Hope someone can help me, but I got this on my phone and I hope I can fix it.
Jacob_Bentzen said:
Hope someone can help me, but I got this on my phone and I hope I can fix it.
Click to expand...
Click to collapse
Hey,
As what I've seen in the tear down videos, the plastic corner is part of the entire inner body, and if you want it fixed, the entire phone must be dissembled and the inner body replaced with a new one. If you do this in a uncertified repair shop, you can forget about water resistant part of the phone specifications. The metal part by my opinion can be replaced without full phone disassembly.
Actually I dropped mine with a tpu case, and I can see a small deformation on the metal part only too.. (on almost the same place like yours)
r0gger said:
Hey,
As what I've seen in the tear down videos, the plastic corner is part of the entire inner body, and if you want it fixed, the entire phone must be dissembled and the inner body replaced with a new one. If you do this in a uncertified repair shop, you can forget about water resistant part of the phone specifications. The metal part by my opinion can be replaced without full phone disassembly.
Actually I dropped mine with a tpu case, and I can see a small deformation on the metal part only too.. (on almost the same place like yours)
Click to expand...
Click to collapse
That sounds expensive
If your phone was to say "brake" due to manufacture fault and you take your phone back to where you got it, you might just get a replacement. Wink wink.
Sparksltd said:
If your phone was to say "brake" due to manufacture fault and you take your phone back to where you got it, you might just get a replacement. Wink wink.
Click to expand...
Click to collapse
thats too late when it has already fell to the ground, with marks like that there will be straight no.
Its not Sony's fault you dropped it, and they dont know if it was "broken" before the fall or not, thus they wont replace it.
I am not saying it is like this all around the world, but we operate by these guidelines where i work, and they are provided by Sony, and thats what I know.
Heya.
I have same problem with my 6683. Any idea where I can find an inner metal frame for it so I can change it myself, or with someone from London, which I assume I'll find here, on XDA Developers forum and wants to give it a try, or has already done this magic before?
Cheers.
Actually, corners are sold separately, depends on where you shop. I know witrigs.com has them, 4 corners for a set.
can the 4 corner parts be replaced without damaging water resist
Witrigs sells the whole frame for 17 USD. It's listed as "OEM Middle Frame Replacement for Sony Xperia Z5 Premium COLOR". I ordered mine and couldnt be happier with it, my phone looks brand new
They also sell the corners but they're about 4 USD, so the full frame is a better value.
Thank you
I already purchased some parts for another phone and they came fast enough. I enjoyed the experience with them and I'm pleased to recommend as a trustful company.
Now, I just need to save some money to repair all my phones owned in the last years.
Hopefully, soon we won't be needing them -
now-you-can-protect-your-phone-from-falls-with-this-airbag-case-that-pops .
Related
Hey guys,
My white unlocked Hero has sustained some nasty body scratches plus it is starting to turn yellow. I'm considering a full body replacement. I was only able to find this:
http://cgi.ebay.com/GENINUE-HOUSING-FACEPLATE-FACIA-GOOGLE-G3-HTC-
HERO-WT_W0QQitemZ280402919652QQcmdZViewItemQQptZPDA_Accessories?hash=item41495100e4
Do you think that it's going to be as good as the original one? The seller claims that it's genuine, What do you think?
I found a site that has both the black and white housing for the gsm hero.
http://www.truesupplier.com/faceplate-housing-cover-for-htc-hero-g2-touch-white-color-pr-18489.html
How do I know that it's genuine? or at least as good as the original HTC cover?
slimfady said:
How do I know that it's genuine?
Click to expand...
Click to collapse
The web page is called "truesupplier.com". OF COURSE its genuine
How hard is it to change the housing anyway?
by changing housing you will probably break phone trust me ... and truesupplier housing is oem not genuine by looks of it..
He might not break it if he's careful, and has the proper tools. I've taken apart a few phones without causing any problems.
So unless i'm handy at doing these things, I should not do it myself?
What if I have our local HTC agent do it? Will it at least look as good as new?
i have the white hero and would love to put the black case on it.
the site mentioned above says it comes with the tools needed to change the cover, has any tried doing this?
i would love to go for it but don't want to f*&k my phone up!
i think its not so difficult to switch the cover if you take off the backcover there are 6 screws than open the case from the top of the mobile phone and pull it off
but becarefull maybe there are flatcables from die lcd or the trackball just make it slow and be carefull all the time
and maybe you can find a dissembly how to in google
peace
this site has pics of disassembly of a hero but it's in russian.
http://www.pdacenter.ru/razborka/htc_hero/
If you have to pry the phone open use something plastic so you dont damage the original case. Just in case the ebay housing is rubbish.
hawwy said:
by changing housing you will probably break phone trust me ... and truesupplier housing is oem not genuine by looks of it..
Click to expand...
Click to collapse
whats the difference between oem and genuine
any1 bought replacement white hoising? mine is getting yellow. so need to buy a back cover.
Thinking of buying one myself. I accidentally dropped mine on the tiled floors of my workplace toilets LOL (luckily not IN the toilet). so now there's a little nick on the top left corner of the case.
If this is your first time you will probably scratch the covers but nothing more. You need to be very patient and i will suggest take a look to a good tutorial.
iopened my hero 1 week ago and its so easy maybe in the next days i will upload a video in youtube
bye
I bought the ebay one. It's surprisingly well built (Not Teflon though).
The sad part is that my touch screen got screwed up during the installation. The bottom part of the screen is no longer functional and the sensitivity is messed up overall. Did the replacement in a local phone shop.
Now trying to find a way to fix it.
gyounut said:
iopened my hero 1 week ago and its so easy maybe in the next days i will upload a video in youtube
bye
Click to expand...
Click to collapse
That would be greatly appreciated!
hmm do you want to sell me your backplate of your old case? i need it please
and to fix your problem : you need a new display glas with digitizer
to remove your old glas: use a hairdryer, you have to heat up the old clue of the old glas and than you can push it easily out of the frame but be carefull not to heatup the frame, the plastic can deform, maybe you can cover it with aluminium foil from the kitchen
the video of the dissembly will be uploaded tomorrow by me
good night guys!
slimfady said:
I bought the ebay one. It's surprisingly well built (Not Teflon though).
The sad part is that my touch screen got screwed up during the installation. The bottom part of the screen is no longer functional and the sensitivity is messed up overall. Did the replacement in a local phone shop.
Now trying to find a way to fix it.
Click to expand...
Click to collapse
Where can I find new display glass for HTC hero? or can I just buy something generic?
I don't mind giving you my old backcover though it's in a very bad shape (which is why I wanted to replace it in the first place).
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Movisman said:
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Click to expand...
Click to collapse
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
0semaj0 said:
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
Click to expand...
Click to collapse
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Movisman said:
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Click to expand...
Click to collapse
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
0semaj0 said:
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
Click to expand...
Click to collapse
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Movisman said:
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Click to expand...
Click to collapse
Hey Movis,
What did you end up doing for your dropped phone?
I too have dropped my phone on its corner and the chrome along with the plastic is now dented.
Another one with the same problem here. I managed to create a bump on the chrome bezel.
Can I bump this post as I've also just noticed a ding in the corner of the chrome bezel was wondering if anyone had found a solution to this yet.? short of replacing the LCD/digitiser which like OPs phone are working fine. It's just cosmetic damage.
I once was in a bad mood and snapped a screen and backing/housing in half.I can't remember exactly,but I'm thinking the chrome bit may be part of the thin metal casing/housing that is glue taped onto the screen.
You separate the screen from the housing by using a hot air gun sparingly.
If you look back at a motherboard thread I was involved in,a person on here called Roger put up a great video tutorial link that may answer all your questions...
Sent from my GT-I9100
Ah cheers for the reply. Had a look at the mobo post you were involved in followed it to the link and coincidentally that's the exact video I watched last night. Very good video good detail and instructions. But its the black one he is stripping down so he makes no reference to the bezel which afaik is only used on the white ones.
Sent from my GT-I9100 using xda premium
I've not seen the chrome bit listed separately,so I guess its part of the metal top housing that the LCD is glued to.I've got a white one and its got a ding on it too.
You could email Samsung to see if you can get the part,but I think its not worth risking cracking the screen and you probably couldn't resuse / would get that stupid gluey tape stuff.
Sent from my GT-I9100
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
vyks10 said:
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
Click to expand...
Click to collapse
Hi, will the heat actually damage the screen? I saw some posts mentioning about putting it into the oven and such. It sounded very intense but if it works without damaging the screen, i might give it a try. Facing the same situation as yours. Scratches and dents all over my front chrome bezel.
Well after having my z ultra for a month I decided to go nearly case less (have the Incipio Watson case) using a thin case, I managed to crack the glass over the screen in my pocket which renders the entire phone useless. I do realize that it was my fault for going without a case and not being extremely careful. But now that this has happened to me I want to let you guys know the after effects. Like I said I only cracked the top layer glass but due to design the touch sensitive portion also is damaged. They sandwiched the glass, digitizer, and lcd together as one unit with the digitizer glued directly to the glass so once cracked the entire phone has to be disassembled and glass, digitizer, and lcd has to be replaced as a assembly ($250us). This is not a cheap repair and I've found one aftermarket online repair shop that's charging $300us to fix with no guarantees. And they don't say whether it will still be water proof after repair. I called Sony before they announced the phone here and they told me due to the fact that it isn't offered here they would have to send the phone to the country of origin for repair and it could take a month or two before it returns. And they didn't have a firm cost of repair but $189 normal phone cost. I think due to the thinness of the phone made it extremely fragile with super thin glass (which is how I think they managed the use of metals as stylus) covering the screen. So I recommend getting protection that adds rigidity and screen protection or getting added warranty coverage to the phone to avoid my bad luck.
If something goes wrong with my ultra I will run it over with my car and use my home insurance. 100$ and i get a new one. Here in Sweden it's called "bad luck" insurance
Sent from my C6833 using Tapatalk 4
Reb0rn said:
If something goes wrong with my ultra I will run it over with my car and use my home insurance. 100$ and i get a new one. Here in Sweden it's called "bad luck" insurance
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
Lmao
Sent from my C6806 using XDA Premium 4 mobile app
so do u think its worth it to get the $80 2-year insurance that the sony store offered me?
poisonsushi319 said:
so do u think its worth it to get the $80 2-year insurance that the sony store offered me?
Click to expand...
Click to collapse
I wish I had waited and got the lte version and insurance but it was looking like they weren't gonna release the beast for America. I hope now it'll be a quick turn around fix now tho. But considering getting the lte version with insurance.
Did you crack it from pocket pressure or something hit it? Was your phone screen facing outwards?
u misses out the most important thing ppl came to this kinda of post to see
everything u said was aleady clear by your title
so
we re all here to see,,,,
How did you break it ?
hutchins said:
Well after having my z ultra for a month I decided to go nearly case less (have the Incipio Watson case) using a thin case, I managed to crack the glass over the screen in my pocket which renders the entire phone useless. I do realize that it was my fault for going without a case and not being extremely careful. But now that this has happened to me I want to let you guys know the after effects. Like I said I only cracked the top layer glass but due to design the touch sensitive portion also is damaged. They sandwiched the glass, digitizer, and lcd together as one unit with the digitizer glued directly to the glass so once cracked the entire phone has to be disassembled and glass, digitizer, and lcd has to be replaced as a assembly ($250us). This is not a cheap repair and I've found one aftermarket online repair shop that's charging $300us to fix with no guarantees. And they don't say whether it will still be water proof after repair. I called Sony before they announced the phone here and they told me due to the fact that it isn't offered here they would have to send the phone to the country of origin for repair and it could take a month or two before it returns. And they didn't have a firm cost of repair but $189 normal phone cost. I think due to the thinness of the phone made it extremely fragile with super thin glass (which is how I think they managed the use of metals as stylus) covering the screen. So I recommend getting protection that adds rigidity and screen protection or getting added warranty coverage to the phone to avoid my bad luck.
Click to expand...
Click to collapse
Just to let you know, while looking on the brando site, I noticed they had Z ultra replacement screens for $150.... Don't know their quality, etc... but I did see them...
I only have a Skinomi clear skin on mine. Front pocket, back pocket daily phone. Even the hood of my car dropped on it while using it doing a repair. No issues here pretty tough. Although I was sure I cracked it after that incident.
Yeah, I'm on the same boat.. How tf did it break?
alias3800 said:
Yeah, I'm on the same boat.. How tf did it break?
Click to expand...
Click to collapse
Had it in the pocket screen faced towards my leg in a squatted position (wasn't thinking and frustrated at the same time from work) and cracked it from pressure/flexing presumably since all cracks stem from single crack at edge. What's crazy is that it seems to still be cracking even though im not using it. Have pictures in tow.
Did you squat really low? or like sitting down position kind of squat? Did you feel the pressure on in your pocket?
I have the phone as well and I only have a gel case, but I'm always scared to sit down with it cause I feel a bit of pressure when I do.
I don't wear skinny jeans, just regular straight jeans.
just bought my 2 year insurance from sony.
poisonsushi319 said:
just bought my 2 year insurance from sony.
Click to expand...
Click to collapse
What is the clause for the insurance ...like is accidental covered >> and how long do you have to decide when to get the insurnace ??
I have insuarance for one year. Here, in Spain, there is one for 69 euros. I have it for my Note 2 also and they changed entire sceen to it, 225 euros if i had to pay but insuarance paid.
trooper1414 said:
What is the clause for the insurance ...like is accidental covered >> and how long do you have to decide when to get the insurnace ??
Click to expand...
Click to collapse
its 2 years, u have 30 days from purchase date. it covers everything except stolen.
My rear glass is starting to separate from the frame in the top right corner.
Has anyone even heard of this problem on this phone?
Talked to Xperia Care today and it's covered under warranty but it's going to be a 14 working day turn around!
They are based in Texas, but since my phone originated from Hong Kong then it may take longer if parts differ.
It's not noticeable in the picture too bad but it's definitely coming apart because I feel the edge of the glass on my hand. Also it goes back in if I push it in but comes out eventually in a short amount of time...
ZPaul2Fresh8 said:
My rear glass is starting to separate from the frame in the top right corner.
Has anyone even heard of this problem on this phone?
Talked to Xperia Care today and it's covered under warranty but it's going to be a 14 working day turn around!
They are based in Texas, but since my phone originated from Hong Kong then it may take longer if parts differ.
It's not noticeable in the picture too bad but it's definitely coming apart because I feel the edge of the glass on my hand. Also it goes back in if I push it in but comes out eventually in a short amount of time...
Click to expand...
Click to collapse
its a known issue, its quite common actualy, i think if you look around some threads you will see alot of posts from unique users
edit- this should be covered by warrenty, Sony Customer Service Japan can conferm for this and same goes with Sony C-Service UK and also USA
I actually have the same problem on my Z2 , i previously owned the Xperia Z where i was experiencing same issue, and yes is covered under warranty....glass becomes unglued and separating from frame because NFC pins pushing the glass out, and phone generating heat during usage and this way the adhesive sticker inside becomes melt and glass starts to go out...this is a known issue even Sony knows about. I was able to hold 5 different Z2s and every one had the same issue, same area, different batch numbers.
The fifth one was yesterday in Orange ( operator) i dont know how to cerrectly call this showpiece? I mean the place where you can grap the phone and play with it... I noticed this problem on this phone....
I was analyzing this problem and i found that first area where it starts to come off is where the big flap is, thats the place where NFC pins are, and it continue to ungluing to the corner exactly like it is on your photo....Come on Sony!! Z1 was proof from this becasue of the middle frame and, this way nothing is pushing the glass out and also adhesive sticker is more wider.... I know what i am talking about i am gsm mechanic i was assembling both devices. But i dont know if you guys understand my English
NetSkill said:
I was analyzing this problem and i found that first area where it starts to come off is where the big flap is, thats the place where NFC pins are, and it continue to ungluing to the corner exactly like it is on your photo....Come on Sony!! Z1 was proof from this becasue of the middle frame and, this way nothing is pushing the glass out and also adhesive sticker is more wider.... I know what i am talking about i am gsm mechanic i was assembling both devices. But i dont know if you guys understand my English
Click to expand...
Click to collapse
You are pretty much right about that. My Z2 seems to have this problem in this particular area, I did not return the unit because I assume this eventually happens to all Z2.
Same thing I suffered with my old Z, I still don't understand why Sony does not come up with a better solution than gluing everything together.
I saw xperia z3 leaded pictures and from what seen i can say that z3 got fixed this issue because of different placement of NFC pins they paced them almost in the middle of the motherboard (same as z1) logically its a way better placement in the middle because its more dificult for those pins to lift both sides and top of the glass together at the same time than only right side in z / z2... Btw tomorrow i am going to repair another z2 customer reported this issue...
If you want you can go for warranty repair but if you are heavy gamer like me or doing something that heating up the device expect the same thing to happen in less than month.... The adhesive on the glass is really strong but after you heat up the glass, its not so strong then.... Its better to put locktide power flex(super glue) together with adhesive sticker and glue it this way..yeah then its almost impossible to get the glass off as the locktide is less,almost not sensitive to heat. I repaired mine z2 this way,like i sad i am gamer my phone is hot everyday and everithing is okayy
Edith
NetSkill said:
I saw xperia z3 leaded pictures and from what seen i can say that z3 got fixed this issue because of different placement of NFC pins they paced them almost in the middle of the motherboard (same as z1) logically its a way better placement in the middle because its more dificult for those pins to lift both sides and top of the glass together at the same time than only right side in z / z2... Btw tomorrow i am going to repair another z2 customer reported this issue...
If you want you can go for warranty repair but if you are heavy gamer like me or doing something that heating up the device expect the same thing to happen in less than month.... The adhesive on the glass is really strong but after you heat up the glass, its not so strong then.... Its better to put locktide power flex(super glue) together with adhesive sticker and glue it this way..yeah then its almost impossible to get the glass off as the locktide is less,almost not sensitive to heat. I repaired mine z2 this way,like i sad i am gamer my phone is hot everyday and everithing is okayy
Click to expand...
Click to collapse
Well I run 3 or 4 times per week and I use Nike+ so the phone gets pretty hot, and since I really don't have the skills to open my phone and glued again I will just ignore this issue (Hopefully is a minor issue) and I'm going to hope Sony has all this fixed by the time Z4 is released.
ZPaul2Fresh8 said:
My rear glass is starting to separate from the frame in the top right corner.
Has anyone even heard of this problem on this phone?
Talked to Xperia Care today and it's covered under warranty but it's going to be a 14 working day turn around!
They are based in Texas, but since my phone originated from Hong Kong then it may take longer if parts differ.
It's not noticeable in the picture too bad but it's definitely coming apart because I feel the edge of the glass on my hand. Also it goes back in if I push it in but comes out eventually in a short amount of time...
Click to expand...
Click to collapse
I had my phone mostly in Sony's charge dock for the last couple of months, using it as a wifi hotspot. When I took it out the other day, I thought the back seemed to bulge a bit. I only had it for ~6 months or so, and I remember thinking that the battery couldn't have gone bad already - since its known that bad batteries start to bulge...
Anyway, took it out of the charger again today to leave the house with it and found that the rear "glass" has separated from the frame by a lot and there's a 3mm gap to the frame on one side.
1) the back seems more flexible than glass would normally be? I think its not actually glass... (I know they build different models for different regions - this was purchased in Hong Kong)
2) if I push the edges of the back to the frame and hold a ruler to the back in either direction, there's a clear bulge forcing the back away from the phone.
3) what besides the battery in a phone can expand to the extent that it will push the rear panel off the phone?
The phone has never been dropped, its in absolutely new condition, aside from this annoying failure to stay together...
Thoughts of going back to Samsung with their swappable batteries are hard to suppress...
UK Warranty Refusing Repair
Hey Guys,
I am having the same issue with my Z2, it's about 8 months old. I sent it off last week and this week I was quoted £350 for a BRAND NEW DEVICE!
I phoned them and asked why and they said that they have deemed it to be accidental damage! They are escalating it currently but I fail to see how it COULD be accidental damage?! I have never dropped the phone or anything...
Can someone on here please confirm that their device was repaired under warranty? If so did you get a receipt/ invoice or anything with it? I would very much appreciate any help with getting Sony to fix my damn phone...
Dan
NJ72 said:
I was quoted £350 for a BRAND NEW DEVICE!
Click to expand...
Click to collapse
That's crazy! I paid €299 for mine NEW.
Almost same problem
I just got this Z2 since around 2 months, and just spotted that the rear glass is popping out of the frame. The device international and not under warranty, so will try to get back to Amazon. Any insights?
Pic: facebook.com/photo.php?fbid=10153081797391243&set=gm.898501176853924&type=1&theater
My friend had also such a problem. He decided to open the device by himself and then it cracked so go for warranty.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices
i have an experia z3 and the backglass and te frond glas got loose dindt get it fixed yet, i think its because the phone gets prity damn hot somtimes and becuase of the heat te glue wil meld and your screen and backcover wil come of and sony still needs to fix this problem
Rate this thread to express how you think the LG G6 feels in terms of quality. A higher rating indicates that it feels premium and high-quality (attention to detail is high, manufacturing defects don't exist, etc).
Then, drop a comment if you have anything to add!
The phone I ordered is the Ice Platinum.
The phone itself feels wonderful in the hand. I particularly love the bevel work along the sides of the phone. Everything feels very well polished.
The camera and finger print sensor are in a good place. The button feels very sturdy. No unusual clicking or hitching. Feels like it will stand years of use quite fine.
I am not sure what the back is made of. It's possible it's like the black and is made of glass due to the wireless charging. Either way, it feels very smooth to the touch. Doesn't have a metal texture at all, it feels like smooth glass. Everything on the phone is smooth for the most part except for where the bevels are. They have a bit of a polish though. The non-recessed finger print sensor and camera feel premium.
This is honestly one of the most well constructed phones I've ever owned. Look up G6 tear down on Youtube... they open up the phone and you can see the materials and they also scratch at the back to reveal the glass construction. It takes a beating.
I ordered the black (as always due to it matching everything and working well with cases that you can still see parts of the phone body (all cases pretty much... at least the top) and it feels perfect. Of course I put it in a case immediately and refused to use it until my case was on due to liking a thicker phone for holding purposes, but it feels natural just as my LG G2 that I am coming from.
I've had mine for 2 days now and coming from an iPhone the visual appeal of the phone is what made me switch over, along with the themes etc. As a first time Android user the go-to phone is usually a Samsung but I'm glad I got this device. I have to take extra care for now as I'm waiting for my phone case and tempered glass to come in the mail. This phone has a premium feel and I am happy
jakeyo said:
I've had mine for 2 days now and coming from an iPhone the visual appeal of the phone is what made me switch over, along with the themes etc. As a first time Android user the go-to phone is usually a Samsung but I'm glad I got this device. I have to take extra care for now as I'm waiting for my phone case and tempered glass to come in the mail. This phone has a premium feel and I am happy
Click to expand...
Click to collapse
You coming from Apple and not picking Samsung is huge. Seems like you have an objective POV and I think this was a good choice for your first time. You'll learn that there are other manufacturers other than Samsung that can deliver but if you're looking for something that can be a culmination I believe LG is the way to go.
?????
I dropped mine from one meter high on the concrete. The metal frame has marks on upper right and lower right corners, no sign of damage at the front and the back of the phone. MIL- STD is a must have.
Had mine since August (original had some possible defects). AT&T replaced it for free and this thing is absolutely amazing.
The build quality of it is incredible. I love the way the metal (Aluminum?) bezel feels. It's smooth and doesn't scrape my hand, the glass back has a nice, slight curve, doesn't crack easy, and is quite durable. The screen is great, especially how the way it matches exactly with the edge of the bezel.
That's all I have to say for now on the build quality, but I'll update this post with information later.
It has fallen from my hands couple of times, no cracks, no bumbs, and in the hands it feels amazing.. Quality feel for me is at highest range. ?
Powered by LG G6
Wi-Fi ko Kis Tarah hack kiya jaye
SIM card tray HS
Hello,
Sorry for my english...
I bought a new micro-sd card.
SIM and microSD drawer didn't want to pull out easily.
After having extracted the tray, to use it, I realized that it was broken. So I can't put it back on or use the phone.
I contacted the LG support, which tells me that this is not covered by the warranty, and it gives me an address to send for repair.
The repair estimate just returned... 270.40 €!!!!!!!!
They're changing the motherboard and the case !
I'm really angry with LG.
a piece of advice, don't use this drawer too often.
Why didnt you asked them first the costs of repair ? I never repair the phone before they tell me how much will it cost. And why didnt you try to get that drawer on ebay or something ? Lol :S
devaa01 said:
Why didnt you asked them first the costs of repair ? I never repair the phone before they tell me how much will it cost. And why didnt you try to get that drawer on ebay or something ? Lol :S
Click to expand...
Click to collapse
because I didn't have a choice, LG said no guarantee, here's the address or send your smartphone... Address where I had already sent my G4 (botloop).
Then, of course I tried, without dismantling, to remove this piece of plastic.... too stuck in the bottom...
Problem is, they disassembled the smartphone... what do I get? any pieces?
Bleudovergne said:
Hello,
Sorry for my english...
I bought a new micro-sd card.
SIM and microSD drawer didn't want to pull out easily.
After having extracted the tray, to use it, I realized that it was broken. So I can't put it back on or use the phone.
I contacted the LG support, which tells me that this is not covered by the warranty, and it gives me an address to send for repair.
The repair estimate just returned... 270.40 €!!!!!!!!
They're changing the motherboard and the case !
I'm really angry with LG.
a piece of advice, don't use this drawer too often.
Click to expand...
Click to collapse
Yeah I was told 2500 baht (that's about 50 English pounds) to open phone,then could be up to 200 pounds to repair depending if motherboard needs fixed,its a disgrace its not under warranty
Are you able to get the small piece of plastic out of the drawer that has snapped off? If you can then you can by replacement sim/sd tray on eBay for 10-15 Euro. Good luck.
A few weeks back I dropped my phone while riding my bike and after that a car went on it and it survived... I had a basic case on it... The phone's general built quality is dam good in my opinion... I've ordered a supcase to make my phone last a lot longer... Just hoping for bootlocker unlocking option on ds model.. hoping for the best