Hi, i have a problem with this tablet.
When i switch on it, it blocked itself at ANDROID_ screen.
I try to reset it (on+Home+back) but after flash it blocked itself at ANDROID_ screen.
The Device
Superpad 3
Technical Specification
Cpu: 1GHZ
Ram:256MB
Internal memory:2Gb
Card Reader Slot('s)=2
What Ports are available (USB(ODT, Standard, Mini) , RJ45, Audio, Power, Antenna (GPS etc.)
Usb=2 (normal usb)
Rj45=1
Jack audio=1
Jack power=1
GPS=external
HDMI=1(mini-Hdmi)
Software
OS: Android Froyo 2.2 v2.2 #4096
Please help me ^^"
It sounds like a boot lock up. Where you trying to root or something?
Please hit the thank you button if i helped!
I tried to change the firmware of this tablet with no result
Do you have still adb connection ?
^good question. Do u?
Please hit the thank you button if i helped!
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Hello,
I have the same model, and been looking for root.
Thanks.
MS!
prestigio 8.0 hd root (JB 4.2.1)
copy this file to sd card go to recovery and install
New firmware
New firmware available for our tablet:
PMP5588C_20140102_v1.0.42:
http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5588C/PMP5588C_20140102_v1.0.42.zip
1. New preinstalled applications
2. User agent profile for Android browser updated
3. APN/SPN files updated
4. Skype issue fixed
5. Video player issue fixed
6. Chrome browser bugs fixed
7. Sound Recorder issue fixed
8. Wi-Fi bugs fixed
9. Gallery issue fixed
10. System stability and speed improved
11. Other minor issues fixed
verification
Hello friends, i have problem with verification of modified or created own firmware on my PMP5588c duo, during instaling of this update from recovery, boot loader delet this instalation and displayes " validating error" Is possible break this validation? modified or choose other bootloader? sorry for multiple question. thanks for help David
Prestigio 5588c Rooting Issue
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Root for PMP5588c_Duo
AzahTabor said:
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Click to expand...
Click to collapse
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Zapryanov said:
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Click to expand...
Click to collapse
hey Z.
thank you for the guidance.. testing it now so will update shortly.. although the program thought I had a samsung note lol
ok, this is an update.. seems the program did not want to root my tablet. when I started it again, it classed it as a google device, but said connection failed due to cable instability.. guess I will have to try another way
double update... after leaving it for a few days, it seems to have wanted to work.. woohoo. thanks Z for the info
help with prestigio multipad 8.0 HD !!!
Welcome. I have a problem with this tablet.
Tablet died after a crash. There is no option to enter a Power + vol +
also does not move with the micro SD card from the system manufacturer Charges start-up screen and that's it. When connected to a PC saw it as m3-chip.
In total, I found drivers in Device Manager I did update the driver for the M3-chip and now the tablet is listed in my device manager as libusb- win 32 device. I found a program that detects such a connected tablet. The program is Amlogic Image Burning Tool v.1.6.2.2. For the time being this my progress stopped. I was trying to upload with this software firmware downloaded from the manufacturer's website dedicated for this device, but I get the message "find no upgrade" and do not know what to do. Can someone help me ??? I'm not an expert, and the above step I got reading the various forums. To my eye it looks as if they fell bootloader, but thanks to the above program to see the tablet (or rather its processor) and now combines where to download a bootloader to throw it out there and then be able to upload the system such as the sd card. Or is there some other program or a way to restore the dead to life my tablet ??? Can you help ???
1. Turn off the tablet (hold the power button and count to 12
2. Insert prepared SD card https://yadi.sk/d/_6VITNSbhKPyi
3. Press and hold the "Vol +", press "Power ON" for 2 sec.
4. Release all buttons and wait for boot TWRP (about 10 seconds)
5. In TWRP select Install -> update.zip
6. Reboot tablet
testatura said:
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Click to expand...
Click to collapse
Sorry Dude but it doesnt work ..... while updating abort... i tryed with all known firmware from the company ... kingoRoot KingRoot and also OneKlickRoot doesn´t work too. I´m Sad about that...
regards Michael
Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
same problem sansui etab 801 vp
curlyjoe123 said:
Update: I just got the original firmware sent via customer service.. but do not know if it would work or not.. Just updating..I'm scared cuz the firmware I flashed it with was for a Cortex A9 device.
I have a Sansui Etab 801 Cortex A8 Android Tablet. It got stuck in boot loop and after trying several firmwares which didnt work, kept asking for uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml etc file. After some search I came across a ROM, for Ramos tablet, I used it cuz it has the uImage_recovery, uImage, u-boot-aml-ucl.bin, factory_update_param.aml files etc. When I inserted it into the TF card and did an upgrade, the device would not start up at all. Just some lights on the controls.
When I insert into PC, it recognizes it as M3-chip, I found out about the AML flashing tool..I am stuck at "write data to ram failed" and I guess it is because of usb_spl.bin. Is there a way to create a separate usb_spl.bin for my device or it IS IT THE SAME FOR ALL TABLETS?
If it is the same for all device, thats a problem as I'm just stuck at write data to ram failed.
HELP!
I found out that the firmware I flashed it with was for a Cortex A9 device...
Thanks!
Click to expand...
Click to collapse
Hi,
I am now facing same problem withmy tablet sansui and I can't find a way to solve it.
Some of my friend recommended to use UBEROID but Iha ve my douts about it.
Did you found a solution?
hello community first of all im sorry if the post in the wrong section
secondly i have a tablet that when i turn on stuck at the first logo
which is "dual core aml-mx amllogic" this is what written on the logo
i don't know what is the problem i think that it needs a firmware
first problem i don't know how to backup this kind CPU firmware in case i find a working tablet same as mine to flash the working firmware to
i know how to do so for other brands like allwinner or rockychip but for this aml i don't know how
second problem i don't know how to flash a firmware to this CPU does it accept sd card flash firmware or usb and pc flash and how
plz anyone who know how to deal with this type of cpu or tablet help me
here is the tablest specification
borad : aml8726-mxs_mxl-mid-ref-86v_h-a-v1r1
touch flat : -8-6221 jyt
lcd flat : fpc7005013-a
camera flat :msd1115-qh86v-v13.0 blx.n
tablet only have power button and reset button "no volume up or down"
anything else needed plz reply to me with what other information needed
thanks you in advance and plz help me
ps : i recently downloaded a firmware from internet and tried to flash it with aml burning tool but the device seems to be disconnecting while flashing so the tablet now identified by the program but nothing appear on screen when trying to turn it on
anyone help plz :crying:
hello ,
i have lenovo tab A5500-HV with this details :
CPU : MTK 8382
Memory : 1G
Storage : 16G
Android : 4.4.2
i flashed it with a wrong firmware, it had a soft brick or something like that so i had to flash it again, i searched for the right firmware and downloaded it then i tried to flash put suddenly the tablet became unrecognizable on the computer and it doesn't do anything or respond to any action buttons click or charging, the screen is just black and there is no any change in it .
HELP PLEASE :crying::crying: !!
The tablet is stuck in a mode .
Download Mediatek drivers
Open Sim tray
Then use a paperclip to power off the tablet completely.
Then try flashing with correct firmware
i hope this helps