i was using odin trying to re install the stock firmwar and it comes up with this error: check fail device:3 binary:1 and on odin it says<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
help me please!
also i tried factory resseting it and i remove the os period ahh
clewesman said:
i was using odin trying to re install the stock firmwar and it comes up with this error: check fail device:3 binary:1 and on odin it says<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
help me please!
also i tried factory resseting it and i remove the os period ahh
Click to expand...
Click to collapse
Can you get into bootloader? If so fire up smart switch on your pc and click over to emergencey recovery and type in your model number and serial number all in capitals and it should download the software and flash it
I've had this happen too me twice,first make sure you flashing the correct firmware,mine worked once I had the official firmware and my phone wouldn't even enter recovery.
Related
I was flashing a firmware from "I9100GZCKH4" to "I9100GDXLP6_I9100GOLBLP6_XME" on my Samsung S II GT-I9100G, and it failed. Now the screen shows "SOFTWARE UPDATE FAIL"
Odin says...
Message
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GDXLP6_I9100GOLBLP6_I9100GDXLP6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> MLO
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Happen to me once..make sure KIES not running in background..if u dont know how to check, just uninstall KIES..dont worry, u can get KIES installer later with just google it..
Sent from my GT-I9100G using xda premium
Hello all,
I rooted my galaxy s3 and all went fine, then the battery died (battery is no longer in use) so i bought a new one and all was well, upon flashing stock rom, the write failed.
When booting the phone up it says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
(LONG DELAY HERE)
<OSM> I9305XXBLL5_I9305EVRBLL2_I9305BVBLL2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> recovery.img
<ID:0/005> modem.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I need help!
Bad flash wrong firmware or more likely file is corrupt .
Make sure Kies is not running as well .
jje
Hi
I have the following error when I try to install the correct firmware with odin 3.09
<ID:0/005> hidden.img
<ID:0/005> FAIL!
firmware: sammobile.com I9300XXUGNG3_I9300QXFGNG2_I9300XXUGNA8_HOME.tar.md5
I tried with Kies "Firmware upgrade and initialization "and gave an error at the end and did nothing
I tried another USB cable (original Samsung), another usb port ... same error
I installed TWRP Recovery and when I tried to format partitions data error "not found" I tried to mount but gave "not found" error
full log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNG3_I9300QXFGNG2_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what can i do to mek the phone working again?
thank you
Try the rescue firmware and pit, flashed with Odin. Search in general forum for the thread.
I bought gear s by a chinese rom so idecided to update my rom to my regional one
I downloaded odin and firmware as mentioned in sammobile page
and did the rest, now in downloading mode and after starting odin I am stuck for about two hours and nothing happened
here is odins dashboard:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R750XXU1BOA7_R750OJV1BOA7_R750XXU1BNL8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
and nothing then
the phone is downloading mode and of course connected yet
what should I do?
please help me
thanks in advance
Hello, my phone recently powered off by itself and when I powered it back on again it was stuck on the flashing Samsung logo. When I try to flash the stock firmware in odin it fails and I get the log below, help!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
debuffs said:
Hello, my phone recently powered off by itself and when I powered it back on again it was stuck on the flashing Samsung logo. When I try to flash the stock firmware in odin it fails and I get the log below, help!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You are flashing an older bootloader. That's why odin fails at sboot.bin.
You need to flash the latest firmware and it will work.