this? I was on a NOS rom before that worked perfectly.
Also, been trying to update my baseband (to fix wifi?) but nothing seems to work. I keep getting a fail message when the tool kits try push the zip through.
Error messages and phone details are attached.
Thank you in advance for any help and suggestions you guys can offer.
Click to expand...
Click to collapse
To varying degrees, WiFi works on all KitKat ROMs, with the exception of CM11 (at least that's been my experience). I've tried all of them, the two that I've found to be the best are Slimkat and AOSPA. Both of those worked best on my DNA.
As far as updating your radio is concerned, couldn't you use an app like Flashify?
In the end, I actually use a 4.2.2 ROM because everything works - and the WiFi/LTE is very stable. I currently use ViperDNA 2.5.2. Having the latest and greatest ROM isn't all that awesome if some of it doesn't work or is unstable.
Yehudah said:
To varying degrees, WiFi works on all KitKat ROMs, with the exception of CM11 (at least that's been my experience). I've tried all of them, the two that I've found to be the best are Slimkat and AOSPA. Both of those worked best on my DNA.
As far as updating your radio is concerned, couldn't you use an app like Flashify?
In the end, I actually use a 4.2.2 ROM because everything works - and the WiFi/LTE is very stable. I currently use ViperDNA 2.5.2. Having the latest and greatest ROM isn't all that awesome if some of it doesn't work or is unstable.
Click to expand...
Click to collapse
Flashify? Thats the first time I've seen that. I look into it, Thanks!
As for Roms, this whole mess started when I wanted to get the newer "Video Highlight" Feature that allows you to add your own music.
Im going to look into some other 4.2.2 ROMS and see what I can find. Im really digging Kit-Kat though. If anyone has a fave that they like please let me know.
Thanks for the help, Yehudah!
tommynox said:
Flashify? Thats the first time I've seen that. I look into it, Thanks!
As for Roms, this whole mess started when I wanted to get the newer "Video Highlight" Feature that allows you to add your own music.
Im going to look into some other 4.2.2 ROMS and see what I can find. Im really digging Kit-Kat though. If anyone has a fave that they like please let me know.
Thanks for the help, Yehudah!
Click to expand...
Click to collapse
My preference is ViperDNA 2.5.2. It's a Sense5 4.2.2 ROM with the Aroma installer. So you can install or not install as much or as little of the entire package as you like. I happen to like light ROMs, so I remove almost everything and only install stuff I use.
Haven't used any sense based KitKat roms, but I've never had a WiFi issue on cm or aosp based kk roms.
I use the viper 3.0.1 not updating to the newest version yet I'm letting them work some more bugs out.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Official Build ATT 3.38.502.12 ROM 7-12-2016

This ROM has been tested and retested...IF your wanting tweaks etc DO NOT FLASH OR ASK FOR THEM THERE ARE OTHER ROMS WITH YOUR WANTS AND DESIRES,DO NOT USE ANY PART OF THIS ROM WITHOUT PERMISSION, IF your wanting to use another kernel (99% stock is included) etc,DONT ASK HERE IF ISSUES ARISE (ASK THE KERNEL DEV) Folks who use this want a clean stable ROM.
Whats in this:
Nothing fancy...Just a clean stable build:
Official release
Debloated
Speed tweaks
Battery tweaks
CIQ Removed
Camera tweaks
ATT 3.38.502.12 : ROM DOWNLOAD
Changes:
7-01-2016: Initial release
7-12-2016: Fixed USB Connection
Known bugs:
None that I know of
Finally
Getting slow in my old age...
ZeRo2o9 said:
Finally
Click to expand...
Click to collapse
So anyone else try this?
Weird issue, I no long have the option to access my phone from a computer. It just charges. Same issue with 3 cables on 2 computers. Tried multiple USB ports too. Normally a box would pop up asking how you wanted to treat the connection. Now nothing comes up. Flashed rom 3 times, full wiping it once. Worked fine before flashing this rom. Anyone else having this issue?
Know the issue uploading fixed build now...Apologies folks
fps_pete said:
Weird issue, I no long have the option to access my phone from a computer. It just charges. Same issue with 3 cables on 2 computers. Tried multiple USB ports too. Normally a box would pop up asking how you wanted to treat the connection. Now nothing comes up. Flashed rom 3 times, full wiping it once. Worked fine before flashing this rom. Anyone else having this issue?
Click to expand...
Click to collapse
Fixed build released...Apologies
No worries!! Thanks for the fix =)
Wonders_Never_Cease said:
Fixed build released...Apologies
Click to expand...
Click to collapse
I may start playing with some Sense 8 things for this device...maybe...
Dumb question... Does this update the firmware. I ask because for ViperOne, you have to update the firmware before you flash the rom.
No and if flashed a euro firmware.. I suggest you RUU back to ATT version.. Have been issues if this is not done with signal issues.
23rdstreet said:
Dumb question... Does this update the firmware. I ask because for ViperOne, you have to update the firmware before you flash the rom.
Click to expand...
Click to collapse
"Nothing fancy...Just a clean stable build:
Official release
Debloated
Speed tweaks
Battery tweaks
CIQ Removed
Camera tweaks
ATT 3.38.502.12"
Since this is an official release, is it safe to flash when S-on?
I still have all the boat after flashing. You got rid of it?
I got so used to dang Sammy phones. My HTC is rooted, but can someone point me to a quick tut on how to ROM flash? I have this file downloaded & ready to go. Thanks in advance!
~Vol
Wonders_Never_Cease said:
No and if flashed a euro firmware.. I suggest you RUU back to ATT version.. Have been issues if this is not done with signal issues.
23rdstreet said:
Dumb question... Does this update the firmware. I ask because for ViperOne, you have to update the firmware before you flash the rom.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I was impatient and flashed atop the international 3.35 firmware. Everything flashed fine and came back up. But it certainly was glitchy. I definitely do not recommend doing it this way.
Dont see why not..testers were s-on
Soundwve said:
"Nothing fancy...Just a clean stable build:
Official release
Debloated
Speed tweaks
Battery tweaks
CIQ Removed
Camera tweaks
ATT 3.38.502.12"
Since this is an official release, is it safe to flash when S-on?
Click to expand...
Click to collapse
Debloated all the extra things from att yes..few apps are required for other apps to function correctly...Anything else you want to remove do so at own risk of breeaking other things...if you did not do a wipe and dirty flashed it does not remove bloat.Removed 252mb of ATT bloatware...And since coming or going to the euro builds they will not work properly with ATT in many aspects just an fyi..Some folks use the apps I left in which is minimal listed below.
Caller Name ID
KeyVPN
Kid Mode
News Republic
Polaris Office
Tsk_Tsk_Tsk said:
I still have all the boat after flashing. You got rid of it?
Click to expand...
Click to collapse
Had warned about that..lol.. now ya see why..
23rdstreet said:
I was impatient and flashed atop the international 3.35 firmware. Everything flashed fine and came back up. But it certainly was glitchy. I definitely do not recommend doing it this way.
Click to expand...
Click to collapse

Categories

Resources